Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

This Government Contract opportunity from Department Of Defense was posted on September 19, 2017. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Aircraft Wheel Washer

Awarded
F7H2MS6287AW01Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811310
New
Kubota M8200 Clutch Replacement
Solicitation # kubota-m8200-clutch-replacement
Management & Training Corporation is soliciting bids for the clutch replacement of a Kubota M8200 tractor with front wheel assist, no cab or loader, located at the Earle C. Clements Job Corps Center in Morganfield, Kentucky. The scope of work requires the contractor to provide all transportation, labor, supervision, tools, and new manufacturer-specified parts to diagnose and repair the clutch assembly and power take-off system. Key technical requirements include disassembling tractor components, replacing friction discs, bearings, oil seals, and O-rings, resurfacing the flywheel, and replacing hydraulic pipes and filters as necessary. The contractor must verify proper clutch engagement and disengagement and test the PTO system under load to ensure the unit is restored to safe operating condition. This is a small business set-aside solicitation with a response deadline of November 3, 2026. Award will be based on best value, and bidders must submit a bid sheet, a completed supplier packet including a W-9 and self-certification form, and proof of insurance. The contract is subject to various federal regulations, including Service Contract Labor Standards under Wage Determination 2015-4687 Revision 31 for Kentucky, and FAR clauses regarding the utilization of small business concerns and combating trafficking in persons. Final acceptance of the work is contingent upon inspection by the Facility Maintenance Department to verify operational functionality and adherence to manufacturer specifications.
Earle C. Clements Job Corps Center

POSTED

about 3 hours ago

DEADLINE

in 3 days
NAICS: 811310
New
SLED
Asphalt Storage Tank Maintenance and Repair
Solicitation # 601320000072188
The Texas Department of Transportation (TxDOT) issued Invitation for Bid (IFB) 601320000072188 in October 2026 for the maintenance and repair of two Duraco Model 8250 asphalt storage tanks located at the Gonzales Maintenance Facility in District 13. The scope of work includes the cleaning of tanks, installation of new manway gaskets and other necessary seals, and the off-site transport and disposal of all removed materials in compliance with Texas Health and Safety Code Chapter 361. All work must be performed according to manufacturer recommendations and applicable standards, with a final inspection required by a TxDOT representative prior to invoicing. Responses are due by November 6, 2026, at 3:00 p.m. Central Time and must be submitted via the Euna Procurement portal. Bidders are required to provide a comprehensive submission including a price schedule in Excel format, qualifications and references, an approach to work, and mandatory certifications regarding child support obligations and legal eligibility. TxDOT will award the contract based on best value, primarily considering purchase price, compliance with specifications, and the risk of vendor non-performance. To pass the initial evaluation, vendors must maintain a performance rating of A, B, or C in the CPA Vendor Performance Tracking System. The selected vendor must adhere to strict insurance requirements, including policies from companies with an A.M. Best rating of A- or better, and maintain confidentiality regarding all TxDOT business information. Payments will be processed electronically in accordance with Texas Government Code Chapter 2251. Additionally, respondents must certify compliance with various state and federal laws, including the Texas Free Enterprise and Antitrust Act and Title VI assurances, while agreeing to prioritize the purchase of Texas-produced materials when available.
Texas Department of Transportation

POSTED

about 19 hours ago

DEADLINE

in 6 days
NAICS: 811310
New
SLED
Conveyance Maintenance Services
Solicitation # 26-1336
Chicago Public Schools is soliciting bids for Conveyance Maintenance Services under solicitation number 26-1336 to implement a comprehensive preventive maintenance program for conveyance equipment. The selected bidder will provide all labor, materials, and supervision necessary to ensure equipment remains safe and operational, adhering to the City of Chicago Municipal Code, ASME A17.1/CSA B44, ASME A17.3, and original equipment manufacturer standards. The contract includes a three-year initial term with the possibility of two automatic renewals of two years each. Services involve monthly preventive maintenance during normal working hours from 6:00 a.m. to 2:30 p.m., as well as 24/7 emergency callback support. Key deliverables include site-specific maintenance schedules, the use of CPS facilities software for reporting, and an annual Executive Summary Report based on a 7-point assessment rubric. The agreement will be awarded to the lowest, responsive, and responsible bidder based on evaluation factors including price, business stability, professional qualifications, past performance, and capacity. Bidders must submit a comprehensive package via Bonfire, including an Excel-based bid tabulation, audited financial statements for the last three fiscal years, three non-Board references, and a W-9 tax form. Compliance with MBE/WBE aspirational goals of 30% and 7% respectively is required, along with adherence to the Illinois Minimum Wage Law and various federal and state non-discrimination acts. Invoicing must be submitted electronically in PDF format, with payments processed according to the Local Government Prompt Payment Act. All shipments are designated as F.O.B. destination. The deadline for questions is November 6, 2026, and the final response deadline is November 20, 2026.
Chicago Public Schools

POSTED

about 21 hours ago

DEADLINE

in 20 days
NAICS: 811310
New
SLED
Annual Inspection/Maint. and Repair on Generator at FMS #8
Solicitation # SRC0000037488
Solicitation SRC0000037488 is for the annual inspection, maintenance, and repair of a Speed Air air compressor (Model 1WD44, SN: D063475) at FMS #8 in Gadsden, Alabama. The scope of work includes replacing belts, collecting oil samples, and installing filters, cabinet filter mats, and repair kits for the oil and thermostatic valves. A mandatory site visit is required on November 18, 2026, at 10:00 AM at 5319 Airport Road, Gadsden, Alabama. The response deadline is November 23, 2026, and all bids must be submitted electronically through the Alabama Buys portal. The contract is managed by the Army MCA and the State of Alabama, with a maximum total value of 25,000 dollars over a potential five-year period, subject to annual renewals. Award evaluation will be based on price reasonableness, cost realism, and supplier qualifications, including professional licenses and insurance. Vendors must comply with the Code of Alabama, including the Beason-Hammon Alabama Taxpayer and Citizen Protection Act and registration requirements for foreign corporations. Payment will be handled electronically via P-cards, EFT, or state-issued credit cards. Final acceptance of services is contingent upon a satisfactory inspection by the State of Alabama in accordance with the Universal Commerce Code.
Army MCA_App 01_Real Property Operations & Maintenance, State Military Department

POSTED

about 22 hours ago

DEADLINE

in 23 days
NAICS: 811310
New
SLED
Electrical & Automation Services
Solicitation # 9181
The City of Denton is soliciting proposals for Electrical and Automation Services to support 12 Wartsila 18V50SG units located at the Denton Energy Center. The selected contractor must ensure all equipment operates within Original Equipment Manufacturer specifications without voiding existing warranties. Key performance requirements include providing personnel and service offers within one week of notice and completing repairs and services within five weeks of evaluation. The City will award the contract based on best value, evaluating submissions through a weighted scoring system: 30% for schedule timeliness, 30% for compliance with specifications, 20% for indicators of probable performance, and 20% for total cost of ownership. Submissions must be made via IONWAVE or hard copy by December 2, 2026, at 2:00 PM CT. Hard copy responses must be sealed, limited to 200 pages, and bound only with staples or binder clips. Required documentation includes proof of Texas state registration, a conflict of interest questionnaire, and a safety record. The contractor must comply with Davis-Bacon prevailing wage rates, the Buy American Act, and ADA non-discrimination practices. Invoicing must be submitted to the City's Accounts Payable department within 30 calendar days of service completion, with payments processed within 30 days of receipt. All deliverables must be shipped with weather-resistant labeling and a packing slip to the designated Denton address.
City Of Denton

POSTED

1 day ago

DEADLINE

in about 1 month
NAICS: 811310
New
SLED
Chiller Maintenance Services
Solicitation # 26FS0006
Solicitation 26FS0006 is an Invitation for Bid issued by the California Department of Veterans Affairs (CalVet) for comprehensive maintenance and emergency repair services for chillers, Liebert units, and cooling towers at the Veterans Home of California-Fresno. The contract period is scheduled from January 1, 2027, through June 30, 2030. The scope of work includes annual and quarterly preventive maintenance, one-time evaporator tube cleaning and eddy current testing, and emergency repair services with a required two-hour response time. Key deliverables include annual leak detection reports per AQMD requirements and yearly oil sample lab analysis reports. The contract will be awarded to the lowest responsible bidder who complies with all requirements. Evaluation factors include price, responsibility, and responsiveness, with specific incentives and preferences applied for Disabled Veteran Business Enterprises (DVBE) and certified Small or Micro businesses. To be eligible, contractors must maintain an active C-20 license and technicians must hold EPA Section 608 Universal Technician Certification. Bidders are required to submit a mandatory Rate Sheet, signed Contractor Certification Clauses, and a Bidder Certification via email to Eric Dahmen by the November 4, 2026, deadline. Awarded contractors must adhere to prevailing wage laws under Labor Code Section 1770 and comply with all site security and health requirements at the Fresno facility.
California Department of Veterans Affairs

POSTED

1 day ago

DEADLINE

in 3 days

AI Contract Overview

Show more

This request for quotation is for the procurement of a new 3032 StingRay Retractable Turntable Aircraft Wheel Parts Washer or an equivalent model for the Kentucky Air National Guard in Louisville, Kentucky. The equipment must be new, as prototypes or refurbished units are prohibited, and must feature specific technical capabilities including a closed-loop zero discharge system, stainless steel construction, and an automated fresh water rinse cycle. Delivery is required FOB Destination within 30 days of the award. The acquisition is conducted under full and open competition using Simplified Acquisition Procedures, with the award based on the lowest priced, technically acceptable offer. Interested contractors must submit quotations via email to the contracting officer by August 22, 2017, including a completed pricing schedule, SAM representations and certifications, and lead time information. The procurement falls under NAICS code 811310 and is subject to various Federal Acquisition Regulation and Defense FAR Supplement clauses.

General Info

Contract Value

$98,952

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

Place of Performance

Kentucky Air National Guard 1101 Grade Lane, LOUISVILLE, KY, 40213, USA

Set-Aside

NONE

Award Issued Date

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseAwarded
Posted

Combined Synopsis

Awarded

Contract was awarded

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W7NA Uspfo Activity Kyang 123
Contacts2 people available
OfficeLOUISVILLE, KY, 40213-2614, USA
Office AddressLOUISVILLE, KY, 40213-2614, USA

Full Description

Show more
FBO Announcement: Combined Synopsis/Solicitation Action Code: Classification Code: H979 Subject: Aircraft Wheel Washer Solicitation Number: F7H2MS6287AW01 Response Date: August 22, 2017 4pm EST Contact Points: Anthony Hayden contact@example.gov Delivery shall be FOB Destination for the following items no later than 30 days ADC: Kentucky Air National Guard 1101 Grade Lane Louisville, KY 40213 Description: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6- Streamlined Procedures for evaluation and solicitation for Commercial Items- as Supplemented with additional information included in this notice. This announcement constitutes the only solicitation; Quotations are being requested and a separate written solicitation document will not be issued. The solicitation is being issued using Simplified Acquisition Procedures. This solicitation is a Request for Quotation (RFQ). The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC-79) Offerors must submit all questions concerning this solicitation in writing to the Contracting Officer. All responses to the questions will be made in writing, without identification of the questioner, and be included in an amendment to the solicitation. Even if provided in other form, only the question responses included in the amendment to the solicitation will govern performance of the contract. The associated North American Industrial Classification System (NAICS) code for this procurement is 811310 with a small business size standard of 7.5M. This acquisition is being procured using full and open competition and all interested parties may submit a quotation for consideration *** All interested Contractors shall provide a quote for the following: Background: All Items must be new. Porotypes, demonstration models, used, or refurbished equipment will not be considered for award. All items requested will accept an OR EQUAL item. Price Schedule: All offerors shall provide a quotation for the following line items: Line Item 1: 3032 StingRay Parts Washer Retractable Turntable Aircraft Wheel Parts Washer Item Details: USA Specifications: SR 3032 Parts Washer Metric Specifications: SR 3032 Parts Washer Standard Features & General Construction Green Technology: Closed Loop Zero Discharge & High Efficiency Stainless Steel Cabinet & Wetted Standard Components Heavy gage 3/16" Sheet Cabinet Thickness Pump with Stainless Steel Shafts, Fasteners and Viton Seals Auto Fresh Water Rinse Cycle Auto Steam Exhaust System Auto Programmable Oil Skimmer System Engineered Wheel Wash Power Blast Manifold Oscillating Wash Manifold to Maximize Cleaning 1 Station Aircraft Wheel Fixture fits most wheel sizes Removable Internal Reservoir Cover allows Full Access to machine reservoir Swing Door Retracting Turntable for Maximum Access Electronic Water Level Control & Refill Easy to Service Front Wash Pump Suction Strainer Adjustable Electronic Digital Temp Control, 2 line display present value & set-point Control Transformer External of Panel minimizes Heat Programmable 24 Hour 7 Day Clock Low Water Shut-off Protects Pumps & Heating System Electronic Door Safety Interlock Wash Cycle Timer with Auto Reset 230 V or 460 V - 60 Hz 3-Phase with 120 V Controls Standard 208 VAC or 575 VAC optional International 50 Hz upgrades for 380, 400, 415 VAC Chemical Resistant Two Part 3 mil Epoxy Coating Provisions and Clauses: The following provisions and clauses apply to this acquisition and are hereby incorporated by reference. All FAR clauses may be viewed at http://acquisition.gov/comp/far/index.html or http://farsite.hill.af.mil Provisions 52.204-7 System for Award Management 52.212-1 Instructions to Offerors- Commercial Items 52.212-3 Offerors Representations and Certifications-Commercial Items 52.225-18 Place of Manufacture 52.225-25 Prohibition on Contracting with Entities Engaging in Certain Activities or Transactions Relating to Iran-Representation and Certifications Clauses The following FAR clauses apply to this acquisition and will be incorporated into the resultant contract. FAR 52.252-2 Clauses Incorporated by Reference (Feb 1998), This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es): http://acquisition.gov/comp/far/index.html or http://farsite.hill.af.mil 52.204-10 Reporting Executive Compensation 52.204-13 System for Award Management 52.204-19 Incorporation by Reference of Representations and Certificates 52.209-6 Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment (Oct 2015) 52.212-4 Contract Terms and Conditions- Commercial Items 52.222-50 Combatting Trafficking in Persons (FEB 2009) (22 U.S.C.7104(g)) 52.222-3 Convict Labor (June2003) (E.O. 11755) 52.222-19 Child Labor- Cooperation with Authorities and Remedies (JAN 2014) (E.O. 13126) 52.222-21 Prohibition of Segregated Facilities (Feb 1999) 52.222-26 Equal Opportunity (MAR 2007) (E.O. 11246) 52.222-36 Equal Opportunity for Workers with Disabilities (Jul 2014) (29 U.S.C. 793) 52.223-18 Encouraging Contractor Policies to Ban Text Messaging while Driving (Aug 2011) (E.O. 13513) 52.225-1 Buy American Supplies 52.225-3 Buy American Free Trade Agreements Israeli Trade Act Certificate Alternate I 52.225-13 Restrictions on Certain Foreign Purchases (June 2008) (E.O. proclamations, and statues administered by the Office of Foreign Assets Control of the Department if the Treasury) 52.232-33 Payment by Electronic Funds Transfer- System for Award Management (Jul 2013) ( 931 U.S.C. 3332) 52.216-24 Limitation of Government Liability 52.216-25 Contract Definitization 52.225-25 Prohibition on Contracting with Entities Engaging in Certain Activities or Transactions Relating to Iran- Representations and Certifications 52.232-39 Unenforceability of Unauthorized Obligations 52.232-40 Providing Accelerated Payments to Small Business Contractors 52.233-3 Protests After Award (AUG 1996) ( 31 U.S.C. 3553) 52.233-4 Applicable Law for Breach of Contract Claim (Oct 2004) 52.244-6 Subcontracts for Commercial Items 52.247-34 FOB Destination 252.203-7000 Requirements Relating to Compensation of Former DoD Officials 252.203-7002 Requirement to Inform Employees of Whistleblower Rights (Sep 2013) 252.211-7003 Item Unique Identification and Valuation 252.232-7003 Electronic Submission of Payment Requests and Receiving Reports. (Jun 2012) 252.232-7006 Wide Area WorkFlow Payment Instructions 252.204-7012 Safeguarding of Unclassified Controlled Technical Information (Nov 2013) 252.225-7048 Export-Controlled Items (Jun 2013) Clauses incorporated by Full Text FAR 52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS--COMMERCIAL ITEMS (OCT 2010) (DEVIATION) (a) Comptroller General Examination of Record. The Contractor shall comply with the provisions of this paragraph (a) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, and does not contain the clause at 52.215-2, Audit and Records -- Negotiation. (1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor's directly pertinent records involving transactions related to this contract. (2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR Subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved. (3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law. (b) (1) Notwithstanding the requirements of any other clause in this contract, the Contractor is not required to flow down any FAR clause, other than those in this paragraph (b)(i) in a subcontract for commercial items. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause- (i) 52.203-13, Contractor Code of Business Ethics and Conduct (Apr 2010) (Pub. L. 110- 252, Title VI, Chapter 1 (41 U.S.C. 251 note)). (ii) 52.219-8, Utilization of Small Business Concerns (May 2004) (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds $550,000 ($1,000,000 for construction of any public facility), the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities. (iii) Reserved. (iv) 52.222-26, Equal Opportunity (Mar 2007) (E.O. 11246). (v) 52.222-35, Equal Opportunity for Veterans (Sep 2010) (38 U.S.C. 4212). (vi) 52.222-36, Affirmative Action for Workers with Disabilities (Oct 2010) (29 U.S.C. 793). (vii) Reserved (viii) 52.222-41, Service Contract Act of 1965, (Nov 2007), (41 U.S.C. 351, et seq.) (ix) 52.222-50, Combating Trafficking in Persons (Feb 2009) (22 U.S.C. 7104(g)). ___ Alternate I (Aug 2007) of 52.222-50 (22 U.S.C. 7104(g)). (x) 52.222-51, Exemption from Application of the Service Contract Act to Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Requirements (Nov 2007) (41 U.S.C. 351, et seq.). (xi) 52.222-53, Exemption from Application of the Service Contract Act to Contracts for Certain Services--Requirements (Feb 2009) (41 U.S.C. 351, et seq.) (xii) 52.222-54, Employment Eligibility Verification (Jan 2009). (xiii) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations. (Mar 2009) (Pub. L. 110-247). Flow down required in accordance with paragraph (e) of FAR clause 52.226-6. (xiv) 52.247-64, Preference for Privately-Owned U.S.- Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx 1241(b) and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247-64. (2) While not required, the contractor may include in its subcontracts for commercial items a minimal number of additional clauses necessary to satisfy its contractual obligations. (End of Clause) 252.212-7001 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS APPLICABLE TO DEFENSE ACQUISITIONS OF COMMERCIAL ITEMS (DEC 2010) (b) The Contractor agrees to comply with any clause that is checked on the following list of Defense FAR Supplement clauses which, if checked, is included in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items or components. (1) _X_ 252.203-7000, Requirements Relating to Compensation of Former DoD Officials (JAN 2009) (Section 847 of Pub. L. 110-181). (14)(i) _X___ 252.225-7036, Buy American Act--Free Trade Agreements--Balance of Payments Program (JUL 2009) (41 U.S.C. 10a-10d and 19 U.S.C. 3301 note). (25)(i)_X_ 252.247-7023, Transportation of Supplies by Sea (MAY 2002) (10 U.S.C. 2631). (26) _X_ 252.247-7024, Notification of Transportation of Supplies by Sea (MAR 2000) (10 U.S.C. 2631). (c) In addition to the clauses listed in paragraph (e) of the Contract Terms and Conditions Required to Implement Statutes or Executive Orders--Commercial Items clause of this contract (FAR 52.212-5), the Contractor shall include the terms of the following clauses, if applicable, in subcontracts for commercial items or commercial components, awarded at any tier under this contract: (4) 252.247-7023, Transportation of Supplies by Sea (MAY 2002) (10 U.S.C. 2631). (5) 252.247-7024, Notification of Transportation of Supplies by Sea (MAR 2000) (10 U.S.C. 2631). (End of clause) For offers to be considered at a minimum all RFQs must include the following: Completed Representations /Certifications (SAM), Completed Pricing Schedule, Completed Acknowledgement of Terms and Conditions. Offerors shall submit quotations to 123rd Contracting Office, no later than Tuesday, August 22, 2017 at 4:00PM EST.FAX quotations shall not be accepted. E-mail quotations shall be accepted at contact@example.gov. Please reference the RFQ number in the subject line of email communications. Offerors' quotations shall not be deemed received by the Government until the quotation is entered in the e-mail box set forth above. Please make all quotes valid through September 30th 2017. Also, include DUNS, Cage code, Tax ID, Shipping & Lead Time for items. The point of contact for this solicitation is Anthony Hayden +1 (555) 000-0000 if any additional information is required. Evaluation Award shall be made to the vendor based on lowest priced, technically acceptable. Technically acceptability means that the quote meets all of the stated minimum specifications. The Government shall evaluate price for reasonableness.

More opportunities from Department Of Defense → W7NA Uspfo Activity Kyang 123

Same awarding agency

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS