Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

This Sources Sought opportunity from Department Of Homeland Security was posted on September 15, 2017. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

87' WPB EVAC OY Water Closet Overhaul

Closed
HSCG40-18-S-19001Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811310
New
Kubota M8200 Clutch Replacement
Solicitation # kubota-m8200-clutch-replacement
Management & Training Corporation is soliciting bids for the clutch replacement of a Kubota M8200 tractor with front wheel assist, no cab or loader, located at the Earle C. Clements Job Corps Center in Morganfield, Kentucky. The scope of work requires the contractor to provide all transportation, labor, supervision, tools, and new manufacturer-specified parts to diagnose and repair the clutch assembly and power take-off system. Key technical requirements include disassembling tractor components, replacing friction discs, bearings, oil seals, and O-rings, resurfacing the flywheel, and replacing hydraulic pipes and filters as necessary. The contractor must verify proper clutch engagement and disengagement and test the PTO system under load to ensure the unit is restored to safe operating condition. This is a small business set-aside solicitation with a response deadline of November 3, 2026. Award will be based on best value, and bidders must submit a bid sheet, a completed supplier packet including a W-9 and self-certification form, and proof of insurance. The contract is subject to various federal regulations, including Service Contract Labor Standards under Wage Determination 2015-4687 Revision 31 for Kentucky, and FAR clauses regarding the utilization of small business concerns and combating trafficking in persons. Final acceptance of the work is contingent upon inspection by the Facility Maintenance Department to verify operational functionality and adherence to manufacturer specifications.
Earle C. Clements Job Corps Center

POSTED

about 4 hours ago

DEADLINE

in 3 days
NAICS: 811310
New
SLED
Asphalt Storage Tank Maintenance and Repair
Solicitation # 601320000072188
The Texas Department of Transportation (TxDOT) issued Invitation for Bid (IFB) 601320000072188 in October 2026 for the maintenance and repair of two Duraco Model 8250 asphalt storage tanks located at the Gonzales Maintenance Facility in District 13. The scope of work includes the cleaning of tanks, installation of new manway gaskets and other necessary seals, and the off-site transport and disposal of all removed materials in compliance with Texas Health and Safety Code Chapter 361. All work must be performed according to manufacturer recommendations and applicable standards, with a final inspection required by a TxDOT representative prior to invoicing. Responses are due by November 6, 2026, at 3:00 p.m. Central Time and must be submitted via the Euna Procurement portal. Bidders are required to provide a comprehensive submission including a price schedule in Excel format, qualifications and references, an approach to work, and mandatory certifications regarding child support obligations and legal eligibility. TxDOT will award the contract based on best value, primarily considering purchase price, compliance with specifications, and the risk of vendor non-performance. To pass the initial evaluation, vendors must maintain a performance rating of A, B, or C in the CPA Vendor Performance Tracking System. The selected vendor must adhere to strict insurance requirements, including policies from companies with an A.M. Best rating of A- or better, and maintain confidentiality regarding all TxDOT business information. Payments will be processed electronically in accordance with Texas Government Code Chapter 2251. Additionally, respondents must certify compliance with various state and federal laws, including the Texas Free Enterprise and Antitrust Act and Title VI assurances, while agreeing to prioritize the purchase of Texas-produced materials when available.
Texas Department of Transportation

POSTED

about 20 hours ago

DEADLINE

in 6 days
NAICS: 811310
New
SLED
Conveyance Maintenance Services
Solicitation # 26-1336
Chicago Public Schools is soliciting bids for Conveyance Maintenance Services under solicitation number 26-1336 to implement a comprehensive preventive maintenance program for conveyance equipment. The selected bidder will provide all labor, materials, and supervision necessary to ensure equipment remains safe and operational, adhering to the City of Chicago Municipal Code, ASME A17.1/CSA B44, ASME A17.3, and original equipment manufacturer standards. The contract includes a three-year initial term with the possibility of two automatic renewals of two years each. Services involve monthly preventive maintenance during normal working hours from 6:00 a.m. to 2:30 p.m., as well as 24/7 emergency callback support. Key deliverables include site-specific maintenance schedules, the use of CPS facilities software for reporting, and an annual Executive Summary Report based on a 7-point assessment rubric. The agreement will be awarded to the lowest, responsive, and responsible bidder based on evaluation factors including price, business stability, professional qualifications, past performance, and capacity. Bidders must submit a comprehensive package via Bonfire, including an Excel-based bid tabulation, audited financial statements for the last three fiscal years, three non-Board references, and a W-9 tax form. Compliance with MBE/WBE aspirational goals of 30% and 7% respectively is required, along with adherence to the Illinois Minimum Wage Law and various federal and state non-discrimination acts. Invoicing must be submitted electronically in PDF format, with payments processed according to the Local Government Prompt Payment Act. All shipments are designated as F.O.B. destination. The deadline for questions is November 6, 2026, and the final response deadline is November 20, 2026.
Chicago Public Schools

POSTED

about 21 hours ago

DEADLINE

in 20 days
NAICS: 811310
New
SLED
Annual Inspection/Maint. and Repair on Generator at FMS #8
Solicitation # SRC0000037488
Solicitation SRC0000037488 is for the annual inspection, maintenance, and repair of a Speed Air air compressor (Model 1WD44, SN: D063475) at FMS #8 in Gadsden, Alabama. The scope of work includes replacing belts, collecting oil samples, and installing filters, cabinet filter mats, and repair kits for the oil and thermostatic valves. A mandatory site visit is required on November 18, 2026, at 10:00 AM at 5319 Airport Road, Gadsden, Alabama. The response deadline is November 23, 2026, and all bids must be submitted electronically through the Alabama Buys portal. The contract is managed by the Army MCA and the State of Alabama, with a maximum total value of 25,000 dollars over a potential five-year period, subject to annual renewals. Award evaluation will be based on price reasonableness, cost realism, and supplier qualifications, including professional licenses and insurance. Vendors must comply with the Code of Alabama, including the Beason-Hammon Alabama Taxpayer and Citizen Protection Act and registration requirements for foreign corporations. Payment will be handled electronically via P-cards, EFT, or state-issued credit cards. Final acceptance of services is contingent upon a satisfactory inspection by the State of Alabama in accordance with the Universal Commerce Code.
Army MCA_App 01_Real Property Operations & Maintenance, State Military Department

POSTED

about 22 hours ago

DEADLINE

in 23 days
NAICS: 811310
New
SLED
Electrical & Automation Services
Solicitation # 9181
The City of Denton is soliciting proposals for Electrical and Automation Services to support 12 Wartsila 18V50SG units located at the Denton Energy Center. The selected contractor must ensure all equipment operates within Original Equipment Manufacturer specifications without voiding existing warranties. Key performance requirements include providing personnel and service offers within one week of notice and completing repairs and services within five weeks of evaluation. The City will award the contract based on best value, evaluating submissions through a weighted scoring system: 30% for schedule timeliness, 30% for compliance with specifications, 20% for indicators of probable performance, and 20% for total cost of ownership. Submissions must be made via IONWAVE or hard copy by December 2, 2026, at 2:00 PM CT. Hard copy responses must be sealed, limited to 200 pages, and bound only with staples or binder clips. Required documentation includes proof of Texas state registration, a conflict of interest questionnaire, and a safety record. The contractor must comply with Davis-Bacon prevailing wage rates, the Buy American Act, and ADA non-discrimination practices. Invoicing must be submitted to the City's Accounts Payable department within 30 calendar days of service completion, with payments processed within 30 days of receipt. All deliverables must be shipped with weather-resistant labeling and a packing slip to the designated Denton address.
City Of Denton

POSTED

1 day ago

DEADLINE

in about 1 month
NAICS: 811310
New
SLED
Chiller Maintenance Services
Solicitation # 26FS0006
Solicitation 26FS0006 is an Invitation for Bid issued by the California Department of Veterans Affairs (CalVet) for comprehensive maintenance and emergency repair services for chillers, Liebert units, and cooling towers at the Veterans Home of California-Fresno. The contract period is scheduled from January 1, 2027, through June 30, 2030. The scope of work includes annual and quarterly preventive maintenance, one-time evaporator tube cleaning and eddy current testing, and emergency repair services with a required two-hour response time. Key deliverables include annual leak detection reports per AQMD requirements and yearly oil sample lab analysis reports. The contract will be awarded to the lowest responsible bidder who complies with all requirements. Evaluation factors include price, responsibility, and responsiveness, with specific incentives and preferences applied for Disabled Veteran Business Enterprises (DVBE) and certified Small or Micro businesses. To be eligible, contractors must maintain an active C-20 license and technicians must hold EPA Section 608 Universal Technician Certification. Bidders are required to submit a mandatory Rate Sheet, signed Contractor Certification Clauses, and a Bidder Certification via email to Eric Dahmen by the November 4, 2026, deadline. Awarded contractors must adhere to prevailing wage laws under Labor Code Section 1770 and comply with all site security and health requirements at the Fresno facility.
California Department of Veterans Affairs

POSTED

1 day ago

DEADLINE

in 3 days

General Info

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

Place of Performance

MD

Set-Aside

NONE

Documents

2
DOCX
DOC

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed
Posted

Sources Sought

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Homeland Security → Sflc Procurement Branch 3(00040)
Contacts1 person available
OfficeBALTIMORE, MD, 21226, USA
Office AddressBALTIMORE, MD, 21226, USA

Full Description

Show more
This is a SOURCES SOUGHT NOTICE, pursuant to FAR Part 10 (Market Research) and HSAM 3006.302-1. This is not a pre-solicitation notice or solicitation for proposals/quotations. For information regarding this acquisition, contact the Contracting official listed herein. ALL INQUIRES SHALL BE IN WRITING. REQUIREMENT: The U.S. Coast Guard (USCG), Surface Forces Logistics Center has a requirement for the overhaul of EVAC Oy, Water Closets (Compact Base Unit, NSN: 4510-01-574-8421, p/n: 5470513) using Original Equipment Manufacturer (OEM) parts. These Water Closets are part of the sanitation system installed onboard the 87' WPB Coast Guard Cutters. Overhauls shall be accomplished in accordance with Statement of Work (SOW) entitled, "Overhaul of U.S. Coast Guard 87' WPB Water Closets." A Draft copy of this SOW is attached with this announcement as Attachment I. The following is a list of all mandatory replacement parts to be utilized on every overhaul. Table 1 - Mandatory Replacement Parts OEM PART # DESCRIPTION 5828090 Disc Valve 5473037 Regulator 5880059 Ejector Spares Kit 4000294 Sluice Filter 4000067 Check Valve 5774150 Water Filter 4000198 Servo Valve 5473028 Regulator Filter The following is a list of contingency replacement parts that may be required as part of the overhaul. Table - 2 Contingency Replacement Parts OEM PART # DESCRIPTION 5880061 Disc Valve Spares kit 5410541 Rubber Gasket 5472476 Solenoid Valve 5474074 Pressurizer 7322706 6/4 Plastic Pipe, per foot 7322708 8/6 Plastic Pipe, per foot 4000244 Hose Valve 4000250 Hose Valve, DN 15 5470474 Splash Guard 5406151 Ejector 5473323 Filter House 1100051 Electronic Box 5860365 Vacum Breaker 7327306 Pneumatic Cylinder 4000209 Pneumatic Valve 9836K21 Air Muffler 1100900 Cable Harness 5433215 Water Inlet Hose This requirement must be completed utilizing only genuine Evac Oy parts from the Original Equipment Manufacturer (OEM). Remanufactured or aftermarket parts are not acceptable. The Coast Guard does not own the rights to the technical data necessary to evaluate other parts. This sources sought notice is being issued to obtain information on vendors capable of providing the OEM parts and performing the overhauls. All costs including packaging, marking and bar-coding in accordance with Attachment II shall be incorporated in the cost of each part. Standard manufacturer warranty is required. The anticipated NAICS Code is 811310, Commercial and Industrial Machinery and Equipment (Except Automotive and Electronic) Repair and Maintenance, with a size standard of 7.5million. Period of Performance: It is anticipated that a requirements contract with one (1) Base Year and four (4) Option Years will be awarded for this requirement Submission of Information: If you intend to submit information / documentation on this acquisition, please respond by mail or email to the attention of Dana Solomon at U.S. Coast Guard, Surface Forces Logistics Center, Contracting & Procurement Div. 1 (PBPL), 2401 Hawkins Point Road - M/S 25, Baltimore, MD 21226, phone +1 (555) 000-0000, Email: contact@example.gov. E-mail submissions are preferred. It is the responsibility of the vendor to ensure delivery of their information. Please submit your information by 4:30 p.m. Eastern Standard Time (EST) on September 29, 2017. The following information/ documentation must be included in your response: (a) a positive statement of your intention to submit a bid for this solicitation as a prime contractor, to include DUNS number, business size and, if applicable, your small business status; (b) subcontracting possibilities for this requirement; (c) proof you can provide the brand name parts and perform overhauls in accordance with the OEM standards, processes, and data rights; and (d) evidence of experience in supplying and overhauling the required items to include contract numbers, project titles and dollar amounts, points of contact and telephone numbers. At least two references are requested. All of the above must be submitted in sufficient detail for a decision to be made for a small business set aside. A decision on whether this will be pursued as a small business set aside or on an unrestricted basis will be posted at www.fbo.gov. Disclaimer and Important Notes: The submission of this data for review shall not impede award of this contract as planned. The Government does NOT intend to pay for information solicited. For information regarding this acquisition, contact the Contracting officials listed herein. Regardless of the information obtained from this Sources Sought Notice, the Government reserves the right to consider any arrangement as deemed appropriate for this requirement. No proprietary, classified, confidential or sensitive information should be included in your response to this Sources Sought Notice. The Government reserves the right to use any information provided by respondents for any purpose deemed necessary and legally appropriate, including using technical information provided by respondents in any resultant solicitation. Responses to this Sources Sought Notice will not be considered adequate responses to any resultant solicitation.

More opportunities from Department Of Homeland Security → Sflc Procurement Branch 3(00040)

Same awarding agency

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS