This Combined Synopsis/Solicitation opportunity was posted on September 14, 2017. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

J--SERVICES: Annual Maintenance for Cleaver Brooks Boilers (Service Cleaning)

Awarded

VA24817Q1638Federal

Submission Closed09/26/2017, 05:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811310

New

Kubota M8200 Clutch Replacement

Solicitation # kubota-m8200-clutch-replacement

Management & Training Corporation is soliciting bids for the clutch replacement of a Kubota M8200 tractor with front wheel assist, no cab or loader, located at the Earle C. Clements Job Corps Center in Morganfield, Kentucky. The scope of work requires the contractor to provide all transportation, labor, supervision, tools, and new manufacturer-specified parts to diagnose and repair the clutch assembly and power take-off system. Key technical requirements include disassembling tractor components, replacing friction discs, bearings, oil seals, and O-rings, resurfacing the flywheel, and replacing hydraulic pipes and filters as necessary. The contractor must verify proper clutch engagement and disengagement and test the PTO system under load to ensure the unit is restored to safe operating condition. This is a small business set-aside solicitation with a response deadline of November 3, 2026. Award will be based on best value, and bidders must submit a bid sheet, a completed supplier packet including a W-9 and self-certification form, and proof of insurance. The contract is subject to various federal regulations, including Service Contract Labor Standards under Wage Determination 2015-4687 Revision 31 for Kentucky, and FAR clauses regarding the utilization of small business concerns and combating trafficking in persons. Final acceptance of the work is contingent upon inspection by the Facility Maintenance Department to verify operational functionality and adherence to manufacturer specifications.

Earle C. Clements Job Corps Center

POSTED

DEADLINE

Bus Fire Suppression System Maintenance

Solicitation # WMATA-0000010906

The Washington Metropolitan Area Transit Authority is seeking proposals for the maintenance of bus fire suppression systems under solicitation number WMATA-0000010906. This procurement falls under NAICS code 811310 and is managed through the agency's Virginia operations. The solicitation was posted on October 31, 2026, with a strict response deadline of November 4, 2026. Interested parties must submit their responses via the official supplier portal by the specified cutoff time to be considered for the contract.

Washington Metropolitan Area Transit Authority

POSTED

DEADLINE

Asphalt Storage Tank Maintenance and Repair

Solicitation # 601320000072188

The Texas Department of Transportation (TxDOT) issued Invitation for Bid (IFB) 601320000072188 in October 2026 for the maintenance and repair of two Duraco Model 8250 asphalt storage tanks located at the Gonzales Maintenance Facility in District 13. The scope of work includes the cleaning of tanks, installation of new manway gaskets and other necessary seals, and the off-site transport and disposal of all removed materials in compliance with Texas Health and Safety Code Chapter 361. All work must be performed according to manufacturer recommendations and applicable standards, with a final inspection required by a TxDOT representative prior to invoicing. Responses are due by November 6, 2026, at 3:00 p.m. Central Time and must be submitted via the Euna Procurement portal. Bidders are required to provide a comprehensive submission including a price schedule in Excel format, qualifications and references, an approach to work, and mandatory certifications regarding child support obligations and legal eligibility. TxDOT will award the contract based on best value, primarily considering purchase price, compliance with specifications, and the risk of vendor non-performance. To pass the initial evaluation, vendors must maintain a performance rating of A, B, or C in the CPA Vendor Performance Tracking System. The selected vendor must adhere to strict insurance requirements, including policies from companies with an A.M. Best rating of A- or better, and maintain confidentiality regarding all TxDOT business information. Payments will be processed electronically in accordance with Texas Government Code Chapter 2251. Additionally, respondents must certify compliance with various state and federal laws, including the Texas Free Enterprise and Antitrust Act and Title VI assurances, while agreeing to prioritize the purchase of Texas-produced materials when available.

Texas Department of Transportation

POSTED

DEADLINE

Process Field Instrumentation & GaugesThis subcontract for Process Field Instrumentation and Gauges involves the supply and installation of critical process instrumentation, gauges, and sensors for prime contractors working on Porter-Tower Joint Municipal Authority WWTP projects in Schuylkill County, Pennsylvania. The scope of work includes the installation of pitot tube flow sensors, flow gage assemblies, diaphragm seals on non-potable water gauges, and full body line size pressure sensors on sludge piping, with the ultimate goal of delivering a fully installed and calibrated instrumentation system. The opportunity is categorized under NAICS code 811310 and was posted on October 30, 2026. Interested parties must submit their responses by the deadline of December 16, 2026, at 5:00 PM.

POSTED

DEADLINE

Conveyance Maintenance Services

Solicitation # 26-1336

Chicago Public Schools is soliciting bids for Conveyance Maintenance Services under solicitation number 26-1336 to implement a comprehensive preventive maintenance program for conveyance equipment. The selected bidder will provide all labor, materials, and supervision necessary to ensure equipment remains safe and operational, adhering to the City of Chicago Municipal Code, ASME A17.1/CSA B44, ASME A17.3, and original equipment manufacturer standards. The contract includes a three-year initial term with the possibility of two automatic renewals of two years each. Services involve monthly preventive maintenance during normal working hours from 6:00 a.m. to 2:30 p.m., as well as 24/7 emergency callback support. Key deliverables include site-specific maintenance schedules, the use of CPS facilities software for reporting, and an annual Executive Summary Report based on a 7-point assessment rubric. The agreement will be awarded to the lowest, responsive, and responsible bidder based on evaluation factors including price, business stability, professional qualifications, past performance, and capacity. Bidders must submit a comprehensive package via Bonfire, including an Excel-based bid tabulation, audited financial statements for the last three fiscal years, three non-Board references, and a W-9 tax form. Compliance with MBE/WBE aspirational goals of 30% and 7% respectively is required, along with adherence to the Illinois Minimum Wage Law and various federal and state non-discrimination acts. Invoicing must be submitted electronically in PDF format, with payments processed according to the Local Government Prompt Payment Act. All shipments are designated as F.O.B. destination. The deadline for questions is November 6, 2026, and the final response deadline is November 20, 2026.

Chicago Public Schools

POSTED

DEADLINE

Annual Inspection/Maint. and Repair on Generator at FMS #8

Solicitation # SRC0000037488

Solicitation SRC0000037488 is for the annual inspection, maintenance, and repair of a Speed Air air compressor (Model 1WD44, SN: D063475) at FMS #8 in Gadsden, Alabama. The scope of work includes replacing belts, collecting oil samples, and installing filters, cabinet filter mats, and repair kits for the oil and thermostatic valves. A mandatory site visit is required on November 18, 2026, at 10:00 AM at 5319 Airport Road, Gadsden, Alabama. The response deadline is November 23, 2026, and all bids must be submitted electronically through the Alabama Buys portal. The contract is managed by the Army MCA and the State of Alabama, with a maximum total value of 25,000 dollars over a potential five-year period, subject to annual renewals. Award evaluation will be based on price reasonableness, cost realism, and supplier qualifications, including professional licenses and insurance. Vendors must comply with the Code of Alabama, including the Beason-Hammon Alabama Taxpayer and Citizen Protection Act and registration requirements for foreign corporations. Payment will be handled electronically via P-cards, EFT, or state-issued credit cards. Final acceptance of services is contingent upon a satisfactory inspection by the State of Alabama in accordance with the Universal Commerce Code.

Army MCA_App 01_Real Property Operations & Maintenance, State Military Department

POSTED

DEADLINE

MIL-STD-1330D Oxygen Cleaning ServicesThis subcontract for the Defense Logistics Agency involves providing specialized cleaning and drying services for oxygen system components. The primary objective is to support prime contractors by ensuring all components are free of hydrocarbons and contaminants to prevent combustion in high-pressure environments. All work must be executed within certified oxygen-cleaning facilities using approved solvents in strict accordance with MIL-STD-1330D standards. The project falls under NAICS code 811310 and requires the delivery of certified Oxygen Clean components. Interested parties should note the response deadline of November 7, 2026, for this Department of Defense requirement.

Defense Logistics Agency

POSTED

DEADLINE

Electrical & Automation Services

Solicitation # 9181

The City of Denton is soliciting proposals for Electrical and Automation Services to support 12 Wartsila 18V50SG units located at the Denton Energy Center. The selected contractor must ensure all equipment operates within Original Equipment Manufacturer specifications without voiding existing warranties. Key performance requirements include providing personnel and service offers within one week of notice and completing repairs and services within five weeks of evaluation. The City will award the contract based on best value, evaluating submissions through a weighted scoring system: 30% for schedule timeliness, 30% for compliance with specifications, 20% for indicators of probable performance, and 20% for total cost of ownership. Submissions must be made via IONWAVE or hard copy by December 2, 2026, at 2:00 PM CT. Hard copy responses must be sealed, limited to 200 pages, and bound only with staples or binder clips. Required documentation includes proof of Texas state registration, a conflict of interest questionnaire, and a safety record. The contractor must comply with Davis-Bacon prevailing wage rates, the Buy American Act, and ADA non-discrimination practices. Invoicing must be submitted to the City's Accounts Payable department within 30 calendar days of service completion, with payments processed within 30 days of receipt. All deliverables must be shipped with weather-resistant labeling and a packing slip to the designated Denton address.

POSTED

DEADLINE

Boiler and Refractory Repair Services

Solicitation # TAMU-RFP-27-5144

Texas A&M University Procurement Services has issued solicitation TAMU-RFP-27-5144 for Boiler and Refractory Repair Services to be performed in Texas. This SLED organization is seeking qualified vendors to provide specialized repair services, with the official solicitation posted on October 30, 2026. The deadline for responses is November 18, 2026, by 8:00 PM UTC, though the procurement guidelines specify that submissions must be received by 2:00 PM CST on the closing date to be considered. Interested bidders must register and submit their proposals electronically through the AggieBid portal at aggiebidprod.tamu.edu, as no further documentation will be posted to the Electronic State Business Daily. All proposal information should be factual, clear, and concise. For further inquiries, the primary point of contact is Jim Nelms.

POSTED

DEADLINE

Boiler Combustion Analysis and Control TuningThis subcontract for Boiler Combustion Analysis and Control Tuning involves providing specialized calibration and tuning services for boiler combustion systems on Texas A&M University projects. The selected contractor will work under prime contractors to adjust air-to-fuel ratios, calibrate control sensors, and ensure strict adherence to EPA emissions standards using flue gas meters and combustion analyzers. The final deliverables for this engagement include a comprehensive combustion analysis report and a fully tuned control system. To qualify for this role, contractors must hold manufacturer-specific control system certifications. The opportunity was posted on October 30, 2026, with a response deadline of November 18, 2026. This project falls under NAICS code 811310 and is managed through the Texas A&M University procurement system.

POSTED

DEADLINE

Boiler & Refractory Repairs Services

Solicitation # TAMU-RFP-27-5144

Texas A&M University is soliciting proposals under RFP TAMU-RFP-27-5144 to establish a Master Order for Boiler and Refractory Services to be performed at its campus in College Station, Texas. The solicitation period opens on October 30, 2026, and closes on November 18, 2026, at 2:00 PM CST. All responses must be submitted electronically through the AggieBid portal, and vendors are required to adhere to the terms and conditions specified within that system and the university's official purchasing guidelines. While the primary solicitation establishes the intent to secure these services, detailed technical specifications, deliverables, and performance outputs are contained within attachments available exclusively through the AggieBid portal. Interested parties may direct inquiries to the buyer at [email hidden] or contact Jim Nelms. No specific contract value, period of performance, or evaluation criteria were provided in the initial solicitation documents.

POSTED

DEADLINE

Chiller Maintenance Services

Solicitation # 26FS0006

Solicitation 26FS0006 is an Invitation for Bid issued by the California Department of Veterans Affairs (CalVet) for comprehensive maintenance and emergency repair services for chillers, Liebert units, and cooling towers at the Veterans Home of California-Fresno. The contract period is scheduled from January 1, 2027, through June 30, 2030. The scope of work includes annual and quarterly preventive maintenance, one-time evaporator tube cleaning and eddy current testing, and emergency repair services with a required two-hour response time. Key deliverables include annual leak detection reports per AQMD requirements and yearly oil sample lab analysis reports. The contract will be awarded to the lowest responsible bidder who complies with all requirements. Evaluation factors include price, responsibility, and responsiveness, with specific incentives and preferences applied for Disabled Veteran Business Enterprises (DVBE) and certified Small or Micro businesses. To be eligible, contractors must maintain an active C-20 license and technicians must hold EPA Section 608 Universal Technician Certification. Bidders are required to submit a mandatory Rate Sheet, signed Contractor Certification Clauses, and a Bidder Certification via email to Eric Dahmen by the November 4, 2026, deadline. Awarded contractors must adhere to prevailing wage laws under Labor Code Section 1770 and comply with all site security and health requirements at the Fresno facility.

California Department of Veterans Affairs

POSTED

1 day ago

DEADLINE

in 3 days

AI Contract Overview

Network Contracting Activity 8 Service Area Office - East is seeking a Firm Fixed Price service contract for the annual maintenance and service cleaning of Cleaver Brooks 500HP Boilers at the C.W. Bill Young VAMC. This procurement is conducted under FAR Subpart 13 simplified acquisition procedures, with a base period of performance from October 1, 2017, to September 30, 2018, and includes four one-year option periods. The solicitation is categorized under NAICS code 811310, which has a small business size standard of 7.5 million dollars. Interested offerors must be fully registered in the System for Award Management to be eligible for award. The submission window for this solicitation opens on September 14, 2017, and closes on September 26, 2017, at 4:00 pm EST.

General Info

Agency

N/A

Contract Value

$45,855

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

Place of Performance

C.W. Bill Young VAMC;10000 Bay Pines Blvd;Bay Pines, FL 33744 33744 USA, FL, USA

Set-Aside

NONE

Awardee

THERMAL TECH INC

Award Issued Date

10/01/2017, 12:00:00 AM UTC

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseAwarded

PostedSep 14

Combined Synopsis

AwardedOct 1

Contract was awarded

Submission Closed

09/26/2017, 05:00:00 AM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyN/A

ContactsNo contacts available

OfficeN/A

Organization / Agency

N/A

Office AddressN/A

ContactsNo contact information available

Full Description

Network Contracting Activity 8 Service Area Office - East intends to award a Firm Fixed Price service contract for Annual Maintenance for Cleaver Brooks Boilers (Service Cleaning) for the C.W. Bill Young VAMC. This procurement is being conducted under FAR Subpart 13 and simplified acquisition procedures apply. Period of performance is 1 October 2017 30 September 2018. The is a base year with four (4) one year options requirement. The North American Industrial Classification System (NAICS) code for this procurement is 811310 with a small business size standard of $7.5 million. This solicitation starts 09/14/2017 and will end 09/26/2017 at 16:00 pm EST. Special Note: This solicitation is for the CLEANING of Cleaver Brooks 500HP Boilers ONLY!! Prospective offerors shall be a registered in the System for Award Management (SAM) at http://www.sam.gov to be considered for an award of a federal contract, and registration shall be complete and not missing elements such as representations and certifications.