This Combined Synopsis/Solicitation opportunity from Department Of Defense was posted on September 8, 2014. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Aircrew Safety Gear

Closed

W91ZRU-14-T-0049Federal

Submission Closed09/19/2014, 10:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 315210

New

Federal

CTX Employee Uniform Purchase

Solicitation # 36C25727Q0012

The Department of Veterans Affairs, Network Contracting Office 17, is soliciting quotes for a firm-fixed price contract to purchase bulk employee work uniforms for Environmental Management Services at the Doris Miller VA Medical Center in Waco, Texas. This procurement is a total set-aside for certified Service-Disabled Veteran-Owned Small Businesses (SDVOSB). The scope of work includes providing uniforms with custom embroidery and personalization, with the requirement that the vendor provide image mock-ups and potential samples. The contract structure consists of a base year and four option years, with an ordering period spanning from November 1, 2026, through October 31, 2031. Orders will be issued on an as-needed basis with a minimum order value of 500 dollars and a maximum order limit of 300,000 dollars. Award will be determined using the Lowest Priced Technically Acceptable (LPTA) evaluation method. Submissions will first undergo a completeness review, followed by price ranking, and finally a technical capability assessment on a pass/fail basis. To be considered, offerors must submit a signed SF 1449, a detailed Price/Cost Schedule, a Capability Statement, three past performance references, and a signed VAAR certificate of compliance regarding subcontracting limitations. All deliverables are FOB Destination to the Waco, Texas location and must be labeled with the awarded contract and purchase order numbers. The final deadline for proposal submission is November 13, 2026, at 13:00 CST.

257-NETWORK Contract Office 17 (36C257)

POSTED

DEADLINE

SOLICITATION - U.S. Army West Point India White Coats, Trousers, Dresses

Solicitation # W911SD-26-Q-A114

The Mission and Installation Contracting Command West Point is soliciting quotes for a multi-year, firm-fixed-price contract to manufacture India White coats, trousers, and skirts for male and female cadets at the United States Military Academy. This procurement is a 100 percent set-aside for total small business concerns under NAICS code 315210. The contract features an ordering period from November 1, 2026, through October 31, 2033, with an initial delivery estimated for May 2027. A unique material sourcing arrangement is in place where the government provides all fabric and associated materials as government furnished items during the base year, while the contractor becomes solely responsible for sourcing all materials during the option years. The award will be based on the lowest price source selection, provided the offeror passes a technical evaluation of required samples for each garment type. All quotes must be submitted electronically via email to the designated point of contact by November 16, 2026, at 2:00 PM EST, which is also the strict deadline for the receipt of physical samples. Technical requirements are governed by specific product descriptions and military standards, including mandatory first article testing for the base year's first delivery order. Invoicing and payment will be processed electronically through the Wide Area WorkFlow system.

POSTED

DEADLINE

MAS Shield Kit SupplierThis subcontract through C AND T SUPPLY CHAIN for the Department of Defense requires the procurement or manufacture of four MAS Shield Kits under NSN 8415-01-594-0416. The supplier is responsible for ensuring all kits meet strict NSN specifications and adhere to the Berry Amendment and the Buy American/Balance of Payments Program. Additionally, the contractor must provide Material Safety Data Sheets for any hazardous materials included in the kits. Logistical requirements mandate strict adherence to MIL-STD-129, MIL-STD-147, and MIL-STD-2073-1E standards for packaging and marking. The performance of this contract is centered in Jacksonville, and the response deadline for the solicitation is November 5, 2026.

POSTED

DEADLINE

Solicitation # SPE1C1-27-T-0051

Solicitation SPE1C1-27-T-0051 is a procurement request by the Defense Logistics Agency for four units of the MAS SHIELD KIT, SPEC, identified by NSN 8415-01-594-0416. The contract specifies a delivery timeframe of 20 days after order, with an original required delivery date of October 27, 2026. Delivery is set as FOB Destination, with shipping directed to the Marine Aviation Logistics SQ 26, 2nd Marine Aircraft Wing FMF in Jacksonville, North Carolina. Inspection and acceptance are both designated to occur at the origin per FAR 52.246-2. The contractor must adhere to strict packaging and marking standards, including MIL-STD-147, MIL-STD-129, and MIL-STD-2073-1E, as well as DLA packaging requirements for procurement. Key regulatory compliance includes the Buy American and Balance of Payments Program (DFARS 252.225-7001), the Berry Amendment, and cybersecurity requirements under DFARS 252.204-7012 for safeguarding covered defense information. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system. This is not a small business set-aside, and it falls under NAICS code 315210.

POSTED

DEADLINE

Solicitation # SPE1C1-27-T-0049

Solicitation SPE1C1-27-T-0049 is a Request for Quotations issued by the DLA Troop Support C and T Supply Chain for the procurement of six large flight deck crewman helmets, identified by NSN 8415017073208 and part number 72-R3-PB-1S from Team Wendy LLC. The requirement specifies a delivery timeframe of 20 days after order, with the items being shipped to the USS Jason Dunham DDG 109. Inspection and acceptance are both set at the destination. The contract mandates strict adherence to DLA packaging and marking standards, including MIL-STD-2073-1E, MIL-STD-129, and MIL-STD-147, with specific requirements for intermediate container E5 and the use of UPC 718020959788. Compliance with the Berry Amendment, the Buy American Act, and CMMC Level 2 Self-Assessment is required. Administrative tasks, including payment requests and receiving reports, must be processed electronically through the Wide Area WorkFlow system. Quotations were due by November 5, 2026.

POSTED

DEADLINE

Solicitation # 2026-Informal-0447

The City of Pasadena Public Health Department is soliciting bids under solicitation number 2026-Informal-0447 for the purchase of customized uniforms for emergency response personnel. The scope of work includes the procurement of waterproof insulated jackets with hoods, zip-up hoodies, and both long-sleeve and short-sleeve t-shirts. Specific technical requirements for the jackets include a 5000MM waterproof rating, 3000G/M^2 breathability, and 100% polyester construction with 2-4 ounce polyfill, referencing the Sport-Tek JST56 style or an approved equal. The contract period runs from December 1, 2026, through June 30, 2027, with a requirement that all orders be completed within 30 days of placement and shipments made within 15 calendar days of ordering. Bids must be submitted electronically via the City's eProcurement Portal by 4:00 pm on November 2, 2026, and will be evaluated based on the lowest Grand Total Price. Required submission documents include a Unique Entity Identifier from SAM.gov, a Vendor Questionnaire, a Relevant Experience Form, and various federal certifications regarding lobbying and FEMA terms and conditions. Deliveries are to be made to the Public Health Emergency Preparedness office in Pasadena during specified business hours. Payment is processed on Net 30 terms through the Vendor Invoice Portal, with checks issued on Tuesdays and Thursdays. The City reserves the right to reject any products that fail to meet strict quality standards or approved samples.

Public Health Department

POSTED

DEADLINE

Mechanix MG55 Glove Manufacturing and SupplyThis subcontract involves the manufacturing and supply of Mechanix MG55 specification gloves for prime contractors supporting Department of Defense projects under the DLA Troop Support C and T Supply Chain. The scope includes sourcing or producing gloves in sizes small through XXL that correspond to specific National Stock Numbers, including 8415-01-677-9240, 9241, 9246, 9248, and 8415-01-667-9250. Performance is centered at Fort Bragg, with all deliverables required to meet strict packaging standards per MIL-STD-129 and MIL-STD-147E. Compliance is a critical component of the agreement, requiring adherence to the Berry Amendment for domestic sourcing and DFARS 252.204-7012 cybersecurity standards. The contract falls under NAICS code 315210 and was posted on October 21, 2026, with a response deadline of November 2, 2026.

POSTED

DEADLINE

GLOVES, MEN'S AND WOMEN

Solicitation # SPE1C1-27-T-0045

Solicitation SPE1C1-27-T-0045, issued by the DLA Troop Support C and T Supply Chain, is for the procurement of men's and women's gloves. The items must be manufactured in accordance with the Mechanix (CAGE 07LZ4) MG55 spec sheet and are available in sizes small, medium, large, x-large, and xx-large. A specific requirement for 25 pairs of medium gloves (NSN 8415-01-677-9241) is noted with a delivery timeline of 20 days after receipt of order. Delivery and inspection are set for destination at Fort Bragg, North Carolina. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific packaging standards such as MIL-STD-129, ASTM-D-3951, and MIL-STD-147E. All invoicing and payment requests must be processed through the Wide Area WorkFlow system. Compliance with the Berry Amendment, Buy American Act, and various cybersecurity regulations, including DFARS 252.204-7012, is required. The procurement falls under NAICS code 315210, and quotes should be submitted via the DIBBS portal.

POSTED

DEADLINE

GLOVES, MEN'S AND WOMEN

Solicitation # SPE1C1-27-T-0047

Solicitation SPE1C1-27-T-0047, issued by the DLA Troop Support C and T Supply Chain, is for the procurement of men's and women's gloves. The items must be manufactured in accordance with the Mechanix (CAGE 07LZ4) MG55 specification sheet. The primary deliverable is identified under NSN 8415-01-677-9240, with a specific requirement for 25 pairs. Delivery is required within 20 days after receipt of order, with a target delivery date of October 23, 2026, to Fort Bragg, North Carolina. The contract is not a small business set-aside and falls under NAICS code 315210. The contract mandates strict adherence to packaging and marking standards, including MIL-STD-129, MIL-STD-147, and ASTM D3951, requiring the use of snug-fitting fiberboard shipping containers with a minimum burst strength of 275 psi. Inspection and acceptance will occur at the destination. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. Additionally, the award is subject to the Buy American Act, the Berry Amendment, and DFARS cybersecurity requirements for safeguarding covered defense information. Offerors are encouraged to submit quantity ranges via DIBBS and must disclose any use of non-domestic materials.

POSTED

DEADLINE

Supply of MAS SHIELD KIT, SPEC (NSN 8415015940415)This subcontract through C AND T SUPPLY CHAIN for the Department of Defense involves the procurement and delivery of one MAS SHIELD KIT, identified by NSN 8415015940415. The selected contractor is responsible for sourcing the kit according to Gentex Corporation specifications and ensuring all quality assurance measures align with DLA Master List requirements. All items must be packaged and marked in strict accordance with MIL-STD-147, MIL-STD-129, and MIL-STD-2073-1E standards. Compliance with the Berry Amendment and the Buy American Act is mandatory for all materials used. The contract falls under NAICS code 315210, with the place of performance located at FPO 96672. Interested parties must submit their responses by the deadline of November 2, 2026.

POSTED

DEADLINE

Solicitation # SPE1C1-27-T-0036

Solicitation SPE1C1-27-T-0036 is a request for quotations for one MAS Shield Kit, specifically Gentex Corporation part number 05D12001-2 (NSN 8415015940416). The requirement is issued by the Department of Defense C and T Supply Chain and is not a small business set-aside, falling under NAICS code 315210. The item is to be delivered FOB Destination to the USS Makin Island LHD 8, with a required delivery timeline of 20 days after award and an original required delivery date of October 22, 2026. Inspection and acceptance will take place at the point of origin. The contractor must adhere to strict packaging and marking standards, including MIL-STD-147, MIL-STD-129, and MIL-STD-2073-1E, as well as DLA packaging requirements under RP001. Compliance with the Buy American Act and the Berry Amendment is required for quotes exceeding the micro-purchase threshold. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for invoicing and the DLA Account Management and Provisioning System (AMPS) for shipment modules. Key regulatory clauses include FAR 52.246-2 for inspection and DFARS 252.204-7012 for safeguarding covered defense information. All quotes must be submitted via the DLA Internet Bid Board System (DIBBS).

POSTED

DEADLINE

Solicitation # SPE1C1-27-T-0035

Solicitation SPE1C1-27-T-0035 is a fixed-price procurement issued by the Department of Defense through the DLA for one MAS SHIELD KIT, SPEC, identified by NSN 8415015940415. The requirement is not a small business set-aside and falls under NAICS code 315210. The item is specified as being produced by Gentex Corporation (CAGE 97427) with a required delivery date of October 22, 2026, and a delivery timeline of 20 days after receipt of order. Shipping is FOB Destination to the USS MAKIN ISLAND LHD 8 at FPO AP 96672. Both inspection and acceptance are to take place at the point of origin. The contract mandates strict adherence to technical and quality requirements found in the DLA Master List, including packaging and marking standards MIL-STD-147, MIL-STD-129, and MIL-STD-2073-1E, as well as DLA packaging requirement RP001. Compliance with the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 for safeguarding covered defense information is required. Invoicing must be processed electronically via the Wide Area WorkFlow system. This procurement may be eligible for automated award, provided there are no first article test requirements.

C AND T SUPPLY CHAIN

POSTED

10 days ago

DEADLINE

in 3 days

General Info

Agency

Department Of Defense → W7MU Uspfo Activity Akang 176

NAICS

315210 - Cut and Sew Apparel Contractors

Place of Performance

17470 Airlifter Drive, JBER, AK, 99506, USA

Set-Aside

SBA

Documents

Aircrew_Safety_Sizes.xlsx

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed

PostedSep 8

Combined Synopsis

Response DeadlineSep 19

Deadline has passed

Submission Closed

09/19/2014, 10:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → W7MU Uspfo Activity Akang 176

Contacts2 people available

OfficeJBER, AK, 99506-2959, USA

Organization / AgencyDepartment Of Defense → W7MU Uspfo Activity Akang 176

Office AddressJBER, AK, 99506-2959, USA

Contacts

MSG Contracting

contact@example.gov

+1 (555) 000-0000

Nicole RahmerContracting Specialist

contact@example.gov

+1 (555) 000-0000

Full Description

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format prescribed in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. All items below are brand name or equal. If quoting "or equal" items, please include all physical, functional and performance capabilities. This requirement is a 100% small business set-aside, NAICS 315210 The Government has the right to award all, some, or none of the line items listed below. Please provide a reasonable delivery date in your quote. See attachment for sizing 0001 - 50 each: Coveralls, Flyers; NSN 8415-01-043-8384, Color - Sage Green 0002 - 30 each: Boot FG INS NO COMP; Danner 26063; Color - Sage Green 0003 - 100 eacj: Gloves, Flyers; NSN 8415-01-029-0112; color - Sage Green 0004 - 1 each: Shipping to JBER, AK 99506 Please include shipping directly to Anchorage AK 99506. Firms that believe that they can provide similar required items must provide supporting evidence to the Contracting Officer. This announcement constitutes the only written notice. Basis for award will be the best value to the Government. In accordance with FAR 52.212-2, the Government will award a contract/purchase order resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following evaluation factors shall be used to evaluate offers: Technical (item specifications) and Price. The following provisions are incorporated by reference: FAR 52.204-7 Central Contractor Registration, FAR 52.212-1 Instructions to Offerors-Commercial Items, FAR 52.212-3 Alt I Offeror Representations and Certificates-Commercial Items, FAR 52.212-4 Contract Terms and Conditions-Commercial Items, and FAR 52.212-5, Contract Terms and Conditions-Commercial Required to Implement Statutes of Executive Orders-Commercial Items. To be eligible for contract award, all contractors must be registered with the System for Award management (SAM) found at https://www.sam.gov/portal/public/SAM/. Payments for the resulting contract will be made through Wide Area Work Flow (WAWF). Contractors can register for WAWF at https://wawf.eb.mil/.