Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

This Government Contract opportunity from Department Of Defense was posted on July 12, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Aircrew Training Services Delivery

Closed
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 611512
New
Federal
*UPDATED* USAF TPS Qualitative Evaluation Flight Training Multiple Award BPA 3 for T-2 Buckeye, A-4 Skyhawk, Daher Kodiak, Cirrus Vision Jet, Noorduyn Norseman, Systems Platform Aircraft, Lighter-Than-Air, and Jet Glider Services
Solicitation # A068521
This Request for Quote (RFQ) seeks to establish multiple Blanket Purchase Agreements (BPAs) to provide Qualitative Evaluation (QE) flight training for the USAF Test Pilot School at Edwards AFB, California. The acquisition is a 100% Total Small Business Set-Aside under NAICS code 611512, with a size standard of 34 million dollars. The requirement is divided into eight separate solicitations covering specific aircraft types: T-2 Buckeye, A-4 Skyhawk, Daher Kodiak, Cirrus Vision Jet, Noorduyn Norseman, Systems Platform Aircraft, Lighter-Than-Air (airship or balloon), and Jet Glider services. Each BPA is estimated not to exceed 349,999.99 dollars for its total ordering period, which varies between three and five years depending on the aircraft type, with an option to extend services by six months. The government will evaluate quotes based on a Best Value Continuum, prioritizing technical acceptability over price. Technical evaluation focuses on the offeror's ability to provide the requested services within the required timeframe. Contractors must provide all necessary management, qualified instructor pilots, equipment, and facilities. Performance will be monitored via a Quality Assurance Surveillance Plan (QASP) and spot-check evaluations by the Contracting Officer Representative. All aircraft must pass an Air Force Test Center approved Subject Matter Expert inspection. Quotes are due by September 17, 2026, at 3:30 PM PDT and must be submitted via email with required contractor information, including SAM UEI, CAGE code, and a technical approach.
FA9304 Aftc Pzz

POSTED

about 21 hours ago

DEADLINE

in 6 days
NAICS: 611512
New
Federal
Specialized Flight Test and Evaluation Training Services
Solicitation # FA300226R0089
The Department of War, acting for the 338th Enterprise Sourcing Squadron and the US Air Force Security Assistance Training squadron, is conducting market research via Sources Sought Notice FA3002-26-R-0089 to identify qualified large and small businesses capable of providing specialized flight test and evaluation training services. The government is seeking industry capabilities to deliver comprehensive flight test curricula, including long-course professional test pilot programs compliant with EASA Cat 1/Cat 2 and NATO STANAG 4578, as well as specialized training in performance, flying qualities, systems testing, and unmanned systems. Additionally, the requirement covers modular short courses such as spin training, UPRT, and NVG/HMD, alongside high-level institutional accreditations including WSCUC collegiate accreditation, ABET-accredited Master of Science integration, EASA Approved Training Organization status, and FAA Part 141 Air Agency certification. This effort is categorized under NAICS 611512 and PSC U006, with the place of performance located within the continental United States, specifically noting Mojave, California. Interested parties must submit a capability statement not exceeding 10 pages by October 8, 2026, at 12:00 p.m. CDT. All inquiries must be submitted by September 23, 2026. This notice is intended for planning and market research purposes only and does not constitute a formal request for proposal or a guarantee that a solicitation will be issued.
FA3002 338 Ess Cc

POSTED

4 days ago

DEADLINE

in 26 days

AI Contract Overview

Show more

The contract seeks subcontracted services to deliver comprehensive military aircrew training encompassing classroom instruction, simulator-based exercises, flight evaluations, and curriculum development for initial, recurrent, and mission-specific training programs. Training must be designed to meet evolving operational standards and is intended to support readiness across all phases of aircrew development, from foundational skills to advanced mission proficiency. The work is performance-based and requires adherence to rigorous military training protocols, with deliverables aligned to readiness objectives for aviation units. The contract is issued under NAICS code 611512 for other schools and instruction and is part of the Department of Defense’s Maritime Supply Chain initiative, with performance centered at Cherry Point, North Carolina, 28533-5040. The solicitation was posted on July 12, 2026, with responses due by July 23, 2026, and is designated as a subcontract opportunity under a larger government procurement framework. While no set-aside status or point of contact is specified, potential bidders must be prepared to demonstrate expertise in military aviation training systems, facility capability for simulator operations, and proven experience in curriculum design tailored to defense training requirements.

General Info

Subcontract for military aircrew training at Cherry Point using simulators, classroom instruction, and curriculum development.

Agency

Department Of Defense → MARITIME SUPPLY CHAINView Agency

NAICS

611512 - Flight TrainingView NAICS

Place of Performance

CHERRY POINT, NC, 28533-5040, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7M1-26-T-206U.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

MOTOR, TORQUE

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Defense → MARITIME SUPPLY CHAIN
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Deliver military aircrew training including classroom instruction, simulator-based training, flight evaluations, and curriculum development for initial, recurrent, and mission-specific training.

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN

Same awarding agency

NAICS: 334417
New
DIBBS
CONNECTOR, PLUG, ELECTRI
Solicitation # SPE7M1-26-U-5585
Solicitation SPE7M1-26-U-5585, issued by DLA Land and Maritime, is for the procurement of electrical plug connectors under NSN 5935011078814. The requirement is for an estimated quantity of 147 units, with a contract maximum value of 350,000.00 dollars. This is an Indefinite Delivery Contract for a one year period, utilizing a simplified acquisition process. Delivery is required within 94 days after receipt of order, with shipping terms based on FOB Origin under the First Destination Transportation program. Inspection and acceptance will occur at the destination. The items are classified as critical application items and must comply with basic specification MS27467M(1) and reference specification MIL-DTL-38999N(1). This is a qualified item subject to the Qualified Products List for Federal Stock Class 5935. Specific quality restrictions prohibit the use of materials manufactured by Bendix Corporation (CAGE 77820) with lot date codes from January 1977 through February 1984. Additionally, the use of Class I ozone-depleting substances is prohibited without written approval. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129. Removable crimp type contacts must not be installed in the connector insert but must be placed in a close fitting noncorrosive rigid container within the unit container, labeled with current and superseded part numbers per SAE-AS39029. Hazardous materials must be labeled according to the Hazard Communication Standard. Payment and invoicing will be processed electronically through the Wide Area Workflow system.
Electronic Connector Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 4 days
View Details
NAICS: 333998
New
DIBBS
PARTS KIT, FLUID PRESSU
Solicitation # SPE7M1-26-U-5566
Solicitation SPE7M1-26-U-5566 is a total small business set-aside for an indefinite delivery contract with a one year period, issued by the Defense Logistics Agency for the procurement of fluid pressure filter parts kits. The requirement specifies General Motors LLC 7X677 part number 24210956, with an estimated annual quantity of 3,515 units and a guaranteed contract minimum of 527 units. The contract has a maximum value of 350,000 dollars and requires a delivery period of 81 days. The government reserves the right to make multiple awards, with the best value offeror receiving at least 60 percent of the total requirement. Technical compliance requires adherence to DLA master lists and specific packaging standards, including MIL-STD-2073-1 Appendix D for kits and MIL-STD-129 for marking. Inspection and acceptance will occur at the destination, utilizing sampling methods such as MIL-STD-1916 or ASQ H1331. Offerors must submit quotes via DIBBS and are prohibited from using additive manufacturing processes unless authorized. The contract incorporates various FAR and DFARS clauses, including requirements for combating trafficking in persons, safeguarding covered defense information, and compliance with the Buy American Act. Payment and invoicing must be processed through the Wide Area WorkFlow system.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 4 days
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 650+ contractors already using CLEATUS