This Solicitation opportunity from Department Of Defense was posted on May 13, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

AIRWAY, ORAL

Awarded

SPE2DS-26-T-072RFederal

Submission Closed05/19/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 334511

New

Federal

Request for Information (RFI) – Modular Tactical Signals Intelligence (SIGINT) EW System

Solicitation # FA8629-27-R-5005

The United States Air Force Life Cycle Management Center, specifically the Special Warfare Program Office, is conducting market research through a Sources Sought Synopsis and Request for Information under solicitation FA8629-27-R-5005. The government is seeking to identify capable sources for a body-worn, modular tactical Signals Intelligence and Electronic Warfare system characterized by low size, weight, and power. The system must support full spectrum signals prosecution in adverse environments, including the ability to detect, identify, and direction-find threat signals while stationary or on the move. Key technical requirements include interoperability with Android S20TE and S23TE devices, connectivity via mesh networks, and electronic warfare attack capabilities with tunable output power. Objective goals include Mil-STD-810G compliance, operation between -30C and +55C, and support for advanced jamming techniques such as predictive and reactive hop-set jamming. This RFI is for informational purposes only and does not constitute a formal solicitation or a commitment to procure items. Interested respondents must submit a maximum 15-page response by 12:00 PM Eastern time on November 18, 2026. Submissions must include company identification, socioeconomic status, technical capabilities, and a rough order of magnitude cost estimate. The government also requires information regarding the ability to deliver two units within six months of an order and confirmation of compliance with the Buy American Act or Berry Amendment. Additionally, respondents must address compliance with FAR 52.219-14 regarding limitations on subcontracting and FAR 52.219-33 regarding the Non-Manufacturer Rule if the requirement is set aside for small businesses.

FA8629 Aflcmc Wisk Sof/pr

POSTED

DEADLINE

Solicitation # N0010426QNF10

Solicitation N0010426QNF10, issued by the Department of the Navy's NAVSUP Weapon Systems Support Mech, is a total small business set-aside request for quotations for the manufacture of Rotor Torpedoes (NSN 1355-01-561-1348). The scope includes the production of hardware according to Technical Data Package version 009 and specific quality requirements. The government has included an option to increase the order quantity by up to 100 percent. Delivery is required within 405 days on a FOB Destination basis. Award will be granted to the responsible offeror providing the lowest priced technically acceptable offer, with evaluations incorporating the Supplier Performance Risk System to assess item, price, and supplier risk. The contract mandates strict adherence to several military standards, including MIL-STD-129 for marking, MIL-STD-973 for configuration management, and MIL-STD-2073-1 for preservation and packaging. A critical requirement is that all materials must be mercury-free to prevent corrosion and toxicity on submarines and surface ships. Quality systems must comply with ISO 9001, and each unit must be serialized through the Commander Naval Undersea Warfare Center. Administrative requirements include the use of Wide Area Workflow for invoicing and payment, and compliance with DFARS cybersecurity and Buy American regulations.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Solicitation # N0038327QAA08

Solicitation NO0383-27-Q-AA08, issued by NAVSUP Weapon Systems Support Philadelphia, is a small business set-aside for the teardown, evaluation, repair, overhaul, and modification of Fuel Management Computers (NSN 6610-01-523-8319, P/N 512010-03-01). The primary objective is to return these units to a Ready for Issue (RFI) condition. A critical technical requirement includes the mandatory replacement of all seven transorbs on the internal Fuel Interface Card (PN512023-04-01) as part of standard repair procedures. The contractor is responsible for providing all necessary facilities, labor, materials, and tooling, as the government will not provide manufacturing aids. Specific prohibitions include the use of MIL-W-81381 wire, which must be replaced by SAE-AS22759 series wire. The contract mandates strict adherence to quality and technical standards, including ISO 9001/SAE AS9100 for quality management and ANSI/NCSL Z540.3 or ISO-10012-1 for calibration. Performance is subject to government inspection and acceptance at the origin, with a required delivery timeframe of 90 days FOB Destination. The award will be made to a single responsible offeror based on a determination of the most advantageous offer, with past performance weighted as more important than price. Additional administrative requirements include the use of the Wide Area Workflow (WAWF) system for invoicing and compliance with MIL-STD-2073-1 for packaging and MIL-STD-129 for marking.

Navsup Weapon Systems Support

POSTED

DEADLINE

Binocular Night Vision Device

Solicitation # 202603695

The Royal Canadian Mounted Police is establishing a National Individual Standing Offer for the supply and delivery of Binocular Night Vision Goggle systems and adjustable iris units to enhance member safety. The requirement includes Generation 2+ and Generation 3 White Phosphorous goggles, as well as adjustable iris units, with initial quantities of 25, 75, and 200 units respectively. The standing offer is valid for two years from the date of issuance, with the possibility of two additional one-year extensions. All goods must be delivered Duty Paid to the RCMP National Warehouse in Ottawa, Ontario, within 60 calendar days of receiving a call-up. Selection is based on the lowest compliant bid following a three-phase evaluation process involving visual, operational, and measurement assessments of samples. Technical requirements include compliance with MIL-STD-810H for drop tests, IEC 60825-1 for laser safety, and specific marking requirements such as permanently affixed metal nameplates with laser-engraved serial numbers and ITAR designations. The contract mandates the use of reusable, returnable, or recyclable packaging in accordance with the Policy on Green Procurement. Suppliers must also provide certifications regarding the absence of forced labour, independent offer determination to prevent collusion, and adherence to the procurement Code of Conduct.

Royal Canadian Mounted Police

POSTED

DEADLINE

Manufacturing of Optoelectronic Displays (NSN 5980-20-001-5173)This subcontract involves the manufacture of 18 optoelectronic displays under NSN 5980-20-001-5173 for the DLA Weapons Support Active Devices Division. The selected contractor is responsible for fabricating the units according to specific technical drawings, performing Product Verification Tests, and ensuring all construction is mercury-free. Final deliverables must include all relevant material certifications and process operation sheets. The project is categorized under NAICS code 334511 and will be performed in New Cumberland. Strict adherence to security and data protection standards is required, specifically compliance with DFARS 252.204-7012 and NIST SP 800-171. The response deadline for this opportunity is November 11, 2026.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Supply of Display Units (NSN 7025-01-676-1273)This subcontract involves the manufacture or procurement of two specialized display units matching NSN 7025016761273 for prime contractors supporting the Department of Defense. The selected provider must ensure all units are packaged according to MIL-STD-2073-1E and RP001 standards, with markings applied per MIL-STD-129. Delivery must be executed via the fastest traceable shipping method to the designated place of performance in FPO 96616. To be eligible for this requirement, contractors must maintain a valid CAGE code and current SAM validation. The project falls under NAICS code 334511 and is managed through the Defense Logistics Agency. Interested parties must submit their responses by the deadline of November 9, 2026.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

DEADLINE

Supply of Fire Detector Sensing ElementsThis subcontract involves the procurement and delivery of four commercial off-the-shelf sensing elements for aviation fire detector systems. These components, specifically Meggitt Safety Systems Inc part number 3001-176-1050/500-18 with NSN 6340-01-322-8526, are intended for prime contractors supporting the Department of Defense through the DLA Weapons Support Aviation Supply Chain. All deliverables must strictly adhere to the DLA Master List technical and quality requirements, as well as physical identification requirement RQ017. The project falls under NAICS code 334511, with a response deadline set for November 4, 2026.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

POSTED

DEADLINE

Supply of Reconnaissance System Camera Control UnitsThis subcontract involves the procurement and delivery of two reconnaissance system camera control units, specifically HurleyIR part number RP-M1R3-PCM, for prime contractors working on DLA Troop Support projects. The items must be packaged according to ASTM D3951 and labeled in accordance with MIL-STD-129. Delivery is required FOB Origin to the DLA Distribution DDSP located in New Cumberland, Pennsylvania. To be eligible, the provider must maintain a CMMC Level 2 self-assessment and ensure full compliance with the Buy American Act. The opportunity falls under NAICS code 334511 and is managed under the Department of Defense. Interested parties must respond by November 9, 2026.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

DEADLINE

Radar Set Support Component Supply (P/N SRC3980A)This subcontract involves the manufacture or procurement of one radar set support component, part number SRC3980A, for prime contractors supporting the DLA Weapons Support ASC. The supplier must ensure the unit is produced in strict accordance with RA001 technical and quality requirements and maintains full compliance with the Buy American Act as specified in DFARS 252.225-7001. Managed by the Department of Defense under NAICS code 334511, the contract is overseen by the DLA Weapons Support ASC Supplier Oper AE and AF Div. Performance of the contract will take place in New Cumberland, Pennsylvania. The solicitation was posted on October 27, 2026, with a response deadline of November 4, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Solicitation # SPE4A6-27-T-7074

Solicitation SPE4A6-27-T-7074 is a request for quotations issued by the DLA Weapons Support ASC Commodities Division for the procurement of one Channel Filter, identified by NSN 5895-01-610-6177 and Northrop Grumman Systems Corporation part number 16-204164-5. The item is designated as a critical application item. Delivery is required by October 15, 2027, with a delivery window of 344 days after order. The contract is established as FOB Origin, with the destination for inspection and acceptance located at DLA Dist San Joaquin in Tracy, California. The contractor must adhere to strict quality and technical standards, including SAE AS9003 or ISO 9001 compliance for inspection systems and zero-based sampling plans per MIL-STD-1916 or ASQ H1331. Key requirements include CMMC Level 2 self-assessment, supply chain traceability documentation per DLA Directive C03, and packaging in accordance with MIL-STD-2073-1E and RP001. While item unique identification is not required, the contractor must comply with MIL-STD-129 for marking and provide hazard warning labels and Material Safety Data Sheets for any hazardous materials. Payment and invoicing must be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE7M1-27-T-0979

Solicitation SPE7M1-27-T-0979 is a Request for Quotations issued by the DLA Weapons Support Maritime Supply Chain for the procurement of Chem Cassettes, specifically NSN 6665015436452, part number 700347 from Honeywell Analytics Distribution. The requirement consists of two line items for one unit each, with a delivery timeframe of 20 days after order. The items are designated as critical application items and are subject to strict storage and handling requirements, including a non-extendable three-month shelf life and mandatory refrigeration. The contract mandates strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with specific requirements for hazardous materials shipping under IP025 and 29 CFR 1910. Delivery is FOB Origin with inspection and acceptance occurring at the destination in Eastover, South Carolina. Shipping must be conducted via the fastest traceable means, and the use of parcel post is explicitly prohibited. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various DFARS and FAR clauses regarding cybersecurity, domestic material sourcing, and the safeguarding of covered defense information.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

RETICLE ASSEMBLY, OPTIC

Solicitation # SPE4A7-27-T-1065

Solicitation SPE4A7-27-T-1065 is a request for quotations issued by the DLA Weapons Support ASC for the procurement of two reticle assemblies for optical instruments, identified by NSN 5855-01-699-1892. The requirement falls under NAICS code 334511. The original required delivery date is July 26, 2027, with a need ship date of April 6, 2027, and a delivery lead time of 167 days after order. Shipping is designated as FOB Origin, with both inspection and acceptance occurring at the destination, specifically DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to quality and packaging standards, including ASTM D3951 for packaging and MIL-STD-129 for marking and labeling, with DLA Master List requirements taking precedence. Quality assurance will be managed through sampling methods such as MIL-STD-1916 or ASQ H1331. All quotes must be submitted via the DLA Internet Bid Board System (DIBBS). The procurement incorporates various federal regulations, including the Buy American and Balance of Payments program, DFARS cybersecurity reporting, and the Hazard Communication Standard for any applicable hazardous materials. Payment and invoicing are to be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 21 hours ago

DEADLINE

in 2 days

AI Contract Overview

The contract solicitation SPE2DS-26-T-072R calls for the procurement of 4 packages of neonatal oral airways, each package containing 12 units, for delivery to Hill Air Force Base, Utah, with a strict 5-day delivery window after receipt of order. The product is designated by NSN 6515-01-597-6155 and is described as a Berman oral airway with slotted sides that allow passage of suction catheters without obstructing airflow, functioning as a bite block and tongue depressor to protect teeth, automatically curving to the pharyngeal contour with a smooth rounded tip to minimize trauma and a flat surface for patient comfort. All units must be packaged according to DLA Packaging Requirements for Procurement (RP001), with each individual unit sealed in a protective container and shipped in commercial exterior containers suitable for safe, cost-effective delivery by common carrier. For medical acquisitions, packaging and marking must strictly follow Medical Marking Standard No. 1 (MMS NO. 1), which supersedes MIL-STD-129, and copies of this standard are available through DLA Troop Support. The contract requires compliance with the DLA Master List of Technical and Quality Requirements, which governs all technical specifications, and mandates that all hazardous materials be labeled in accordance with applicable safety standards. Inspection and acceptance occur at the destination under FAR 52.246-2, and the contractor is responsible for full compliance with packaging, marking, and delivery timelines. The contract incorporates numerous FAR and DFARS clauses addressing equal opportunity, trafficking in persons, employment verification, cybersecurity safeguards, hazardous materials handling, export controls, and electronic invoicing through WAWF. Offerors must provide their Unique Entity Identifier and CAGE code, and any representation as a small business or socioeconomically disadvantaged entity triggers additional disclosures. No pricing details are specified in the solicitation, and award will be based on compliance with technical, packaging, and delivery requirements. All proposals must be submitted electronically via the DLA Internet Bid Board System by the deadline of May 19, 2026.

General Info

Procurement of 48 neonatal Berman oral airways, compliant packaging, delivered to Hill Air Force Base.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Contract Value

$167.68

NAICS

334511 - Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

Place of Performance

DEAR JOHN BAY 385 519 8744, HILL AFB, UT, 84056-5734, USA

Set-Aside

NONE

Awardee

SZY HOLDINGS, LLC

Award Issued Date

05/21/2026, 12:00:00 AM UTC

Documents

RFQ SPE2DS-26-T-072R Medical Supply Chain

rfq

High

AI Contract Breakdown

Uniform Contract Format

Timeline

3 updates

PhaseAwarded

PostedMay 13

Solicitation

Notice updatedMay 13

The notice description changed.

Notice updatedMay 13

The notice description changed.

Notice updatedMay 13

The notice description changed.

AwardedMay 21

Contract was awarded

Submission Closed

05/19/2026, 05:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Contacts1 person available

OfficeUSA

Organization / AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Office AddressUSA

Contacts

CHANDLER ALVAREZ

contact@example.gov

+1 (555) 000-0000

Full Description

AIRWAY,ORAL
AIRWAY<(>,<)> ORAL
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO contact@example.gov. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
1 PG = 12 EA
BERMAN ORAL AIRWAY<(>,<)> SLOTTED SIDES PERMIT PASSAGE OF SUCTION
CATHETERS WITHOUT OBSTRUCTING THE AIR PASSAGE. TRIPLE PURPOSE AIRWAY
SERVES AS A BITE BLOCK AND TONGUE DEPRESSOR TO AVOID CRIMPING AND
PROTECT TEETH. AUTOMATICALLY CURVES TO THE CONTOUR OF PHARNYX. SMOOTH
ROUNDED TIP REDUCES TRAUMA TO UPPER AIRWAY. FLAT SURFACE HELPS ENSURE
PATIENT COMFORT. SIZE: NEONATAL.
SPE2DS-26-T-072R
SECTION B
UNIT OF ISSUE PACKAGE(PG) OF 12
BIDDER SHALL SPECIFY CAGE AND PART NUMBER OFFERED
ADEQUATE DATA FOR THE NSN/Part Number: 6515-01-597-6155 Quantity: 4 PG Purchase Request: 7016763713QTY: 4 Delivery: 5 days ADO