Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Alternate Parts Data Package Development

Active

Federal

Response Deadline08/13/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the development and submission of a technical data package for an alternate resistor component, with a focus on demonstrating full equivalency to the original part while ensuring compliance with all applicable military standards. This includes detailed engineering analysis, performance testing data, material specifications, and a formal justification that proves the alternate part meets or exceeds the operational, environmental, and reliability requirements of the original component. The deliverables must be thoroughly documented and structured to support review and approval by defense procurement authorities. The work is categorized as a subcontract under NAICS code 541715, with performance located at Hill Air Force Base, Utah, and must be completed by the response deadline of August 13, 2026. The requirement is issued by the Active Devices Division of the Department of Defense and is intended for use in military systems where part obsolescence or supply chain constraints necessitate approved Alternates. The submitter must ensure the data package is comprehensive, traceable, and fully aligned with DoD technical documentation norms, as failure to meet compliance criteria could result in rejection and delays in program sustainment.

General Info

Develop and submit compliant alternate resistor data package meeting military standards by August 13, 2026, at Hill AFB.

Agency

Department Of Defense → ACTIVE DEVICES DIVISIONView Agency

NAICS

541715 - Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)View NAICS

Place of Performance

HILL AFB, UT, 84056-5734, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 2

subcontract

Response DeadlineAug 13

Submission deadline

Response Deadline

08/13/2026, 05:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ACTIVE DEVICES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ACTIVE DEVICES DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Prepare and submit a technical data package for an alternate resistor part, including equivalency justification and compliance with military standards.

Similar Contracts

Same NAICS industry code

ManTech special Broad Agency Announcement (sBAA): Accelerating Maritime Modernization: Innovation in Naval Manufacturing, Sustainment, and Industrial Base Capability

Solicitation # N0001426SB002

The Navy Manufacturing Technology Program is seeking innovative research and development proposals through solicitation N0001426SB002 to enhance shipbuilding and maintenance capabilities by improving speed, throughput, and industrial base resilience. The focus is on transforming shipyards, maintenance depots, and supply chain operations through breakthrough manufacturing technologies that enable faster construction, arming, and repair of naval vessels. Proposals must clearly demonstrate how they remove existing bottlenecks and strengthen the nation’s shipbuilding enterprise by increasing efficiency, adaptability, and competitiveness across the defense industrial base. This initiative is critical to sustaining and modernizing the U.S. naval industrial infrastructure to meet current and future operational demands. Proposals are due by September 16, 2026, and are open to organizations responding to the Small Business Administration Assistance program under NAICS code 541715. The solicitation is managed by the Office of Naval Research in Arlington, Virginia, with primary point of contact Stephanie L. Marsh and secondary contact Miranda Fleck for inquiries. Performance locations are not specified, allowing flexibility for applicants to propose solutions that can be implemented across various U.S. naval manufacturing and maintenance facilities. Interested parties must submit their responses via the SAM.gov portal before the deadline to be considered for funding and collaboration opportunities aimed at revolutionizing naval manufacturing.

Office Of Naval Research

POSTED

about 10 hours ago

DEADLINE

in about 1 month

Army Contracting Command – Red River Army Depot (ACC-RRAD) Organic Industrial Base (OIB) Modernization Commercial Solutions Opening (CSO)

Solicitation # W911RQ-26-S-C001

The U.S. Army, through the Army Contracting Command – Red River Army Depot, is pursuing the modernization of its Organic Industrial Base under Commercial Solutions Opening W911RQ-26-S-C001, a flexible procurement initiative authorized under DFARS Subpart 212.70 and administered under FAR Part 12 Commercial Item Procedures. This effort is aligned with the Army’s strategic focus on Convergent Manufacturing, integrating advanced technologies such as digital twin, automation, connected digital enterprise, and cybersecurity to enhance producibility, sustainment, and logistics capabilities. The solicitation invites innovative commercial solutions across multiple areas of interest including automated media blast systems, camera monitoring for vehicle test tracks, power pack interface and test sets, AS9100 certification support, track pin and bushing manufacturing, and fixture removal for Bradley Fighting Vehicle hulls. Each area of interest is evaluated independently with specific submission deadlines, and all responses must be submitted electronically via email in two separate volumes: a technical proposal excluding cost data and a price proposal with full cost breakdowns, including labor rates, material quotes, and overhead. Offers must be unclassified, submitted through SAM.gov-registered entities with a Unique Entity ID, and adhere to strict formatting rules including a maximum of five pages or fifteen slides for initial solution briefs. Evaluation of proposals prioritizes technical merit and feasibility, followed by industrial base impact, speed and scalability of implementation, price fairness and reasonableness, private investment leverage, and a credible transition plan to full production. The government will use a trade-off approach rather than lowest price technically acceptable, with no numerical weights assigned but clear emphasis on non-price factors. Awards are contingent upon funding availability, successful negotiation, and technical validation, and do not obligate the government to proceed with any contract until formal award. Performance is expected to occur at Red River Army Depot in Texarkana, Texas, with inspection and acceptance conducted by the government at that location per MIL-DTL-11891, MIL-STD-1907, ASTM, and other referenced standards covering material quality, inspection, and manufacturing processes. Contractors must register in Wide Area Work Flow for invoicing, and proposals must comply with secure-by-design principles and modular open systems architecture requirements. No contract clauses, special requirements, or detailed packaging and marking specifications are provided in the solicitation, leaving these to be defined during contract negotiation post-selection. All submissions must be received by 5:00 P.M. CDT on their respective

POSTED

about 10 hours ago

DEADLINE

in about 2 months

Closed-Circuit Wind Tunnel (24-inch test)

Solicitation # PANRSA-26-P-0000-037658

The U.S. Army Contracting Command-Redstone is conducting market research through a Request for Information to identify capable vendors for the procurement of a closed-circuit wind tunnel to be installed at the Army Primary Standards Laboratory in Redstone Arsenal, Alabama. This specialized facility is intended for use by USATA Engineers and Technicians to support high-precision calibration activities using a Laser Doppler Velocimetry system, which requires the generation of extremely low air velocities down to 0.15 meters per second with a turbulence intensity under 1 percent. The wind tunnel must feature a 24-inch by 24-inch test section with optical-quality glass sidewalls to accommodate a 532-nanometer, 500-milliwatt argon-ion laser, and include seven sealable instrument ports that accept probes ranging from 4.3 to 15.9 millimeters in diameter. A 3/8-inch Swagelok bulkhead fitting upstream of the test section is required for the introduction of Bis(2-ethylhexyl) subacute seed particles, and the test section must include grooves at approximately 90 percent of its length to allow installation of adjustable nozzle restriction plates. A 15-inch section of the test area located six inches upstream of these plates must be replaceable without compromising the integrity of the wind tunnel circuit. The system must have a centrifugal fan with vibration isolation, driven by a variable-frequency drive controlled exclusively through LabVIEW software with no wireless or internet connectivity, and must operate at a maximum speed of approximately 50 meters per second while maintaining the specified turbulence criteria. The entire system, including all associated components, must not exceed 32 feet in length, 8 feet in width, or 7.5 feet in height. Design proposals must include validated quantitative analysis, such as computational fluid dynamics simulations, to demonstrate that all performance requirements are met. The solicitation number is PANRSA-26-P-0000-037658, and responses are due by July 15, 2026, to be submitted via email to designated Army contracting personnel. This is strictly a market research effort under FAR 15.201(e) and does not constitute a solicitation for contract award; no contract value, delivery schedule, or payment information has been established at this stage. Respondents are required to provide their CAGE code, Unique Entity Identifier, business size classification according to NAICS code 54

POSTED

about 10 hours ago

DEADLINE

ACC-DTA Ground Maneuver Commercial Solutions Opening (CSO)

Solicitation # W912CH-26-S-0001

The ACC-DTA Ground Maneuver Commercial Solutions Opening (CSO), identified by solicitation number W912CH-26-S-0001, is a streamlined acquisition authority authorized under DFARS Subpart 212-70, designed to rapidly procures innovative commercial technologies to enhance ground vehicle systems and support Army modernization priorities. This CSO enables the Department of the Army to award fixed-price contracts, including fixed-price incentive fee arrangements, primarily under FAR Part 12 for commercial items or through alternative authorities such as 10 U.S.C. 4022 and 31 U.S.C. 6305 for cooperative agreements or transactional agreements. The initiative targets commercially available technologies—whether already on the market or emerging from commercial or strategic investment—that can be rapidly integrated into Army operations through concept demonstrations, pilot projects, agile development, or incremental enhancements. The solicitation remains open until January 9, 2029, with the government retaining the right to extend it and to add new Areas of Interest (AoIs) at any time throughout its duration, each potentially having its own submission deadline. Proposals must be submitted directly via email to designated points of contact and are evaluated in two phases: a solution brief phase and a presentation phase. Pass/fail gates require offerors to possess a valid Unique Entity ID (UEI), be registered in the System for Award Management (SAM), and enroll in the Wide Area Work Flow invoicing system; failure to meet any of these renders a proposal ineligible. Evaluation criteria focus on responsiveness to the AoI, technical merit, innovation, affordability, IP restrictions, and the reasonableness of proposed timing and cost estimates. All submissions must be unclassified and may not be marked confidential; any Controlled Unclassified Information (CUI) must be handled in compliance with 32 CFR Part 2002. Offerors must also comply with the Procurement Integrity Act, be free from suspension or debarment, and for certain AoIs like the TIGER Hackathon, must affirm adherence to the Trade Agreements Act and Buy American Act while explicitly denying reliance on adversarial foreign nations for critical components. Technical proposals must include detailed workflows, staffing plans, deliverables with timelines, and full technical disclosures, while price proposals must provide labor categories, hours, rates, and material costs sufficient for government analysis. Contract awards will be contingent on favorable evaluation and available funding, with no pre-determined contract ceiling specified.

POSTED

about 10 hours ago

DEADLINE

in over 2 years

Small Business Subcontracting Participation with Accelerated PaymentsSmall business subcontractors are invited to engage in the supply chain for critical chemical supply, packaging, and cybersecurity initiatives under a subcontracting opportunity issued by the Department of Defense through the Medical Supply Chain FSH office. The contract offers accelerated payment terms facilitated through the Wide Area WorkFlow system, ensuring faster cash flow for qualified small businesses that participate. Interested parties must respond by the deadline of August 10, 2026, with no formal solicitation number provided, but the opportunity is accessible via the DIBBS platform using the provided link. The opportunity does not specify a NAICS code or set-aside designation, and performance location details are not outlined, allowing flexibility for subcontractors to support operations as needed. Participation is open to small businesses seeking to integrate into defense-related supply chain efforts with streamlined financial processes.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Defense Component Alternate Parts Sourcing and DocumentationThe contract involves sourcing and documenting alternate parts for defense components, with a focus on reverse engineering, preparing technical data packages, and removing government identifiers from non-accepted supplies. Activities require technical expertise to recreate parts that meet military specifications without using original government-controlled markings or proprietary data, ensuring compliance with defense procurement standards. The work is scoped to support continuity of supply chains for critical defense systems by identifying and qualifying viable alternatives when original components are unavailable or obsolete. Performance is centered in Albany, Georgia, with a deadline for responses set for August 13, 2026, and the solicitation was posted on August 2, 2026. The contract is categorized as a subcontract under NAICS code 541715, which corresponds to research and development in physical, engineering, and life sciences. The contracting entity is the Active Devices Division within the Department of Defense, indicating this effort supports specific military equipment maintenance or modernization initiatives. Participation requires precise adherence to documentation standards and the ability to handle sensitive technical information with appropriate redaction protocols.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

On-Site Fire Alarm Technician/Programmer ServicesThe contract seeks certified technicians to provide on-site services for programming, troubleshooting, diagnostics, and repairs of fire alarm systems across facilities managed by the Florida agency. Technicians must be qualified to handle all aspects of fire alarm system maintenance and must be available to respond to issues at various locations within the state. Services are expected to ensure full compliance with fire safety standards and uninterrupted operation of critical alarm systems. The contract is structured as a subcontract and is set to be awarded following a response deadline of August 31, 2026, with the opportunity first posted on July 31, 2026. The work falls under NAICS code 541715, indicating classification as research and development in the physical, engineering, and life sciences, typically encompassing technical services requiring specialized expertise. Performance is required directly at Florida GOAA facilities, and while specific locations are not detailed, responders must be prepared to service systems statewide.

POSTED

DEADLINE

Locomotive Aftermarket Technology Research & AnalysisThe contract seeks research and analysis on aftermarket locomotive technologies, focusing on fuel additives and injector kits to evaluate their potential for improving operational efficiency in Class II and III railroads. This work will involve a thorough literature review and a gap analysis to identify existing solutions, technological limitations, and opportunities for advancement. The effort is intended to provide actionable insights that could guide future adoption or development of cost-effective enhancements suitable for smaller rail operators with limited capital resources. The contract is classified as a subcontract under NAICS code 541715, with the Federal Railroad Administration under the Department of Transportation serving as the contracting entity. The place of performance is designated as Washington D.C., with a response deadline of August 21, 2026, and the opportunity was posted on July 31, 2026. No set-aside provisions or specific eligibility criteria are indicated, and no point of contact is provided in the posting. Interested parties must submit proposals by the stated deadline to be considered for participation.

693JJ6 Federal Railroad Administration

POSTED

DEADLINE

Genomic Data Analysis and Workflow Integration SupportThe contract seeks technical consulting services to integrate the PromethION 2 sequencing system with existing bioinformatics pipelines used by the CCR, ensuring seamless data flow and compatibility. The scope includes validating the accuracy and reliability of data output from the PromethION 2 platform, refining analysis workflows to improve efficiency and throughput, and providing expert guidance to optimize the entire genomic data analysis process. This work is critical to maintaining high standards of data integrity and analytical performance within the organization’s genomic research infrastructure. The contract is classified as a subcontract under NAICS code 541715 for scientific and technical consulting services, and is managed by the Ibc Acq Svcs Directorate under the Department of the Treasury. Performance is expected to take place in Bethesda, Maryland, with a response deadline of August 15, 2026. The solicitation was posted on July 31, 2026, and the successful vendor will be required to demonstrate proven experience in third-generation sequencing platforms, bioinformatics pipeline development, and validation of high-throughput genomic data systems.

Ibc Acq Svcs Directorate (00004)

POSTED

DEADLINE

On-Site Installation & Technical Integration SupportThe contract requires on-site implementation of the VHFLI system at ARL’s facility in Adelphi, Maryland, encompassing full installation, precise calibration, and seamless integration with existing experimental platforms. Technical personnel must ensure compatibility and performance validation under operational conditions, with a strong emphasis on achieving system functionality aligned with experimental requirements. This effort includes comprehensive training for ARL staff on system operation, maintenance, and data interpretation, followed by rigorous verification to confirm successful integration and readiness for routine use. The work is classified as a subcontract under NAICS code 541715, with a submission deadline of August 14, 2026, and is administered by the Department of Defense through the W6QK Acc-Apg Adelphi office. All activities must occur at the designated performance location in Adelphi, and the contractor is expected to deliver not only hardware and software integration but also documented operational verification and trained personnel capable of sustaining the system independently post-handover.

W6QK Acc-Apg Adelphi

POSTED

DEADLINE

Optical Design and STOP AnalysisThe contract seeks specialized services for high-fidelity optical modeling, tolerance analysis, and Structural-Thermal-Optical Performance simulations tailored for cryogenic space instruments, requiring advanced computational techniques to ensure optical system integrity under extreme thermal and mechanical conditions. The work includes detailed STOP modeling to predict and mitigate performance degradation caused by thermal expansion, cryogenic cooling, and structural deformation, ensuring mission-critical optical alignment and imaging precision in deep space environments. The solicitation is issued as a subcontract under NASA’s Jet Propulsion Laboratory, with performance required in Pasadena, California, and a deadline for responses set for August 21, 2026. The North American Industry Classification System code 541715 identifies the scope within scientific and technical consulting services, indicating the need for proven expertise in space instrument design and validation. The contract is not subject to any set-aside provisions, and all proposers must demonstrate technical capability in cryogenic optical systems, validated simulation methodologies, and experience supporting NASA missions.

NASA Management Office -- Jpl

POSTED

DEADLINE

Multiphysics Simulation & Modeling for Thermal SystemsThe contract seeks the development of high-fidelity computational models capable of simulating the coupled thermal, fluid, and structural interactions that occur under extreme operational environments, particularly hypersonic flight and exposure to directed energy systems. The work demands advanced multiphysics simulation capabilities to accurately predict material response, heat transfer dynamics, and structural integrity under intense thermal and mechanical loads, requiring expertise in computational mechanics, numerical methods, and experimental validation. The goal is to enable predictive design and performance analysis for next-generation aerospace systems operating in previously uncharacterized conditions. This is a subcontract opportunity issued by the Defense Advanced Research Projects Agency under the Department of Defense, categorized under NAICS code 541715 for research and development in physical, engineering, and life sciences. The solicitation was posted on July 31, 2026, with a response deadline of September 30, 2026. While specific performance location and point of contact details are not provided, the work is tied to national defense objectives requiring highly specialized technical capability. The absence of set-aside designations indicates it is open to all qualified applicants, with the expectation that proposers possess proven experience in high-fidelity multiphysics modeling and demonstrated success in defense-relevant simulation projects.

Defense Advanced Research Projects Agcy

POSTED

DEADLINE

in about 2 months

More opportunities from Department Of Defense → ACTIVE DEVICES DIVISION

Same awarding agency

RELAY, SOLID STATE

Solicitation # SPE7M5-26-T-365H

The contract is for the procurement of 10 solid state relays with NSN 5945-01-603-8822 under solicitation SPE7M5-26-T-365H, with a required delivery date of July 30, 2026, and a 20-day delivery window FOB destination. The unit price is $10.00 per item with no variance allowed in quantity. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, wrapping, and unit container codes, and all marking must adhere to MIL-STD-129 with the special marking code ZZ. Each individual unit package must include lead-free or lead-containing component markings per IPC/JEDEC J-STD-609, paragraphs 5.3.1 and 5.3.2, with placement dictated by paragraph 6.2 of the standard. The delivery address is FPO AP 96663, with shipment governed by DLA procedures C19 and C20. Technical and quality requirements are referenced from the DLA Master List, and all packaging and labeling must satisfy DLA’s packaging requirements. The contracting activity is under the Department of Defense’s Active Devices Division, with Jeanette Heisey as the primary point of contact.

Relay and Industrial Control Manufacturing

POSTED

about 5 hours ago

DEADLINE

CONNECTOR, RECEPTACL

Solicitation # SPE7M5-26-T-365G

The contract pertains to the procurement of electrical connectors, specifically identified as RECEPTACLE types with part numbers 5M1776-2041P, 91-554022-41, and 91-554022-41P, all aligned with the NSN 5935011612967. Two units are required under Purchase Request 7017724623, with delivery mandated within 20 days FOB origin at an unchanged quantity—no variances allowed. The items are classified as critical application components for The Boeing Company and must comply with stringent technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements. Sampling procedures must follow MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance criteria unless otherwise stated, with attributes classified as critical, major, or minor assigned corresponding verification levels or AQLs. Preservation and packaging must adhere to MIL-DTL-55330 for connectors and MIL-STD-2073-1E for general packaging, with marking compliant to MIL-STD-129 and no special markings required. The delivery destination is the Government of Israel, Ministry of Defense, with freight handled by G&B Packing Company in Jersey City, NJ. The contract is issued under solicitation SPE7M5-26-T-365G with a required delivery date of August 6, 2026, and is subject to all applicable DLA, DoD, and federal supply directives governing hazardous materials, government identification removal, and unit of issue conversions.

Electronic Connector Manufacturing

POSTED

about 5 hours ago

DEADLINE

STRIP, ELECTRICAL GROUN

Solicitation # SPE7M5-26-Q-0822

The contract is for a single unit of a STRIP, ELECTRICAL GROUND with NSN 5999-01-738-6818, issued under solicitation SPE7M5-26-Q-0822 by the Department of Defense’s Active Devices Division. Delivery is required within 20 days after delivery order, with responses due by August 17, 2026. The solicitation incorporates technical and quality requirements referenced by R or I numbers from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions unless amended. The item is subject to export control under either ITAR or EAR, restricting disclosure of associated technical data to foreign persons regardless of location and requiring prior authorization from the Department of State or Commerce. DFARS 252.225-7048 applies, and only contractors with approved US/Canada Joint Certification Program status, completed DOD export training, and DLA authorization may access the controlled data. Additional requirements include compliance with DLA packaging standards, removal of government identification from non-accepted supplies, physical identification of bare items, and application of covered defense information protocols. The point of contact is Andrew Bracken, with performance occurring at FPO, ZIP 34091.

Other Electronic Component Manufacturing

POSTED

about 5 hours ago

DEADLINE

RELAY, SOLID STATE

Solicitation # SPE7M5-26-T-365S

The contract is for the procurement of two solid state relays with NSN 5945-01-129-4673 and part number E3-25A0A from ALLIED CONTROLS, INC., issued under solicitation SPE7M5-26-T-365S by the Department of Defense’s Active Devices Division. Delivery is required within 20 days of contract award, with shipment to be made FOB origin to the Naval Undersea Warfare Center Division Keyport in Keyport, WA, using traceable freight methods exclusively—parcel post is prohibited. The unit of issue is each, with a fixed quantity of two units and no variance allowed. The item is classified as a critical application component, and all packaging must comply with MIL-STD-2073-1E, including specific preservation methods, container types, and marking per MIL-STD-129 with the special marking code ZZ. The contractor must also apply lead finish标识 in accordance with IPC/JEDEC J-STD-609 to each individual unit package, following exact placement guidelines from the standard. The required delivery date is May 28, 2026, with inspection and acceptance occurring at destination. Technical and quality requirements referenced via R and I numbers are governed by the DLA Master List of Technical and Quality Requirements, and the applicable revision is determined by the solicitation or award date. Payment terms and pricing are detailed under CLIN 0001 with a total price of $2.00 per unit. The contract includes specific government-use identifiers and contact details for Jeanette Heisey at DLA.

Relay and Industrial Control Manufacturing

POSTED

about 5 hours ago

DEADLINE

CONNECTOR, PLUG, ELEC

Solicitation # SPE7M5-26-T-365P

The contract specifies the procurement of a plug electrical connector identified by NSN 5935012201934 and part number MS3456W16-7P, following technical and quality requirements from the DLA Master List of Technical and Quality Requirements, particularly referencing SAE-AS34561 Revision A and SAE AS50151 Revision E. The item is classified as a Qualified Product List (QPL) item under Federal Stock Class 5935, requiring compliance with specific qualification standards outlined in Procurement Note H01. It is designated as a critical application item, mandating physical identification and bare item marking per TDP Rev A Gen 1 specifications. The unit of issue is each (EA), with a required quantity of five units delivered FOB origin within 52 days, with a need ship date of October 6, 2026, and original delivery deadline of October 23, 2026. Packaging must adhere to DLA Packaging Requirements and MIL-STD-129 for marking and labeling, with commercial packaging under ASTM D3951 unless hazardous, in which case Fed-Std-313 and TQ requirement IP025 apply. All DLA Master List requirements override commercial standards. Delivery is to the DLA Distribution Depot in Tinker AFB, Oklahoma, with inspection and acceptance occurring at destination. The purchase request number is 7016267945, with a unit price of $5.00 and total price of $25.00, and no variance allowed in quantity. The contract is issued under solicitation SPE7M5-26-T-365P, with primary point of contact Tate Shannon at the Department of Defense’s Active Devices Division.

Electronic Connector Manufacturing

POSTED

about 5 hours ago

DEADLINE

CONNECTOR, RECEPTACL

Solicitation # SPE7M5-26-T-365U

The contract pertains to the procurement of an electrical connector receptacle, specifically identified by part number TV01RW25-20S manufactured by AMPHENOL CORP and referenced through NSN 5935-01-664-5750, with a quantity of ten units required. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date depending on acquisition size. The item is classified as a critical application item and is subject to strict prohibitions against the use of Class I ozone-depleting substances in any phase of design, manufacturing, or testing unless explicit written approval is obtained from the contracting officer. This restriction does not apply to commercial items as defined by FAR 11.001 or to part-numbered-only items. Any substitution or administrative part number change must be supported by documentation from the approved manufacturer and is subject to prior approval before contract award. The item must be packaged in full compliance with MIL-STD-2073-1E and marked according to MIL-STD-129, with no special marking required and palletization adhering to DLA packaging standards. Delivery is FOB origin within twenty days of contract award, with no variance allowed in quantity. Inspection and acceptance both occur at the origin. The shipment is destined for the Government of Israel, Ministry of Defense, with specific freight forwarding instructions and handling codes provided. The contract is issued under Solicitation SPE7M5-26-T-365U, with a response deadline in August 2026 and an original required delivery date of August 4, 2026. The unit of issue is each, and all provisions reflect DLA and DoD acquisition protocols, including restrictions on substance use, strict packaging and marking compliance, and mandatory manufacturer authorization for any product substitution.

Electronic Connector Manufacturing

POSTED

about 5 hours ago

DEADLINE

DUMMY CONNECTOR, PLU

Solicitation # SPE7M5-26-T-365Q

This contract specifies the procurement of two dummy connectors, plug model 44106-61S1-J82 with NSN 5935016969379, under solicitation SPE7M5-26-T-365Q. The requirement is for delivery within 20 days to DULLES VA, with FOB origin terms and no variance permitted in quantity. All items must comply with MIL-STD-2073-1E packaging standards, including specific preservation methods, wrap materials, and container codes, and must be marked in accordance with MIL-STD-129 with no special marking required. Packaging and palletization must adhere to DLA’s RP001 requirements. The delivery is to be made to the German Armed Forces Command USA-CAN at Dulles International Airport, with the freight forwarder identified as DGY002. The item falls under NAICS code 334417 and is procured by the Department of Defense’s Active Devices Division. All technical and quality specifications referenced via R and I numbers are governed by the DLA Master List, with the applicable revision determined by the solicitation issue date. The contract includes detailed administrative and logistics codes for government use, including destination, project code, and shipping instructions, and requires delivery no later than August 6, 2026, with a response deadline for proposals on August 14, 2026.

Electronic Connector Manufacturing

POSTED

about 5 hours ago

DEADLINE

HEADSET, ELECTRICAL

Solicitation # SPE7M5-26-T-365R

The contract is for the procurement of 413 units of an electrical headset with NSN 5965-01-682-1143 under purchase request 7017696600, with a delivery requirement of 105 days after contract award. The solicitation number is SPE7M5-26-T-365R, issued on August 3, 2026, with responses due by August 14, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, and the applicable revision is determined by the solicitation or award date depending on the acquisition size. The alternate offeror must submit a complete data package including specifications for both the approved and alternate parts. The item falls under NAICS code 334310 and is being procured by the Department of Defense’s Active Devices Division with performance located in New Cumberland, Pennsylvania, zip 17070-5002. Primary point of contact is Matthew Stanko, reachable via email fmtewiq@dla.mil or phone 3128507245. Government identification must be removed from any non-accepted supplies, and no additional data is currently available for this requirement.

Audio and Video Equipment Manufacturing

POSTED

about 5 hours ago

DEADLINE

MICROCIRCUIT, DIGITA

Solicitation # SPE7M5-26-T-365K

This contract pertains to the procurement of a digital microcircuit identified by NSN 5962-01-703-1900 and part number AD8310ARMZ from Analog Devices, Inc., with a quantity of 60 units required under solicitation SPE7M5-26-T-365K. The item falls under Federal Supply Class 5962 for Electronic Microcircuits and is designated as a critical application item, subject to strict traceability, quality, and packaging controls. All supplies must originate from qualified sources listed in the Qualified Suppliers List of Distributors and Qualified Testing Suppliers List, with compliance to procurement note M01 ensuring authenticity and legitimacy throughout the supply chain. Contractors are mandated to maintain and submit comprehensive supply chain traceability documentation in accordance with DLA Procurement Note C03, including the completed DLA Land and Maritime Form 918, which must be emailed to the designated government address at least 15 days before delivery and approved prior to shipment. Shipment cannot proceed without written authorization, and failure to meet documentation requirements will render payment non-final. The microcircuit must be packaged and marked in strict accordance with MIL-STD-2073-1E and MIL-STD-129, including ESD and EMI protective measures per MIL-PRF-81705 specifications, utilizing only certified barrier materials sourced from qualified manufacturers on the QPL-81705. Each unit package must bear appropriate lead finish markings in compliance with IPC/JEDEC J-STD-609, and packaging must include adequate cushioning to prevent physical damage to leads and terminals. Special ESD marking code 39 is required to denote the component’s sensitivity, and preservation methods must follow the prescribed codes for drying, wrapping, and containment. The delivery is FOB origin with a 226-day lead time, and the item is to be delivered to the DLA Distribution center in Columbus, Ohio, with no tolerance for surplus product. All compliance documentation, including test reports and traceability records, must be submitted via email in compressed format under a specified naming convention, with individual file sizes not exceeding 15 megabytes. Payment is contingent upon full adherence to all technical, quality, and packaging directives issued by DLA.

Semiconductor and Related Device Manufacturing

POSTED

about 5 hours ago

DEADLINE

RESISTOR, FIXED, FILM

Solicitation # SPE7M5-26-T-365J

This contract specifies the procurement of 12 fixed film resistors with part number RK73H2ALTD2212F and NSN 5905-01-655-0207 under solicitation SPE7M5-26-T-365J. The item must strictly comply with technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, and packaging must conform to MIL-STD-2073-1E and DLA packaging standards, including specific preservative methods, wrapping materials, and unit container codes. Marking is to follow MIL-STD-129 with no special markings required, and palletization must adhere to DLA packaging guidelines. Delivery is due within 20 days of contract award, with FOB origin terms and zero variance allowed in quantity. Inspection and acceptance occur at the point of origin, and the shipment destination is the Army Aviation Depot in Tainan City, Taiwan, with designated point of contact and freight details provided. The requested delivery date is August 4, 2026, and the contract is governed by DLA procedures for freight forwarding and transportation.

Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 5 hours ago

DEADLINE

DISPLAY, OPTOELECTRO

Solicitation # SPE7M5-26-T-365T

This contract, issued under solicitation SPE7M5-26-T-365T, is a total small business set-aside for the procurement of a display and optoelectronic component with NSN 5980-01-593-7305 and part number CA66733-001, designated as a critical application item by Moog Inc and Thales USA, Inc. Eighteen units are required to be delivered FOB origin within 80 days of contract award, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. The item must comply with DLA packaging standards per MIL-STD-2073-1E and MIL-STD-129 marking requirements, including specific preservation methods, containment materials, and package codes, while strictly prohibiting mercury or mercury-containing compounds in preservation, packaging, and marking. Portable fluorescent lamps or instruments containing mercury must include shockproof construction and a secondary containment boundary as defined by NAVSEA 5100-003D, with exceptions only for approved functional uses in batteries, instruments, weapon systems, or specified chemical reagents. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with the applicable revision determined by the solicitation or award date. Deliveries must be routed to the DLA Distribution facility in New Cumberland, Pennsylvania, with transportation governed by DLAD procedural notes C19 and C20, and the required ship date is November 3, 2026, with an original delivery deadline of January 28, 2027. The contract value is $324.00 at a unit price of $18.00 per unit.

Semiconductor and Related Device Manufacturing

POSTED

about 5 hours ago

DEADLINE

Solicitation # SPE7M5-26-T-365L

The contract is for the procurement of 1,429 units of JACK, TIP with NSN 5935-00-466-1245 under solicitation SPE7M5-26-T-365L, issued by the Department of Defense’s Active Devices Division. Delivery is required FOB origin within 174 days, with a specified need ship date of February 5, 2027, and no variance in quantity allowed. All items must be inspected and accepted at the destination, and packaging must comply with DLA’s Master List of Technical and Quality Requirements, which override any other standards including ASTM D3951. Non-hazardous items must be commercially packaged per ASTM D3951, while hazardous items must adhere to FED-STD-313 and TQ requirement IP025. All packaging and labeling must follow MIL-STD-129, and palletization must meet RP001 packaging requirements. The use of Class I ozone-depleting substances is strictly prohibited in any phase of manufacturing or processing unless explicit written approval is obtained from the Contracting Officer, and this prohibition supersedes all referenced specifications without affecting performance standards. Sampling inspection is governed by MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise stated, and attributes must be verified at specified levels: VII for critical, IV for major, and II for minor, or their corresponding AQLs. The unit of issue is EA, and delivery must be shipped to the DLA Distribution facility in New Cumberland, PA. The contract imposes strict compliance with technical and quality standards referenced via R and I numbers in the DLA Master List, with revisions controlled by either the solicitation issue or award date depending on acquisition size. Commercial items as defined in FAR 11.001 and part-numbered-only items are exempt from the ozone-depleting substance prohibition. All items must be marked per RQ017 physical identification requirements, and government identification must be removed from any non-accepted supplies as per RQ011. The contract specifies the point of contact for inquiries as Margaret Smith, with email and phone provided. The solicitation was posted on August 3, 2026, with responses due by August 14, 2026, and the NAICS code is 33441

Electronic Connector Manufacturing

POSTED

about 5 hours ago

DEADLINE