Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Aluminum Alloy 6061-T6 Sheet Supply

Active

Federal

Response Deadline11/16/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the supply of 27 aluminum alloy 6061-T6 metal sheets measuring 0.063 by 36 by 96 inches for prime contractors supporting Department of Defense supply contracts. The materials must strictly conform to drawing 01735 and adhere to SAE AMS4027P, ASTM B660, and ASTM B666 standards. Essential compliance requirements include a QSLD listing and the provision of Mill-Material Certification to ensure quality and authenticity. Logistically, the sheets must be packaged according to MIL-STD-129 and RP001 guidelines. Delivery is designated as FOB Origin to the DLA Distribution center in Warner Robins, Georgia. The opportunity is categorized under NAICS code 331315, with a response deadline set for November 16, 2026.

General Info

Supply 27 aluminum alloy sheets to DLA Warner Robins by November 16, 2026.

Agency

Department Of Defense → WARNER ROBINS

NAICS

331315 - Aluminum Sheet, Plate, and Foil Manufacturing

Place of Performance

ROBINS A F B, GA, 31098-1887, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE8E4-27-T-0257.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

SHEET, METAL

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 4

subcontract

Response DeadlineNov 16

Submission deadline

Response Deadline

11/16/2026, 05:00:00 PM UTCin 12 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → WARNER ROBINS

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → WARNER ROBINS

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies aluminum alloy metal sheets for prime contractors delivering DLA supply contracts. Provides 27 sheets (0.063" x 36" x 96") conforming to Alloy 6061 Temper T6 and standards SAE AMS4027P, ASTM B660, and ASTM B666 per drawing 01735. Requires QSLD listing and Mill-Material Certification. Packages per MIL-STD-129 and RP001. Delivers 27 sheets FOB Origin to DLA Distribution Warner Robins, Georgia.

Similar Contracts

Same NAICS industry code

Solicitation # SPE8E4-27-T-0256

Solicitation SPE8E4-27-T-0256 is a Request for Quotations issued by DLA Troop Support for the procurement of 75 units of aluminum alloy metal plate (NSN 9535003249560). The material must be 0.250 inches thick, 36.00 inches wide, and 96.00 inches long, conforming to Alloy 6061 Temper T651 and various ASTM and MIL-STD specifications. Eligibility for award is strictly limited to suppliers listed on the Qualified Suppliers List for Distributors (QSLD) for FSGs 95 and 96. The contract requires a Certificate of Quality Compliance (Mill-Material Certification) with every shipment and mandates strict adherence to exact dimensions, as test coupons are not permitted. Delivery is specified as FOB Origin with a required delivery date of April 14, 2027, and a need ship date of April 12, 2027, shipping to the DLA Distribution DDSP New Cumberland Facility. Packaging and marking must comply with MIL-STD-129, MIL-STD-2073-1E, and ASTM B660, including specific continuous identification markings on each unit. The procurement incorporates several key regulatory clauses, including the Buy American and Balance of Payments Program, destination inspection per FAR 52.246-1, and cybersecurity requirements under DFARS 252.204-7012. Invoicing and payment must be processed through the Wide Area Workflow (WAWF) system.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 11 hours ago

DEADLINE

Aluminum Blanks

Solicitation # SV0120-27

UNICOR, Federal Prison Industries, Inc., is soliciting quotes for a two-year, firm-fixed-price, indefinite delivery-indefinite quantity (IDIQ) contract for the procurement of 3105-H14 aluminum blanks. This requirement is a 100% set-aside for small businesses under NAICS 331315. The contract includes three specific line items for aluminum sheets of varying dimensions: 7 by 10 inches (50,000 units), 4.5 by 5 inches (20,000 units), and 2.5 by 15 inches (1,000 units), all with a thickness of .040 inches and yellow/yellow masking. The government guarantees a contract minimum of 40,000 units in any combination, with individual delivery orders ranging from a minimum of 4,000 to a maximum of 10,000 units. Delivery is FOB Destination to the UNICOR facility in Cumberland, Maryland, with packaging required to comply with ASTM D-3951-95. Proposals are due by November 13, 2026, at 2:00 PM EST and must include a signed SF1449, technical descriptions, country of origin, and three business management questionnaires for past performance. Award evaluation will be based on technical specifications, price, past performance, and delivery time, with technical specifications and past performance weighted as more important than price. Offerors must be registered in the System for Award Management (SAM) and hold their pricing firm for 60 calendar days from the receipt of offers.

Dba Federal Prison Industries United States Department Of Justice

POSTED

about 16 hours ago

DEADLINE

HPG Vaporizer Fan Shroud Smooth Grating

Solicitation # 80NSSC27948324Q

The National Aeronautics and Space Administration, through the NASA Shared Services Center, is soliciting quotes for the procurement of 16 pieces of smooth surface aluminum grating. The materials are specified as Aluminum 6063-T52 or equivalent, with dimensions of 3/16 inch thickness, 1 inch height, 3 feet in width, and 24 feet in length. These components will be used to fabricate protective shrouds for the High Pressure Gas Facility Vaporizer fans at the Stennis Space Center in Mississippi to protect personnel and property from potential mechanical failures. This is a firm-fixed-price contract set aside for small businesses under NAICS code 331315. Award will be made based on the lowest price technically acceptable offer, provided the offeror is registered in the System for Award Management and meets all technical specifications. Delivery is required as FOB Destination to the SSC Weld Shop at Stennis Space Center. Quotes must be submitted to Tracy Bremer by November 4, 2026, and must include the contractor's UEI/Cage code, two points of contact, and the after-receipt-order delivery time. Payment terms are set at NET 30.

NASA Shared Services Center

POSTED

about 16 hours ago

DEADLINE

Supply of Aerospace-Grade Aluminum StockThis subcontract involves the supply of raw aerospace-grade aluminum stock for prime contractors working on DLA Aviation projects under the Department of the Navy. The provider is responsible for sourcing and certifying aluminum alloy according to specific NSN specifications, ensuring full material traceability and the provision of Mill Test Reports to meet Critical Safety Item requirements. All materials must adhere to the Buy American and Balance of Payments Program standards. The performance of this contract takes place in Philadelphia, Pennsylvania, under NAICS code 331315. The solicitation was posted on November 4, 2026, with a response deadline of December 4, 2026.

Pa DLA Aviation At Philadelphia

POSTED

about 23 hours ago

DEADLINE

Supply of Hazardous Material Absorbent Pads (NSN 4235-01-543-9092)This subcontract involves the manufacture and supply of hazardous material absorbent pads under NSN 4235-01-543-9092 for the DLA Weapons Support Nuclear Reactor Program. The contractor is responsible for producing 27 rolls of absorbent material, each measuring 38 inches wide, 0.375 inches thick, and 144 feet in length. To meet environmental and legal standards, the products must be made from 100 percent recovered material in accordance with RCRA and EPA regulations, and the contractor must ensure full compliance with the Buy American Act and provide Recovered Material Certification. All items must be packaged and marked according to MIL-PRF-23199E, MIL-STD-129, and DLA RP001 specifications. The delivery terms are FOB Origin, with the final destination being DLA Distribution DDSP New Cumberland. This procurement falls under NAICS code 331315 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Aluminum Alloy 7075 Sheet SupplierThis subcontract involves the supply of high-strength Aluminum Alloy 7075 sheets for prime contractors working on DLA Troop Support procurement projects. The required materials must conform to QQ-A-250/24 with T-76 solution heat treatment, featuring specific dimensions of 0.0800 inches in thickness, 48 inches in width, and 12 feet in length. The contract mandates the delivery of seven sheets to Tinker AFB, OK, accompanied by Mill-Material Certification. To ensure quality and regulatory compliance, the supplier must maintain a QSLD listing and adhere to MIL-STD-2073-1E and MIL-STD-129 standards. This opportunity is managed under NAICS code 331315 for the Department of Defense, with a response deadline set for November 16, 2026.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Supply of Aluminum Alloy 2024 TMPR T3 Metal SheetsThis subcontract, managed by Construction & Equipment MRO SVC I for the Department of Defense, involves the supply of high-specification aluminum alloy 2024 TMPR T3 metal sheets for defense procurement projects. The required materials must be 0.125 inches by 48 inches by 144 inches and strictly adhere to SAE AMS-QQ-A-250/4B, ASTM B666/B666M-20, and ASTM B660-23 standards. The delivery consists of two sheets accompanied by a Certificate of Quality Compliance. Compliance requirements include QSLD certification and packaging that meets MIL-STD-2073-1E specifications. The place of performance is located in New Cumberland, Pennsylvania. Interested parties must note the response deadline of November 16, 2026, for this procurement under NAICS code 331315.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Solicitation # SPE8E9-27-T-0460

This solicitation, issued by DLA Troop Support, is for the procurement of 39 feet of high-strength round metal bars, Grade AH-36, with a 1.375-inch outer diameter and lengths between 10 and 12 feet. The material must comply with American Bureau of Shipping rules for building and classing steel vessels and be produced by an approved steel mill. This is a small business set-aside procurement with a delivery requirement of 160 days after order, with a target ship date of April 26, 2027. Delivery is FOB Origin to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Eligibility for award is strictly limited to suppliers listed on the Qualified Suppliers List for Distributors (QSLD). A Certificate of Quality Compliance (Mill-Material Certification) is mandatory for every shipment and must be provided to both the customer and the contracting officer. The contract mandates strict adherence to continuous identification markings, including the contract delivery order number, NSN, specification number, grade, manufacturer's name, and dimensions; failure to comply with these marking requirements will result in the rejection of the product. Packaging and preservation must follow MIL-STD-129, MIL-STD-2073-1E, and MIL-STD-163, with special packaging codes Z and ZZ adhering to ASTM A700. Inspection and acceptance will take place at the destination.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Aluminum Bronze Flat Bar SupplierThis small business set-aside subcontract involves the supply of precision-cut aluminum bronze flat bars for prime contractors supporting Army Contracting Command projects at the Watervliet Arsenal. The scope of work requires the manufacture or sourcing of specific alloys, including C62400 per ASTM B150, C95400HT, or C95500 per ASTM B 505/B 505M. Strict precision cutting tolerances are mandated at +/-.05 inches for length and +/-.02 inches for width and thickness. The contractor is responsible for delivering a total of 72 units accompanied by Certified Test Reports. Compliance with the Buy American Act and MIL-STD-129 marking standards is required. This Department of Defense opportunity falls under NAICS code 331315 and is designated for small business entities.

POSTED

DEADLINE

Aluminum Bronze Strip for the Watervliet Arsenal

Solicitation # W911PT27QA023

Solicitation W911PT27QA023 is a Total Small Business Set-Aside for the procurement of Aluminum Bronze Strip flat bars for the Watervliet Arsenal in Watervliet, New York. The Department of Defense intends to award a single Firm Fixed Price purchase order to the offeror providing the lowest evaluated bid that meets all material requirements and responsibility criteria under FAR 9.104. The requirement consists of two line items: 38 flat bars measuring 49.55 inches long by 0.76 inches wide by 0.197 inches thick, and 34 flat bars measuring 49.55 inches long by 0.51 inches wide by 0.197 inches thick. Materials must conform to Aluminum Bronze C62400 per ASTM B150, or alternatively C95400HT or C95500 per ASTM B 505/B 505M, with specific minimums for tensile strength, yield strength, elongation, and Rockwell hardness. Deliverables must be delivered FOB Destination within 60 calendar days from the date of award. Each shipment requires a Certified Test Report documenting all necessary chemical and mechanical tests. Unique item identifiers must be marked using two-dimensional data matrix symbology complying with ISO/IEC International Standard 16022, and packaging must adhere to MIL-STD-129. Proposals must be submitted electronically via the PIEE Solicitation Module and must offer the total quantity of items to be considered for award. Evaluation will be conducted in accordance with the Buy American Act and DFARS Part 225.

POSTED

DEADLINE

Aircraft-Grade Aluminum Plate SupplyThis subcontract involves the supply of raw aircraft-grade aluminum structural plate material to prime contractors supporting the Department of Defense, specifically the DLA Weapons Support ASC Supplier Oper OEM Division. The materials must strictly adhere to the technical data specified under NSN 1560012742326 to meet rigorous aerospace structural standards. To ensure full compliance, the provider is required to furnish complete material certifications and Mill Test Reports for all delivered stock. The performance of this contract is centered at Tinker AFB, zip code 73145-8000. Interested parties should note that the response deadline is November 10, 2026, and the procurement falls under NAICS code 331315.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Solicitation # SPE8E9-27-T-0415

Solicitation SPE8E9-27-T-0415 is a request for quotations issued by DLA Troop Support for the procurement of 30 aluminum alclad metal sheets under NSN 9535-00-236-7083. The required material must be 0.071 inches thick, 48 inches wide, and 144 inches long, featuring a cladding thickness of 0.0018 inches on both sides. The procurement is split into two delivery locations: two sheets to DLA Distribution Warner Robins and 28 sheets to DLA Distribution Depot Oklahoma. Delivery is required within 45 days after order, with a need ship date of December 29, 2026, and an original required delivery date of February 3, 2027. Terms are FOB Origin, and inspection and acceptance will occur at the destination. Eligibility for award is strictly limited to suppliers listed on the Qualified Suppliers List for Distributors (QSLD). Technical compliance requires adherence to SAE AMS4048R, ASTM B660, and ASTM B666/B666M-20 standards. Contractors must provide a Certificate of Quality Compliance with every shipment and ensure all units are marked with continuous identification, including the DLA contract delivery order number, NSN, and manufacturer details. Packaging must follow MIL-STD-2073-1E and RP001, utilizing robust four-corner and full-coverage edge protection. Payment requests and receiving reports must be submitted electronically via the Wide Area WorkFlow system.

Defense Logistics Agency

POSTED

DEADLINE

More opportunities from Department Of Defense → WARNER ROBINS

Same awarding agency

MIL-STD-129 Compliant Packaging and MarkingThis subcontract involves providing specialized military-grade packaging and marking services for aluminum plates on DLA Warner Robins metal component projects. The contractor is responsible for applying continuous identification markings and executing packaging processes in strict accordance with MIL-STD-129, MIL-STD-2073-1E, and ASTM B660 standards. All work must be performed using industrial metal marking equipment and approved MIL-SPEC packaging materials to ensure components are ready for shipment. The project is managed under the Department of Defense for the Warner Robins agency, with the place of performance located at Robins Air Force Base. This opportunity falls under NAICS code 561910 and was posted on November 4, 2026, with a response deadline of November 16, 2026.

Packaging and Labeling Services

POSTED

about 11 hours ago

DEADLINE

Aluminum Alloy 7075-T651 Plate SupplierThis subcontract involves the supply of three aluminum alloy 7075-T651 metal plates measuring 3.00 by 32.00 by 120.00 inches for prime contractors working on Department of Defense procurement projects at DLA Warner Robins. The materials must strictly adhere to NSN 9535008571682 and ASTM B660 standards, and the supplier is required to provide Mill-Material Certification with delivery handled as FOB Origin. To be eligible, the supplier must maintain approved distributor status within the Qualified Suppliers List program and ensure full compliance with the Buy American Act. The performance of this contract is centered at Robins Air Force Base, with a response deadline set for November 16, 2026.

Metal Service Centers and Other Metal Merchant Wholesalers

POSTED

about 11 hours ago

DEADLINE

Aluminum Alloy Plate SupplierThis subcontract involves the supply of ten aluminum alloy metal plates to prime contractors supporting DLA Troop Support contracts for the Department of Defense. The required plates must measure 0.750 inches in thickness, 36.00 inches in width, and 96.00 inches in length, corresponding to NSN 9535002428611. All deliverables must strictly adhere to RP001 DLA Packaging Requirements for Procurement and include all necessary shipment markings. The procurement is managed through the Warner Robins office with performance taking place at Robins Air Force Base. Interested parties must respond by November 16, 2026, regarding this requirement categorized under NAICS code 332322.

Sheet Metal Work Manufacturing

POSTED

about 11 hours ago

DEADLINE

Solicitation # SPE8E4-27-T-0257

This procurement is for the supply of 27 aluminum alloy metal sheets, specifically 0.063 inches thick, 36.00 inches wide, and 96.00 inches long, with a reference weight of 21.33 lbs per sheet. The material must conform to Alloy 6061 Temper T6 and adhere to technical standards including SAE AMS4027P, ASTM B660, and ASTM B666, as well as reference drawing 01735. This is a critical application item requiring a Certificate of Quality Compliance (Mill-Material Certification) with every shipment. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible for award, and any deviations from this requirement must be explicitly indicated by the offeror. Delivery is required within 160 days of award, with a need ship date of April 26, 2027, and shipping is designated as FOB Origin to DLA Distribution Warner Robins, Georgia. Strict packaging and marking requirements apply, including compliance with MIL-STD-129 and RP001, with specific mandates for continuous identification markings such as the contract delivery order number, NSN, and manufacturer details. Inspection and acceptance will occur at the destination. Invoicing must be processed electronically through the Wide Area WorkFlow (WAWF) system. The contract incorporates various FAR and DFARS clauses, including those related to the Buy American Act, safeguarding covered defense information, and the prohibition of certain telecommunications equipment.

Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and Extruding

POSTED

about 11 hours ago

DEADLINE

Solicitation # SPE8E4-27-T-0241

Solicitation SPE8E4-27-T-0241 is a request for quotations for the procurement of three aluminum alloy metal plates, identified by NSN 9535008571682. Each plate must measure 3.00 inches in thickness, 32.00 inches in width, and 120.00 inches in length, with a reference weight of 1163.52 lbs per piece. The material must be Alloy 7075 Temper T651 and conform to exact dimensions, as test coupons are not permitted. The items are designated as critical application items and must be delivered FOB Origin to DLA Distribution Warner Robins, Georgia, with a required delivery date of January 11, 2027, and a delivery window of 104 days after award. Compliance with the Qualified Suppliers List (QSL) program is mandatory, and only approved QSL distributors are eligible for award. Contractors must provide a Certificate of Quality Compliance (Mill-Material Certification) with every shipment. Strict marking and packaging requirements apply, including adherence to MIL-STD-129 and ASTM B660, with continuous identification markings required on each unit. Inspection and acceptance will occur at the destination. The procurement is governed by various FAR and DFARS clauses, including the Buy American Act, safeguarding of covered defense information, and electronic invoicing via the Wide Area WorkFlow system.

Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and Extruding

POSTED

about 11 hours ago

DEADLINE

Solicitation # SPE8E4-27-T-0254

Solicitation SPE8E4-27-T-0254 is a small business set-aside request for quotations issued by DLA Troop Support Construction and Equipment for ten aluminum alloy metal plates. Each plate must measure 0.750 inches thick, 36.00 inches wide, and 96.00 inches long, with a reference weight of 253.92 lbs per piece. The material must be Alloy 6061 Temper T651 and comply with standards including SAE AMS4027P, ASTM B660, and ASTM B666. Delivery is required within 160 days after order to DLA Distribution Warner Robins, with an original required delivery date of January 4, 2027. Eligibility for award is strictly limited to suppliers listed on the Qualified Suppliers List for Distributors (QSLD) for FSGs 95 and 96. The contract mandates rigorous quality and identification requirements, including a Certificate of Quality Compliance (Mill-Material Certification) and continuous identification markings on each unit. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129. Inspection and acceptance will occur at the destination. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.

Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and Extruding

POSTED

about 11 hours ago

DEADLINE

Supply of 304 Stainless Steel Flat BarsThis subcontract involves the supply of 542 feet of 304 grade stainless steel flat bars to prime contractors supporting DLA Troop Support Construction and Equipment contracts. The material must be hot finished, annealed, and measure 0.250 inches thick by 1.500 inches wide, with lengths ranging between 10 and 12 feet. All supplies must strictly adhere to STEEL COMP 304 specifications, NSN 9510-01-240-9001, and DLAD quality requirements. Managed by the Department of Defense through the Warner Robins office, the performance of this contract takes place at Robins Air Force Base. The opportunity was posted on November 3, 2026, with a response deadline of November 16, 2026. The procurement falls under NAICS code 332999.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Solicitation # SPE8E4-27-T-0222

Solicitation SPE8E4-27-T-0222 is a request for quotations from the DLA Troop Support Construction and Equipment Metals office for the procurement of 542 feet of 304 stainless steel flat bars. The material must be hot finished, annealed, and measure 0.250 inches thick by 1.500 inches wide, with lengths provided in whole feet between 10 and 12 feet. Delivery is required within 160 days after order, with a quantity variance of plus or minus 10 percent allowed. The shipment is destined for DLA Distribution Warner Robins, Georgia, with FOB terms set as Origin. Eligibility for award is strictly limited to suppliers listed on the Qualified Suppliers List for Distributors (QSLD) for FSGs 95 and 96. The contractor must provide a Certificate of Quality Compliance (Mill-Material Certification) with every shipment and adhere to rigorous marking requirements, including the DLA contract delivery order number, NSN, and manufacturer details. Packaging and marking must comply with MIL-STD-129, MIL-STD-2073-1E, and ASTM A700. Payment will be processed electronically via Wide Area Workflow (WAWF), and the procurement incorporates various FAR and DFARS clauses, including the Buy American Act and safeguarding requirements for covered defense information.

Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

DEADLINE

Supply of Aluminum Alloy Alclad SheetsThis HUBZone set-aside subcontract involves the supply of Aluminum Alloy Alclad sheets to prime contractors supporting DLA Troop Support Metals contracts for the Department of Defense in Warner Robins. The required materials must feature a cladding thickness of 0.002 inches on both sides, with overall dimensions of 0.100 inches in thickness, 48.00 inches in width, and 168.00 inches in length. All sheets must be delivered in whole feet lengths according to the specified minimum and maximum length requirements. Performance for this contract is centered at Robins Air Force Base, and interested parties must adhere to the response deadline of November 9, 2026.

Rolled Steel Shape Manufacturing

POSTED

DEADLINE

Supply of Pneumatic Inflation Valves (NSN 4220-01-709-1886)This subcontract involves the procurement and delivery of four pneumatic inflation valves, identified by NSN 4220-01-709-1886, to support prime contractors on DLA Troop Support Construction and Equipment projects. Managed under the Department of Defense through the Warner Robins agency, the contract requires strict adherence to Buy American Act standards and the maintenance of comprehensive supply chain traceability documentation in accordance with clause C03. The performance of this contract is centered in the 31098-1887 zip code area, falling under NAICS code 423830. The agreement mandates that the hardware be delivered directly to the designated consignee to ensure the operational readiness of the associated construction and equipment projects.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

in about 13 hours

Supply of Refrigerant Heat Interchangers (NSN 4130014911963)This subcontract involves the supply of five refrigerant heat interchangers under NSN 4130014911963 for Department of Defense procurement projects managed by the Air Force at Warner Robins. The contractor is responsible for manufacturing or sourcing components in strict accordance with part number 4101447 from Ontic Engineering and Manufacturing and TDP Rev A Gen 1 specifications. The project requires the delivery of five completed units to a government destination at Robins Air Force Base. Due to the nature of the work, the contractor must maintain compliance with NIST SP 800-171 standards for the secure handling of covered defense information.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

VALVE, PNEUMATIC INFLAT

Solicitation # SPE8E5-27-Q-0046

Solicitation SPE8E5-27-Q-0046 is a firm fixed price request for the procurement of four pneumatic inflator valves, identified by NSN 4220-01-709-1886 and part number 62314-1 from Air Cruisers Company, LLC. This item is classified as a commercial off the shelf critical application item. The required delivery date is May 11, 2027, with a delivery lead time of 120 days after order. Shipping and acceptance are both set at the destination, specifically DLA Distribution Warner Robins in Georgia. The contract mandates strict quality and technical compliance, including SAE AS9100 higher level quality requirements and FAA airworthiness approval. Sampling must follow MIL-STD-1916 or ASQ H1331, with a zero non-conformance requirement for acceptance. Packaging and marking must adhere to MIL-STD-129 and DLA procurement requirements RP001 and RP003. Additionally, the contractor must maintain supply chain traceability documentation per DLA Directive C03. Invoicing and payment will be processed electronically through the Wide Area WorkFlow system. This is not a small business set-aside.

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

DEADLINE

in about 13 hours

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS