Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Aluminum Alloy Material Supply (Raw Stock Supplier)

Active

Federal

Response Deadline08/17/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the supply of raw aluminum alloy 7075/T-6511 in billet or bar stock form, requiring full traceability and strict compliance with Department of Defense technical standards. The material must meet all associated quality, testing, and documentation requirements to ensure suitability for defense applications, with emphasis on material integrity and proven sourcing. All suppliers must adhere to the specified DLA technical specifications and provide certified test reports and material certifications to validate compliance. This is a HUBZone set-aside subcontract under NAICS code 331314, reserved for businesses located in Historically Underutilized Business Zones. The solicitation was posted on August 5, 2026, with a response deadline of August 17, 2026, and the place of performance is designated as Cherry Point, North Carolina, with a zip code of 28533-5040. The contracting entity is the Department of Defense, operating through the Cherry Point Phantom Rd Building office, and bids must be submitted via the DIBBS portal link provided. Participation is restricted to eligible HUBZone-certified small businesses meeting all regulatory and technical requirements.

General Info

HUBZone subcontract for DOD-grade aluminum 7075/T-6511 billet/bar, Cherry Point NC, via DIBBS, restricted to certified small businesses.

Agency

Department Of Defense → CHERRY POINT PHANTOM RD BLDGView Agency

NAICS

331314 - Secondary Smelting and Alloying of AluminumView NAICS

Place of Performance

CHERRY POINT, NC, 28533-5040, US

Set-Aside

HZC

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 5

subcontract

Response DeadlineAug 17

Submission deadline

Response Deadline

08/17/2026, 05:00:00 PM UTCin 8 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → CHERRY POINT PHANTOM RD BLDG

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → CHERRY POINT PHANTOM RD BLDG

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of raw aluminum alloy 7075/T-6511 billet or bar stock with full traceability and compliance to DLA technical standards.

Similar Contracts

Same NAICS industry code

High Magnesium Aluminum Alloy Plate ManufacturingThe contract calls for the manufacture and supply of high magnesium aluminum alloy plates that must comply with ASTM B928/B928M-15 and applicable military specifications, ensuring precise dimensional accuracy and complete material traceability from production through delivery. The products are intended for defense-related applications requiring stringent quality control and documented provenance, with all materials subject to rigorous testing and certification requirements. The work is designated as a Total Small Business Set-Aside under SBA rules, restricting eligibility solely to small businesses as defined by the Small Business Administration. The solicitation, issued by the DLA Dist San Joaquin under the Department of Defense, has a response deadline of August 20, 2026, and is classified as a subcontract. The North American Industry Classification System code is 331314, indicating this pertains to aluminum rolling, drawing, and extruding. Performance of the contract will occur at Tracy, California, with a zip code of 95304-5000. Interested parties must submit proposals through the DIBBS system at the provided web link prior to the deadline to be considered for award.

DLA DIST SAN JOAQUIN

POSTED

about 5 hours ago

DEADLINE

Aluminum Alloy Sheet Metal Supply

POSTED

about 5 hours ago

DEADLINE

Aluminum Plate Supply and DeliveryThe contract involves the supply and delivery of 6,000 pounds of aluminum alloy plate, two inches in thickness, to be provided in full compliance with military packaging, marking, and certification requirements. All materials must meet exacting defense standards to ensure suitability for federal use, with strict adherence to documentation and handling protocols throughout the fulfillment process. The delivery is scheduled for performance at the New Cumberland facility with a zip code of 17070-5002, indicating the location where the materials will be received and inspected. This is a subcontract under the NAICS code 331314, classified under the Department of Defense, specifically managed by the DDSP New Cumberland Facility. The solicitation was posted on August 9, 2026, with a response deadline of August 20, 2026, giving potential suppliers a limited window to submit bids. The contract is accessible via the DIBBS platform, and while no point of contact is specified, all proposals must align with the military-specific standards outlined in the requirements, ensuring traceability, quality, and readiness for deployment in defense-related applications.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 5 hours ago

DEADLINE

Aluminum Alloy Sheet Manufacturing and SupplyThe contract requires the manufacture and supply of aluminum alloy sheets measuring 0.016 inches thick by 48 inches wide by 144 inches long, with full compliance to ASTM B660 and ASTM B666 standards. Every shipment must include complete traceability and mill-certified quality documentation to ensure material integrity and adherence to federal specifications. This is a subcontract under a Total Small Business Set-Aside, classified under NAICS code 331314, meaning only small businesses as defined by the SBA are eligible to respond. The solicitation was posted on August 9, 2026, with a response deadline of August 20, 2026. Performance of the contract is designated for Robins Air Force Base, Georgia, with a ZIP code of 31098-1887. The contracting activity falls under the Department of Defense through the Construction & Equipment MRO SVC I office, and all submissions must be made through the DIBBS platform via the provided UI link.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 5 hours ago

DEADLINE

Aluminum Structural Angle Supplier (7075-T6511 Alloy)The contract requires the supply of 412 feet of structural aluminum angle, with a tolerance of ±10%, specifically designated as LS34383-1 and manufactured from Aluminum Alloy 7075 in T-6511 temper, ensuring compliance with applicable military and industry standards. The material must meet stringent mechanical and chemical requirements consistent with the specified alloy and temper to support structural applications requiring high strength and durability. The procurement is issued as a subcontract under the NAICS code 331314 for Aluminum Die and Gravity Casting, and is managed by the Department of Defense through the Warner Robins agency, with performance required at Robins Air Force Base, Georgia, 31098-1887. Responses must be submitted by August 17, 2026, with the solicitation posted on August 5, 2026, and all submissions are to be made through the DIBBS platform.

POSTED

DEADLINE

Aluminum Plate Manufacturing and SupplyThe contract calls for the manufacture and supply of 37 aluminum alloy plates, each with exact dimensions of 0.250 inches in thickness, 48.00 inches in width, and 144.00 inches in length. The scope encompasses full production responsibilities including material sourcing, precision cutting, rigorous quality assurance protocols, secure packaging, and timely delivery to the designated performance location in New Cumberland, Pennsylvania, with a zip code of 17070-5002. All work must adhere to stringent specifications to ensure dimensional accuracy and material integrity throughout the process. This is a subcontract classified as a Total Small Business Set-Aside under the SBA program, restricting eligibility exclusively to small businesses as defined by the FAR 19.5 regulations. The NAICS code 331314 identifies the industry as Aluminum Rolling, Drawing, and Extruding, reflecting the specialized manufacturing expertise required. The solicitation was posted on August 5, 2026, with a response deadline of August 17, 2026, and is managed by the Department of Defense through its DDSP New Cumberland Facility. All performance and delivery obligations must align with federal contracting standards under the oversight of this defense agency.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Supplier of Raw Aluminum Plate Material (High-Purity Aerospace Grade)The contract awards the supply of certified, traceable aerospace-grade aluminum plate stock to support critical fabrication processes within defense aerospace applications. The material must comply strictly with AMS and MIL-DTL specifications, ensuring high purity, consistent mechanical properties, and full lot traceability from melt to delivery. This is a subcontract under the Department of Defense, procured through the Defense Logistics Agency, and is designated under NAICS code 331314 for aluminum rolling, drawing, and extruding. The material will be used in the manufacture of components requiring exceptional strength-to-weight ratios and reliability under extreme operational conditions. Performance and delivery are expected to meet exacting quality assurance standards, with full documentation required to validate conformance throughout the supply chain. The contract was posted on August 5, 2026, and is linked to the DIBBS system for award and delivery tracking under reference SPE4A222D0014 and delivery order SPE4AX25F6186.

Defense Logistics Agency

POSTED

DEADLINE

Specialized Materials Supply for Aerospace PanelThe contract entails the supply of high-performance aerospace-grade raw materials, including aluminum alloys and advanced composites, strictly adhering to the technical specifications outlined in TDP Rev A Gen 1, with rigorous requirements for full material traceability and compliance with military packaging standards. These materials are critical for the fabrication of aerospace panels and must meet exacting quality and reliability benchmarks necessary for defense applications. The procurement is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration are eligible to respond, reinforcing support for small business participation in defense contracting. The North American Industry Classification System code 331314 designates this as a nonferrous metal rolling, drawing, and extruding operation. The solicitation was posted on August 5, 2026, with a deadline for responses set for August 13, 2026, and performance is to be carried out at Robins Air Force Base, Georgia, with a zip code of 31098-1887. While no specific point of contact or agency office address is provided beyond the overarching Department of Defense affiliation, the contracting activity falls under the ASC SUPPLIER OPER AE AND AF DIV. The contract’s operational context implies direct support to defense systems requiring certified materials with proven durability under extreme conditions, and all shipments must comply fully with military-grade packaging and documentation protocols to ensure integrity throughout the supply chain.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Supply of Raw Materials and Composite ComponentsThe contract entails the supply of specialized raw materials including aluminum alloys, composite cores, and structural adhesives essential for the fabrication of defense-grade structural panels. All materials must strictly comply with military specifications and the Defense Federal Acquisition Regulation Supplement to ensure suitability for critical defense applications. The materials will be used in the production of components that meet exacting performance, durability, and safety standards required by the Department of Defense. This is a subcontract issued under the Defense Logistics Agency with a NAICS code of 331314, indicating focus on aluminum rolling, drawing, and extruding. The contract was posted on August 5, 2026, and performance is expected to support defense manufacturing efforts without geographic restriction noted. Compliance with DFARS and MIL-SPEC requirements is non-negotiable, emphasizing quality control, sourcing integrity, and supply chain security throughout the delivery and manufacturing process.

Defense Logistics Agency

POSTED

DEADLINE

Supplier of Structural Aluminum Angle (7075-T6511)

CHERRY POINT PHANTOM RD BLDG

POSTED

DEADLINE

Aluminum Alloy Alclad Plate ManufacturingThe contract calls for the manufacture of precision aluminum alloy Alclad plates measuring 0.313 inches in thickness and 36 by 96 inches in dimensions, strictly adhering to military specifications SAE AMS-QQ-A-250/5C and relevant ASTM standards. Full traceability of materials and processes is mandatory, along with comprehensive certification to ensure compliance and quality throughout production. This requirement underscores the critical nature of the material application, likely for defense or aerospace systems where material integrity and consistency are non-negotiable. This is a total small business set-aside under the SBA program, designated under NAICS code 331314, and issued by the DLA Dist San Joaquin under the Department of Defense. The place of performance is specified as Tracy, California, with a zip code of 95304-5000. While the solicitation number and point of contact are not provided in the data, the posting date is August 5, 2026, and the response deadline is August 17, 2026. The contract is structured as a subcontract, indicating it may be part of a larger procurement chain governed by federal defense acquisition protocols.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

Materials Supply for Aircraft Skin ProductionThe contract calls for the supply of aluminum alloy sheet and composite materials specifically engineered to meet stringent DLA standards for use in aircraft skin fabrication, with an emphasis on material consistency, structural integrity, and performance under operational stress. Full traceability from raw material source through final product delivery is mandatory, accompanied by comprehensive certification documentation to verify compliance with technical specifications and quality assurance protocols. All materials must be certified to ensure suitability for aerospace applications, with particular attention to mechanical properties, dimensional tolerances, and surface finish requirements dictated by military aviation standards. Performance is required at Tinker Air Force Base with a zip code of 73145-8000, and the subcontract is issued under NAICS code 331314, aligning with aluminum rolling and extruding operations. The solicitation was posted on August 5, 2026, with responses due by August 13, 2026, and the contracting entity is the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The contract requires adherence to strict delivery schedules, documentation integrity, and material accountability to support the aerospace manufacturing lifecycle, with no set-aside provisions specified. All parties must comply with federal procurement obligations and maintain transparency throughout the supply chain.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

More opportunities from Department Of Defense → CHERRY POINT PHANTOM RD BLDG

Same awarding agency

Transportation and Logistics (Sea or Land)The contract pertains to logistics services for the FOB Origin delivery of valves, requiring the coordination of domestic or international transportation by land or sea in full compliance with DFARS transportation clauses. All transport activities must adhere to strict regulatory standards governing defense-related shipments, ensuring secure and compliant movement of critical components from origin point to designated destinations. The work scope encompasses end-to-end logistics planning and execution, with specific emphasis on meeting defense logistics protocols and supply chain integrity requirements. This is a total small business set-aside subcontract under NAICS code 484220, exclusively available to small business concerns as defined by the SBA. The solicitation was posted on August 9, 2026, with a response deadline of August 20, 2026, and performance is tied to the location of Cherry Point, North Carolina, under the oversight of the Department of Defense. The contract is managed through the DLA’s DIBBS platform, and vendors must respond prior to the deadline to be considered for award, with an expectation of full compliance with federal acquisition regulations and defense-specific logistical standards.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 5 hours ago

DEADLINE

Packaging, Labeling, and Hazard Communication ComplianceThe contract seeks a small business to provide comprehensive packaging, labeling, and hazard communication services aligned with OSHA 29 CFR 1910.1200 and MIL-STD-129 standards to support military shipment and storage operations. All labeling and communication must ensure accurate identification of hazardous materials, proper placarding, and compliance with federal and Department of Defense requirements for safe handling, storage, and transit. The work is performance-based and requires strict adherence to documentation protocols, material safety data sheets, and standardized military marking procedures to maintain operational readiness and regulatory compliance. The contract is set aside exclusively for small businesses under the SBA Total Small Business Set-Aside program, with the North American Industry Classification System code 561990 designating it as Other Support Services. The place of performance is identified as Cherry Point, North Carolina, with a response deadline of August 20, 2026, and the solicitation posted on August 9, 2026. This subcontract will be issued under the Department of Defense, with the performing agency listed as CHERRY POINT PHANTOM RD BLDG, and is accessible via the DIBBS platform for qualified vendors to submit proposals.

All Other Support Services

POSTED

about 5 hours ago

DEADLINE

Supply of Regulating Valves (Fluid/Flow Control)The contract entails the procurement and delivery of 51 regulating valves classified as Critical Application Items, intended for use in high-stakes fluid and flow control systems. These valves must be manufactured using traditional methods and fully comply with applicable military specifications to ensure reliability and performance under demanding operational conditions. The requirement is issued as a subcontract under a Total Small Business Set-Aside, designated by the SBA, ensuring that only small businesses are eligible to bid. The North American Industry Classification System code 332911 identifies the scope as miscellaneous fabricated metal product manufacturing, aligning with the precision engineering needed for these components. The solicitation was posted on August 9, 2026, with a strict response deadline of August 20, 2026. Performance will be centered at Cherry Point, North Carolina, with the delivery address specified as 28533-5040. The contracting activity originates from the Department of Defense, under the agency designation CHERRY POINT PHANTOM RD BLDG, indicating direct military operational use. The contract is accessible via the DIBBS platform, and bidders must adhere to all technical, compliance, and submission requirements outlined in the solicitation to qualify for award.

Industrial Valve Manufacturing

POSTED

about 5 hours ago

DEADLINE

Hazard Communication & Labeling Compliance

Environmental Consulting Services

POSTED

about 5 hours ago

DEADLINE

Specialized Packaging and Preservation Services

Packaging and Labeling Services

POSTED

about 5 hours ago

DEADLINE

Compliance & Certification Documentation Services

Engineering Services

POSTED

about 5 hours ago

DEADLINE

Precision Steel Bar Supply (4340 Alloy, Hot Finish, Annealed)

Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 5 hours ago

DEADLINE

Solicitation # SPE8E4-26-T-2044

The contract specifies the procurement of 68 feet of 4340 steel bar in hot finish, round, annealed condition with a 3.000 inch diameter and lengths strictly between 10 and 12 feet in whole-foot increments. The material must meet the SAE AMS6415 Rev V and SAE AMS2806 Rev D specifications and requires a Certificate of Quality Compliance with every shipment, which must be forwarded to the DLA Troop Support Contracting Officer. All units must be permanently marked with the DLA contract delivery order number, NSN, specification revision, alloy and temper, manufacturer’s name, heat and lot number, and dimensions using approved methods such as stenciling or labeling, with markings that are waterproof, legible, and non-contaminating. Adhesive labels are mandatory for bars under 0.250 inch in nominal diameter, and tags are acceptable for wire. Packaging must conform to MIL-STD-2073-1E and MIL-STD-129, with special preservation code ZZ per ASTM A700 and special marking code ZZ for additional requirements. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible, and deviations must be explicitly declared; non-compliance could result in rejection or criminal penalties. The material is to be delivered FOB origin to DLA Distribution Cherry Point, North Carolina, no later than 164 days from order, with a required delivery date of January 5, 2027. Inspection and acceptance occur at destination, and quantity variance is permitted between minus 10% and plus 10%. All documentation, including CDRL-METALSCERT and related technical data, must be submitted per DLA requirements, and failure to meet any marking, certification, or supplier eligibility criteria constitutes cause for rejection.

Iron and Steel Forging

POSTED

about 5 hours ago

DEADLINE

VALVE, REGULATING, FL

Solicitation # SPE7MC-26-T-187E

The contract is for the procurement of a regulating fluid valve with NSN 4820-01-564-5211, issued under solicitation SPE7MC-26-T-187E as a total small business set-aside under NAICS code 332911. Two delivery line items are specified: 14 units to be shipped to Cherry Point, North Carolina, with a need ship date of May 26, 2027, and 37 units to be shipped to Jacksonville, Florida, with a need ship date of March 17, 2027. Both deliveries are FOB origin with zero variance allowed in quantity and require inspection and acceptance at the destination. Packaging must comply with ASTM D3951 and be marked and labeled per MIL-STD-129, with palletization following DLA’s RP001 packaging requirements, which supersede ASTM standards. The DLA Master List of Technical and Quality Requirements governs all technical and quality specifications referenced by R or I identifiers. The unit of issue is each, with a total quantity of 51 units requested. All shipments must adhere to DLA transportation procedures C19 and C20, and the contract includes detailed delivery addresses, point of contact information, and a mandatory response deadline that has already passed.

Industrial Valve Manufacturing

POSTED

about 5 hours ago

DEADLINE

Defense Logistics Packaging and Marking ContractorThe contract requires specialized military-compliant packaging, preservation, and marking services for Defense Logistics Agency assets, with strict adherence to DLA standards. Core responsibilities include palletization of equipment and supplies, application of corrosion protection measures designated as ZZ, and accurate Data Matrix labeling for traceability and inventory management. All services must meet rigorous defense sector requirements to ensure operational readiness and logistical accuracy during transport and storage. The solicitation is issued as a subcontract under NAICS code 493190, with responses due by August 17, 2026. Performance is centered at Cherry Point, North Carolina, with a zip code of 28533-5040, and the contracting entity is the Department of Defense through its facility at Cherry Point Phantom Road Building. The opportunity is open to qualified subcontractors seeking to support critical defense logistics operations, with no specific set-aside designation announced. Interested parties must submit proposals through the DIBBS platform using the provided solicitation link prior to the deadline.

Other Warehousing and Storage

POSTED

DEADLINE

Hazardous Materials Compliance & Packaging SpecialistThe contract seeks a Hazardous Materials Compliance & Packaging Specialist to ensure full adherence to OSHA hazard communication standards for defense-related shipments. Key responsibilities include the preparation, documentation, and timely submission of Safety Data Sheets for all hazardous materials, as well as the accurate labeling of containers to meet regulatory requirements. The role demands precise coordination between material handling, shipping protocols, and federal safety mandates to guarantee the safe transport of classified and hazardous substances within military logistics channels. Performance is required at Cherry Point, North Carolina, with a focus on supporting Department of Defense operations through strict compliance and procedural accuracy. The position is structured as a subcontract under NAICS code 541690, indicating it falls under other scientific and technical consulting services. Proposals must be submitted by August 17, 2026, and the contract is tied to a specific military installation and its logistical demands, requiring specialized knowledge of defense shipment regulations and hazardous material handling protocols.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Aluminum Alloy Metal Bar SupplierThe contract requires the supply of 62 feet of aluminum alloy 7075 in T-73 temper, cold-finished, with a 3-inch diameter in the form of round bar segments measuring between 10 and 12 feet in length, allowing for a tolerance of plus or minus 10 percent in total length. All material must strictly comply with applicable military and ASTM specifications to ensure structural integrity, mechanical性能, and dimensional accuracy suitable for high-stress applications. The product must be delivered in a condition that meets the rigorous quality standards expected of defense-grade aerospace-grade aluminum. The solicitation is issued under the NAICS code 331512 for other aluminum rolling, drawing, and extruding, and is categorized as a subcontract within the Department of Defense procurement system. It was posted on August 5, 2026, with a response deadline of August 17, 2026. Performance is required at Cherry Point, North Carolina, with a zip code of 28533-5040. The contracting entity is listed as CHERRY POINT PHANTOM RD BLDG, indicating the delivery and fulfillment location is tied to a military installation. Bidders must ensure full technical and regulatory compliance to be considered, as failure to meet specified material or dimensional criteria will result in disqualification.

Steel Investment Foundries

POSTED

DEADLINE