Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

BEAM, STRUCTURAL

Active
SPE8E4-26-T-2010Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of structural beams made from aluminum alloy 7075/T-6511 with dimensions of 2.250 inches in height, 3.50 inches in width, and 0.156 inches in thickness, supplied in whole-foot lengths between 10 and 12 feet, weighing approximately 1.050 pounds per foot. All material must comply with technical and quality standards referenced in the DLA Master List, including certification requirements such as a Certificate of Quality Compliance (Mill-Material Certification) with each shipment, and mandatory continuous markings on every unit that include the DLA contract number, NSN, specification revision, alloy and temper, manufacturer’s heat and lot number, and dimensions. Markings must be legible, waterproof, and applied via stamping or stenciling without contaminating the material, and adhesive labels are required for smaller bars and tubes under 0.250 inches nominal OD. Packaging must follow MIL-STD-2073-1E and marking must conform to MIL-STD-129, with shipment labels including both units of measure if applicable. The material must be sourced exclusively from suppliers listed on the Qualified Suppliers List for Distributors (QSLD), and any deviation from this requirement constitutes an unauthorized substitution with potential criminal and civil penalties. The contract includes two line items totaling 17,160 feet—80 feet for delivery to Cherry Point, North Carolina, and 17,080 feet to Jacksonville, Florida—with a 42-day delivery window, a 10% quantity variance allowance, and FOB origin terms. Inspection and acceptance occur at the destination, and metal certification documentation must be submitted to the DLA Troop Support Contracting Officer. The solicitation is a HUBZone set-aside under NAICS code 332112, with response deadlines and technical data package references aligned to standards including SAE AMS-QQ-A-200/11A, ASTM B666/B666M-20, and NAS344.

General Info

Aluminum alloy beams, 2.250x3.50x0.156 in, 10–12 ft, 1.05 lb/ft, QSLD suppliers, MIL-STD marked, FOB origin, 42-day delivery.

Agency

Department Of Defense → CHERRY POINT PHANTOM RD BLDGView Agency

NAICS

332112 - Nonferrous ForgingView NAICS

Place of Performance

PHANTOM RD BLDG 147 BAY A, CHERRY POINT, NC, 28533-5040, US

Set-Aside

HZC

Documents

(1)

Request for Quotations SPE8E4-26-T-2010

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → CHERRY POINT PHANTOM RD BLDG
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → CHERRY POINT PHANTOM RD BLDG
View Agency Profile
Office AddressUS
Contacts
Drew Reily
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BEAM,STRUCTURAL
BEAM, STRUCTURAL
ALUMINUM ALLOY
7075/T-6511
H:2.250"
W:3.50"
THK:0.156"
10 TO 12 FT LG
1.050 LB/FT (REFERENCE)
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
Metal Certification Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information. If CDRL-METALSCERT is missing from DLA Technical Data Management Transformation (TDMT) they can also be viewed in the DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
A Certificate of Quality Compliance (Mill-Material Certification) is required. A copy of the Certificate of Quality Compliance shall be provided with every shipment to the customer or DLA depot, and a copy of the Certificate of Quality Compliance provided for each shipment shall be forwarded to the DLA Troop Support Contracting Officer identified on the award.
CONTINUOUS IDENTIFICATION MARKINGS ARE REQUIRED IN ADDITION TO THE
MARKING REQUIREMENTS CITED IN THE PROCUREMENT SPECIFICATION:
AS A MINIMUM, EACH UNIT OF ISSUE (FEET,PLATE, OR SHEET) SHALL BE
IDENTIFIED WITH THE (1) DLA CONTRACT DELIVERY ORDER NUMBER, (2) NSN, (3)
SPECIFICATION NUMBER AND REVISION, (4) GRADE,CLASS & TYPE, ALLOY, PART
NUMBER,DIE NUMBER, AND TEMPER, (5) MANUFACTURER'S NAME, HEAT AND LOT
NUMBER, (6) DIMENSIONS.
MATERIAL SHALL BE SUPPLIED WITHIN THE REQUIRED MIN-MAX LENGTH
REQUIREMENTS AND MUST IN WHOLE FEET LENGTH ONLY (I.E. 10, 11, OR 12 FT
EVEN)
SPE8E4-26-T-2010
SECTION B
PERMISSIBLE MARKING METHODS ARE STAMPING (EXCEPT DIE STAMP) OR
STENCILING. THE CHARACTERS SHALL BE OF SUCH A SIZE AS TO BE LEGIBLE AND
VISIBLE TO THE UNAIDED EYE. THE MARKING FLUID APPLIED SHALL NOT
CONTAMINATE, OR OTHERWISE HAVE A DETRIMENTAL EFFECT ON THE PRODUCT OR
ITS PERFORMANCE. THE MARKINGS SHALL BE WATERPROOF AND SUFFICIENTLY
STABLE TO WITHSTAND NORMAL HANDLING.
IN LIEU OF "LINE MARKINGS", ADHESIVE LABELS ARE REQUIRED FOR EACH UNIT
OF STRAIGHT BARS, TUBES AND SHAPES, UNDER 0.250 INCHES IN NOMINAL OD,
AND TO BE SECURELY FASTENED. TAGS WILL BE ACCEPTABLE METHOD FOR WIRES.
FAILURE TO COMPLY WILL BE CAUSE FOR REJECTION OF END PRODUCT."
IY010: QUALIFIED SUPPLIERS LIST FOR DISTRIBUTORS (QSLD) REQUIREMENT (DLA
TROOP SUPPORT JUNE 1994) FOR FSG'S 95 AND 96.
ONLY SUPPLIERS LISTED ON THE QSLD ARE ELIGIBLE FOR AN AWARD PURSUANT TO
THIS SOLICITATION.
SUPPLIERS NOT QUOTING IN COMPLIANCE WITH THE QSLD REQUIREMENT MUST
INDICATE THEY ARE DEVIATING FROM THE REQUIREMENTS OF THE SOLICITATION.
ANY BID/QUOTE/OFFER BASED ON A PRODUCT SUPPLIED BY OTHER THAN AN
APPROVED QSL DISTRIBUTOR, EVEN THOUGH THE PRODUCT MIGHT HAVE BEEN
MANUFACTURED IN ACCORDANCE WITH THE DRAWING(S) AND/OR SPECIFICATION(S)
AS CITED IN THE PURCHASE ORDER
TEXT (POT) IS A BID/QUOTE/OFFER WITH EXCEPTION AND MUST BE SO INDICATED
BY THE
QUOTER/OFFEROR.
ANY PRODUCT FURNISHED UNDER A CONTRACT OR ORDER FOR A PRODUCT DESIGNATED
AS PART OF THE QSL PROGRAM, UNLESS SPECIFICALLY AUTHORIZED BY THE
GOVERNMENT IN WRITING, MUST FULLY COMPLY WITH THE TERMS AND CONDITIONS
OF THE QSL PROGRAM. ANY PRODUCT, WHICH DOES NOT FULLY COMPLY WILL BE
CONSIDERED AN UNAUTHORIZED SUBSTITUTION, AND MAY YIELD CRIMINAL
PENALTIES IN ADDITION TO ANY CIVIL REMEDIES AVAILABLE TO THE GOVERNMENT.
FOR THIS SOLICITATION, AND ANY RESULTING ORDER ISSUED TO AN APPROVED
QSLM/QSLD SUPPLIER
WHOSE QUOTE IS BASED ON COMPLIANCE WITH THE QSL PROGRAM, (EXCEPT IN THE
CASE OF FMS (FOREIGN MILITARY SALE) REQUIREMENTS), REFERENCES TO SOURCE
INSPECTION ARE HEREBY WAIVED. IN SUCH CASES, COQC, PVT, QAP-EQ003, ASQ
H1331, AND RQ006: QUALITY CONFORMANCE INSPECTION REQUIREMENTS, IF
REFERENCED, DO NOT APPLY.
FOR MORE INFORMATION ABOUT THE QSL PROGRAM GO TO THE FOLLOWING WEBSITE:
https://www.dla.mil/TroopSupport/IndustrialHardware/Engineering-and-Tech nical-services/Qualified-Suppliers-List/
-ORWRITE TO: DLA TROOP SUPPORT, ATTN: DLA TROOP SUPPORT FHTF, BLDG 3/B, 700 ROBBINS AVENUE, PHILADELPHIA, PA 19111-5092
Qualification requirements in procurement note #M03 Qualified Suppliers List for Manufacturers (QSLM)/Qualified Suppliers List for Distributors (QSLD) for Troop Support# apply. The full text of procurement note M03 can be found in the DLA Directive (DLAD) of Procurement Notes on the Web at: https://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx.
(END STO)
TDP Rev A Gen 1 IAW BASIC NON GOVT STD SAE AMS-QQ-A-200/11A REVISION NR A DTD 10/01/2014 PART PIECE NUMBER: ALLOY 7075, T6511 TEMPER
SPE8E4-26-T-2010
SECTION B
TDP Rev A Gen 1 IAW REFERENCE QAP 13873 CDRL-METALSCERT-26124 REVISION NR DTD 12/04/2025 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE NON GOVT STD NAS344 REVISION NR 1 DTD 01/01/1978 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE NON GOVT STD SAE AMS-QQ-A-200C REVISION NR C DTD 11/01/2019 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE NON GOVT STD ASTM B666/B666M-20 REVISION NR M DTD 11/01/2020 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016179309 0001 FT 80.000
NSN/MATERIAL:9540010380442
DELIVERY (IN DAYS):0042
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 10% MINUS 10%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C
UNIT CONT:10 OPI:M
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PRESERVATION ZZ = IAW ASTM B660 PACKING Z = IAW ASTM B660 MARKING IAW MIL-STD-129
ADDITIONAL MARKING REQUIREMENTS: WHEN THE CONTRACT OR ORDER REFLECTS TWO UNITS (EXAMPLE: FT-LB, LB-SH, LB-CL, ETC.) SHIPMENT MARKINGS SHALL INCLUDE THE QUANTITY OF BOTH UNITS. THIS MARKING DOES NOT APPLY FOR MATERIAL SHIPPED LOOSE.
SPE8E4-26-T-2010
SECTION B
PR: 7016179309 PRLI: 0001 CONT’D
PARCEL POST ADDRESS:
SW3113
DLA DISTRIBUTION CHERRY POINT
PHANTOM RD BLDG 147 BAY A
CHERRY POINT NC 28533-5040
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3113
DLA DISTRIBUTION CHERRY POINT
PHANTOM RD BLDG 147 BAY A
CHERRY POINT NC 28533-5040
US
Need Ship Date:09/29/2026 Original Required Delivery Date:09/10/2026
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0002 7016179309 0002 FT 17,000.000
NSN/MATERIAL:9540010380442
DELIVERY (IN DAYS):0042
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 10% MINUS 10%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C
UNIT CONT:10 OPI:M
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PRESERVATION ZZ = IAW ASTM B660 PACKING Z = IAW ASTM B660
SPE8E4-26-T-2010
SECTION B
PR: 7016179309 PRLI: 0002 CONT’D
MARKING IAW MIL-STD-129
ADDITIONAL MARKING REQUIREMENTS: WHEN THE
CONTRACT OR ORDER REFLECTS TWO UNITS
(EXAMPLE: FT-LB, LB-SH, LB-CL, ETC.)
SHIPMENT MARKINGS SHALL INCLUDE THE
QUANTITY OF BOTH UNITS. THIS MARKING
DOES NOT APPLY FOR MATERIAL SHIPPED LOOSE.
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C
UNIT CONT:10 OPI:M
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PRESERVATION ZZ = IAW ASTM B660 PACKING Z = IAW ASTM B660 MARKING IAW MIL-STD-129
ADDITIONAL MARKING REQUIREMENTS: WHEN THE CONTRACT OR ORDER REFLECTS TWO UNITS (EXAMPLE: FT-LB, LB-SH, LB-CL, ETC.) SHIPMENT MARKINGS SHALL INCLUDE THE QUANTITY OF BOTH UNITS. THIS MARKING DOES NOT APPLY FOR MATERIAL SHIPPED LOOSE.
PARCEL POST ADDRESS:
SW3122
DLA DISTRIBUTION JACKSONVILLE
BLDG 175 SWAN ROAD
JACKSONVILLE FL 32212-0103
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3122
DLA DISTRIBUTION JACKSONVILLE
BLDG 175 SWAN ROAD
RAYMOND MORGAN 904-661-5135
JACKSONVILLE FL 32212-0103
US
Need Ship Date:09/29/2026 Original Required Delivery Date:09/10/2026
SPE8E4-26-T-2010 NSN/Part Number: 9540-01-038-0442 Quantity: 80 FT Purchase Request: 7016179309QTY: 17080 Delivery: 42 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332112
New
DIBBS
Precision Machined Mounting Plate SupplyThe contract requires the manufacture and delivery of 30 precision-machined mounting plates in full compliance with military specifications covering material composition, dimensional tolerances, and mandatory marking requirements. All units must meet strict quality and performance standards dictated by defense industry norms to ensure interoperability and reliability in military vehicle systems. The work is classified as a subcontract under NAICS code 332112 and is being procured by the Department of Defense through its Land Supplier Operations Vehicle Support division. Proposals must be submitted by the deadline of August 17, 2026, with the solicitation originally posted on August 5, 2026. The place of performance and point of contact details are not specified, but all deliveries and compliance certifications are expected to align with federal defense contracting protocols and traceability requirements.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332112
New
DIBBS
Precision Machining of Centrifugal Pump ImpellerThe contract calls for the manufacture of two precision centrifugal pump impellers designed for critical applications requiring strict compliance with military or industrial specifications. This subcontract is part of the Department of Defense’s Maritime Supply Chain initiative and is classified under NAICS code 332112, indicating it falls within the precision machining and manufacturing sector for pumps and pumping equipment. The impellers must meet exacting quality and performance standards to ensure reliable operation in demanding environments, where failure is not an option. All work must be completed to stringent technical requirements without deviation, emphasizing dimensional accuracy, material integrity, and surface finish. The solicitation was posted on August 5, 2026, with a firm deadline for responses on August 12, 2026, leaving a limited window for qualified subcontractors to submit proposals. The place of performance and point of contact details are not specified, suggesting the contractor may have flexibility in location but must still meet all delivery and certification benchmarks. The contract is accessible through the DIBBS platform, and interested parties must ensure full alignment with the technical and compliance demands outlined in the full RFQ to be considered for award. There is no set-aside designation, meaning any eligible supplier may bid regardless of business size or ownership characteristics.
MARITIME SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332112
New
DIBBS
Pressure Switch Supply (NSN 5930-00-192-4507)The contract solicits the supply of five pressure switches identified by NSN 5930-00-192-4507, distributed across two contract line items, with delivery required to Fort Eustis, Virginia, under the procurement authority of the Department of Defense’s Electrical Devices Division. All items must strictly adhere to DLA technical standards, and contractors are obligated to submit a comprehensive data package if proposing any alternate parts in lieu of the specified NSN. The solicitation, posted on August 5, 2026, closes for responses on August 17, 2026, and is classified as a subcontract under NAICS code 332112, indicating manufacturing of electrical equipment and wiring supplies. No set-aside designation or point of contact information is provided, and the procurement is conducted through the DIBBS platform with the reference number SPE7M826T5710.
ELECTRICAL DEVICES DIV

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332112
New
DIBBS
BOLT, MACHINE
Solicitation # SPE4A6-26-T-13BN
The contract pertains to the procurement of 814 units of a machine bolt identified by NSN 5306-00-462-4317, classified as a commercial item and governed by established military or consensus non-government standards. The hardware must be manufactured to the current revision of the defining standard, with prior revisions still acceptable if they were current at the time of manufacture. Item Unique Identification is explicitly not required per the service customer’s request, and DFARS 252.211-7003(c)(1)(i) applies. Technical and quality requirements referenced by R or I numbers are incorporated by reference from the DLA Master List, and packaging must comply with DLA specifications. Inspection and acceptance occur at the origin, and government identification must be removed from non-accepted supplies. Measuring and test equipment standards are applicable, and physical identification of the bare item is required. The solicitation, issued under number SPE4A6-26-T-13BN, was posted on August 5, 2026, with responses due by August 13, 2026, and delivery is required within 156 days after order. The acquisition is fully competitive, under NAICS code 332112, managed by the Department of Defense’s ASC Commodities Division, with performance to be delivered to Tracy, California, 95304-5000. Primary point of contact is Priscilla Holmes.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332112
New
DIBBS
CHANNEL, STRUCTURAL
Solicitation # SPE8E4-26-T-1982
The contract specifies the procurement of structural aluminum channels made from 6061 aluminum alloy in T6 or T6511 temper, with a width of 4.0 inches, height of 1.647 inches, thickness of 0.180 inches, and a weight of 2.210 pounds per foot. Lengths must be between 20 and 30 feet and delivered in whole-foot increments only. The profile must conform to specific die numbers from approved manufacturers including Alcoa, Tiernay, Kaiser, and Reynolds. Material must meet stringent quality standards defined by ASTM B666/B666M-20, SAE AMS-QQ-A-200/8A, and SAE AMS-QQ-A-200C, and suppliers must be listed on the Qualified Suppliers List for Distributors (QSLD) to be eligible. Every shipment requires a Certificate of Quality Compliance, along with continuous identification markings on each unit that include the DLA contract number, NSN, specification revision, alloy, temper, die number, manufacturer, heat and lot numbers, and dimensions. Markings must be legible, waterproof, and applied via stamping or stenciling using non-contaminating fluids. Packaging must follow MIL-STD-2073-1E and MIL-STD-129 guidelines with preservation per ASTM B660 and palletization per DLA requirements. A minimum of 50 feet is required, with a 10% variance allowed, and delivery is FOB origin with inspection and acceptance at destination. The product is classified as a critical application item, and failure to comply with any requirement, particularly regarding supplier qualification or marking, may result in rejection or criminal penalties. The delivery deadline is 83 days from award, with an original required delivery date of September 9, 2026, and the final ship date set for November 9, 2026, to DLA District San Joaquin in Tracy, California.
DLA DIST SAN JOAQUIN

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332112
New
DIBBS
BOLT, MACHINE
Solicitation # SPE4A6-26-T-13NJ
The contract specifies the procurement of 209 machine bolts identified by NSN 5306-01-377-1546 and part number 12418102, manufactured to the current revision of a recognized military or consensus non-government part standard, with past revisions also acceptable if they were current at the time of manufacture. The item is classified as a commercial item and is designated as a critical application component requiring strict compliance with technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and attributes must be verified at designated levels with AQLs of 0.1 for critical, 1.0 for major, and 4.0 for minor. Configuration control, engineering change proposals, and variance requests are governed by specific DLA protocols including RQ002 and RQ017 for physical marking and removal of government identification from non-accepted items. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129 respectively, with no special marking required and palletization following DLA packaging standards. Delivery is FOB origin with inspection and acceptance occurring at destination, and the required delivery date is August 5, 2026, with a 182-day lead time. The item must be shipped to the DLA Distribution Center in New Cumberland, PA, and the contractor must comply with all applicable Defense Logistics Agency procedures, including proper unit of issue and transportation guidelines. Certification of conformance is authorized unless overridden by a quality assurance letter of instruction.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332112
New
DIBBS
STRUCTURAL SECTION,
Solicitation # SPE8E4-26-T-1962
The contract specifies the procurement of 31 units of a structural section made from 6061 aluminum alloy in T4 temper, extruded to a length of 12 feet with part number BAC1520-606 and national stock number 9540-01-482-2307. Each part must be marked per MIL-STD-130 with the NSN, part number, current design authority code 98748, actual manufacturer’s cage code, date of manufacture, and the phrase “FOR MILITARY USE ONLY,” explicitly prohibiting the use of Boeing’s original cage code. Packaging must comply with DLA’s RP001 requirements, and all technical and quality standards referenced are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date. The item is subject to export control under ITAR or EAR, restricting technical data disclosure to foreign persons anywhere, including U.S. subsidiaries and foreign nationals in the U.S., with DFARS 252.225-7048 enforcing compliance. Access to controlled data is limited to DLA contractors who hold JCP certification, have completed required DLA training and questionnaire, and have received formal approval. Delivery is due 167 days after award under solicitation SPE8E4-26-T-1962, issued by the Department of Defense through Depot Oklahoma at Tinker AFB, with responses due by August 17, 2026, and primary point of contact Pamela Duffey.
DEPOT OKLAHOMA

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332112
New
DIBBS
SCREW, MACHINE
Solicitation # SPE4A6-26-T-13CA
The contract is for the procurement of 230 machine screws with the NSN/Part Number 5305-00-551-6444, issued under solicitation SPE4A6-26-T-13CA by the Defense Logistics Agency’s ASC Commodities Division. Delivery is required within 80 days after delivery order, and responses must be submitted by August 13, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue date or award date depending on the acquisition size. The item is subject to several DLA-specific requirements including packaging standards, removal of government identification from non-accepted supplies, physical marking of bare items, and strict export controls. Technical data associated with this item is classified under ITAR or EAR regulations, prohibiting unauthorized export or disclosure to foreign persons, including foreign nationals within the U.S. Contractors must possess a valid US/Canada Joint Certification Program certification, have completed mandatory DLA export control training and questionnaire, and have received explicit approval from DLA to access the controlled data. The place of performance is Tinker Air Force Base, Oklahoma, and the primary point of contact is Nyjel Knowlin, reachable via email at nyjel.knowlin@dla.mil.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332112
New
DIBBS
SCREW, CAP, HEXAGON H
Solicitation # SPE4A6-26-T-13KL
The contract pertains to the procurement of hexagon head cap screws, identified by NSN 5305013308496 and part number 12414475-113, under solicitation SPE4A6-26-T-13KL, with a total quantity of 87 packaging units, each containing 50 screws, effective March 1, 2023. The item is designated as a critical application item and must conform to Technical Data Package Revision A Generation 3, aligned with multiple reference drawings dated between 2011 and 2026. All supplies must comply with DLA packaging requirements and the DLA Master List of Technical and Quality Requirements, incorporated by reference. Sampling procedures must adhere to MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise specified; critical, major, and minor attributes are assigned verification levels VII, IV, and II with corresponding AQLs of 0.1, 1.0, and 4.0. Unit of issue is PG and delivery is FOB origin within 37 days. Inspection and acceptance occur at destination, with no variance allowed in quantity. Packaging must follow MIL-STD-2073-1E and marking must comply with MIL-STD-129, with no special marking required. Palletization must meet DLA packaging standards. The contract is issued by the Department of Defense, ASC Commodities Division, with performance to be conducted in New Cumberland, PA.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332112
New
DIBBS
SCREW, CAP, HEXAGON HEAD
Solicitation # SPE4A6-26-T-53F2
The contract pertains to the procurement of eight hexagon head cap screws identified by NSN 5305-01-377-3717, with a delivery requirement of 171 days after award. The technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective on either the solicitation issue date or award date depending on the acquisition size. Packaging must comply with DLA requirements, and all items must be marked in accordance with MIL-STD-130N for U.S. military property identification. Non-accepted supplies must have government identification removed as directed, and each screw must be physically marked according to the bare item marking standard. Sampling and inspection follow MIL-STD-1916 or an equivalent zero-based plan, with acceptance criteria requiring zero non-conformances unless otherwise specified, and attributes are classified with stringent verification levels or AQLs. The use of mercury or mercury-containing compounds is strictly prohibited unless explicitly exempted for specific functional components, and any permitted mercury-containing items must include shockproof design and secondary containment as per NAVSEA guidelines. The solicitation number is SPE4A6-26-T-53F2, issued on August 5, 2026, with responses due by August 10, 2026, under the NAICS code 332112, and performance is designated for Tracy, CA, with Myonka Boyd listed as the primary point of contact.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332112
New
DIBBS
BOLT, MACHINE
Solicitation # SPE4A6-26-T-10DR
The contract pertains to the procurement of 231 machine bolts identified by NSN 5306-00-785-1102 and part number 9411631, supplied to meet technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements. The items are designated as critical application components for General Motors Corp and Rolls-Royce Solutions America Inc, requiring strict adherence to MIL-STD-1916 or ASQ H1331 sampling protocols with zero non-conformances permitted unless otherwise stated. Attributes are to be classified with verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively for critical, major, and minor characteristics. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 marking standards, with no special marking required, and palletization must conform to DLA packaging requirements. The items must be delivered FOB origin within 164 days, with no variance allowed in quantity, inspected and accepted at destination. The delivery address is DLA Distribution Depot Hill at Hill AFB, Utah, with freight shipping instructions referencing DLAD procedural notes C19 and C20. The original required delivery date is January 27, 2027, with a need ship date of January 17, 2027. The contract, issued under solicitation SPE4A6-26-T-10DR, was posted on July 28, 2026, with responses due by August 5, 2026. It falls under NAICS code 332112 and is managed by the Department of Defense’s ASC Commodities Division. The unit of issue is each, with a total price of $231.00 at $1.00 per unit. Technical compliance, packaging, marking, and delivery protocols are binding and must align with all referenced DLA and military standards without exception.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332112
New
DIBBS
BAR, METAL
Solicitation # SPE8E4-26-T-2015
This contract specifies the procurement of extruded aluminum alloy bars made from 6061 in the T6511 temper condition, with a diameter of 1.500 inches and a total length of 12 feet per bar, weighing approximately 2.080 pounds per foot. The material must meet stringent technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements and must comply with multiple specifications including SAE AMS-QQ-A-200/8A, ASTM B666/B666M-20, ASTM B660-23, and MIL-STD-129R. A Certificate of Quality Compliance, including mill material certification, is mandatory for every shipment and must be submitted to the DLA Troop Support Contracting Officer. Each bar must be continuously marked with the DLA contract order number, NSN, specification revision, alloy and temper, manufacturer’s name, heat and lot number, and dimensions using approved methods such as stenciling or stamping, ensuring legibility and durability without contamination. All bars must be supplied in whole-foot increments within the specified length tolerance. The supplier must be listed on the Qualified Suppliers List for Distributors (QSLD), and only approved QSLD distributors are eligible for award unless a formal deviation is declared. Non-compliance with the QSLD requirement constitutes an unauthorized substitution and may result in criminal penalties. Packaging and preservation must adhere to MIL-STD-2073-1E and ASTM B660, with labeling fully conforming to MIL-STD-129, including special marking code ZZ for preservation and marking. Palletization follows DLA packaging requirements. The contract specifies delivery of 298 feet to Tinker AFB, Oklahoma, under FOB origin terms with a 10% variance allowance, inspection and acceptance at destination, and an original delivery deadline of January 9, 2027, with a required ship date of January 18, 2027. This item is designated as a critical application item, and all documentation, including CDRL-METALSCERT, must be provided as required under the contract data requirements list.
DEPOT OKLAHOMA

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → CHERRY POINT PHANTOM RD BLDG

Same awarding agency

NAICS: 326299
New
DIBBS
Cellular Rubber Sheet Manufacturing & SupplyThe contract requires the manufacture and supply of cellular rubber sheeting at a thickness of 1/16 inch, specifically designed to be asbestos-free and compliant with the SAE AMS3195H specification. The material must also adhere to military packaging and marking standards to ensure proper handling, identification, and logistics integration within defense supply chains. The product is intended for use in applications where consistent physical properties, durability, and safety are critical, and the absence of asbestos ensures compliance with current health and environmental regulations. The solicitation is issued as a subcontract under the NAICS code 326299 for other rubber product manufacturing, and the place of performance is tied to Cherry Point, North Carolina with a zip code of 28533-5040. The opportunity was posted on August 5, 2026, and responses are due by August 17, 2026, providing potential suppliers with a twelve-day window to submit proposals. The sponsoring agency is part of the Department of Defense, operating under the Cherry Point Phantom Rd Bldg designation, indicating this requirement is part of a broader military logistics or maintenance initiative. Full details and submission guidelines are accessible via the provided DIBBS portal link.
All Other Rubber Product Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541611
New
DIBBS
Small Business Subcontracting Support (Optional)The contract seeks consulting and administrative support services to assist small business representation and ensure compliance with subcontracting requirements specified under clause 52.219-28, focusing on Women-Owned Small Business set-aside obligations. Services will include guidance on meeting federal subcontracting goals, maintaining accurate documentation, and facilitating communication between prime contractors and eligible small business subcontractors to uphold regulatory standards. The work is intended to enhance accountability and transparency in the allocation of subcontracting opportunities to certified WOSB firms. Performance is required at Cherry Point, North Carolina, with a zip code of 28533-5040, under the jurisdiction of the Department of Defense through the Cherry Point Phantom Road Building office. This is a subcontract opportunity with a NAICS code of 541611, indicating management consulting services, and is exclusively available to Women-Owned Small Businesses. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026, with no solicitation number provided, but further details can be accessed through the designated DIBBS portal link.
Administrative Management and General Management Consulting Services

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 561910
New
DIBBS
Military-Compliant Packaging and Bar-Coding ServicesThe contract requires the provision of packaging and bar-coding services for metal sheets that strictly adhere to MIL-STD-129 standards to ensure full compliance with military logistics requirements. This includes implementing unit-level identification through barcoding to enable automated tracking and handling throughout the supply chain, while also ensuring secure transit protection to prevent damage or tampering during transport. All packaging must be designed to withstand the rigors of military transportation and support seamless integration into automated logistics systems used by the Department of Defense. This is a subcontract opportunity set aside exclusively for Women-Owned Small Businesses under the WOSB program, with the North American Industry Classification System code 561910 indicating it falls under Other Support Activities for Transportation. The solicitation was posted on August 5, 2026, with a response deadline of August 17, 2026. Performance of the contract will be centered at Cherry Point, North Carolina, with a ZIP code of 28533-5040, and the work is being managed by a Department of Defense entity identified as CHERRY POINT PHANTOM RD BLDG. Interested parties must submit their proposals through the DIBBS portal using the provided link before the deadline to be considered.
Packaging and Labeling Services

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541380
New
DIBBS
Hazardous Materials Compliance & Labeling ServicesThe contract seeks specialized labeling services for hazardous materials that must comply with both OSHA’s Hazard Communication Standard and MIL-STD-129 requirements, ensuring all labels are durable, waterproof, and contain complete identification and handling information necessary for safe storage, transport, and use. The work involves the production and application of compliant labels across defense-related hazardous materials, with strict adherence to regulatory standards for content, durability, and legibility under harsh environmental conditions. This is a subcontract opportunity set aside exclusively for Women-Owned Small Businesses under NAICS code 541380, with a response deadline of August 17, 2026. Performance will be centered at Cherry Point, North Carolina, though the exact physical location within the facility is not specified. The contract is administered by the Department of Defense under the Cherry Point Phantom Rd Bldg designation, and interested parties must submit proposals through the DIBBS portal at the provided link to be considered.
Testing Laboratories and Services

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 331111
New
DIBBS
Corrosion-Resistant Metal Sheet ManufacturingThe contract involves the manufacture of solution heat-treated iron alloy metal sheets designed for high corrosion and heat resistance, with stringent dimensional tolerances and full certification compliance required. The material must meet exact technical specifications to ensure performance under demanding environmental conditions, and all production processes must be documented and verified to satisfy quality assurance standards. This is a subcontract opportunity set aside exclusively for Women-Owned Small Businesses under the WOSB program, with the North American Industry Classification System code 331111 indicating primary focus on iron and steel mill and ferroalloy manufacturing. The solicitation was posted on August 5, 2026, with a response deadline of August 17, 2026, and the place of performance is designated as Cherry Point, North Carolina, with ZIP code 28533-5040. The contracting entity is the Department of Defense through the CHERRY POINT PHANTOM RD BLDG office, and the full details can be accessed via the provided DIBBS link. Bidders must be certified as WOSB and demonstrate the capability to produce alloy sheets with specified thermal and corrosion-resistant properties while adhering to all certification and delivery timelines.
Iron and Steel Mills

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
PLATE, IDENTIFICATION
Solicitation # SPE8E6-26-T-3987
The contract specifies the procurement of a single identification plate for a 3-way 2-position solenoid-operated hydraulic valve rated at 3000 psi continuous duty with 28 volts DC, part number 882, manufactured by Hydro-Aire Aerospace Corp. The plate is to be made of aluminum alloy QQ-A-250/1, alloy 1100, fully anodized with natural-colored inscription on a black background conforming to FED-STD-595, 37038. It features a rectangular shape with a slit tab, measuring 3.660 inches in width, 0.820 inches in length, and 0.012 inches in thickness, and is to be attached via a hole. The item is identified by NSN 9905-00-001-7003 and is to be delivered in a quantity of 19 units, with a unit price of $19.00 totaling $361.00. The plate must comply with all technical and quality requirements from the DLA Master List of Technical and Quality Requirements, which override any conflicting standards. Packaging must adhere to ASTM D3951 and MIL-STD-129 labeling and marking requirements, with palletization following DLA’s RP001 packaging guidelines. Delivery is required FOB origin within 120 days of award, with inspection and acceptance occurring at the destination. The item must be shipped by December 16, 2026, to meet the original delivery deadline of March 7, 2027. The delivery location is DLA Distribution Cherry Point, Phantom Rd Building 147, Bay A, Cherry Point, NC 28533-5040. The solicitation number is SPE8E6-26-T-3987, issued on August 5, 2026, with responses due by August 17, 2026. The contract includes a zero variance on quantity, and all packaging and marking must reflect the specified Unit of Issue and Quantity per Unit Pack. Transportation and freight details are governed by DLAD procedural notes C19 and C20. All technical specifications, including material, surface treatment, dimensions, and color, are binding and must be strictly followed per the referenced DLA standards.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332112
New
DIBBS
BAR, METAL
Solicitation # SPE8E4-26-T-1999
This contract specifies the procurement of aluminum alloy 7075 in T-73 temper, cold finished drawn or rolled, in round bar form with a diameter of 3.000 inches and lengths between 10 and 12 feet in whole-foot increments, weighing approximately 8.305 pounds per foot. The material must fully comply with technical standards including SAE AMS-QQ-A-225/9A, ASTM B666/B666M-20, ASTM B660-23, and MIL-STD-129R, and requires a Certificate of Quality Compliance with every shipment, supplied to both the customer and the DLA Troop Support Contracting Officer. All units must be permanently marked with the DLA contract number, NSN, specification revision, alloy and temper, manufacturer’s name, heat and lot numbers, and dimensions using stamping or stenciling methods that are legible, waterproof, and non-contaminating; adhesive labels are required for bars under 0.250 inches OD. Packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements, with preservation methods following ASTM B660 and marking in conformance with MIL-STD-129. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible to bid, and any deviation from this requirement must be explicitly stated, with non-compliant offers treated as exceptions subject to potential criminal penalties. Source inspection is waived for QSLD-compliant suppliers under this solicitation, and quality conformance inspections referenced in other clauses do not apply. The material is designated as a critical application item, and continuous identification markings are mandatory. The contract is for 62 feet delivered FOB origin to Cherry Point, North Carolina, with a delivery window of 153 days and a permitted quantity variance of plus or minus 10 percent. The contract number is SPE8E4-26-T-1999, with a response deadline in August 2026 and a required delivery date of November 18, 2026, with a need ship date of January 18, 2027.
Nonferrous Forging

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 331110
New
DIBBS
ANGLE, STRUCTURAL
Solicitation # SPE8E4-26-T-1974
This contract specifies the procurement of structural aluminum alloy angles made from 7075/T-6511 alloy, measuring 1.75 inches in height and width with a thickness of 0.125 inches, and supplied in 12-foot lengths at a reference weight of 0.520 pounds per foot. The total quantity required is 116 feet, to be delivered within 56 days to the DLA Distribution Cherry Point facility in North Carolina, with delivery terms FOB origin and a permissible quantity variance of plus or minus 10 percent. The material must comply with stringent technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, including full metallurgical certification and a Certificate of Quality Compliance with each shipment. Continuous identification markings are mandatory on every unit, including the DLA contract delivery order number, NSN, specification revision, alloy and temper designation, manufacturer’s name, heat and lot numbers, and dimensions, all applied via stamping or stenciling using waterproof, non-contaminating inks that remain legible after handling. The supplier must be listed on the Qualified Suppliers List for Distributors (QSLD), and any deviation from this requirement constitutes an exception that must be explicitly declared. The product must conform to specifications SAE AMS-QQ-A-200C and ASTM B666/B666M-20, and the Technical Data Package references CDRL-METALSCERT for material certification. Packaging must adhere to MIL-STD-2073-1E and ASTM B660, with Level A preservation requirements and marking in accordance with MIL-STD-129. Additional marking instructions require both units of measure to be displayed on shipment labels when applicable. All markings must be durable, waterproof, and free from adverse effects on material performance. The item is designated as a critical application item, and failure to meet any requirement—including improper qualification, marking, or certification—will result in rejection. The contract references DLA procedural notes for transportation and includes specific delivery, inspection, and acceptance points, with the final delivery deadline set for October 19, 2026.
Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326299
New
DIBBS
RUBBER SHEET, CELLUL
Solicitation # SPE8E6-26-T-3988
The contract pertains to the procurement of rubber sheet, cellular, with specific technical and quality requirements outlined under NSN 9320-00-069-5176. The material must be 1/16 inch thick, 36 inches wide, and 36 inches long, with a smooth finish on both sides, and strictly prohibits the use of asbestos as defined in FED-STD-313. An exception to AMS 3195 Revision C allows the low temperature brittleness test to replace the compression deflection at low temperature test. The specification references the DLA Master List of Technical and Quality Requirements for additional technical and quality criteria identified by R or I numbers, with applicable revisions controlled by the solicitation or award date depending on acquisition size. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, and unspecified attributes are deemed major. Zero non-conformances are required in sampling unless otherwise stated. Government identification must be removed from non-accepted supplies. The item is procured as fully competitive under a federal specification. Forty-eight units are required under purchase request 7017758593, with delivery due within 63 days of award. The solicitation, issued under SPE8E6-26-T-3988, opened on August 5, 2026, with responses due by August 17, 2026, and is managed by the Department of Defense through the Cherry Point location, with Christopher Barraro as the primary point of contact.
All Other Rubber Product Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 331110
New
DIBBS
SHEET, METAL
Solicitation # SPE8E4-26-T-1960
This contract specifies the procurement of 9 sheets of hot or cold rolled iron alloy metal, 0.063 inches thick, 36 inches wide, and 120 inches long, weighing approximately 95.256 pounds per sheet, all of which must be solution heat treated and corrosion and heat resistant. The material must meet exact dimensional requirements with no tolerance for test coupons, and lengths must be in whole feet increments only. Each sheet must be permanently and legibly marked with the DLA contract delivery order number, NSN, specification revision, alloy and temper details, manufacturer’s name, heat and lot number, and dimensions using approved methods such as stamping or stenciling; adhesive labels are required for smaller bars, tubes, and shapes under 0.250 inches in nominal diameter. A Certificate of Quality Compliance, also known as a mill-material certification, must accompany every shipment and be submitted to the DLA Troop Support Contracting Officer. The material must be packaged per MIL-STD-2073-1E and marked in accordance with MIL-STD-129, with preservation methods following ASTM A700 and packaging codes Z and ZZ as defined. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible to bid, and any non-compliance constitutes an unauthorized substitution with potential criminal penalties. The solicitation is a Women-Owned Small Business Set-Aside under NAICS code 331110, with a response deadline of August 17, 2026, and delivery required within 167 days to Cherry Point, NC. The contract incorporates technical and quality requirements from the DLA Master List and references SAE AMS5536R and AMS2807C standards, with a CDRL-METALSCERT required for material certification. No variations in quantity are permitted, inspections occur at the destination, and full compliance with packaging, marking, and shipping rules under IP083 and RP001 is mandatory. Failure to meet any of these stipulations will result in rejection of the product.
Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 484121
New
DIBBS
Transportation and Logistics for Government DeliveriesThe contract requires the arrangement and execution of transportation services for valve seats to a designated destination in compliance with DLAD PROC NOTES C19 and C20, as well as all applicable Federal Acquisition Regulation and Defense Federal Acquisition Regulation Supplement transportation requirements. The work must be performed in strict adherence to federal logistics and procurement standards, ensuring secure, timely, and fully documented delivery of sensitive components under government oversight. The place of performance is specified as Cherry Point, North Carolina, with a zip code of 28533-5040. This subcontract is categorized under NAICS code 484121, which corresponds to truck transportation for freight and materials, and is managed by the Department of Defense under the agency name CHERRY POINT PHANTOM RD BLDG. The solicitation was posted on August 4, 2026, with a response deadline of August 17, 2026. All bidders must be prepared to meet federal transportation compliance standards and demonstrate capability to handle government-restricted freight, with no set-aside provisions indicated. The official solicitation can be accessed via the provided DIBBS link for full submission details.
General Freight Trucking, Long-Distance, Truckload

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance and CMMC Self-Assessment SupportThe contract supports the prime contractor in preparing and validating a Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment for submission to the Supplier Performance Risk System (SPRS). This effort is critical to ensure compliance with DoD cybersecurity requirements for handling controlled unclassified information and must be completed in alignment with CMMC framework standards. The subcontractor will assist in documenting policies, procedures, and controls, conducting gap analyses, gathering evidence, and finalizing the self-assessment to meet federal compliance benchmarks. Work under this contract is performance-based and focused on timely delivery of an accurate, auditable self-assessment that satisfies SPRS submission criteria. The place of performance is identified as Cherry Point, North Carolina, with a response deadline of August 17, 2026, and the solicitation falls under NAICS code 541512 for Computer Systems Design Services. This subcontract supports a broader DoD objective to strengthen the supply chain’s cybersecurity posture and is part of an ongoing effort to enforce CMMC readiness across defense contractors.
Computer Systems Design Services

POSTED

1 day ago

DEADLINE

in 11 days
View Details