Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

BOLT, MACHINE

Active
SPE4A6-26-T-10DRFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of 231 machine bolts identified by NSN 5306-00-785-1102 and part number 9411631, supplied to meet technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements. The items are designated as critical application components for General Motors Corp and Rolls-Royce Solutions America Inc, requiring strict adherence to MIL-STD-1916 or ASQ H1331 sampling protocols with zero non-conformances permitted unless otherwise stated. Attributes are to be classified with verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively for critical, major, and minor characteristics. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 marking standards, with no special marking required, and palletization must conform to DLA packaging requirements. The items must be delivered FOB origin within 164 days, with no variance allowed in quantity, inspected and accepted at destination. The delivery address is DLA Distribution Depot Hill at Hill AFB, Utah, with freight shipping instructions referencing DLAD procedural notes C19 and C20. The original required delivery date is January 27, 2027, with a need ship date of January 17, 2027. The contract, issued under solicitation SPE4A6-26-T-10DR, was posted on July 28, 2026, with responses due by August 5, 2026. It falls under NAICS code 332112 and is managed by the Department of Defense’s ASC Commodities Division. The unit of issue is each, with a total price of $231.00 at $1.00 per unit. Technical compliance, packaging, marking, and delivery protocols are binding and must align with all referenced DLA and military standards without exception.

General Info

231 machine bolts, critical for GM and Rolls-Royce, must meet strict MIL-STD and DLA standards, delivered FOB origin by Jan 27, 2027.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332112 - Nonferrous ForgingView NAICS

Place of Performance

7537 WARDLEIGH RD, HILL AFB, UT, 84056-5734, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A6-26-T-10DR DLA Aviation ASC Commodities Division

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
TARIK CABALLERO
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BOLT,MACHINE
BOLT,MACHINE
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
CRITICAL APPLICATION ITEM
GENERAL MOTORS CORP 24617 P/N 9411631
ROLLS-ROYCE SOLUTIONS AMERICA INC 72582 P/N 9411631
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017572031 0001 EA 231.000
SPE4A6-26-T-10DR
SECTION B
PR: 7017572031 PRLI: 0001 CONT’D
NSN/MATERIAL:5306007851102
DELIVERY (IN DAYS):0164
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:BD OPI:O
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3210
DLA DISTRIBUTION DEPOT HILL
7537 WARDLEIGH RD
HILL AFB UT 84056-5734
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3210
DLA DISTRIBUTION DEPOT HILL
DDHU CML 385-519-8103
7537 WARDLEIGH RD BLDG 849W
HILL AFB UT 84056-5734
US
Need Ship Date:01/17/2027 Original Required Delivery Date:01/27/2027
SPE4A6-26-T-10DR NSN/Part Number: 5306-00-785-1102 Quantity: 231 EA Purchase Request: 7017572031QTY: 231 Delivery: 164 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332112
New
DIBBS
BOLT, MACHINEThe contract solicitation SPE4A6-26-T-07ZR seeks the procurement of 2,454 machined bolts, NSN 5306001775559, identified as MS9530-10, manufactured to Technical Data Package Rev A Gen 1 in compliance with SAE AS9530B Revision B dated 08/01/2015, SAE AS7452 Revision D dated 07/01/2021, and Quality Assurance Procedure QAP 13873 Revision D dated 03/12/2019. The item is designated a critical application requiring full traceability, inspection certification, and adherence to stringent military and aerospace standards. Delivery is required FOB Origin to Warner Robins Air Force Base, Georgia, with a 293-day delivery window following the need ship date of May 18, 2027, and an original delivery deadline of November 20, 2027. Quantity is fixed at 2,454 units with zero variance allowed, and inspection and acceptance occur at the origin. Packaging must adhere to ASTM D3951, but DLA’s Master List of Technical and Quality Requirements takes precedence, and all packaging and labeling must follow MIL-STD-129 including 2D barcode requirements and proper unit of issue and quantity per unit pack as specified. Palletization must conform to DLA RP001 standards. All hazardous materials must be labeled per OSHA Hazard Communication Standard and require submission of Safety Data Sheets; federal exemptions apply only if explicitly identified. The contract mandates compliance with multiple FAR clauses including Equal Opportunity for Workers with Disabilities, Combating Trafficking in Persons, Employment Eligibility Verification, Sustainable Products, Hazardous Materials Identification, Safeguarding of Contractor Information Systems, and Changes – Fixed Price, all subject to Deviation 2026-00038. Authorization and Consent clauses include both Alternate I and Alternate II versions. Invoicing must be conducted exclusively through Wide Area WorkFlow, and the offeror must provide a Unique Entity ID and CAGE Code, especially if offering under small business set-asides such as HUBZone, 8(a), SDVOSB, WOSB, or EDWOSB. Offerors must affirm their size status and disclose joint venture partners’ UEIs if applicable, and
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 2 days
View Details
NAICS: 332112
New
DIBBS
HEAT INTERCHANGER, RThe contract is for one Heat Interchanger, R, with NSN 4130-01-612-2728 and part number 026-4376-000, supplied by JOHNSON CONTROLS NAVY SYSTEMS, LLC. Delivery is required within 20 days to the USS RONALD REAGAN CVN 76 at FPO AP 96616, with delivery terms FOB destination and no tolerance for quantity variance. All items must comply with DLA packaging requirements as defined in RP001 and marking standards per MIL-STD-129, using packaging methods specified under MIL-STD-2073-1E, including preservation, packaging, and container codes. The item must be shipped in a single unit with intermediate containment labeled D3 and packaged without special marking. Mercury and mercury-containing compounds are strictly prohibited unless explicitly exempted for functional uses in batteries, lighting, instruments, sensors, controls, weapon systems, or authorized chemical reagents, and any portable devices containing mercury must include shock-proof design and a secondary containment barrier per NAVSEA 5100-003D. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements identified by R or I numbers, with compliance determined by the master list revision effective on the solicitation issuance date. Transportation and shipping procedures must adhere to DLAD Proc Notes C19 and C20, and the purchase request number is 7017643732 under contract SPE8E8-26-T-4870. Inspection and acceptance occur at the destination, and the required delivery date is July 24, 2026.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 332112
New
DIBBS
BOLT, MACHINEThe contract pertains to the procurement of 706 units of a machine bolt identified by NSN 5306-99-138-3093 and part number 7980-1302-017, with deliveries required within 116 days under FOB origin terms. The item is designated as a critical application component, subject to stringent technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, which supersede all other specifications including ASTM D3951. Packaging must comply with MIL-STD-129 and RP001 DLA Packaging Requirements, with all items marked and labeled accordingly, and palletization following DLA specifications. Sampling for quality assurance is to be conducted using MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan, with acceptance criteria requiring zero non-conformances unless otherwise specified. Attributes are classified with verification levels VII, IV, and II for critical, major, and minor characteristics respectively, or equivalent AQLs, and unspecifed attributes default to major. The contract mandates adherence to documentation standards including source approval requirements and physical identification markings, with all components sourced from approved suppliers including Goodrich Control Systems Ltd, Safran Electrical & Power UK Ltd, and Advanced Logistics for Aerospace (UK). Delivery is directed to DLA Distribution at the New Cumberland, Pennsylvania facility, with no quantity variance allowed and inspection and acceptance occurring at destination. The solicitation was issued on July 28, 2026, with responses due by July 31, 2026, under contract number SPE4A6-26-T-83M0, procured by the Department of Defense’s ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 2 days
View Details
NAICS: 332112
New
DIBBS
BOLT, MACHINEThe contract pertains to the procurement of 500 machine bolts identified by NSN 5306-00-054-1438 under solicitation SPE4A7-26-T-583F, with delivery required within 158 days after receipt of order by June 1, 2026. The item is classified as a commercial item and must be manufactured in accordance with the current revision of SAE AS9566 Revision B dated July 1, 2018, with prior revisions accepted for items produced before the solicitation date. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with specific provisions including RQ006 for quality conformance inspection, RQ009 for inspection and acceptance at origin, RQ011 for removal of government identification from non-accepted supplies, and RQ017 mandating physical identification markings on bare items consistent with MIL-STD-130N paragraph 4.1.b(2). Mercury and mercury-containing compounds are prohibited from intentional addition or direct contact with hardware except for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA; portable fluorescent lamps and instruments containing mercury must be shockproof and have a secondary containment boundary per NAVSEA 5100-003D. Packaging must comply with MIL-STD-2073-1E using preservation method 10, green bag wrapping, no cushioning material, unit containers marked BL, intermediate containers E5, and a pack code of U. Palletization adheres to DLA Packaging Requirements for Procurement (RP001). Marking is governed by MIL-STD-129, with no special marking required. Sampling for acceptance follows MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and critical, major, and minor attributes must be evaluated at verification levels VII, IV, and II respectively, or corresponding AQLs of 0.1, 1.0, and 4.0. Inspection and acceptance occur at origin under contractor responsibility, with Certificate of Quality Compliance required. The contract prohibits hexavalent chromium and requires hazardous material labeling in compliance with 29 CFR 1910.1200. It includes compliance clauses
ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 2 days
View Details
NAICS: 332112
New
DIBBS
CONDENSER, REFRIGERAThe contract pertains to the procurement of one condenser for refrigeration equipment with NSN 4130-01-583-8050 and part number 891-14230, issued under solicitation SPE8E8-26-T-4891 by the Defense Logistics Agency. The item must be delivered within five days to the Sierra Army Depot in Herlong, California, with delivery terms FOB origin and no variance allowed in quantity. Inspection and acceptance occur at the destination, and all packaging must comply with ASTM D3951 and MIL-STD-129 as dictated by the DLA Master List of Technical and Quality Requirements, which takes precedence over any general standards. The unit of issue is each, and palletization must adhere to DLA packaging directives. The shipment must use the fastest traceable means, excluding parcel post, and must be marked with the designated government information including the mail forward code, project identifier, and required delivery date of November 24, 2025. The contract references strict government control over identification, handling, and documentation, with specific instructions for labeling and shipping to the designated depot facility.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 332112
New
Federal
Precision Aerospace Casting (Aluminum)The contract entails the precision manufacturing of a control exhaust nozzle using aluminum casting methods, with full responsibility for mold design, casting, finishing, and dimensional verification to meet the specifications outlined in Source Control Drawing 4083931. All work must adhere to stringent aerospace quality standards, ensuring the final component meets exacting functional and dimensional tolerances required for critical aerospace applications. The scope covers the entire production lifecycle from initial tooling through final inspection, with no room for deviation from the approved technical documentation. This is a subcontract issued under the NAICS code 332112 for aluminum foundry operations, sponsored by the Department of Defense through the FA8121 Afsc Pzaaa office. The solicitation was posted on July 28, 2026, with a firm response deadline of August 12, 2026, at 5:00 PM, leaving a limited window for qualified vendors to submit proposals. Performance location details are unspecified, and no set-aside designation or point of contact information is provided, suggesting that eligible contractors must independently verify all operational and compliance requirements prior to bidding. All work must be completed in accordance with Defense Department procurement protocols and aerospace industry best practices.
FA8121 Afsc Pzaaa

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 332112
New
DIBBS
BOLT, MACHINEThe contract is for the procurement of 6,106 machine bolts with NSN 5306-00-097-8968 under solicitation SPE4A6-26-T-03RG, issued by the Defense Logistics Agency’s ASC Commodities Division. Delivery is required within 158 days after order award, with responses due by July 30, 2026. The item falls under NAICS code 332112 and is subject to a comprehensive set of technical, quality, and regulatory requirements. These include compliance with DLA’s Master List of Technical and Quality Requirements identified by R and I numbers, such as packaging standards, inspection protocols at origin, removal of government identification from non-accepted items, and cybersecurity certification at CMMC Level 2. The technical data associated with this item is export-controlled under ITAR or EAR, restricting its disclosure to foreign persons regardless of location, and access is limited to contractors with approved JCP certification, completed DOD export control training, and formal DLA authorization. Additionally, the contract mandates tailored higher-level quality requirements for both manufacturers and non-manufacturers, requires physical marking of the bare item, and applies Covered Defense Information protocols under DFARS 252.225-7048. Performance is to be delivered to New Cumberland, PA, with Duane Watkins as the primary point of contact.
ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in about 21 hours
View Details
NAICS: 332112
New
DIBBS
BEAM, ACCESS DOORThe contract pertains to the procurement of three BEAM ACCESS DOOR units with part number 12488266 under solicitation SPE7L3-26-T-135A, issued by the Department of Defense through DLA for the U.S. Army. Delivery is required within ten days of award, with shipment FOB origin and no variance allowed in quantity. The item must comply with MIL-STD-130N for identification marking and MIL-STD-129 for packaging, adhering to special packaging instructions AK15368022 Rev A and special marking requirements including “ARROW UP OPEN THIS SIDE” and mechanical handling directives. Preservation and packaging are strictly prohibited from containing mercury or mercury compounds. The product is defined by multiple Army drawings and referenced technical data packages, with chemical agent resistant coatings (CARC) mandated per DCSC Drawing 16236 CS-2300-0001 superseding any conflicting finish requirements. Ozone-depleting chemicals are forbidden, and substitute chemicals require prior approval. The supplier must be a CMMC Level 2 Certified Third-Party Assessment Organization, and all configuration changes require formal engineering change proposals. Quality compliance is governed by Certificate of Conformance procedures unless waived by a quality assurance letter. The item is sourced under full and open competition, with performance directed to Zaczernie, Poland, under RDD/ANMCS shipping protocols and specific transportation guidance outlined in DLAD procedural notes. The required delivery date is July 22, 2026, with a solicitation response deadline of August 7, 2026, and point of contact is Lee Miller.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 332112
New
DIBBS
STARTER, MOTORThe contract solicits a single motor starter with NSN 6110-01-137-1923 under a Total Small Business Set-Aside, requiring offerors to be registered in the System for Award Management and certified as small businesses under NAICS code 332112. The item must be delivered within five days of award to FPO AP 96675, shipped FOB Origin via the fastest traceable means, with vessel transport subject to DLA procedural notes C19 and C20. Technical and quality requirements are defined by the DLA Master List of Technical and Quality Requirements, with packaging and marking fully compliant with MIL-STD-2073-1E and MIL-STD-129, including specific preservation methods and unit container standards. Sampling for acceptance must follow MIL-STD-1916, ASQ H1331 Table 1, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Zero non-conformances are required in any sampled lot unless otherwise stated, and MIL-STD-105/ASQ Z1.4 may be used only for determining sample size, not acceptance criteria. Mercury or mercury-containing compounds are prohibited except in specified exceptions such as batteries, fluorescent lamps, and certain instruments, with portable devices requiring double containment per NAVSEA 5100-003D. Hazardous materials must be labeled in accordance with 29 CFR 1910.1200 and MIL-STD-129, and the contract includes mandatory clauses on cyber security, whistleblower rights, trafficking in persons, employment eligibility verification, and prohibitions on covered telecommunications equipment. Payment requires submission of invoice and receiving report through Wide Area Workflow, and the contractor must comply with all applicable DFARS and FAR clauses, including those related to safety notifications, government delay of work, and restrictions on mandatory arbitration. All representations and certifications must be actively maintained in SAM, and updates to size or socioeconomic status are required within 30 days of contract modifications or novation agreements.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

2 days ago

DEADLINE

in about 21 hours
View Details
NAICS: 332112
New
DIBBS
CONNECTOR, RECEPTACLThe contract specifies the procurement of a single electrical connector receptacle identified by NSN 5935-01-365-0486 and part number D38999/40WJ24SA, requiring strict compliance with MIL-DTL-38999/40B and MIL-DTL-38999N standards. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with specific mandates for qualified product list adherence under procurement note H01, prohibitions against ozone-depleting substances in manufacturing unless explicitly approved, and mandatory traceability documentation to verify manufacturing dates and sources. Items produced by Amphenol, Matrix, or Pyle National between July 2006 and June 2016 are explicitly rejected regardless of condition. Sampling must follow MIL-STD-1916 or ASQ H1331, with zero non-conformances required unless otherwise stated, and inspection is designated at destination with no variance allowed in quantity. Packaging must adhere to MIL-STD-129 and DLA packaging requirements, with non-hazardous items packaged per ASTM D3951 only if not superseded by higher DLA standards. Delivery is FOB origin with a five-day lead time, and shipping must use the fastest traceable means with parcel post prohibited. The item is to be delivered to Letterkenny Army Depot in Chambersburg, PA, with the required delivery date set for July 24, 2026.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 332112
New
DIBBS
BAR, METALThe contract specifies the procurement of extruded aluminum alloy 7075 in T6 temper, formatted as flat bar with a thickness of 2.500 inches, width of 4.000 inches, and lengths between 10 and 12 feet in whole-foot increments only, with a reference weight of 12.100 pounds per foot. The material must fully comply with technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, including SAE AMS-QQ-A-200/11A, ASTM B666/B666M-20, ASTM B660-23, and MIL-STD-129R. Each unit must carry continuous identification markings including the DLA contract delivery order number, NSN, specification revision, alloy and temper, manufacturer’s name, heat and lot numbers, and dimensions, applied via stamping or stenciling that is legible, waterproof, and non-contaminating. Adhesive labels are required for bars under 0.250 inches nominal OD, and tags for wire. A Certificate of Quality Compliance must accompany every shipment and be forwarded to the DLA Troop Support Contracting Officer. This procurement is subject to the Qualified Suppliers List for Distributors requirement, limiting eligibility to suppliers explicitly listed on the QSLD; any deviation must be clearly indicated, and non-compliance may result in rejection, penalties, or criminal liability. Source inspection is waived for QSLD-compliant suppliers, and CDRL-METALSCERT certification is mandatory. Packaging must adhere to MIL-STD-2073-1E with preservation per ASTM B660 and marking per MIL-STD-129. The items are to be delivered FOB origin in 135 days, with a total quantity of 68 feet at $68.00 per foot under solicitation SPE8E4-26-T-1930. A 10% quantity variance is permitted. Critical application status applies, and delivery is to Robins AFB, Georgia, with a required ship date of December 21, 2026, and original delivery due January 3, 2027. All shipments must include dual-unit markings when applicable, and palletization must follow DLA packaging requirements.
WARNER ROBINS

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 332112
New
DIBBS
CONNECTOR, PLUG, ELECTRIThis contract specifies the procurement of a plug-type electrical connector identified by part number D38999/26WB35SN and NSN 5935011907609, governed by military specification MIL-DTL-38999/26G and MIL-DTL-38999N, with mandatory compliance to technical and quality standards outlined in the DLA Master List. The item is classified as a qualified product requiring adherence to the Qualified Products List for Federal Stock Class 5935, and material produced by Amphenol, Matrix, or Pyle National between July 2006 and June 2016 is strictly prohibited. Additionally, material manufactured by Bendix Corporation with lot codes from January 1977 through February 1984 is unacceptable. Mercury or mercury-containing compounds are explicitly banned from use or contact with the hardware, except for specific functional applications such as batteries, instruments, or weapon systems as allowed under Navsea guidelines, and any portable devices containing mercury must include a secondary containment and be shockproof. The contract awards two separate lines: 45 units at $45.00 each for delivery to Tinker AFB, Oklahoma, and 594 units at $549.00 each for delivery to Robins AFB, Georgia, with a total order quantity of 639 units. All deliveries must comply with MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements, with no special marking needed. Full and open competition applies, and quantities are fixed with zero variance allowed. Inspection and acceptance occur at destination, with delivery required within 92 days of award. The original required delivery date is March 31, 2027, but shipments must be initiated by July 4, 2027, for the Oklahoma shipment and November 8, 2026, for the Georgia shipment. Packaging, shipping, and hazardous material handling follow DLA procedural notes, and traceability verification may be demanded to confirm manufacturing dates and origins. The contract was issued under solicitation SPE7M5-26-T-354V, with a response deadline of August 7, 2026, and is managed by the Department of Defense's Active Devices Division.
ACTIVE DEVICES DIVISION

POSTED

2 days ago

DEADLINE

in 9 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 484220
New
DIBBS
Domestic Logistics & Delivery CoordinationThe contract requires coordinated execution of final delivery for cable assemblies to multiple domestic military stock locations, with strict adherence to packaging verification standards and shipping instruction compliance. All activities must ensure that cable assemblies are handled, packaged, and transported according to military requirements to guarantee readiness and operational suitability upon arrival at designated depots across CONUS. The solicitation is a small business set-aside under the SBA program, exclusively open to total small businesses as defined by FAR 19.5, with the NAICS code 484220 classifying it under truck transportation of specialized freight. The contract is managed by the ASC Commodities Division under the Department of Defense and is issued as a subcontract. Proposals must be submitted by the deadline of August 11, 2026, with no specified point of contact or place of performance details provided beyond the domestic scope. All work must align with DLA’s logistical and compliance frameworks to support military supply chain integrity.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 541330
New
DIBBS
Supply Chain Compliance & Documentation ManagementThe contract titled Supply Chain Compliance & Documentation Management is a small business set-aside subcontract under the NAICS code 541330, issued by the ASC Commodities Division of the Department of Defense. It requires comprehensive documentation and compliance support specifically tailored to defense supply chain regulations, with a focus on tracking the phase-out of non-compliant materials, maintaining detailed traceability records, and accurately processing shipping instructions. The work is critical to ensuring adherence to federal defense standards and maintaining the integrity of the supply chain from origin to delivery. Response submissions are due by August 11, 2026, with the solicitation posted on July 29, 2026, and full performance will be conducted within the Department of Defense’s operational framework. Only small businesses qualified under the SBA’s Total Small Business Set-Aside provisions are eligible to respond, reinforcing the government’s commitment to supporting small business participation in defense-related contracts.
Engineering Services

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 335931
New
DIBBS
Special-Purpose Electrical Cable Assembly ManufacturingThe contract calls for the manufacture and delivery of 300 units of a special-purpose electrical cable assembly identified by NSN 6150-01-347-8428, with strict adherence to International Traffic in Arms Regulations and Export Administration Regulations, requiring full compliance with ITAR and EAR requirements. Every unit must include comprehensive traceability throughout the production process and meet all mandated packaging standards to ensure secure handling and transport. The solicitation is structured as a subcontract with a total small business set-aside under the SBA program, reserved exclusively for small businesses as defined by FAR 19.5. It falls under NAICS code 335931 for Other Electrical Equipment and Component Manufacturing and is issued by the ASC Commodities Division under the Department of Defense. Responses are due by August 11, 2026, with the opportunity posted on July 29, 2026, and all work must be performed in accordance with defense-grade protocols for quality, security, and documentation.
Current-Carrying Wiring Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 541618
New
DIBBS
Supply Chain Documentation & Traceability ManagementThe contract requires the creation and ongoing maintenance of comprehensive traceability documentation for all manufactured items, ensuring full accountability from raw material sourcing through production to final inspection. This includes securing and organizing material certifications, detailed process records, and inspection data to meet rigorous audit and government inspection requirements at the origin point. The documentation must be accurate, complete, and readily accessible to support compliance with defense standards and regulatory obligations. This subcontract, issued under the Department of Defense’s ASC Commodities Division, falls under NAICS code 541618 and is focused on supply chain documentation and traceability management. The solicitation was posted on July 29, 2026, with responses due by August 11, 2026. Performance is expected to occur at the contractor’s facility or designated manufacturing site, though specific location details are not provided. There is no set-aside classification indicated, and the work is critical to maintaining defense supply chain integrity through transparent, auditable records.
Other Management Consulting Services

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance & CMMC Level 2 ImplementationThe contract requires the implementation and ongoing maintenance of CMMC Level 2 compliance across all IT systems involved in manufacturing, documentation, and shipment processes, ensuring alignment with NIST SP 800-171 security controls. This includes establishing, documenting, and enforcing policies and procedures to protect controlled unclassified information, conducting regular assessments to validate control effectiveness, and maintaining readiness for third-party CMMC audits. The scope also mandates immediate cyber incident reporting in accordance with federal requirements, with defined workflows for detection, response, containment, and reporting to appropriate authorities. The contract is structured as a subcontract under the Department of Defense’s ASC Commodities Division and is linked to NAICS code 541512, indicating a focus on computer systems design services. It was posted on July 29, 2026, with a response deadline of August 11, 2026, and the place of performance is unspecified but tied to operational systems supporting manufacturing and logistics functions. Compliance is not a one-time effort but requires continuous monitoring, documentation updates, personnel training, and adaptation to evolving threats or regulatory changes to sustain CMMC Level 2 certification throughout the contract lifecycle.
Computer Systems Design Services

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 561910
New
DIBBS
Packaging, Labeling, and Hazard Communication ComplianceThe contract requires the packaging of finished cable assemblies in strict accordance with MIL-STD-129, ensuring all assemblies are properly labeled, marked, and documented for military logistics and shipment. This includes the accurate application of hazard warning labels on all packages containing hazardous materials, with full compliance to the OSHA Hazard Communication Standard to ensure safety and regulatory adherence throughout handling and transport. The work is classified as a subcontract under NAICS code 561910, indicating it falls within support activities for truck transportation, though the nature of the work is focused on military-grade packaging and hazard labeling rather than transportation services. The solicitation was posted on July 29, 2026, with responses due by August 11, 2026, and is managed by the ASC Commodities Division within the Department of Defense, with performance expected to align with federal defense supply chain requirements.
Packaging and Labeling Services

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 423690
New
DIBBS
Source-Controlled Component SupplyThe contract entails the supply of source-approved electrical components specifically designated for use in the fabrication of cable assemblies, requiring full traceability from manufacturer to final assembly and comprehensive documentation to ensure compliance with all technical and regulatory standards. All components must meet stringent source control requirements, with proven adherence to DFARS data rights and limited rights clauses, ensuring that intellectual property and technical data are handled in accordance with federal defense contracting mandates. The supplier is responsible for maintaining rigorous quality control and documentation protocols to support audit readiness and mission-critical performance. This subcontract is issued under the NAICS code 423690 and is administered by the ASC Commodities Division within the Department of Defense. The solicitation was posted on July 29, 2026, with bids due by August 11, 2026, and performance is expected to support defense-related infrastructure, though the exact place of performance is not specified. While no set-aside status is indicated, the contract mandates full compliance with federal sourcing and data handling regulations, making it suitable only for vendors with proven experience in supplying controlled electronic components to U.S. defense programs.
Other Electronic Parts and Equipment Merchant Wholesalers

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 335931
New
DIBBS
Power Cable Assembly ManufacturingThe contract calls for the manufacture of branched electrical power cable assemblies designated as RP001, strictly in accordance with specified contractual drawings. This includes end-to-end execution of component sourcing, precise assembly, rigorous testing to ensure performance and reliability, proper labeling, and secure packaging required for government delivery. All work must comply with technical and quality standards as outlined in the provided documentation, with full accountability for sourcing approved materials and maintaining traceability throughout the production process. The deliverables are intended for final use by a U.S. Department of Defense entity under the ASC Commodities Division. This is a subcontract opportunity under NAICS code 335931, with a response deadline of August 11, 2026, and a posting date of July 29, 2026. There is no set-aside designation or specific geographic performance location specified, but the final products must meet federal procurement requirements for military applications. All production, testing, and delivery activities are expected to be completed in alignment with defense logistics standards, ensuring readiness for direct government use. Potential respondents must be prepared to demonstrate capability in high-reliability electrical assembly and compliance with defense contract obligations.
Current-Carrying Wiring Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity and Controlled Unclassified Information (CUI) SafeguardingThe contract requires the implementation of NIST SP 800-171 safeguards to protect Covered Defense Information, encompassing the development of a comprehensive System Security Plan, enforcement of strict access controls, and establishment of protocols for timely incident reporting. All security requirements must be fully aligned with federal standards for safeguarding Controlled Unclassified Information, ensuring that systems and processes are configured to mitigate risks associated with unauthorized access, disclosure, or compromise. The scope includes not only the primary contractor’s environment but also mandates the flow-down of these cybersecurity obligations to all subcontractors, requiring consistent compliance across the entire supply chain. This subcontract, issued by the Department of Defense’s ASC Commodities Division under NAICS code 541512, is focused on cybersecurity services for defense-related information systems. The response deadline is August 12, 2026, with the solicitation posted on July 29, 2026, indicating a compressed timeline for qualification and proposal submission. Performance is expected to support DoD missions where the protection of sensitive data is critical, and all parties must demonstrate proven capability in implementing and maintaining NIST 800-171 controls without exception. Failure to meet these requirements may result in noncompliance penalties or termination of contractual obligations.
Computer Systems Design Services

POSTED

about 3 hours ago

DEADLINE

in 14 days
View Details
NAICS: 541611
New
DIBBS
Supply Chain Compliance and Origin DocumentationThe contract requires the preparation and submission of documentation to verify the domestic origin of bearing components in full compliance with DFARS 252.225-7016, which mandates strict adherence to the Buy American Act and related trade regulations. This includes providing detailed cost breakdowns, official supplier declarations affirming the origin of each component, and complete traceability records that link raw materials and manufacturing processes back to U.S.-based sources. All submitted materials must clearly demonstrate that every bearing component is mined, produced, manufactured, or substantially transformed within the United States, with no reliance on foreign-sourced inputs that would jeopardize compliance. The solicitation is issued under the NAICS code 541611 for management, scientific, and technical consulting services, and is categorized as a subcontract under the Department of Defense’s ASC Commodities Division. Respondents must meet the August 12, 2026 deadline for submission, with documentation needing to be thoroughly organized and auditable to support government verification efforts. While the place of performance and point of contact details are unspecified, the requirement applies to all entities involved in supplying bearing components and their associated supply chain partners. Failure to provide accurate, complete, and verifiable documentation will result in noncompliance and potential disqualification from contract award.
Administrative Management and General Management Consulting Services

POSTED

about 3 hours ago

DEADLINE

in 14 days
View Details
NAICS: 561910
New
DIBBS
Defense-Compliant Packaging, Preservation, and Labeling ServicesThe contract requires the provision of defense-compliant packaging, preservation, and labeling services for critical bearings used in military applications, adhering strictly to MIL-STD-129 for labeling, MIL-STD-2073-1E for preservation standards, and RP001 for palletization. All deliverables must ensure full traceability and seamless integration with the prime contractor’s existing traceability systems, which demands precise documentation and rigorous quality control throughout the process. The services are essential to maintaining operational readiness and compliance with Department of Defense supply chain requirements. This subcontract, issued by the ASC Commodities Division under the Department of Defense, targets vendors capable of handling high-stakes defense components with exacting military specifications. The solicitation was posted on July 29, 2026, with a response deadline of August 12, 2026, and falls under NAICS code 561910 for other support activities for transportation. Performance is expected to align with government logistics networks, and while specific location details are not provided, the work must support the broader defense supply chain infrastructure. Vendors must demonstrate proven experience in military packaging standards and the technical capability to interface securely and accurately with established traceability platforms.
Packaging and Labeling Services

POSTED

about 3 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332991
New
DIBBS
Cylindrical Roller Bearing Manufacturing and SupplyThe contract requires the manufacture and delivery of 200 cylindrical roller bearings meeting strict military specifications, with all production activities limited to the United States, its outlying areas, or Canada. At least 50 percent of the total component cost must originate from these regions to satisfy domestic content compliance requirements. Full documentation and successful completion of First Article Testing are mandatory to verify conformance to performance, dimensional, and quality standards before量产. The work is classified as a subcontract under NAICS code 332991, and the solicitation is managed by the ASC Commodities Division within the Department of Defense. Responses must be submitted by August 12, 2026, with the contract opportunity posted on July 29, 2026, and all deliverables must be performed in accordance with defense procurement protocols to ensure reliability and traceability for military use.
Ball and Roller Bearing Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 14 days
View Details