Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

BAR, METAL

Active
SPE8E4-26-T-2015Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract specifies the procurement of extruded aluminum alloy bars made from 6061 in the T6511 temper condition, with a diameter of 1.500 inches and a total length of 12 feet per bar, weighing approximately 2.080 pounds per foot. The material must meet stringent technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements and must comply with multiple specifications including SAE AMS-QQ-A-200/8A, ASTM B666/B666M-20, ASTM B660-23, and MIL-STD-129R. A Certificate of Quality Compliance, including mill material certification, is mandatory for every shipment and must be submitted to the DLA Troop Support Contracting Officer. Each bar must be continuously marked with the DLA contract order number, NSN, specification revision, alloy and temper, manufacturer’s name, heat and lot number, and dimensions using approved methods such as stenciling or stamping, ensuring legibility and durability without contamination. All bars must be supplied in whole-foot increments within the specified length tolerance. The supplier must be listed on the Qualified Suppliers List for Distributors (QSLD), and only approved QSLD distributors are eligible for award unless a formal deviation is declared. Non-compliance with the QSLD requirement constitutes an unauthorized substitution and may result in criminal penalties. Packaging and preservation must adhere to MIL-STD-2073-1E and ASTM B660, with labeling fully conforming to MIL-STD-129, including special marking code ZZ for preservation and marking. Palletization follows DLA packaging requirements. The contract specifies delivery of 298 feet to Tinker AFB, Oklahoma, under FOB origin terms with a 10% variance allowance, inspection and acceptance at destination, and an original delivery deadline of January 9, 2027, with a required ship date of January 18, 2027. This item is designated as a critical application item, and all documentation, including CDRL-METALSCERT, must be provided as required under the contract data requirements list.

General Info

6061-T6511 aluminum bars, 1.5-inch diameter, 12 feet long, QSLD-only, DLA contract, FOB origin, deliver to Tinker AFB by Jan 9, 2027

Agency

Department Of Defense → DEPOT OKLAHOMAView Agency

NAICS

332112 - Nonferrous ForgingView NAICS

Place of Performance

3301 F AVE CEN REC BLDG 506 DR 22, TINKER AFB, OK, 73145-8000, US

Set-Aside

NONE

Documents

(1)

RFQ SPE8E4-26-T-2015 Request for Quotations

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DEPOT OKLAHOMA
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → DEPOT OKLAHOMA
View Agency Profile
Office AddressUS
Contacts
Gail Carmack
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BAR,METAL
BAR<(>,<)> METAL
ALUMINUM ALLOY
6061 & T-6511
EXTRUDED, ROUND
1.500 IN DIA
12.00 FT LG
2.080 LB/FT (REF)
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
IY010: QUALIFIED SUPPLIERS LIST FOR DISTRIBUTORS (QSLD) REQUIREMENT (DLA
TROOP SUPPORT JUNE 1994) FOR FSG'S 95 AND 96.
ONLY SUPPLIERS LISTED ON THE QSLD ARE ELIGIBLE FOR AN AWARD PURSUANT TO
THIS SOLICITATION.
SUPPLIERS NOT QUOTING IN COMPLIANCE WITH THE QSLD REQUIREMENT MUST
INDICATE THEY ARE DEVIATING FROM THE REQUIREMENTS OF THE SOLICITATION.
ANY BID/QUOTE/OFFER BASED ON A PRODUCT SUPPLIED BY OTHER THAN AN
APPROVED QSL DISTRIBUTOR, EVEN THOUGH THE PRODUCT MIGHT HAVE BEEN
MANUFACTURED IN ACCORDANCE WITH THE DRAWING(S) AND/OR SPECIFICATION(S)
AS CITED IN THE PURCHASE ORDER
TEXT (POT) IS A BID/QUOTE/OFFER WITH EXCEPTION AND MUST BE SO INDICATED
BY THE
QUOTER/OFFEROR.
ANY PRODUCT FURNISHED UNDER A CONTRACT OR ORDER FOR A PRODUCT DESIGNATED
AS PART OF THE QSL PROGRAM, UNLESS SPECIFICALLY AUTHORIZED BY THE
GOVERNMENT IN WRITING, MUST FULLY COMPLY WITH THE TERMS AND CONDITIONS
OF THE QSL PROGRAM. ANY PRODUCT, WHICH DOES NOT FULLY COMPLY WILL BE
CONSIDERED AN UNAUTHORIZED SUBSTITUTION, AND MAY YIELD CRIMINAL
PENALTIES IN ADDITION TO ANY CIVIL REMEDIES AVAILABLE TO THE GOVERNMENT.
FOR THIS SOLICITATION, AND ANY RESULTING ORDER ISSUED TO AN APPROVED
QSLM/QSLD SUPPLIER
WHOSE QUOTE IS BASED ON COMPLIANCE WITH THE QSL PROGRAM, (EXCEPT IN THE
CASE OF FMS (FOREIGN MILITARY SALE) REQUIREMENTS), REFERENCES TO SOURCE
INSPECTION ARE HEREBY WAIVED. IN SUCH CASES, COQC, PVT, QAP-EQ003, ASQ
H1331, AND RQ006: QUALITY CONFORMANCE INSPECTION REQUIREMENTS, IF
REFERENCED, DO NOT APPLY.
SPE8E4-26-T-2015
SECTION B
FOR MORE INFORMATION ABOUT THE QSL PROGRAM GO TO THE FOLLOWING WEBSITE:
https://www.dla.mil/TroopSupport/IndustrialHardware/Engineering-and-Tech nical-services/Qualified-Suppliers-List/
-ORWRITE TO: DLA TROOP SUPPORT, ATTN: DLA TROOP SUPPORT FHTF, BLDG 3/B, 700 ROBBINS AVENUE, PHILADELPHIA, PA 19111-5092
Qualification requirements in procurement note #M03 Qualified Suppliers List for Manufacturers (QSLM)/Qualified Suppliers List for Distributors (QSLD) for Troop Support# apply. The full text of procurement note M03 can be found in the DLA Directive (DLAD) of Procurement Notes on the Web at: https://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx.
(END STO)
Metal Certification Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information. If CDRL-METALSCERT is missing from DLA Technical Data Management Transformation (TDMT) they can also be viewed in the DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
A Certificate of Quality Compliance (Mill-Material Certification) is required. A copy of the Certificate of Quality Compliance shall be provided with every shipment to the customer or DLA depot, and a copy of the Certificate of Quality Compliance provided for each shipment shall be forwarded to the DLA Troop Support Contracting Officer identified on the award.
CONTINUOUS IDENTIFICATION MARKINGS ARE REQUIRED IN ADDITION TO THE
MARKING REQUIREMENTS CITED IN THE PROCUREMENT SPECIFICATION:
AS A MINIMUM, EACH UNIT OF ISSUE (FEET,PLATE, OR SHEET) SHALL BE
IDENTIFIED WITH THE (1) DLA CONTRACT DELIVERY ORDER NUMBER, (2) NSN, (3)
SPECIFICATION NUMBER AND REVISION, (4) GRADE,CLASS & TYPE, ALLOY, PART
NUMBER,DIE NUMBER, AND TEMPER, (5) MANUFACTURER'S NAME, HEAT AND LOT
NUMBER, (6) DIMENSIONS.
MATERIAL SHALL BE SUPPLIED WITHIN THE REQUIRED MIN-MAX LENGTH
REQUIREMENTS AND MUST IN WHOLE FEET LENGTH ONLY (I.E. 10, 11, OR 12 FT
EVEN)
PERMISSIBLE MARKING METHODS ARE STAMPING (EXCEPT DIE STAMP) OR
STENCILING. THE CHARACTERS SHALL BE OF SUCH A SIZE AS TO BE LEGIBLE AND
VISIBLE TO THE UNAIDED EYE. THE MARKING FLUID APPLIED SHALL NOT
CONTAMINATE, OR OTHERWISE HAVE A DETRIMENTAL EFFECT ON THE PRODUCT OR
ITS PERFORMANCE. THE MARKINGS SHALL BE WATERPROOF AND SUFFICIENTLY
STABLE TO WITHSTAND NORMAL HANDLING.
IN LIEU OF "LINE MARKINGS", ADHESIVE LABELS ARE REQUIRED FOR EACH UNIT
OF STRAIGHT BARS, TUBES AND SHAPES, UNDER 0.250 INCHES IN NOMINAL OD,
AND TO BE SECURELY FASTENED. TAGS WILL BE ACCEPTABLE METHOD FOR WIRES.
FAILURE TO COMPLY WILL BE CAUSE FOR REJECTION OF END PRODUCT."
CRITICAL APPLICATION ITEM
TDP Rev A Gen 1 IAW BASIC NON GOVT STD SAE AMS-QQ-A-200/8A REVISION NR A DTD 05/01/2015 PART PIECE NUMBER: ALLOY 6061 TEMPER T6511
SPE8E4-26-T-2015
SECTION B
TDP Rev A Gen 1 IAW REFERENCE QAP 13873 CDRL-METALSCERT-26124 REVISION NR DTD 12/04/2025 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE STD NR MIL-STD-129R(3) REVISION NR R DTD 02/25/2023 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE NON GOVT STD SAE AMS-QQ-A-200C REVISION NR C DTD 11/01/2019 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE NON GOVT STD ASTM B666/B666M-20 REVISION NR M DTD 11/01/2020 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE NON GOVT STD ASTM B660-23 REVISION NR DTD 11/01/2023 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017585985 0001 FT 298.000
NSN/MATERIAL:9530010828329
DELIVERY (IN DAYS):0153
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 10% MINUS 10%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C
UNIT CONT:00 OPI:M
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PRESERVATION ZZ = IAW ASTM B660 PACKING Z = IAW ASTM B660 MARKING IAW MIL-STD-129
SPE8E4-26-T-2015
SECTION B
PR: 7017585985 PRLI: 0001 CONT’D
ADDITIONAL MARKING REQUIREMENTS: WHEN THE
CONTRACT OR ORDER REFLECTS TWO UNITS
(EXAMPLE: FT-LB, LB-SH, LB-CL, ETC.)
SHIPMENT MARKINGS SHALL INCLUDE THE
QUANTITY OF BOTH UNITS. THIS MARKING
DOES NOT APPLY FOR MATERIAL SHIPPED LOOSE.
PARCEL POST ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
Need Ship Date:01/18/2027 Original Required Delivery Date:01/09/2027
SPE8E4-26-T-2015 NSN/Part Number: 9530-01-082-8329 Quantity: 298 FT Purchase Request: 7017585985QTY: 298 Delivery: 153 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332112
New
DIBBS
Precision Machined Mounting Plate SupplyThe contract requires the manufacture and delivery of 30 precision-machined mounting plates in full compliance with military specifications covering material composition, dimensional tolerances, and mandatory marking requirements. All units must meet strict quality and performance standards dictated by defense industry norms to ensure interoperability and reliability in military vehicle systems. The work is classified as a subcontract under NAICS code 332112 and is being procured by the Department of Defense through its Land Supplier Operations Vehicle Support division. Proposals must be submitted by the deadline of August 17, 2026, with the solicitation originally posted on August 5, 2026. The place of performance and point of contact details are not specified, but all deliveries and compliance certifications are expected to align with federal defense contracting protocols and traceability requirements.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332112
New
DIBBS
Precision Machining of Centrifugal Pump ImpellerThe contract calls for the manufacture of two precision centrifugal pump impellers designed for critical applications requiring strict compliance with military or industrial specifications. This subcontract is part of the Department of Defense’s Maritime Supply Chain initiative and is classified under NAICS code 332112, indicating it falls within the precision machining and manufacturing sector for pumps and pumping equipment. The impellers must meet exacting quality and performance standards to ensure reliable operation in demanding environments, where failure is not an option. All work must be completed to stringent technical requirements without deviation, emphasizing dimensional accuracy, material integrity, and surface finish. The solicitation was posted on August 5, 2026, with a firm deadline for responses on August 12, 2026, leaving a limited window for qualified subcontractors to submit proposals. The place of performance and point of contact details are not specified, suggesting the contractor may have flexibility in location but must still meet all delivery and certification benchmarks. The contract is accessible through the DIBBS platform, and interested parties must ensure full alignment with the technical and compliance demands outlined in the full RFQ to be considered for award. There is no set-aside designation, meaning any eligible supplier may bid regardless of business size or ownership characteristics.
MARITIME SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332112
New
DIBBS
Pressure Switch Supply (NSN 5930-00-192-4507)The contract solicits the supply of five pressure switches identified by NSN 5930-00-192-4507, distributed across two contract line items, with delivery required to Fort Eustis, Virginia, under the procurement authority of the Department of Defense’s Electrical Devices Division. All items must strictly adhere to DLA technical standards, and contractors are obligated to submit a comprehensive data package if proposing any alternate parts in lieu of the specified NSN. The solicitation, posted on August 5, 2026, closes for responses on August 17, 2026, and is classified as a subcontract under NAICS code 332112, indicating manufacturing of electrical equipment and wiring supplies. No set-aside designation or point of contact information is provided, and the procurement is conducted through the DIBBS platform with the reference number SPE7M826T5710.
ELECTRICAL DEVICES DIV

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332112
New
DIBBS
BOLT, MACHINE
Solicitation # SPE4A6-26-T-13BN
The contract pertains to the procurement of 814 units of a machine bolt identified by NSN 5306-00-462-4317, classified as a commercial item and governed by established military or consensus non-government standards. The hardware must be manufactured to the current revision of the defining standard, with prior revisions still acceptable if they were current at the time of manufacture. Item Unique Identification is explicitly not required per the service customer’s request, and DFARS 252.211-7003(c)(1)(i) applies. Technical and quality requirements referenced by R or I numbers are incorporated by reference from the DLA Master List, and packaging must comply with DLA specifications. Inspection and acceptance occur at the origin, and government identification must be removed from non-accepted supplies. Measuring and test equipment standards are applicable, and physical identification of the bare item is required. The solicitation, issued under number SPE4A6-26-T-13BN, was posted on August 5, 2026, with responses due by August 13, 2026, and delivery is required within 156 days after order. The acquisition is fully competitive, under NAICS code 332112, managed by the Department of Defense’s ASC Commodities Division, with performance to be delivered to Tracy, California, 95304-5000. Primary point of contact is Priscilla Holmes.
ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332112
New
DIBBS
CHANNEL, STRUCTURAL
Solicitation # SPE8E4-26-T-1982
The contract specifies the procurement of structural aluminum channels made from 6061 aluminum alloy in T6 or T6511 temper, with a width of 4.0 inches, height of 1.647 inches, thickness of 0.180 inches, and a weight of 2.210 pounds per foot. Lengths must be between 20 and 30 feet and delivered in whole-foot increments only. The profile must conform to specific die numbers from approved manufacturers including Alcoa, Tiernay, Kaiser, and Reynolds. Material must meet stringent quality standards defined by ASTM B666/B666M-20, SAE AMS-QQ-A-200/8A, and SAE AMS-QQ-A-200C, and suppliers must be listed on the Qualified Suppliers List for Distributors (QSLD) to be eligible. Every shipment requires a Certificate of Quality Compliance, along with continuous identification markings on each unit that include the DLA contract number, NSN, specification revision, alloy, temper, die number, manufacturer, heat and lot numbers, and dimensions. Markings must be legible, waterproof, and applied via stamping or stenciling using non-contaminating fluids. Packaging must follow MIL-STD-2073-1E and MIL-STD-129 guidelines with preservation per ASTM B660 and palletization per DLA requirements. A minimum of 50 feet is required, with a 10% variance allowed, and delivery is FOB origin with inspection and acceptance at destination. The product is classified as a critical application item, and failure to comply with any requirement, particularly regarding supplier qualification or marking, may result in rejection or criminal penalties. The delivery deadline is 83 days from award, with an original required delivery date of September 9, 2026, and the final ship date set for November 9, 2026, to DLA District San Joaquin in Tracy, California.
DLA DIST SAN JOAQUIN

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332112
New
DIBBS
BOLT, MACHINE
Solicitation # SPE4A6-26-T-13NJ
The contract specifies the procurement of 209 machine bolts identified by NSN 5306-01-377-1546 and part number 12418102, manufactured to the current revision of a recognized military or consensus non-government part standard, with past revisions also acceptable if they were current at the time of manufacture. The item is classified as a commercial item and is designated as a critical application component requiring strict compliance with technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and attributes must be verified at designated levels with AQLs of 0.1 for critical, 1.0 for major, and 4.0 for minor. Configuration control, engineering change proposals, and variance requests are governed by specific DLA protocols including RQ002 and RQ017 for physical marking and removal of government identification from non-accepted items. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129 respectively, with no special marking required and palletization following DLA packaging standards. Delivery is FOB origin with inspection and acceptance occurring at destination, and the required delivery date is August 5, 2026, with a 182-day lead time. The item must be shipped to the DLA Distribution Center in New Cumberland, PA, and the contractor must comply with all applicable Defense Logistics Agency procedures, including proper unit of issue and transportation guidelines. Certification of conformance is authorized unless overridden by a quality assurance letter of instruction.
ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332112
New
DIBBS
BEAM, STRUCTURAL
Solicitation # SPE8E4-26-T-2010
The contract specifies the procurement of structural beams made from aluminum alloy 7075/T-6511 with dimensions of 2.250 inches in height, 3.50 inches in width, and 0.156 inches in thickness, supplied in whole-foot lengths between 10 and 12 feet, weighing approximately 1.050 pounds per foot. All material must comply with technical and quality standards referenced in the DLA Master List, including certification requirements such as a Certificate of Quality Compliance (Mill-Material Certification) with each shipment, and mandatory continuous markings on every unit that include the DLA contract number, NSN, specification revision, alloy and temper, manufacturer’s heat and lot number, and dimensions. Markings must be legible, waterproof, and applied via stamping or stenciling without contaminating the material, and adhesive labels are required for smaller bars and tubes under 0.250 inches nominal OD. Packaging must follow MIL-STD-2073-1E and marking must conform to MIL-STD-129, with shipment labels including both units of measure if applicable. The material must be sourced exclusively from suppliers listed on the Qualified Suppliers List for Distributors (QSLD), and any deviation from this requirement constitutes an unauthorized substitution with potential criminal and civil penalties. The contract includes two line items totaling 17,160 feet—80 feet for delivery to Cherry Point, North Carolina, and 17,080 feet to Jacksonville, Florida—with a 42-day delivery window, a 10% quantity variance allowance, and FOB origin terms. Inspection and acceptance occur at the destination, and metal certification documentation must be submitted to the DLA Troop Support Contracting Officer. The solicitation is a HUBZone set-aside under NAICS code 332112, with response deadlines and technical data package references aligned to standards including SAE AMS-QQ-A-200/11A, ASTM B666/B666M-20, and NAS344.
CHERRY POINT PHANTOM RD BLDG

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332112
New
DIBBS
STRUCTURAL SECTION,
Solicitation # SPE8E4-26-T-1962
The contract specifies the procurement of 31 units of a structural section made from 6061 aluminum alloy in T4 temper, extruded to a length of 12 feet with part number BAC1520-606 and national stock number 9540-01-482-2307. Each part must be marked per MIL-STD-130 with the NSN, part number, current design authority code 98748, actual manufacturer’s cage code, date of manufacture, and the phrase “FOR MILITARY USE ONLY,” explicitly prohibiting the use of Boeing’s original cage code. Packaging must comply with DLA’s RP001 requirements, and all technical and quality standards referenced are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date. The item is subject to export control under ITAR or EAR, restricting technical data disclosure to foreign persons anywhere, including U.S. subsidiaries and foreign nationals in the U.S., with DFARS 252.225-7048 enforcing compliance. Access to controlled data is limited to DLA contractors who hold JCP certification, have completed required DLA training and questionnaire, and have received formal approval. Delivery is due 167 days after award under solicitation SPE8E4-26-T-1962, issued by the Department of Defense through Depot Oklahoma at Tinker AFB, with responses due by August 17, 2026, and primary point of contact Pamela Duffey.
DEPOT OKLAHOMA

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332112
New
DIBBS
SCREW, MACHINE
Solicitation # SPE4A6-26-T-13CA
The contract is for the procurement of 230 machine screws with the NSN/Part Number 5305-00-551-6444, issued under solicitation SPE4A6-26-T-13CA by the Defense Logistics Agency’s ASC Commodities Division. Delivery is required within 80 days after delivery order, and responses must be submitted by August 13, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue date or award date depending on the acquisition size. The item is subject to several DLA-specific requirements including packaging standards, removal of government identification from non-accepted supplies, physical marking of bare items, and strict export controls. Technical data associated with this item is classified under ITAR or EAR regulations, prohibiting unauthorized export or disclosure to foreign persons, including foreign nationals within the U.S. Contractors must possess a valid US/Canada Joint Certification Program certification, have completed mandatory DLA export control training and questionnaire, and have received explicit approval from DLA to access the controlled data. The place of performance is Tinker Air Force Base, Oklahoma, and the primary point of contact is Nyjel Knowlin, reachable via email at nyjel.knowlin@dla.mil.
ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332112
New
DIBBS
SCREW, CAP, HEXAGON H
Solicitation # SPE4A6-26-T-13KL
The contract pertains to the procurement of hexagon head cap screws, identified by NSN 5305013308496 and part number 12414475-113, under solicitation SPE4A6-26-T-13KL, with a total quantity of 87 packaging units, each containing 50 screws, effective March 1, 2023. The item is designated as a critical application item and must conform to Technical Data Package Revision A Generation 3, aligned with multiple reference drawings dated between 2011 and 2026. All supplies must comply with DLA packaging requirements and the DLA Master List of Technical and Quality Requirements, incorporated by reference. Sampling procedures must adhere to MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise specified; critical, major, and minor attributes are assigned verification levels VII, IV, and II with corresponding AQLs of 0.1, 1.0, and 4.0. Unit of issue is PG and delivery is FOB origin within 37 days. Inspection and acceptance occur at destination, with no variance allowed in quantity. Packaging must follow MIL-STD-2073-1E and marking must comply with MIL-STD-129, with no special marking required. Palletization must meet DLA packaging standards. The contract is issued by the Department of Defense, ASC Commodities Division, with performance to be conducted in New Cumberland, PA.
ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332112
New
DIBBS
SCREW, CAP, HEXAGON HEAD
Solicitation # SPE4A6-26-T-53F2
The contract pertains to the procurement of eight hexagon head cap screws identified by NSN 5305-01-377-3717, with a delivery requirement of 171 days after award. The technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective on either the solicitation issue date or award date depending on the acquisition size. Packaging must comply with DLA requirements, and all items must be marked in accordance with MIL-STD-130N for U.S. military property identification. Non-accepted supplies must have government identification removed as directed, and each screw must be physically marked according to the bare item marking standard. Sampling and inspection follow MIL-STD-1916 or an equivalent zero-based plan, with acceptance criteria requiring zero non-conformances unless otherwise specified, and attributes are classified with stringent verification levels or AQLs. The use of mercury or mercury-containing compounds is strictly prohibited unless explicitly exempted for specific functional components, and any permitted mercury-containing items must include shockproof design and secondary containment as per NAVSEA guidelines. The solicitation number is SPE4A6-26-T-53F2, issued on August 5, 2026, with responses due by August 10, 2026, under the NAICS code 332112, and performance is designated for Tracy, CA, with Myonka Boyd listed as the primary point of contact.
ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332112
New
DIBBS
BOLT, MACHINE
Solicitation # SPE4A6-26-T-10DR
The contract pertains to the procurement of 231 machine bolts identified by NSN 5306-00-785-1102 and part number 9411631, supplied to meet technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements. The items are designated as critical application components for General Motors Corp and Rolls-Royce Solutions America Inc, requiring strict adherence to MIL-STD-1916 or ASQ H1331 sampling protocols with zero non-conformances permitted unless otherwise stated. Attributes are to be classified with verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively for critical, major, and minor characteristics. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 marking standards, with no special marking required, and palletization must conform to DLA packaging requirements. The items must be delivered FOB origin within 164 days, with no variance allowed in quantity, inspected and accepted at destination. The delivery address is DLA Distribution Depot Hill at Hill AFB, Utah, with freight shipping instructions referencing DLAD procedural notes C19 and C20. The original required delivery date is January 27, 2027, with a need ship date of January 17, 2027. The contract, issued under solicitation SPE4A6-26-T-10DR, was posted on July 28, 2026, with responses due by August 5, 2026. It falls under NAICS code 332112 and is managed by the Department of Defense’s ASC Commodities Division. The unit of issue is each, with a total price of $231.00 at $1.00 per unit. Technical compliance, packaging, marking, and delivery protocols are binding and must align with all referenced DLA and military standards without exception.
ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

in 4 days
View Details

More opportunities from Department Of Defense → DEPOT OKLAHOMA

Same awarding agency

NAICS: 332320
New
DIBBS
Instruction Plate Manufacturing and DeliveryThe contract requires the manufacture and delivery of three military instruction plates identified by NSN 9905008816118, fully compliant with the technical data package TDP Rev A Gen 1 and all referenced part numbers and marking standards. The work must be executed to meet stringent military specifications, ensuring each unit is accurately produced and labeled in accordance with established guidelines. This is a subcontract under the NAICS code 332320, indicating classification within the other fabricated metal product manufacturing sector, and is issued by the Department of Defense through the agency known as DEPOT OKLAHOMA. Performance is to occur at TINKER AFB with a ZIP code of 73145-8000, and the solicitation was posted on August 5, 2026, with a response deadline of August 17, 2026. The opportunity is not set aside for any specific small business category, and interested parties must submit proposals via the designated DIBBS portal before the stated deadline.

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 331491
New
DIBBS
Aluminum Alloy Alclad Sheet ManufacturingThe contract involves the manufacture and supply of aluminum alloy Alclad sheets adhering strictly to military specifications, with exact requirements for dimensions, cladding thickness, and temper designation to ensure performance and durability under demanding operational conditions. The materials must meet rigorous quality standards to support defense applications, and the production process must verify compliance with established technical criteria throughout all phases of fabrication. The contract is a subcontract issued under the NAICS code 331491, with performance obligated at Tinker Air Force Base, Oklahoma, and a response deadline of August 17, 2026. The contracting entity is the Department of Defense through the Depot Oklahoma office, and the solicitation is managed through the DIBBS system under reference SPE8E426T1945. All proposals must be submitted prior to the deadline to be considered, and suppliers are expected to demonstrate proven capability in producing military-grade Alclad sheets to support critical defense infrastructure.
Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and Extruding

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 325998
New
DIBBS
Additive Manufacturing Filament SupplyThe contract seeks the supply of industrial-grade filament specifically engineered for additive manufacturing systems used in defense applications, with all materials required to comply with federal logistics and defense supply chain standards. This subcontract is a total small business set-aside under the SBA program, meaning only qualified small businesses may bid, and the NAICS code 325998 identifies the category as other chemical product and preparation manufacturing. The performance location is designated as Tinker Air Force Base with a zip code of 73145-8000, indicating the filament will be delivered directly to a critical Department of Defense facility. The solicitation was posted on August 5, 2026, with responses due by August 17, 2026, and the contract is managed under the Department of Defense through the Depot Oklahoma office, emphasizing the strict quality and compliance controls expected for materials used in military-grade 3D printing operations.
All Other Miscellaneous Chemical Product and Preparation Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 484220
New
DIBBS
Logistics & Delivery to Tinker AFBThe contract requires comprehensive logistics services for final packaging, transportation, and FOB Destination delivery to Tinker AFB, Oklahoma, with strict adherence to delivery protocols and coordination with either the Defense Logistics Agency or the prime contractor. All activities must include careful scheduling of deliveries, timely communication with relevant parties, and submission of verified proof of delivery to confirm successful receipt at the specified location. The scope emphasizes operational precision and accountability throughout the supply chain to ensure compliance with military standards and timelines. This subcontract, categorized under NAICS code 484220 for truck transportation, is issued by the Department of Defense through Depot Oklahoma, with a response deadline of August 17, 2026, and a posted date of August 5, 2026. The place of performance is clearly defined as Tinker AFB with a zip code of 73145-8000, indicating the exact destination for all shipments. While no specific set-aside status or point of contact is provided, bidders must be prepared to fully execute the logistics requirements as outlined, ensuring seamless integration with existing DLA or prime contractor operations.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Material Compliance & LabelingThe contract requires the provision of OSHA-compliant hazard warning labels and Safety Data Sheets for tungsten-based rotary files, adhering to 29 CFR 1910.1200 and DFARS 252.223-7001. All individual units or their packaging must be properly labeled to communicate chemical hazards, handling precautions, and emergency response information as mandated by federal regulations. The SDS must be complete, accurate, and aligned with the Globally Harmonized System of Classification and Labeling of Chemicals to ensure user safety and regulatory compliance across all distribution and usage channels. This subcontract is issued by the Department of Defense under the agency name DEPOT OKLAHOMA, with performance required at TINKER AFB, Oklahoma, zip code 73145-8000. The solicitation falls under NAICS code 541690 and was posted on August 5, 2026, with responses due by August 17, 2026. The contractor is expected to deliver compliant documentation and labeling without delay, ensuring all materials meet stringent defense and workplace safety standards, and to maintain ongoing alignment with federal hazardous communication requirements throughout the contract lifecycle.
Other Scientific and Technical Consulting Services

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332215
New
DIBBS
Precision Rotary File ManufacturingThe contract requires the manufacture of precision rotary files adhering to military specification A-A-51154B-2A7B REV B, encompassing full production, rigorous quality control, proper packaging, and timely delivery. Each file must have a .250-inch shank, be constructed from tungsten, feature spiral fluting, and contain between 16 and 20 teeth per inch to meet exacting performance standards. The work is classified as a subcontract under NAICS code 332215 and is being managed by the Department of Defense through Depot Oklahoma, with performance centered at Tinker Air Force Base, Oklahoma, zip code 73145-8000. All bids must be submitted by August 17, 2026, following the solicitation posted on August 5, 2026, and adherence to the military specification is mandatory for compliance and acceptance.
Metal Kitchen Cookware, Utensil, Cutlery, and Flatware (except Precious) Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332111
New
DIBBS
BAR, METAL
Solicitation # SPE8E4-26-T-2003
The contract specifies the procurement of cold drawn, normalized, flat steel bar material composed of SAE 4130 alloy, with a thickness of 1.000 inch, width of 2.000 inches, and length between 10 and 12 feet in whole-foot increments only, with a reference weight of 6.800 pounds per foot. The material must be supplied with a Certificate of Quality Compliance, including mill certification, provided with every shipment and forwarded to the DLA Troop Support Contracting Officer. Continuous identification markings are mandated on each unit, including the DLA delivery order number, NSN, specification revision, alloy and temper, manufacturer’s name, heat and lot number, and dimensions, applied via stamping or stenciling that must be legible, waterproof, and non-contaminating. Adhesive labels are required for bars under 0.250 inches in nominal OD. Packaging must follow MIL-STD-2073-1E and DLA packaging requirements, with special codes Z and ZZ per ASTM A700, and marking in compliance with MIL-STD-129. The NSN is 9510-00-640-4974, quantity is 75 feet, unit price is $75.00 per foot for a total of $5,625, with delivery required within 153 days FOB origin to Tinker AFB, Oklahoma. Quality and technical requirements are governed by the DLA Master List of Technical and Quality Requirements and referenced standards such as SAE AMS-S-6758B and SAE AMS2806. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible; deviations must be explicitly declared, and non-compliant submissions constitute unauthorized substitutions with potential criminal penalties. Shipments must include both units of measure when specified, and the requirement to provide CDRL-METALSCERT-26124 documentation is binding. Source inspection is waived for QSLD-compliant suppliers, eliminating the need for additional quality conformance inspections under referenced protocols.
Iron and Steel Forging

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336310
New
DIBBS
CARTRIDGE, SAFETY RELIE
Solicitation # SPE7MC-26-T-168Y
The contract specifies the procurement of 17 safety relief cartridges with a cracking pressure set at 300 PSI, identified by NSN 4820-01-056-0209 and manufacturer part number 133097-14 from MEGGITT NORTH HOLLYWOOD INC. Delivery is required FOB origin within 142 days, with no tolerance for quantity variance, and inspection and acceptance must occur at the point of origin. All packaging must comply with ASTM D3951 and be marked and labeled according to MIL-STD-129, with palletization governed by DLA’s RP001 packaging requirements, which take precedence over other standards. The item is classified as a critical application item, and no ozone-depleting chemicals may be used under any circumstances, even if specifications suggest otherwise; any substitute materials require prior approval. Quality requirements from the DLA Master List of Technical and Quality Requirements, referenced by R-numbers such as RQ001, RQ002, and RQ009, apply and include configuration change management, inspection at origin, and removal of government identification from non-accepted supplies. A Certificate of Conformance is authorized unless explicitly withheld by a Quality Assurance Letter of Instruction. The delivery destination is Tinker AFB, Oklahoma, with a required ship date of August 28, 2025, and the original delivery deadline is April 10, 2027. The contract was issued under solicitation SPE7MC-26-T-168Y, with point of contact Paula Mcclary, and falls under NAICS code 336310 for aerospace manufacturing.
Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332111
New
DIBBS
BAR, METAL
Solicitation # SPE8E4-26-T-2008
Steel bar material compliant with specification 4130, cold finished and normalized, is required in a 0.500 inch diameter and 10 to 12 foot length, delivered in whole foot increments only, with a reference weight of 0.668 pounds per foot. This item is designated as a critical application product and must fully conform to technical standards including SAE AMS-S-6758B, MIL-STD-129R, ASTM A700-14, and SAE AMS2806. Each unit must carry continuous identification markings that include the DLA contract delivery order number, NSN, specification revision, alloy grade, manufacturer name, heat and lot number, and dimensions, applied via stamping or stenciling in a legible, waterproof, and durable manner. Adhesive labels are required for bars under 0.250 inches in diameter and tags for wire. Certification of quality compliance, including mill material data, must accompany every shipment and be submitted to the DLA Troop Support Contracting Officer. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible to respond; any deviation from this requirement must be explicitly noted and constitutes an exception. Packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements, with preservation methods in accordance with ASTM A700 and special codes Z and ZZ. Marking and labeling shall fully comply with MIL-STD-129, including the use of vinyl or plastic-coated pressure-sensitive labels where authorized. The delivery is FOB origin, with inspection and acceptance occurring at destination, within a 64-day timeline, with a 10% variance in quantity permitted. The product is subject to defense information controls and all applicable DLA technical and quality requirements referenced through the DLA Master List. Supply chain compliance, material origin, and certification are strictly enforced, with noncompliance potentially resulting in rejection of goods and criminal penalties.
Iron and Steel Forging

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326113
New
DIBBS
PLASTIC SHEET
Solicitation # SPE8E5-26-T-3785
The contract specifies a plastic sheet manufactured using the cast method from acrylic, with dimensions of 48 inches long by 36 inches wide and a thickness of 0.187 inches. It must be plain, transparent, colorless, and fully comply with Type 1, Class 1, Finish A requirements as defined by MIL-PRF-8184F, and adhere to QPL 8184, with only QPL-approved manufacturers eligible to supply the product at the time of award. The item is classified as a critical application component, and all technical and quality specifications referenced by R-numbers are governed by the DLA Master List of Technical and Quality Requirements, which supersedes any commercial standards such as ASTM D3951. The product must be packaged in accordance with RP001 DLA Packaging Requirements for Procurement and labeled per MIL-STD-129, with hazardous material handling following FED-STD-313 and TQ requirement IP025 if applicable. The contract calls for 21 ship units with zero variance allowed in quantity and requires delivery FOB origin within 167 days, with the final delivery deadline set for February 1, 2027. Inspection and acceptance occur at the destination, and packaging must meet the specified Unit of Issue and Quantity per Unit Pack as outlined in the contract. The delivery destination is DLA Distribution Depot Oklahoma at Tinker AFB, with all transportation subject to DLAD Proc Notes C19 and C20. The solicitation number is SPE8E5-26-T-3785, with a response deadline of August 17, 2026, and the primary point of contact is Brandon Wicker. The NSN 9330-00-634-8636 is linked to a government procurement under a federal solicitation, and the offeror must guarantee that all components originate exclusively from qualified sources on the approved QPL.
Unlaminated Plastics Film and Sheet (except Packaging) Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 331110
New
DIBBS
SHEET, METAL
Solicitation # SPE8E4-26-T-1968
This contract specifies the procurement of aluminum alloy sheet metal with precise dimensional and material requirements: 0.050 inches thick, 48.00 inches wide, and 144.00 inches long, weighing approximately 33.50 pounds per sheet. The material must conform to alloy 5052 in the O-annealed temper, as defined by SAE AMS-QQ-A-250/8C and other referenced standards including ASTM B666/B666M-20 and ASTM B660-23. Strict compliance with the Qualified Suppliers List for Distributors (QSLD) is mandatory; only suppliers listed on the DLA Troop Support QSLD are eligible for award, and any deviation or use of non-approved distributors constitutes an unauthorized substitution that may trigger criminal penalties. All sheets must be supplied in whole-foot lengths only and must be marked with continuous identification including the DLA contract number, NSN, specification revision, alloy and temper, manufacturer’s name, heat and lot number, and exact dimensions, using approved methods such as stamping or stenciling that ensure legibility and durability without contamination. A Certificate of Quality Compliance, or mill material certification, must accompany each shipment and be forwarded to the contracting officer. Packaging and marking must strictly follow MIL-STD-2073-1E and MIL-STD-129R, with preservation governed by ASTM B660, and all units must be palletized as per DLA packaging requirements. Delivery is FOB origin, with no variance allowed in quantity, and the product must be delivered to Tinker AFB, Oklahoma, within 167 days of contract award. The contract explicitly waives source inspection requirements for QSL-compliant suppliers, with critical application status and technical data package requirements enforcing full adherence to all cited specifications.
Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details