Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Aluminum Shipping and Storage Container Manufacturing

Active

Federal

Response Deadline09/21/2026, 06:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the manufacture of aluminum shipping and storage containers for prime contractors supporting NAVSUP WSS projects. The work requires the fabrication of container shells according to Drawing 583E001 and MIL-I-45208, utilizing specialized custom fixtures, jigs, and dies. All deliverables must meet Buy American Act certifications and undergo thorough inspection prior to delivery. The project is managed under the Department of Defense through the Pa DLA Aviation At Philadelphia, with performance taking place in Mason. Compliance with IPC/EIAJ-STD-001C and NIST SP 800-171 for information systems is mandatory. The opportunity falls under NAICS code 332312, with a response deadline set for September 21, 2026.

General Info

Manufacture aluminum shipping containers for NAVSUP WSS projects by September 21, 2026.

Agency

Department Of Defense → Pa DLA Aviation At PhiladelphiaView Agency

NAICS

332312 - Fabricated Structural Metal ManufacturingView NAICS

Place of Performance

Mason, TN, USA

Set-Aside

NONE

Documents

This scope was carved out of SPRPA126RVC00.

The full solicitation package (7 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

SHIPPING AND STORAG

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 15

subcontract

Response DeadlineSep 21

Submission deadline

Response Deadline

09/21/2026, 06:00:00 PM UTCin 5 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Pa DLA Aviation At Philadelphia

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Pa DLA Aviation At Philadelphia

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufactures aluminum shipping and storage containers for prime contractors on NAVSUP WSS projects. Fabricates container shells per Drawing 583E001 and MIL-I-45208, utilizing custom fixtures, jigs, and dies. Ensures compliance with IPC/EIAJ-STD-001C and NIST SP 800-171 for information systems. Delivers completed, inspected aluminum containers meeting Buy American Act certifications.

Similar Contracts

Same NAICS industry code

ACE-0620-1199-00 Tower Design and Fabrication for Various RCAG/RTR Sites (TXK-A, GRI-B, and ARG)

Solicitation # ace-0620-1199-00-tower-design-fabrication-various-rcagrtr-sites-txk-gri-b-arg

This solicitation, issued by Parsons Corporation, seeks a qualified contractor for the design, fabrication, and delivery of towers at various RCAG/RTR sites located in Texas, Nebraska, and Arkansas, specifically targeting the TXK-A, GRI-B, and ARG locations. The selected offeror must be fully bonded and insured to perform the work under NAICS code 332312. The opportunity is set aside for various small business categories, including Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone Small Businesses, and Veteran-Owned Small Businesses. Interested parties must submit their responses by the deadline of September 25, 2026. Primary coordination for this project is managed by Thomas Sheehan.

Parsons Corporation

POSTED

about 4 hours ago

DEADLINE

Metal Bar Fabrication and Supply (NSN 005963578)This subcontract involves the fabrication and supply of manufactured metal bars under NSN 005963578 for prime contractors supporting DLA Distribution San Joaquin. The provider must utilize specialized metalworking machinery and alloy-specific materials to ensure all products adhere to ASTM A700 standards for special packaging codes Z and ZZ, while maintaining strict compliance with DFARS 252.225-7001 Buy American requirements. Every shipment must be accompanied by the finished metal bars and corresponding Mill-Material Certifications. The project is managed under NAICS code 332312 and is performed in Tracy, California. Interested parties must respond by September 28, 2026, to the Department of Defense agency.

DLA DIST SAN JOAQUIN

POSTED

about 15 hours ago

DEADLINE

Mounting Plate Fabrication and SupplyThis subcontract for Mounting Plate Fabrication and Supply, managed by the Department of Defense Land Supply Chain, requires the manufacture and delivery of metal mounting plates for prime contractors supporting DLA supply contracts. Performance will take place at Fort Drum, with fabrication utilizing CNC, stamping, or machining processes in strict accordance with the DLA Master List of Technical and Quality Requirements. The contractor must adhere to DFARS 252.225-7001 Buy American standards and comply with RP001 packaging and RQ011 identification requirements. Notably, additive manufacturing is prohibited for this project. Interested parties must submit responses by September 28, 2026, under NAICS code 332312.

LAND SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

Supply of Socket Head Cap Screws (NSN 5305017311211)This subcontract through the ASC Commodities Division of the Department of Defense involves the supply of 13 socket head cap screws, identified by NSN 5305017311211, for prime contractors supporting the Portsmouth Naval Shipyard. The contractor is required to adhere to the DLA Master List of Technical and Quality Requirements and must ensure all items are packaged and marked in strict accordance with MIL-STD-2073-1E, MIL-STD-129, and MIL-STD-130N. The performance of this contract takes place in Portsmouth, New Hampshire, under NAICS code 332312. The solicitation was posted on September 15, 2026, with a response deadline of September 23, 2026.

ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

Engine Fuel Tank FabricationThis subcontract for Engine Fuel Tank Fabrication supports the Department of Defense under the Land Supply Chain agency. The contractor is responsible for the fabrication, welding, and assembly of engine fuel tanks using precision forming tools and industrial welding equipment. All work must strictly adhere to the DLA Master List of Technical and Quality Requirements RA001 to ensure the delivery of compliant fuel tanks to prime contractors. The project is categorized under NAICS code 332312 and will be performed in Beaumont, Texas. The solicitation was posted on September 15, 2026, with a response deadline of September 28, 2026.

LAND SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

Supply of Hexagon Head Cap Screws (NSN 5305-12-181-8170)This subcontract with the Department of Defense ASC Commodities Division involves the supply of 1,040 Hexagon Head Cap Screws under NSN 5305-12-181-8170. The contractor is responsible for manufacturing or sourcing the screws in accordance with DIN 933 and Critical Application Item TDP Rev A Gen 1 specifications. All items must undergo sampling and inspection per MIL-STD-1916 or ASQ H1331 and must feature RQ017 bare item marking. The agreement requires strict adherence to the Buy American Act and DFARS 252.204-7012 compliance. Performance will take place in New Cumberland, Pennsylvania. The solicitation was posted on September 15, 2026, with a response deadline of September 23, 2026, falling under NAICS code 332312.

ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

Metal Bar Fabrication and SupplyThis subcontract for the Department of Defense involves the fabrication and supply of precision-cut metal bars for prime contractors on Jacksonville Bldg projects. The scope of work requires the production of bars with a 0.437 inch diameter and lengths ranging from 10 to 12 feet, adhering to a reference weight of 0.511 lb/ft. All deliverables must meet strict dimensional tolerances using precision cutting equipment and be delivered FOB Origin. Compliance with military standards is mandatory, specifically MIL-STD-129 for marking and MIL-STD-163 Packing Z for preservation and packing. The project is based in Jacksonville, Florida, under NAICS code 332312. The solicitation was posted on September 15, 2026, with a response deadline of September 28, 2026.

JACKSONVILLE BLDG

POSTED

about 15 hours ago

DEADLINE

Supply of Structural Channel (P/N 1051A-02-21)This subcontract involves the manufacture or procurement of one unit of a structural channel, specifically part number 1051A-02-21 from Isometrics Inc, to support prime contractors delivering DLA supply contracts. The project is managed under the Department of Defense through the Land Supplier Opns Vehicle Spt agency, with the place of performance located at Fort Bliss, Texas. The contractor is required to adhere to strict quality and logistics standards, ensuring all items are packaged according to ASTM D3951 and marked and labeled in compliance with MIL-STD-129. The opportunity was posted on September 15, 2026, with a response deadline of September 28, 2026, falling under NAICS code 332312.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 15 hours ago

DEADLINE

Marine Structural Metal Door SupplierThis subcontract with the Department of Defense Fluid Handling Division involves the supply of three specialized marine structural metal doors. The manufacturer must ensure all units meet NSN 2040015630195 specifications using marine-grade structural metal, with strict adherence to MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. The project falls under NAICS code 332312 and is designated for prime contractors. The response deadline for this requirement is September 28, 2026, with the place of performance located at FPO 09520.

FLUID HANDLING DIVISION

POSTED

about 15 hours ago

DEADLINE

Access Cover Fabrication and SupplyThis subcontract opportunity, titled Access Cover Fabrication and Supply, is issued by the Department of Defense Land Supply Chain for the manufacture and supply of metal access covers. The selected provider will fabricate covers using stamping, cutting, and welding equipment in strict accordance with the DLA Master List of Technical and Quality Requirements. All finished products must be packaged and marked according to MIL-STD-129 standards before delivery to prime contractors on Defense Logistics Agency supply contracts. The project is designated as a Total Small Business Set-Aside under NAICS code 332312, with performance located in New Cumberland. Interested parties must submit their responses by September 28, 2026.

LAND SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

Hoisting Beam FabricationThis subcontract involves the fabrication of a single hoisting beam for prime contractors supporting DLA Troop Support supply contracts. The manufacturer will utilize industrial grade steel and alloy to build the structure according to technical drawings for NSN 3940994506562, employing heavy duty welding and machining to adhere to approved source K7705 G420/4558/1 and standards RA001 and RD003. The project is managed by the Department of Defense under NAICS code 332312 and is designated as a Total Small Business Set-Aside. Performance will take place in New Cumberland, Pennsylvania. Interested parties must respond by September 28, 2026.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 15 hours ago

DEADLINE

Electrical Shield Plate Fabrication/ManufacturingThis subcontract involves the fabrication and manufacturing of electrical shield plates for the Department of Defense, specifically for the ASC Supplier Oper OEM Division. The contractor is responsible for producing these plates using precision machining or stamping equipment, utilizing conductive metals or specialized alloys. All production must adhere to strict quality control and inspection standards per FAR 52.246-2 and comply with FED-STD-313 for the identification of hazardous materials. The finished products are to be delivered to the DLA Distribution DDSP New Cumberland Facility in New Cumberland, Pennsylvania. This opportunity falls under NAICS code 332312 and was posted on September 15, 2026, with a response deadline of September 23, 2026.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 15 hours ago

DEADLINE

More opportunities from Department Of Defense → Pa DLA Aviation At Philadelphia

Same awarding agency

Desiccant Material SupplyThis subcontract opportunity with the Department of Defense, managed by the DLA Aviation at Philadelphia, involves the supply of specialized nondusting desiccant material for prime contractors working on NAVSUP WSS shipping container projects. The required material must strictly adhere to the MIL-D-3464, Type II specification, with the quantity calculated at one-third unit per cubic foot of the container interior volume. The contract allows for the delivery of the desiccant in either bulk or packaged forms and is categorized under NAICS code 325999. Performance will take place in Mason, and interested parties must submit their responses by September 21, 2026.

All Other Miscellaneous Chemical Product and Preparation Manufacturing

POSTED

about 20 hours ago

DEADLINE

SHIPPING AND STORAG

Solicitation # SPRPA126RVC00

This contract, issued by the Department of Defense through DLA Aviation at Philadelphia, solicits the supply of containers specified under drawing number 583E001, Revision Latest, manufactured from aluminum and requiring strict adherence to technical, quality, and inspection standards. The item must be produced in compliance with referenced specifications including MIL-I-45208, AWS welding codes for aluminum and steel, MIL-STD-130 for Unique Identification (UID) markings in data matrix format, and MIL-STD-2073 for packaging. Each container must be permanently marked with a UID serial number following the format “contract#_no_dashes-000X” and include a nameplate with the assigned alphanumeric sequence obtained from the designated government point of contact. Critical manufacturing controls include deoxidizing aluminum surfaces within strict timeframes prior to welding, prohibiting certain cleaning agents, mandating certified welders and documented weld procedures, and requiring glass bead blasting to a uniform matte finish using designated media and pressure parameters. All welding must be documented and inspected visually at 5x magnification with potential additional non-destructive testing as directed. The contract imposes rigorous First Article Test (FAT) requirements, mandating that the contractor submit one unit to approved government test facilities in Lakehurst and Picatinny, with all associated shipping, handling, and repair costs borne by the contractor. The FAT includes a 18-inch free-fall drop test, initial and final leak tests using 1.0 ± 0.05 PSIG pressure monitored for 30 minutes (rejecting any loss exceeding 0.05 PSIG), dimensional inspection against the drawing, form and fit verification with an end item provided by the government, and compliance checks with all technical specifications. The offeror must certify that production will occur in the same facility used for the FAT, and failure to deliver or approval of the FAT can result in contract default. Waivers to the FAT requirement may be granted only to previously approved suppliers who can prove identical prior production occurred within the last three years at the same facility with no deviations or rejections. All containers must include one-third cubic foot of non-dusting desiccant per interior volume and sealed crevices using approved sealing compound. The Buy American Act and other federal compliance standards apply, and the contract closing date has been extended to August 17, 2026.

General Warehousing and Storage

POSTED

about 20 hours ago

DEADLINE

16--PNL ASSY,FUEL MGMT

Solicitation # SPRPA126QYD05

This solicitation, numbered SPRPA126QYD05, is issued by the Department of Defense through the DLA Aviation office in Philadelphia for the procurement of fuel management panel assemblies. The project falls under NAICS code 336413 and is managed by the Office of Pa DLA Aviation. Interested parties must submit their responses by the deadline of October 13, 2026. The contract includes several critical regulatory requirements, including Item Unique Identification and Valuation, Buy American and Free Trade Agreement certifications, and specific security prohibitions and exclusions. It also mandates the use of the Workflow Pro MOD Assist module and adheres to equal opportunity standards for workers with disabilities. Priority ratings for national defense and emergency preparedness are applicable to this requirement.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

58--V/UHF AIU EXTENDED

Solicitation # SPRPA126QWC01

This solicitation, numbered SPRPA126QWC01, is issued by the Department of Defense through the DLA Aviation office in Philadelphia for the procurement of 58--V/UHF AIU Extended components. Classified as a Critical Application Item and issued under Emergency Acquisition Flexibilities, the requirement mandates that offers be submitted by government-approved sources of supply. Distributors must provide an authorized distributor letter on the source's letterhead to be considered technically acceptable. The procurement process requires the use of Wide Area Workflow for combined invoice and receiving reports and the Workflow Pro Mod Assist module. Compliance with the Buy American-Free Trade Agreements and Balance of Payments Program is required, along with adherence to equal opportunity standards for veterans and workers with disabilities. The response deadline for this solicitation is September 28, 2026, with the primary point of contact being Joseph Gambino.

Other Communications Equipment Manufacturing

POSTED

DEADLINE

NRP,HOUSING ASSY VA

Solicitation # SPRPA126QZC15

This solicitation, issued by the Department of Defense via the DLA Aviation office in Philadelphia, is for the procurement of a Housing Assembly VA under solicitation number SPRPA126QZC15. The contract is a fixed-price agreement that emphasizes strict adherence to government-approved source requirements due to the flight-critical nature of the part and the necessity of maintaining specific engineering and quality standards. Offerors must be approved sources or provide comprehensive documentation for source approval through NAVSUP WSS to be considered eligible for award. Key requirements include the submission of authorized distributor letters on official letterhead and a documented acceptable level of past performance in SPRS or FAPIIS. The solicitation is issued under Emergency Acquisition Flexibilities and incorporates various federal regulations, including the Buy American Act and specific security prohibitions. Proposals must be submitted by October 13, 2026, and all payments will be processed through the Wide Area Workflow system.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

16--CONTROL PANEL,AIRCR

Solicitation # SPRPA126RWB97

This solicitation is for the procurement of aircraft control panels, designated as Critical Application Items. The contract mandates strict adherence to quality control standards, requiring the contractor to maintain a system compliant with ISO 9000, 9001, 9002, or equivalent military standards. Key requirements include the implementation of a Repair Quality Plan, rigorous receiving inspections for purchased materials, and the maintenance of detailed historical record files for each serial number. While the contractor is granted Internal Review Board authority for minor non-conformances and rework, the government retains formal Material Review Board authority for as-is dispositions. The procurement is restricted to government-approved sources of supply, and distributors must provide authorized distributor letters to be considered technically acceptable. Compliance with the Buy American Act and various security prohibitions is required, and all markings must follow MIL-STD-130. The government reserves the right to conduct repair assessment testing on randomly selected items to ensure quality conformance. This solicitation is managed by the DLA Aviation office in Philadelphia with a response deadline of September 29, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

58--TERMINAL,SATELLITE

Solicitation # SPRPA126QWC00

This solicitation, issued by the Department of Defense through the DLA Aviation office in Philadelphia, is for the procurement of satellite terminals under solicitation number SPRPA126QWC00. The requirement is classified as a Critical Application Item, meaning it is essential for operational success. The procurement process is governed by NAICS code 334290 and includes strict compliance with Buy American and Balance of Payments programs, as well as specific security prohibitions and equal opportunity mandates for veterans and individuals with disabilities. Prospective bidders must submit their proposals by September 28, 2026. A critical requirement for eligibility is that offers must originate from government-approved sources of supply; any distributors must provide an authorized distributor letter on the source's letterhead at the time of submission. Failure to provide this documentation or submitting from an unapproved source will result in a technical unacceptable rating and ineligibility for the award. Payment and reporting will be managed via the Wide Area Workflow system.

Other Communications Equipment Manufacturing

POSTED

DEADLINE

81--CONTAINER,SHIPPING

Solicitation # SPRPA126RVC30

This solicitation is for the procurement of aluminum shipping containers, specifically part number 20140, to be manufactured according to Champion Company drawings. The contract is being extended to October 13, 2026, to promote competition. Key technical requirements include the use of specific weld fillers for 6061 and 5000 series aluminum, adherence to AWS welding standards, and the application of an electrodeposited alkaline Zinc-Nickel Alloy finish. Each container must feature a Unique Identification marking on a nameplate and include a specific amount of desiccant based on interior volume. A critical component of this contract is the First Article Testing (FAT) process, which includes dimensional inspections, a form and fit check with a T408-GE-400 engine, and a rigorous 18-inch free-fall drop test followed by pneumatic leak testing. New manufacturers may be subject to pre-award surveys and post-award conferences. While the government estimates first article testing costs at 12,000 dollars, all costs associated with the submission and shipment of FAT samples are the responsibility of the contractor. The contract also specifies strict chemical deoxidizing and mechanical cleaning procedures to be performed immediately prior to welding.

Other Metal Container Manufacturing

POSTED

DEADLINE

81--SHIPPING AND STORAG

Solicitation # SPRPA126RVC10

This solicitation from the DLA Aviation office in Philadelphia is for the manufacture and delivery of aluminum containers according to drawing 875E001. The contract emphasizes strict quality control, requiring adherence to AWS welding standards and specific chemical deoxidizing and cleaning processes to prevent corrosion. Key technical requirements include the use of specific desiccant amounts, the application of Zinc-Nickel Alloy finishing instead of cadmium plating, and the installation of approved shock mounts. Each unit must feature a Unique Identification marking and follow a specific serial number convention. The agreement mandates a rigorous First Article Testing process, including dimensional inspections, a form and fit check, and a series of leak and 18-inch free-fall drop tests. All production units are also subject to a 100% production leak test following a drop test to ensure structural integrity. Contractors must provide their own tooling and manufacturing aids, and new manufacturers may be subject to pre-award surveys and post-award conferences due to the critical nature of the items.

Other Metal Container Manufacturing

POSTED

DEADLINE

16--PUMP,WINDOW WASHER

Solicitation # SPRPA126QUB47

This solicitation, issued by the Department of Defense via DLA Aviation in Philadelphia, is for the procurement of window washer pumps under solicitation number SPRPA126QUB47. The closing date for responses is September 30, 2026. This requirement is issued under EAF authority and is specifically for non-CLSSA Foreign Military Sales, meaning the assets will be owned by customer countries rather than the U.S. Government. Consequently, standard Item Unique Identification and Valuation requirements are waived. Eligible suppliers must be government-approved sources providing newly manufactured spares; refurbished or repaired materials are strictly prohibited. All parts must be FAA-certified and accompanied by an FAA Form 8130-3 Airworthy Approval Tag. Quality requirements include adherence to AS/EN/JISQ 9100 or an equivalent standard. Authorized distributors must provide a formal distributor letter on the source's letterhead at the time of proposal submission to be considered technically acceptable.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

15--DOOR,ACCESS,AIRCRAF

Solicitation # SPRPA126QUC06

This solicitation, issued by the DLA Aviation office in Philadelphia, is for the procurement of two aircraft access doors under contract NSN 7R-1560-017005796-P8. The acquisition is conducted as a commercial item procurement under FAR Part 12, requiring that all components be newly manufactured spares; refurbished or repaired materials are strictly prohibited. Delivery is set as FOB Origin, and the items must meet all government form, fit, and function requirements. Eligible offerors must be government-approved sources of supply or provide an authorized distributor letter. A critical requirement for award is the provision of an FAA Form 8130-3 Authorized Release Certificate to certify airworthiness and traceability from the original manufacturer. Vendors must provide documentation supporting the commerciality of the items, a standard commercial warranty, and full supply chain traceability. IUID is not required for these items as they are captured under the parent end item in the DoD registry.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

in about 1 month

16--FIRE CONTROL PANEL

Solicitation # SPRPA126QUC04

This solicitation, issued by the Department of Defense via the DLA Aviation office in Philadelphia, is for the procurement of two aircraft fire control panels under NSN 7R-1680-016679280-P8. The items are classified as commercial products and must be newly manufactured spares; refurbished, remanufactured, or repaired materials are strictly prohibited. Delivery is set as FOB Origin, and the acquisition is governed by FAR Part 12 and applicable DFARS regulations. Eligible offerors must be government-approved sources of supply or provide an authorized distributor letter. A critical requirement for award is the provision of an FAA Form 8130-3 Authorized Release Certificate to certify airworthiness and traceability from the original manufacturer. Vendors must provide documentation supporting the commerciality of the items, including technical specifications and sales history, and ensure the components meet all form, fit, and function requirements. A standard commercial warranty covering workmanship and replacement parts is required.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

in about 1 month

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS