This Government Contract opportunity from Department Of Justice was posted on May 24, 2010. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Contract Sewing Equipment Parts award

Awarded

CT1950-09Federal

Submission Closed05/03/2010, 12:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 333298

Federal

Visible range continuous wave tunable laserThe Department of Commerce is forecasting the procurement of a high-power, single-frequency, continuous wave laser system to support the Nano Spectroscopy Group's research into color center science. This equipment is essential for measuring photoelectrically and optically detected magnetic resonance in diamond as part of the SI-Traceable Vector Magnetometry for Secure Navigation initiative. The required system must be mode hop free and provide gap-free tunable wavelengths across four specific spectral regions: 450-525 nm, 540-650 nm, 900-1050 nm, and 1080-1300 nm, with a power output exceeding 200 mW. The laser will be utilized for photoluminescence and photoelectric spectroscopic studies of semiconductors and diamond under various temperatures and magnetic or electric fields. To ensure operational success, the system must be fully compatible with existing electronic and spectroscopic infrastructure. The performance of this contract will take place in Gaithersburg, and the procurement is categorized under NAICS code 333298.

POSTED

DEADLINE

Zero-Gravity Compatible 3D Print Module Design & FabricationThe NASA SBIR/STTR Program has issued a subcontract for the design and fabrication of a space-qualified 3D print module specifically engineered for manufacturing nanocarbon-infused metals in low Earth orbit. This project requires the comprehensive integration of mechanical, thermal, and electrical systems to ensure functionality in a zero-gravity environment. The contract is designated as a Total Small Business Set-Aside, restricted to firms with fewer than 500 employees. Performance for this initiative is centered in Huntsville, Alabama, under NAICS code 333298.

NASA SBIR/STTR Program

POSTED

DEADLINE

Kitchen Module – Appliance SuiteThis subcontract, managed by the Defense Logistics Agency under the Department of Defense, involves the supply of complete kitchen module appliance suites designed for field deployment. Categorized under NAICS code 333298, the agreement focuses on providing essential culinary equipment necessary for operational readiness in deployed environments. The contract was posted on June 30, 2026, and is tracked via the DIBBS system. It establishes the requirements for delivering specialized appliance suites that meet the rigorous standards of military field operations to support the agency's logistical and sustainment goals.

Defense Logistics Agency

POSTED

DEADLINE

Tray Ration Heater (TRH) Systems SupplyThis subcontract, managed by the Defense Logistics Agency under the Department of Defense, involves the supply of complete Tray Ration Heater Systems along with all necessary collateral equipment. These systems are specifically designed to support field kitchen operations, ensuring the capability to heat rations in tactical or remote environments. The agreement is categorized under NAICS code 333298 and was posted on June 30, 2026. It functions as a procurement effort to maintain essential food service infrastructure for military personnel through the delivery of specialized heating hardware.

Defense Logistics Agency

POSTED

DEADLINE

Visible range continuous wave tunable laserThe Department of Commerce, through the AD for Laboratory Programs, is forecasting the procurement of a high-power, single-frequency, continuous wave laser system to support the Nano Spectroscopy Group. This equipment is essential for research into color center science and the measurement of photoelectrically and optically detected magnetic resonance in diamond, contributing to the SI-Traceable Vector Magnetometry for Secure Navigation initiative. The required system must be mode hop free, provide a power output exceeding 200 mW, and offer gap-free tunability across four specific spectral regions: 450-525 nm, 540-650 nm, 900-1050 nm, and 1080-1300 nm. The laser will be utilized for photoluminescence and photoelectric spectroscopic studies of semiconductors and diamond under various temperatures and magnetic or electric fields. To ensure operational success, the system must be fully compatible with existing electronic and spectroscopic infrastructure. The performance of this contract will take place in Gaithersburg, Maryland, under NAICS code 333298.

AD for Laboratory Programs

POSTED

7 months ago

DEADLINE

N/A

AI Contract Overview

Solicitation CT1950-09, issued by the Department of Justice Federal Prison Industries (UNICOR), is a Total Small Business Set-Aside for a five-year Indefinite Delivery Indefinite Quantity (IDIQ) contract. The project focuses on the procurement of sewing machine parts for industrial textile machinery, including brands such as Brother, Juki, and Adler, and requires the development of a web-based ordering system featuring exploded parts diagrams. The contract carries a guaranteed minimum value of 1,000,000 dollars and a maximum ceiling of 7,500,000 dollars. Key operational requirements include a seven-day delivery lead time for specific items and the submission of priced lists for high-mortality parts. The evaluation process prioritizes past performance, followed by the proposed management plan and price. Bidders are required to provide three past performance references and a DUNS number. Throughout the solicitation process, several amendments were issued to extend submission deadlines, provide clarifications via Q&A documents, and update economic price adjustment policies to align with FAR 52.216-2. The contract encompasses a wide range of equipment including sergers, fusers, and heat seal machines across various UNICOR factory locations nationwide.

General Info

Agency

Department Of Justice → Inc Federal Prison Industries

Contract Value

NAICS

333298 - All Other Industrial Machinery Manufacturing

Place of Performance

DC, USA

Set-Aside

NONE

Awardee

ARCH SEWING MACHINE CO INC

Award Issued Date

05/01/2010, 12:00:00 AM UTC

Documents

Amendment AMD001 to Solicitation CT1950-09

amendment

High

Amendment AMD002 to Solicitation CT1950-09

amendment

High

Amendment AMD003 to Solicitation CT1950-09

amendment

High

Cover Letter for RFP CT1950-09 - Sewing Machine Parts

1 page · presolicitation

High

Machines Sub Classes Inventory List

10 pages · specifications

High

Solicitation CT1950-09: Sewing Machine Parts Project

rfp

High

Federal Prison Industries Factories and Locations List

other

Low

Q&A # 2 for CT1950-09

q-and-a

Low

Q&A for CT1950-09 (August 4, 2009)

1 page · q-and-a

Low

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

4 updates

PhaseAwarded

PostedMay 29

Presolicitation

Notice updatedJun 5

The notice description changed. The point of contact changed.

Notice updatedAug 4

Notice details unchanged. Attachments may have changed.

Notice updatedAug 14

Notice details unchanged. Attachments may have changed.

Notice updatedSep 2

The notice title changed. The notice description changed. The point of contact changed.

AwardedMay 1

Contract was awarded

Submission Closed

05/03/2010, 12:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Justice → Inc Federal Prison Industries

Contacts2 people available

OfficeWASHINGTON, DC, 20534, USA

Organization / AgencyDepartment Of Justice → Inc Federal Prison Industries

Office AddressWASHINGTON, DC, 20534, USA

Contacts

Michael S. BoucherContracting Officer

contact@example.gov

+1 (555) 000-0000

Freida E. McClainSupervisory Contracting Officer

contact@example.gov

+1 (555) 000-0000

Full Description

Q&A

More opportunities from Department Of Justice → Inc Federal Prison Industries

Same awarding agency

NAICS: 337211

New

Federal

ComponentsThe Department of Justice, specifically through Federal Prison Industries, has issued a forecast for a contract regarding components. This opportunity is designated as a Small Business Total Set-aside under NAICS code 337211. The forecast was posted on October 18, 2026, and is intended to solicit capabilities from qualified small business entities. Interested parties can coordinate with Stacey Phipps or Small Business Specialist Robert L. Connolly for further information. Additional details regarding this contracting opportunity are available through the Department of Justice forecast portal.

Wood Office Furniture Manufacturing

POSTED

DEADLINE

HARDWAREThis forecast for hardware procurement is issued by Federal Prison Industries under the Department of Justice. The project is designated as a Small Business Total Set-aside and is categorized under NAICS code 332510. Performance for this contract is expected to take place in Baltimore, Maryland. The opportunity was posted on October 18, 2026. Interested parties can coordinate with Stacey Phipps as the primary point of contact or Robert L. Connolly, who serves as the Small Business Specialist. Further details regarding this contracting opportunity are available through the Department of Justice forecast portal.

Hardware Manufacturing

POSTED

DEADLINE

Admin KitsThe Department of Justice, through Federal Prison Industries, has issued a forecast for the procurement of Admin Kits under NAICS code 325620. This opportunity is designated as Full and Open/Unrestricted, meaning it is available to all qualified bidders regardless of business size or socioeconomic status. The performance of the contract is slated to take place in Bryan, Texas. The forecast was posted on October 18, 2026, and lists Kimberly Armfield as the primary point of contact, with Robert L. Connolly serving as the Small Business Specialist. Interested parties can find further details regarding this contracting opportunity through the Department of Justice forecast portal.

Toilet Preparation Manufacturing

POSTED

DEADLINE

Berry Compliant Heat Transfer LabelsThis subcontract involves the manufacture and supply of blank, white, woven heat transfer labels for prime contractors serving the Department of Justice via Federal Prison Industries. The labels must be produced from 100% polyester fabric measuring 1 inch by 3 1/4 inches, strictly adhering to MIL-DTL-32075 Type VI specifications. The contractor is responsible for delivering approximately 500,000 labels annually to the Jesup Cut and Sew factory in Georgia. Critical compliance requirements include adherence to the Berry Amendment and the provision of Certificates of Conformance for all supplied materials.

Commercial Printing (except Screen and Books)

POSTED

DEADLINE

Solicitation # CT2399-27

Federal Prison Industries under the Department of Justice is issuing a Request for Information under solicitation number CT2399-27 to identify potential sources for heat transfer labels. The labels are intended for use at the Jesup Cut and Sew factory located in Jesup, Georgia. To be considered, products must conform to MIL-DTL-32075 Type VI technical specifications and be Berry Compliant, with Certificates of Conformance required. This action is categorized under NAICS code 313220 and is not a formal solicitation for award, nor does it obligate the government to issue a future contract. Interested respondents must submit their information to Harley Jacobson by October 23, 2026. Submissions should include the company name, Unique Entity Identifier, business size, technical capabilities, relevant experience, estimated unit pricing, minimum order quantities, and lead times. Any proprietary information must be clearly identified, and vendors are cautioned against submitting classified or sensitive information through unauthorized methods.

Narrow Fabric Mills and Schiffli Machine Embroidery

POSTED

DEADLINE

Solicitation # SV0100-27

Solicitation SV0100-27 is a total small business set-aside IDIQ contract issued by Federal Prison Industries, operating as UNICOR under the Department of Justice. The contract seeks the procurement of safety eyewear kits, provided as loose components for assembly at the agency's location in Butner, North Carolina. Key deliverables include various safety glasses and industrial goggles, such as aviator style goggles, welder's eyecup goggles, and replacement IR lenses, all of which must comply with ANSI/ISEA Z87.1-2025 standards. The contract has a guaranteed minimum value of 10,000 dollars, with a total estimated value of 962,039.50 dollars. Award decisions will be based on the most advantageous offer, with evaluation factors prioritized by technical capability, delivery capability and schedule compliance, price reasonableness, and past performance. Successful offerors must provide an Original Equipment Manufacturer Certificate of Conformance with every shipment and adhere to strict packaging requirements, including labeling components with UNICOR part numbers. Delivery is required within 60 days for the initial order and 30 days for subsequent orders after December 1, 2026. Additionally, the contract mandates strict adherence to cybersecurity and privacy training for all personnel accessing Department of Justice information and prohibits the use of products originating from China.

Ophthalmic Goods Manufacturing

POSTED

DEADLINE

Solicitation # SV0236-26

Federal Prison Industries, known as UNICOR, is soliciting proposals under RFP SV0236-26 for the procurement of individual commercial hygiene products to support kit manufacturing. This is an unrestricted, open-market acquisition under NAICS code 325620. The resulting contract will be a firm-fixed-price, indefinite delivery/indefinite quantity (IDIQ) agreement with Economic Price Adjustment. The performance period consists of one base year and two option years, with a potential six-month extension, and an anticipated award date of December 14, 2026. Items will be awarded individually, and the government may utilize multiple awardees. Deliveries are to be made to the UNICOR warehouse at Federal Prison Camp in Bryan, Texas, with a required 30-calendar-day delivery window from the issuance of each delivery order. Awarded contractors must operate a Vendor-Managed Inventory (VMI) system at a U.S.-based location and follow First-In-First-Out stock rotation. Technical requirements include strict adherence to FDA Class II medical device standards for specific items, including 510(k) premarket notification and Toxic Shock Syndrome labeling, as well as ADA acceptance for toothpaste. Packaging must comply with ASTM D-3951-95 and include a Certificate of Conformance for payment processing. The government will award based on best value, weighing price approximately equal to non-price factors. Evaluation criteria include domestic content superiority, technical approach, and past performance. Proposals must be submitted electronically to the contracting officer by October 27, 2026, and must include a VMI plan, a subcontracting plan for large businesses, and at least three business management questionnaires. Offerors who have not supplied the exact products to UNICOR within the last 12 months are required to submit physical samples to the Bryan, Texas facility by the proposal deadline.

Toilet Preparation Manufacturing

POSTED

DEADLINE

Vehicle Recompete: FOOTWEAR — INDEFINITE DELIVERY / INDEFINITE QUANTITY SV0163-25This indefinite delivery and indefinite quantity contract for footwear is managed by Federal Prison Industries / Unicor under the Department of Justice. The vehicle, identified as SV0163-25, is classified as a full recompete with an ordering period that extends through April 8, 2028. Currently, there are 44 active task orders with a combined total value of 1,223,342.95 dollars. Three companies hold orders under this vehicle, with Bob Barker Company, Inc. as the primary provider holding 23 orders valued at 668,683.50 dollars. Bull Run Boots, Limited follows with 17 orders totaling 487,184 dollars, while Victory Supply, LLC holds four orders valued at 67,475.45 dollars. The highest individual task orders range from approximately 51,588 dollars to 76,636.21 dollars.

Footwear Manufacturing

POSTED

DEADLINE

MetalsThis forecast issued by Federal Prison Industries under the Department of Justice concerns the procurement of various metals for metal factories. Classified as a full and open unrestricted competition under NAICS code 331110, the opportunity is intended to support industrial metalworking operations. The solicitation is managed by the Department of Justice, with Stacey Phipps serving as the primary point of contact and Robert L. Connolly acting as the Small Business Specialist. Interested parties can find further details regarding this contracting opportunity through the official Department of Justice forecast portal.

Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

DEADLINE

Wood PanelsThis forecast issued by Federal Prison Industries under the Department of Justice concerns the procurement of wood panels. The project is categorized under NAICS code 321211 and is designated as a full and open unrestricted competition. The intended place of performance for this contract is located in Forrest City, Arkansas. The opportunity was posted on October 4, 2026. Interested parties may coordinate with Stacey Phipps as the primary point of contact or Robert L. Connolly, who serves as the Small Business Specialist. Further details regarding this contracting opportunity can be found through the Department of Justice forecast portal.

Hardwood Veneer and Plywood Manufacturing

POSTED

DEADLINE

HARDWAREThis forecast for hardware procurement is issued by Federal Prison Industries under the Department of Justice. The opportunity is designated as a Small Business Total Set-aside and is categorized under NAICS code 332722. The place of performance for this contract is located in Brooklyn, New York. The solicitation was posted on October 4, 2026. Interested parties may coordinate with Stacey Phipps or Small Business Specialist Robert L. Connolly for further information. Additional details regarding this contracting opportunity can be found through the Department of Justice forecast portal.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

LeatherThis forecast opportunity is issued by Federal Prison Industries under the Department of Justice for leather upholstery services. Classified under NAICS code 316110, the procurement is designated as a Small Business Total Set-aside, ensuring that the opportunity is reserved exclusively for small business concerns. The notice was posted on October 4, 2026, and directs interested parties to the Department of Justice forecast contracting opportunities page for further details. Primary points of contact for this requirement include Stacey Phipps and Small Business Specialist Robert L. Connolly.

Leather and Hide Tanning and Finishing

POSTED

17 days ago

DEADLINE

N/A

View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS