Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Ammunition Performance and First Article Testing (FAT)

Active

Federal

Response Deadline11/25/2026, 08:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract, titled Ammunition Performance and First Article Testing (FAT), involves providing independent laboratory testing services for prime contractors working on U.S. Army Contracting Command - Rock Island projects. The scope of work focuses on validating bid samples and production lots for velocity, dispersion, and accuracy through the use of chronographs and ballistic ranges. The contractor must ensure full compatibility with conversion kits for M4, M9, M11, M17, and M18 systems in strict accordance with MIL-A-70625 and MIL-STD-882 standards. Key deliverables for this engagement include the provision of First Article Testing reports and Lot Acceptance Testing certifications. The opportunity is managed under the Department of Defense via the W6QK Acc-Ri-Picatinny agency with a response deadline of November 25, 2026.

General Info

Independent laboratory testing for US Army ammunition performance and first article testing services.

Agency

Department Of Defense → W6QK Acc-Ri-Picatinny

NAICS

541380 - Testing Laboratories and Services

Place of Performance

NJ

Set-Aside

NONE

Documents

This scope was carved out of W15QKN27RA009.

The full solicitation package (16 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

9mm M1041 Close Combat Mission Capability Kit (CCMCK)

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 14

subcontract

Response DeadlineNov 25

Submission deadline

Response Deadline

11/25/2026, 08:00:00 PM UTCin about 1 month

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → W6QK Acc-Ri-Picatinny

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → W6QK Acc-Ri-Picatinny

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs independent laboratory testing for prime contractors on U.S. Army Contracting Command - Rock Island projects. Validates bid samples and production lots for accuracy, dispersion, and velocity using ballistic ranges and chronographs. Ensures compatibility with M4, M9, M11, M17, and M18 conversion kits per MIL-A-70625 and MIL-STD-882. Delivers FAT Reports and LAT certifications.

Similar Contracts

Same NAICS industry code

Joliet Job Corps-Request for Quote Asbestos Testing & Abatement

Solicitation # Joliet JCC Asbestos Testing & Abatement

Management & Training Corporation is seeking quotes for a fee-for-service subcontract to provide asbestos testing and abatement services at the Joliet Job Corps center in Joliet, Illinois. The scope of work includes sampling and laboratory analysis of ceiling tiles in the Administration Academic Building and Welcome Center, as well as testing and potential removal of asbestos-containing material floor tiles in the warehouse and storage areas, totaling approximately 3,600 square feet. All activities must be performed by licensed professionals using accredited laboratories and must comply with federal, State of Illinois, OSHA, and EPA regulations. Key deliverables include a sampling plan, waste shipment records, disposal manifests, and a final project completion report. This opportunity is set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certified firms, under NAICS code 541380. Interested bidders must submit a bid sheet, a completed supplier packet containing a W-9 and self-certification, proof of insurance, and three references for similar projects by October 21, 2026. Award will be based on best value as determined by MTC. The contract is subject to Service Contract Labor Standards, specifically Wage Determination No. 2015-5019 Rev. 31, and includes various FAR clauses regarding equal opportunity, minimum wages, and the protection of sensitive government information. Invoicing is to be submitted on a weekly or bi-weekly basis.

Joliet Job Corps

POSTED

about 3 hours ago

DEADLINE

Quality Assurance & Certification ServicesThis subcontract for Quality Assurance and Certification Services supports prime contractors on DLA Weapons Support ASC projects within the Department of Defense. The scope of work focuses on independent verification and certification, specifically executing sampling and inspection plans according to MIL-STD-1916 and MIL-STD-105/ASQ Z1.4. The primary objective is to ensure zero non-conformance for critical application items while validating bare item marking and supply chain traceability. The contract requires the delivery of detailed inspection reports and Certificates of Conformance. It is designated as a Total Small Business Set-Aside under NAICS code 541380. Interested parties should note the response deadline of October 29, 2026, for this requirement managed by the DLA Weapons Support ASC Supplier Oper AE and AF Div.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 16 hours ago

DEADLINE

Specialized Testing & Quality AssuranceThis subcontract for Specialized Testing and Quality Assurance involves performing First Article Testing and Production Lot Testing for prime contractors under DLA Troop Support supply contracts. The scope of work requires the execution of tests using tensile strength and load cell equipment in strict accordance with SOP-PHST-077C, QAP 14153 SQAP-FAT3, and SQAP-PLT3. Additionally, the provider is responsible for certifying Critical Application Items per TECH SPEC PHST-077C and delivering the corresponding Test Reports and Certifications of Conformance. The project is managed under NAICS code 541380 for the Department of Defense, with the place of performance located in New Cumberland, Pennsylvania. Interested parties should note the response deadline of October 26, 2026, for this specialized quality assurance requirement.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 16 hours ago

DEADLINE

First Article Test (FAT) and Quality Validation ServicesThis subcontract for First Article Test and Quality Validation Services supports the DLA Weapons Support ASC Commodities Division in Jacksonville. The selected provider will perform technical testing and validation on first production units for prime contractors, specifically conducting First Article Tests to ensure dimensional accuracy and self-locking functionality through the use of precision measurement and metrology equipment. The final deliverables for this engagement include a validated sample and a formal FAT Certification or Test Report. To be eligible, contractors must maintain ISO 9001 or SAE AS9003 certification and ensure strict ITAR and EAR compliance via the US/Canada Joint Certification Program. The opportunity falls under NAICS code 541380, with a response deadline set for October 23, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

First Article Testing for Aircraft Universal JointsThis subcontract involves performing First Article Testing for aircraft universal joints on behalf of prime contractors for the DLA Weapons Support ASC Commodities Division. The scope of work requires the validation of one unit against Basic Drawing NR 98897 4C95010, utilizing certified Measuring and Test Equipment in accordance with requirement RT001. Due to the nature of the technical data involved, strict adherence to ITAR and EAR compliance is mandatory. The final deliverables include the tested unit and a comprehensive FAT validation report, both of which must be delivered to Robins AFB in Georgia. This project falls under NAICS code 541380 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

Independent Testing and Inspection for Critical Safety ItemsThis subcontract, titled Independent Testing and Inspection for Critical Safety Items, involves providing independent verification, pressure testing, and quality inspection services for prime contractors on DLA Weapons Support ASC fuel system projects. The scope of work includes conducting sampling according to MIL-STD-1916 or ASQ H1331 and verifying bare item marking per RQ017, utilizing calibrated M&TE in accordance with RT001. The selected provider is responsible for delivering comprehensive inspection reports, pressure test results, and Certificates of Conformance. Managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division, the performance of this contract will take place in Jacksonville, Florida. The opportunity is categorized under NAICS code 541380, with a response deadline set for October 23, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 16 hours ago

DEADLINE

Quality Assurance and Inspection Services for Aviation ImpellersThis subcontract for Quality Assurance and Inspection Services for Aviation Impellers supports the DLA Weapons Support Aviation Supply Chain. The selected provider will perform independent quality testing and inspection for prime contractors, utilizing precision measurement tools and CMM to validate technical requirements. Key responsibilities include conducting sampling and inspection according to MIL-STD-1916 or ASQ H1331, verifying physical identification per RQ017, and delivering final inspection reports and Certificates of Conformance. The project is located in Cherry Point, North Carolina, and falls under NAICS code 541380. To be eligible, contractors must hold AS9100 or ISO 9001 certification. The solicitation was posted on October 15, 2026, with a response deadline of October 23, 2026.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

Aerospace Component Inspection and TestingThe Aerospace Component Inspection and Testing subcontract involves providing specialized inspection and testing services for prime contractors supporting DLA Weapons Support ASC projects. The scope of work focuses on dimensional verification and non-destructive testing of critical application items, utilizing advanced tools such as CMM and ultrasonic or X-ray equipment. The contractor is responsible for executing zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331 standards, ensuring RT001 equipment compliance, and delivering all necessary inspection reports and certifications of conformance. This project is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, with performance taking place at Tinker AFB. The opportunity falls under NAICS code 541380. Interested parties should note the response deadline of October 23, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 16 hours ago

DEADLINE

Aerospace Component Testing and Quality AssuranceThe Aerospace Component Testing and Quality Assurance subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division, involves the independent testing, calibration, and quality certification of fluid-hydraulic pressure transducers. The selected provider will be responsible for verifying transducer accuracy and pressure ratings, ensuring compliance with FAA airworthiness standards, and validating Bare Item Marking per RQ046 using hydraulic pressure test benches. All work is to be performed at Tinker AFB, and the contractor must deliver comprehensive test reports and Certificates of Conformance. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 541380. To be eligible, the contractor must possess ISO 9001:2015 certification and FAA-recognized certification capabilities. The solicitation was posted on October 15, 2026, with a response deadline of October 23, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

Magnetic Particle Inspection Services for Aerospace FastenersThis subcontract for Magnetic Particle Inspection Services for Aerospace Fasteners involves performing specialized inspections on sleeve nuts for prime contractors supporting DLA supply contracts. The work must be executed in accordance with ASTM E1444 standards using either portable or wet/dry bench MPI equipment, specifically following the requirements outlined in Drawing Page 3 Frame 2 Note 4. Performance will take place in New Cumberland, Pennsylvania. To ensure quality and compliance, the service provider must operate out of an ISO 9001 or AS9003 certified facility and employ inspectors who hold NAS 410 certification. The primary deliverables for this engagement include the delivery of passed components along with their corresponding certified inspection reports. This opportunity is managed under the Department of Defense through the DLA Weapons Support ASC Commodities Division.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

Product Verification Testing (PVT) ServicesThis subcontract for Product Verification Testing services supports prime contractors delivering to the DLA Weapons Support Land Supply Chain. The scope of work involves performing both destructive and non-destructive testing on Lever Assembly samples, strictly adhering to the requirements outlined in Procurement Note E05. The successful provider must deliver comprehensive PVT test reports and certified samples to ensure compliance with quality standards. Due to the technical nature of the requirements, the contractor must possess specialized material testing equipment and maintain active ITAR registration to access necessary technical data. This opportunity is categorized under NAICS code 541380 and is managed by the Department of Defense. Interested parties must submit their responses by October 30, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

Aerospace Component Quality Validation & TestingThis subcontract for Aerospace Component Quality Validation and Testing involves performing Production Lot Testing for prime contractors under the DLA Weapons Support ASC Commodities Division. The primary objective is to validate the quality conformance of aerospace rivets by testing random samples against Technical Data Package tolerances. The selected provider will be responsible for coordinating with Government Quality Assurance Representatives and delivering essential documentation, including test reports, material and process certifications, and DD Form 1423. The work is to be performed at Tinker AFB and requires the contractor to maintain ISO 9001:2015 and JCP certifications. This opportunity falls under NAICS code 541380, with a response deadline set for October 23, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

More opportunities from Department Of Defense → W6QK Acc-Ri-Picatinny

Same awarding agency

Solicitation # W15QKN27A1CSD

Explosives Manufacturing

POSTED

about 21 hours ago

DEADLINE

in about 1 month

M2A2 Ammunition Container SupplyThis subcontract involves the manufacture and distribution of M2A2 ammunition containers for prime contractors supporting U.S. Army Contracting Command - Rock Island projects. The scope of work requires the provision of military-spec polymer or metal containers designed for the secure transport of 9mm cartridges, ensuring all products adhere strictly to military packaging specifications and are delivered directly to the prime facility. Managed under the Department of Defense through the W6QK Acc-Ri-Picatinny agency, the opportunity is categorized under NAICS code 326199. The solicitation was posted on October 14, 2026, with a response deadline set for November 25, 2026.

All Other Plastics Product Manufacturing

POSTED

DEADLINE

in about 1 month

MIL-DTL-46506 Wire-bound Wooden Box SupplyThis subcontract involves the manufacture and supply of heat-treated, wire-bound wooden ammunition packing boxes for prime contractors supporting U.S. Army Contracting Command - Rock Island projects. The Department of Defense requires all boxes to be produced in accordance with MIL-DTL-46506 and ISPM 15 standards, utilizing specialized heat-treatment facilities and wire-binding equipment. The selected provider is responsible for the delivery of the finished products directly to the prime contractor's facility. The opportunity is categorized under NAICS code 321999 and is managed by the W6QK Acc-Ri-Picatinny agency. Interested parties must submit their responses by the deadline of November 25, 2026.

All Other Miscellaneous Wood Product Manufacturing

POSTED

DEADLINE

in about 1 month

9mm M1041 Marking Ammunition Component SupplyThis subcontract, titled 9mm M1041 Marking Ammunition Component Supply, involves the manufacture and delivery of raw components for prime contractors supporting U.S. Army Contracting Command - Rock Island ammunition projects. The scope of work includes the production of brass cases, primers, propellant, and both blue and red marking dye projectiles. All supplied materials must strictly adhere to MIL-PRF-32312 and Drawing 13008817 specifications, ensuring compatibility with Close Combat Mission Capability Kit tolerances. The Department of Defense requires the performing entity to maintain ISO 9001:2015 certification to ensure quality standards for these bulk shipments. This opportunity falls under NAICS code 332992 and is managed by the W6QK Acc-Ri-Picatinny agency. Interested parties must submit their responses by the deadline of November 25, 2026.

Small Arms Ammunition Manufacturing

POSTED

DEADLINE

in about 1 month

9mm M1041 Close Combat Mission Capability Kit (CCMCK)

Solicitation # W15QKN27RA009

Solicitation W15QKN27RA009 is an Indefinite Delivery Indefinite Quantity (ID/IQ) contract issued by the U.S. Army Contracting Command - Rock Island at Picatinny for the manufacturing, testing, packaging, and delivery of 9mm M1041 Marking Ammunition Cartridges. These cartridges must be produced according to Military performance Specification MIL-PRF-32312 and Drawing Number 13008817 for use with the Close Combat Mission Capability Kit (CCMCK) weapon conversion systems for the M4 Carbine and M9, M11, M17, and M18 pistols. The contract is structured with five 12-month ordering periods, requiring the contractor to maintain a monthly combined production rate of 500,000 cartridges. Delivery is FOB Origin, with transportation costs paid by the government. The government intends to make a single award based on a best-value assessment, prioritizing the Technical Factor—specifically the Bid Sample Test—above Past Performance, Price, and Small Business Participation. Technical requirements include compliance with ISO 9001:2015 and strict packaging standards involving M2A2 containers and heat-treated wirebound wooden boxes per ISPM 15. Security and cybersecurity compliance are critical, requiring Level 2 CMMC certification via self-assessment prior to award and third-party certification by November 20, 2026. Inspection and acceptance will occur at the contractor's facility and at the destination, contingent upon the successful completion of First Article Testing.

Small Arms Ammunition Manufacturing

POSTED

DEADLINE

in about 1 month

Shank 2.0 payload, training warhead, and pre-packed anti-personnel warhead

Solicitation # W15QKN-26-X-1CFG

The U.S. Army Contracting Command-Rock Island at Picatinny is conducting market research via a sources sought notice to identify capable industry partners for the production of the Government-developed Shank 2.0 payload, training warheads, and pre-packed anti-personnel warheads for small Unmanned Aerial System platforms. The project requires the manufacture of platform-agnostic payloads utilizing High Voltage Electronic Safe and Arm Device initiation systems, compatible with Low Energy Exploding Foil Initiator or shock tube initiation chains. Training warheads must match the form and weight of live versions using LED simulation, while live warheads must feature qualified high-blast explosives and steel fragmentation packs. All products must integrate with Picatinny CLIK and small Universal Payload Interface design standards. The government is seeking industry capabilities and recommendations to improve the Technical Data Package for producibility, with a specific focus on the ability to scale production to approximately 40,000 systems per month to enhance battlefield effectiveness by 2027. Interested respondents must provide a capabilities statement, Rough Order of Magnitude pricing, and a ramp-up schedule. Due to the nature of the technology, respondents must possess a facility clearance to handle classified material and adhere to strict export control regulations, including the Arms Export Control Act. Required documentation for Technical Data Package access includes DD Form 2345, FCDDAC Form 1350, and a Non-disclosure and Non-Use Agreement. All small business set-aside categories will be considered for this effort.

Small Arms Ammunition Manufacturing

POSTED

DEADLINE

Vehicle Recompete: THIS PROCUREMENT IS FOR THE MANUFACTURE, TEST, PACKAGING, AND DELIVERY OF… — INDEFINITE DELIVERY / INDEFINITE QUANTITY W15QKN22R0008This Department of the Army indefinite delivery, indefinite quantity contract covers the manufacture, testing, packaging, and delivery of 155mm M1128 artillery metal parts assemblies, which serve as high explosive carriers. The vehicle is a full recompete with an ordering period extending through April 12, 2028. Currently, there are seven active task orders with a combined total value of over 418 million dollars. The contract is split between two primary incumbents, General Dynamics Ordnance and Tactical Systems Inc and IMT Defense Corp, who hold awards valued at approximately 211 million and 206 million dollars respectively. A significant portion of the contract value is dedicated to supporting the conflict in Ukraine and replenishing Army stockpiles, including a major order for over 151,000 metal parts. Other key activities include the production of projectile metal parts, base closures, and initial first article testing.

Ammunition (except Small Arms) Manufacturing

POSTED

DEADLINE

PA161/PA103A2 Metal Containers for the 155mm Modular Artillery Charge System (MACS) M231/232

Solicitation # W15QKN-27-R-A010

The U.S. Army Contracting Command Rock Island at Picatinny is seeking a five-year sole-source Indefinite Delivery/Indefinite Quantity contract for the production of PA161 and PA103A2 metal containers. These cylindrical steel containers are used to store and ship 155mm Modular Artillery Charge System M231 and M232 variants, providing essential protection and improving insensitive munitions characteristics. The contract is intended for Conco, Inc., with a projected award in the third quarter of FY2027 to support requirements from FY2027 through FY2031. The estimated maximum value of the contract is 586 million dollars, with a minimum guarantee of 5.2 million dollars. Total production goals over the five-year period include 920,145 PA161 containers and 3,090,060 PA103A2 containers. This effort will utilize Firm-Fixed-Price delivery orders and Level III Government-Owned Technical Data Packages. The Request for Proposal is anticipated for release in December 2026, and eligible contractors must be registered in the System for Award Management database.

Other Metal Container Manufacturing

POSTED

DEADLINE

155mm Modular Artillery for Combat Effectiveness (MACE)

Solicitation # W15QKN26R1C5R

The 155mm Modular Artillery for Combat Effectiveness (MACE) program is a solicitation issued by the U.S. Army Contracting Command Rock Island at Picatinny to develop a manufacturable cargo-carrying artillery projectile system. This effort is being conducted via a Prototype Other Transaction Agreement (OTA) under 10 U.S.C. 4022, with the government intending to award up to two agreements. The project is divided into two phases: Phase I focuses on projectiles with a range of 30 to 35 km, while Phase II targets ranges beyond 35 km. The ultimate goal is to support a Milestone C production decision by the fourth quarter of FY29, with potential follow-on production of up to 10,000 systems per year. The procurement process has been refined through several amendments, most notably Amendment 0005, which corrected schedule discrepancies by aligning milestones to relative durations after award and updating the Statement of Work and CLIN Matrix. Proposals are due by October 30, 2026, and must be submitted via SAM.gov in four distinct volumes. Evaluation is based on schedule and technical merit, with schedule being the primary factor for Phase I and technical capability being the primary factor for Phase II, alongside cost and price. Technical requirements specify compatibility with M777A2 and M109A7 39-caliber weapon platforms, as well as legacy propellant systems. Deliverables include various quantities of engineering, safety, and soldier testing projectiles, as well as critical design reviews and technical reports. Due to the sensitive nature of the technology, offerors must comply with strict non-disclosure agreements and provide specific certifications, including Business Status Certifications and DD2345 Military Critical Technical Data Agreements, to access controlled technical data. All materials must adhere to the Buy America Act and International Standards for Phytosanitary Measures for wood packaging.

Ammunition (except Small Arms) Manufacturing

POSTED

DEADLINE

BAA DEVCOM AC Emerging Technologies

Solicitation # W15QKN-26-S-1AZR

The U.S. Army Combat Capabilities Development Command Armaments Center is soliciting research proposals and white papers through Broad Agency Announcement W15QKN-26-S-1AZR to advance the state of the art in emerging weapons, munitions systems, and soldier lethality technologies. This continuously open solicitation, effective from March 5, 2026, through March 4, 2031, seeks innovative ideas for current and future generation armaments, ammunition, and fire control systems. Key priority areas include lethality support for combat vehicles such as the Abrams, Stryker, XM30, Bradley, and LAV, as well as research into novel power systems, energy harvesting, and model-centric design environments. The Army is also interested in advancements in armament packaging to improve sustainability and usability, as well as micro-system architecture for remote systems. The selection process is conducted under full and open competition, with awards based on scientific merit and military relevance rather than a direct comparison between proposals. Prospective offerors are encouraged to first submit a white paper of no more than five pages, which will be evaluated to determine if a full proposal is warranted. Successful proposals may result in contract awards for periods up to three years, typically structured as one basic year with two one-year options. All submissions must be unclassified and adhere to strict formatting guidelines, including the use of 12-point Times New Roman font. Evaluation factors are listed in descending order of importance, with the final factor being a cost realism analysis compared to available funds.

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

DEADLINE

in over 4 years

Metrology Software Support & Subscription ManagementThis subcontract, titled Metrology Software Support and Subscription Management, supports CMM operations for prime contractors on Army DEVCOM AC projects at Picatinny Arsenal. The scope of work involves providing technical helpdesk support, performing software upgrades, and managing MyCare service subscriptions utilizing Hexagon proprietary metrology software. The selected provider must hold Hexagon software certification to ensure the successful delivery of active subscriptions and critical software updates. This effort is managed under the Department of Defense through the W6QK Acc-Ri-Picatinny agency, falling under NAICS code 541519.

Other Computer Related Services

POSTED

DEADLINE

in about 10 hours

Precision Hardware & Replacement Parts SupplyThis subcontract, titled Precision Hardware & Replacement Parts Supply, involves the procurement of genuine Hexagon replacement parts and hardware components for stationary CMMs. These supplies support prime contractors on Army DEVCOM AC projects, specifically fulfilling requirements for hardware replacements identified during emergency repairs or routine maintenance. All components must be delivered directly to the QE&SA laboratory at Picatinny Arsenal. To ensure quality and compatibility, the provider must hold OEM certification or maintain status as an authorized distributor. The contract is managed under the Department of Defense through the W6QK Acc-Ri-Picatinny agency, falling under NAICS code 423830. The solicitation period opens on October 2, 2026, with a response deadline of October 16, 2026.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

in about 10 hours

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS