Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

AMPLIFIER, AUDIO FRE

Active
SPE7M5-26-T-364PFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of three audio frequency amplifiers, identified by NSN 5996-01-254-9503, under solicitation SPE7M5-26-T-364P, issued by the Department of Defense’s Active Devices Division. Delivery is required within 20 days of award, with the response deadline set for August 13, 2026, and the solicitation posted on August 2, 2026. The NAICS code 334220 classifies this as an electronics manufacturing procurement, and the place of performance is designated as Patrick SFB with a ZIP code of 32925. The contract incorporates DLA packaging requirements and mandates adherence to all technical and quality specifications listed in the DLA Master List of Technical and Quality Requirements, identified by R or I numbers, with the applicable revision controlled by the solicitation issue date for this simplified acquisition. Covered defense information provisions apply, and any non-accepted supplies must have government identification removed. The offeror must submit a complete data package covering both the approved part and any alternate part proposed. Primary point of contact for inquiries is Jonathan Flowers, reachable via email and phone provided.

General Info

Procure three audio amplifiers per NSN, deliver in 20 days, deadline August 13, 2026, to Patrick SFB 32925.

Agency

Department Of Defense → ACTIVE DEVICES DIVISIONView Agency

NAICS

334220 - Radio and Television Broadcasting and Wireless Communications Equipment ManufacturingView NAICS

Place of Performance

972 S PATRICK DR BLDG 822, PATRICK SFB, FL, 32925, US

Set-Aside

NONE

Documents

(1)

Request for Quotations SPE7M5-26-T-364P

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ACTIVE DEVICES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ACTIVE DEVICES DIVISION
View Agency Profile
Office AddressUS
Contacts
Jonathan Flowers
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
AMPLIFIER,AUDIO FRE
AMPLIFIER, AUDIO FREQUENCY
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD002, COVERED DEFENSE INFORMATION APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
NO DATA IS AVAILABLE. THE ALTERNATE OFFEROR IS
REQUIRED TO PROVIDE A COMPLETE DATA PACKAGE
INCLUDING DATA FOR THE APPROVED AND ALTERNATE
PART FOR NSN/Part Number: 5996-01-254-9503 Quantity: 3 EA Purchase Request: 7015858013QTY: 3 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334220
New
DIBBS
ADAPTER, WAVEGUIDE
Solicitation # SPE7M1-26-T-243Y
The contract pertains to the procurement of two waveguide adapters, identified by NSN 5985-00-752-5826 and part numbers HX-170A and HX292B, under solicitation SPE7M1-26-T-243Y. Delivery is required within five days FOB origin with no tolerance for quantity variance, and inspection and acceptance occur at the point of origin. Packaging must comply with MIL-STD-2073-1E and marking must adhere to MIL-STD-129, with no special marking required. The items are subject to stringent cybersecurity requirements under CMMC Level 2 self-assessment and the handling of covered defense information. Mercury and mercury-containing compounds are prohibited unless explicitly exempted for functional uses in batteries, lamps, instruments, sensors, controls, weapon systems, or specific chemical reagents, with additional containment requirements for portable devices. Sampling and quality verification follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stipulated, and unspecified attributes are treated as major. The contract mandates adherence to DLA’s Master List of Technical and Quality Requirements referenced by R and I numbers. Shipment is directed to DZ IKMAL MERKEZI KOMUTANLIGI in Derince, Izmit, Turkey, via freight forwarder A.J. Worldwide Services Inc., with the original delivery date set for December 2, 2025. The item falls under NAICS code 334220 and is managed by the Department of Defense’s Maritime Supply Chain.
MARITIME SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334220
New
DIBBS
ATTENUATOR, VARIABLE
Solicitation # SPE7M5-26-T-364D
The contract involves the procurement of a variable attenuator identified by NSN 5985-01-277-3293 and part number 434459-1, with a quantity of two units to be delivered within 206 days under solicitation SPE7M5-26-T-364D. Delivery is FOB origin, with inspection and acceptance occurring at the destination, and no quantity variance is permitted. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, unit and intermediate containers, and packaging code U, while marking follows MIL-STD-129 with no special marking required. The item is intended for shipment to the DLA Distribution facility in New Cumberland, Pennsylvania, with transportation governed by DLAD procedural notes C19 and C20. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R-numbers, and sampling adheres to MIL-STD-1916 or comparable zero-based plans, with zero nonconformances required unless otherwise stated. Cybersecurity compliance is mandated through a CMMC Level 2 self-assessment, and the contract incorporates requirements for handling covered defense information and removal of government identification from rejected supplies. The contract was posted on August 2, 2026, with responses due by August 13, 2026, under NAICS code 334220, and is managed by the Department of Defense’s Active Devices Division.
ACTIVE DEVICES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334220
New
DIBBS
FILTER, RADIO FREQUE
Solicitation # SPE7M5-26-T-364W
This contract is for the procurement of ten units of a radio frequency interference filter identified by NSN 5915009971137, manufactured strictly to the original equipment manufacturer's drawing specifications and available only from prequalified sources. Any offers proposing alternative manufacturers must include comprehensive technical and quality data to demonstrate equivalency for the intended application, as mandated by DLAI 3200.1. The item must comply with all technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, and the applicable revision of that list is determined by the solicitation or award date depending on the acquisition type. The contract prohibits the use of Class I ozone depleting chemicals in any part of the product or manufacturing process, overriding any conflicting specification language without altering the required product performance. Additionally, the item is subject to restricted access protocols under RD003, and vendors must be certified by a Cybersecurity Maturity Model Certification Level 2 accredited third-party assessment organization. Delivery is required within 20 days of award, and all supplies must be packaged in accordance with DLA packaging standards. The solicitation opens on August 2, 2026, with responses due by August 13, 2026, and is issued under solicitation number SPE7M5-26-T-364W by the Department of Defense’s Active Devices Division with Matthew Stanko as the primary point of contact.
ACTIVE DEVICES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334220
New
DIBBS
SWITCH, RADIO FREQUE
Solicitation # SPE7M0-26-T-025X
The contract pertains to the procurement of two radio frequency switches with NSN 5985-01-601-9070, supplied by Keysight Technologies Inc under part number 87106B. Delivery is required within five days of award, with shipment destined to Fresno, California, and must be delivered FOB origin without any variance in quantity. The items must be packaged and labeled in strict compliance with MIL-STD-129 and DLA’s packaging requirements, adhering to either Fed-Std-313 for hazardous materials or ASTM D3951 for non-hazardous items, with DLA’s Master List of Technical and Quality Requirements taking precedence over any commercial standards. All packaging must be palletized as specified under RP001, and the shipment must use traceable freight methods, explicitly prohibiting parcel post. The contract mandates compliance with CMMC Level 2 self-assessment for cybersecurity and requires removal of any government identification from non-accepted supplies. The required delivery date is July 6, 2026, with a solicitation issued under SPE7M0-26-T-025X, and the buyer point of contact is Audrey Acuna. All technical and quality specifications referenced via R or I numbers are governed by the DLA Master List, with the applicable revision determined by the solicitation issue date.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334220
New
DIBBS
ANTENNA
Solicitation # SPE7M5-26-T-363S
The contract is for the procurement of one antenna with NSN 5985-01-659-6352 and part number 66540-10 from Trimble Inc, under solicitation SPE7M5-26-T-363S. Delivery is required within 20 days from the contract award date, with shipment FOB origin and no variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including marking per MIL-STD-129 with no special markings. The unit is to be shipped via traceable freight, not parcel post, to the distribution management office at Camp Lejeune, North Carolina. Technical and quality standards referenced in the DLA Master List govern the requirements, with the applicable revision controlled by the solicitation issue date. The government’s required delivery date is July 29, 2026, and the contract includes specific logistics identifiers such as the military freight number and project code TP 3. The procurement is classified under NAICS code 334220 and is managed by the Department of Defense’s Active Devices Division, with Matthew Stanko listed as the primary point of contact for inquiries.
ACTIVE DEVICES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334220
New
DIBBS
DUMMY LOAD, ELECTRIC
Solicitation # SPE7M5-26-T-364U
This contract pertains to the procurement of a dummy load, electrical, identified by NSN 5985-01-022-8262 and part number 134709-0001, with a quantity of 28 units. The item is a restricted source requiring government engineering source approval and must comply with stringent technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, which override any conflicting industry standards. The contract prohibits the use of Class I ozone-depleting chemicals, mandating that any substitute chemicals be submitted for approval unless explicitly permitted by specification. Packaging and labeling must follow MIL-STD-129 and comply with RP001 DLA Packaging Requirements, with hazardous materials adhering to Fed-Std-313 and TQ requirement IP025, while non-hazardous items must meet ASTM D3951 unless superseded by DLA directives. Palletization must align with DLA standards, and delivery is FOB origin with no variance allowed in quantity. The item must be delivered to the specified receiving warehouse in Tracy, California, by December 10, 2026, with an allowable delivery window of 118 days from contract award. Inspection and acceptance occur at the destination, and transportation directives are governed by DLAD Proc Notes C19 and C20. The contract was issued as a total small business set-aside under NAICS code 334220, with a scheduled response deadline of August 13, 2026, and a unit price of $28.00 per item, yielding a total contract value of $784.00. Compliance with Cybersecurity Maturity Model Certification (CMMC) Level 2 is required, and all technical specifications referenced by R or I numbers must be sourced from the official DLA master list. The contracting office is the Department of Defense’s Active Devices Division, and the primary point of contact is Matthew Stanko.
ACTIVE DEVICES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334220
New
DIBBS
ATTENUATOR, VARIABLE
Solicitation # SPE7M5-26-T-364Y
The contract is for the procurement of seven variable attenuators, identified by the NSN 5985-01-319-4529 and part number KEYSIGHT TECHNOLOGIES INC 7ZXR5 P/N HP8595A OPT001, classified as a commercial off-the-shelf (COTS) item and designated as a critical application item. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with specific references to R and I numbers, and compliance with DLA packaging standards including MIL-STD-129 and RP001, superseding ASTM D3951 where applicable. The item must be packaged in accordance with Fed-Std-313, either as hazardous material under TQ requirement IP025 or commercially under ASTM D3951 if non-hazardous, and palletized per DLA guidelines. Cybersecurity compliance requires a CMMC Level 2 Self-Assessment, and the contractor must adhere to RD002 requirements for covered defense information. Delivery is FOB origin with zero variance allowed in quantity, inspection and acceptance occur at destination, and the shipment must arrive within 158 days of contract award, with a required ship date of January 19, 2027. The delivery address is DLA Distribution Warner Robins at Robins AFB, Georgia, and transportation directives are governed by DLAD Proc Note C19 and C20. The solicitation number is SPE7M5-26-T-364Y, issued under NAICS code 334220 by the Department of Defense’s Active Devices Division, with Matthew Stanko as the primary point of contact.
ACTIVE DEVICES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334220
New
DIBBS
Security Systems IntegrationThe contract titled Security Systems Integration is a subcontract under the Department of Defense, managed by the Defense Logistics Agency, for the installation and integration of comprehensive security systems including access control, surveillance, and intrusion detection. Scheduled for performance beginning on August 1, 2026, the work falls under NAICS code 334220, which pertains to electronic manufacturing and systems integration. While specific location details for performance or office addresses are not provided, the contract is linked to DIBBS, indicating its affiliation with federal defense procurement processes. The subcontract is part of a larger effort to enhance physical security infrastructure across defense installations, leveraging advanced technology to ensure secure operations and real-time monitoring capabilities. The absence of set-aside classification suggests it is open to any eligible contractor without specific socioeconomic preferences.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 334220
New
Federal
Radio Communications Relay ModuleThe contract involves the supply of a secure, long-range radio communications relay module designed for integration into unmanned aerial systems to ensure uninterrupted communication in remote or disaster-affected environments. The system must provide robust, encrypted transmission capabilities over extended distances, enabling situational awareness and coordination where traditional communication infrastructure is unavailable or compromised. This subcontract is part of a broader effort by the Department of the Interior’s Ibc Acq Svcs Directorate to enhance operational resilience through advanced airborne communication technologies. The equipment will be developed and delivered under NAICS code 334220, which corresponds to communication equipment manufacturing, indicating a focus on specialized hardware engineering and production. The contract was posted on August 1, 2026, and no set-aside provisions or specific performance location details are listed, suggesting a national or flexible scope for delivery and deployment. The solution must meet stringent security standards to safeguard sensitive data and operate reliably under extreme conditions, supporting critical missions in challenging terrains and emergency response scenarios.
Ibc Acq Svcs Directorate (00004)

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 334220
New
DIBBS
ANTENNA
Solicitation # SPE7M1-26-T-218S
The contract involves the procurement of five antennas with NSN 5985-01-682-0443 under solicitation SPE7M1-26-T-218S, issued by the Maritime Supply Chain branch of the Department of Defense. Delivery is required within 95 days after order placement, with a firm delivery date of October 14, 2027, and a need ship date of November 3, 2026. The place of performance is the DDSP New Cumberland Facility in Pennsylvania, with FOB Origin terms applying. The total contract value is $25.00, based on a unit price of $5.000 per unit. Packaging, preservation, and marking must strictly follow Special Packaging Instruction AK16820443 Revision B, MIL-STD-2073-1E, and MIL-STD-129, including barcoding and labeling requirements. All hazardous materials must comply with OSHA’s Hazard Communication Standard, require pre-award submission of Safety Data Sheets, and be labeled according to federal regulations, with updates mandatory throughout performance. The contractor is prohibited from using foreign-flag vessels without 45 days’ prior written notice and documented efforts to secure U.S.-flag alternatives. Invoicing must be conducted through the Wide Area WorkFlow system, with payment routed via Department of Defense Activity Address Codes. The contract includes extensive compliance clauses under the Federal Acquisition Regulation and Defense Federal Acquisition Regulation Supplement, covering cybersecurity requirements including NIST SP 800-171, safeguarding of contractor information systems, employment eligibility verification, combating human trafficking, sustainable products, and small business subcontractor payment acceleration. Offerors must provide UEI and CAGE codes if supplying covered defense telecommunications equipment, and are required to affirm their size status and socioeconomic category eligibility, including participation in small business programs. The solicitation explicitly excludes detailed technical specifications in Section C, directing compliance to the DLA Master List of Technical and Quality Requirements referenced by R and I numbers. Proposals must be submitted electronically via the DLA Internet Bid Board System by August 5, 2026, with technical inquiries routed through designated DLA portals.
MARITIME SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 334220
New
DIBBS
ANTENNA
Solicitation # SPE7M5-26-T-337R
The contract pertains to the procurement of an antenna with NSN 5985-01-476-4910 and part number 7514081-917, for a total quantity of four units, under solicitation SPE7M5-26-T-337R. Delivery is required within 154 days after award, with a need ship date of January 2, 2027, and an original delivery deadline of January 9, 2027. The item must be shipped FOB origin to DLA Distribution Warner Robins at Robins Air Force Base, Georgia, and inspected and accepted at the destination. Packaging must comply with DLA’s RP001 requirements, with hazardous materials packaged per TQ Requirement IP025 and non-hazardous materials in accordance with ASTM D3951, though all DLA Master List requirements supersede commercial standards. All packaging and labeling must meet MIL-STD-129, and each unit must bear a permanent Item Unique Identification (IUID) per MIL-STD-130. The contract mandates compliance with CMMC Level 2 self-assessment and safeguarding of covered defense information under DFARS 252.204-7012, with adherence to NIST SP 800-171 assessment requirements. Payment must be processed electronically through WAWF, and invoicing and receiving reports are subject to DFARS clauses 252.232-7003 and 252.232-7006. The contract includes a full suite of FAR and DFARS clauses covering equal opportunity, trafficking in persons, employment eligibility verification, sustainable products, cybersecurity, hazardous materials prohibitions, export control, and whistleblower protections. Offers must be submitted electronically via DIBBS by the deadline of July 31, 2026, and include UEI, CAGE code, and socioeconomic status certifications if applicable. No pricing data is provided in the CLIN, and the contract type remains undetermined pending award. The procurement is subject to a zero percent quantity variance, and all technical and quality requirements referenced by R or I numbers are governed by the DLA Master List in effect on the solicitation issue date.
ACTIVE DEVICES DIVISION

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 334220
New
Federal
Man Portable Kit Assembly and DeliveryThe contract requires the production and delivery of 75 man-portable tactical communication kits designed for military use, featuring ruggedized hardware and embedded software configured to meet strict military standards. Each kit must be fully assembled, tested, and ready for immediate deployment in field operations, ensuring reliability under extreme environmental conditions. The deliverables include not only the physical units but also all necessary firmware, configuration profiles, and documentation to support operational integration and maintenance. Performance is governed by a strict timeline with a response deadline of August 21, 2026, and the solicitation falls under NAICS code 334220, indicating classification within electronic component and subassembly manufacturing. The contracting entity is the Department of Defense through its office W6QK Acc-Apg, and while the place of performance is unspecified, delivery must comply with military logistics requirements. This is a subcontract opportunity, suggesting the prime contractor may be sourcing specialized components or assembly services to fulfill the larger program, and all submitted proposals must meet the technical and compliance benchmarks expected for defense-related equipment.
W6QK Acc-Apg

POSTED

2 days ago

DEADLINE

in 19 days
View Details

More opportunities from Department Of Defense → ACTIVE DEVICES DIVISION

Same awarding agency

NAICS: 334418
New
DIBBS
CIRCUIT CARD ASSEMB
Solicitation # SPE7M5-26-T-364V
The contract seeks the procurement of 14 Circuit Card Assemblies identified by NSN 5998-01-377-7194 under a total small business set-aside, with delivery required 177 days after award to Hill Air Force Base, Utah. All items must comply with the DLA Master List of Technical and Quality Requirements, and packaging must adhere strictly to MIL-STD-2073-1E and DLA’s RP001 standards, incorporating moisture-vapor barrier and cushioning materials such as WRAP MAT:K3 and CUSH/DUNN MAT:NB. ESD/EMI-sensitive components require packaging meeting MIL-PRF-81705, with special labeling code "39" for ESD-sensitive devices, and all shipments must be marked per MIL-STD-129, including proper hazard and export-control identifiers. The contractor must hold CMMC Level 2 certification and implement safeguards for covered defense information as mandated by DFARS 252.204-7012. Export-controlled technical data governed by ITAR or EAR regulations applies, restricting access to only those contractors with JCP certification, completed DLA export training, and explicit DLA approval. The contract requires full compliance with FAR and DFARS clauses covering employment eligibility, trafficking in persons, sustainable products, hazardous materials handling, cybersecurity, whistleblower rights, and prohibitions on acquiring equipment from communist Chinese military companies. Invoicing is mandatory through WAWF, and the government will conduct destination inspection. Offerors must represent their small business status and disclose any joint venture participation or provision of covered telecommunications equipment, including UEI and CAGE codes where applicable. The solicitation closed on August 13, 2026, and the estimated value is approximately $115,540.52 based on line-item pricing, though contract type and detailed evaluation criteria are not specified in the available documentation.
Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335313
New
DIBBS
FUSE, CARTRIDGE
Solicitation # SPE7M5-26-T-363U
The contract specifies the procurement of four electric fuses, cartridge type, identified by NSN 5920-01-488-8327 and part numbers 12379 from FIBREBOND CORP and FLNR100ID from LITTELFUSE INC. The delivery requirement is for completion within 20 days from the specified required delivery date of July 29, 2026, with shipment to be delivered FOB origin and inspected and accepted at the destination. No variance in quantity is permitted, and the total contract value is $16.00 based on a unit price of $4.00 per unit. Packaging must conform strictly to DLA’s Master List of Technical and Quality Requirements, with additional compliance to MIL-STD-129 for marking and labeling. If deemed hazardous under FED-STD-313, packaging must meet TQ requirement IP025; otherwise, it must follow ASTM D3951 and commercial packaging standards, with palletization adhering to RP001. The shipment must be sent via the fastest traceable freight means, explicitly excluding parcel post, to the designated DoD logistics site in Houston, Texas. All technical, quality, and packaging specifications issued by DLA take precedence over any commercial standards. The solicitation was issued under contract number SPE7M5-26-T-363U with a response deadline of August 13, 2026, and is managed by the Department of Defense’s Active Devices Division, with Matthew Stanko as the primary point of contact.
Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335931
New
DIBBS
CONNECTOR, PLUG, ELEC
Solicitation # SPE7M5-26-T-364Q
The contract pertains to the procurement of an electrical plug connector with the NSN 5935-01-540-0279 and part number K5M5-AKPN from The Boeing Company or 59122WK20PN from TE Connectivity Corporation, with a total quantity of 48 units at a unit price of $48.00, resulting in a total contract value of $2,304. Delivery is required within 81 days from the award date, with FOB origin terms, and inspection and acceptance are to occur at the destination. The product must comply with all applicable DLA Master List of Technical and Quality Requirements referenced by R or I numbers, including packaging standards such as MIL-STD-129 for marking and labeling, and adherence to RP001 for DLA packaging requirements. Sampling and quality verification follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are to be classified with corresponding verification levels or AQLs. Packaging must conform to ASTM D3951 for non-hazardous items or FED-STD-313 compliant methods if hazardous, with DLA requirements taking precedence. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, and the required ship date is November 3, 2026, with the original delivery due by February 11, 2027. The solicitation number is SPE7M5-26-T-364Q, issued under NAICS code 335931 by the Department of Defense’s Active Devices Division, and all documentation must align with the authorized unit of issue as defined by DLA.
Current-Carrying Wiring Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334417
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE7M5-26-T-364T
This contract pertains to the procurement of an electrical plug connector, identified by NSN 5935001772221 and part number M24231/1-001, governed by military specification MIL-DTL-24231/1E and referenced engineering instructions and quality assurance provisions. The item is classified as a critical application requiring strict adherence to technical and quality standards, including compliance with DLA packaging requirements, MIL-STD-2073-1E packaging, and MIL-STD-129 marking. The contract prohibits the use of ozone-depleting chemicals and restricts intentional incorporation of mercury or mercury-containing compounds, with limited exceptions for specific functional components such as batteries and sensors, which must include secondary containment measures. Sampling and inspection protocols follow MIL-STD-1916 or ASQ SPE7M5-26-T-364T with zero-defect acceptance criteria unless otherwise specified, and critical dimensions such as keyway diameter must be measured to the outer edge of the radius per Engineering Instruction EI-001772221. The item is subject to configuration change management and requires formal variance requests for any deviations. The contract includes two line items: one for the main product, with a quantity of 851 units delivered FOB origin within 215 days and a unit price of $851.00, and a second line item for first article testing (FAT) requiring one unit to be submitted for validation. The FAT is mandatory and no separate charge is assumed unless explicitly quoted; if waived, no payment is made for this line. The delivery destination is the DLA Distribution facility in New Cumberland, PA, and the shipment must be palletized and documented in strict compliance with DLA procedures. The solicitation mandates full and open competition, applies covered defense information requirements, and enforces strict compliance with all referenced technical documents listed in the DLA Master List. The original required delivery date is December 26, 2026, with a need ship date of November 17, 2026, and the contract is issued under solicitation SPE7M5-26-T-364T, with responses due by August 13, 2026.
Electronic Connector Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334413
New
DIBBS
MICROCIRCUIT, LINEAR
Solicitation # SPE7M5-26-T-364X
This contract specifies the procurement of a linear microcircuit under Federal Supply Class 5962, with the part number REG1117A manufactured by Texas Instruments Incorporated and identified by NSN 5962016069670. The requirement mandates strict adherence to traceability, packaging, and marking standards set forth by the Defense Logistics Agency, including compliance with DLA Procurement Notes C03 for supply chain documentation retention and DLA Land and Maritime Form 918 for test and traceability verification. The contractor must submit digital copies of traceability or test reports at least 15 days prior to delivery, limited to 15 megabytes per email, using a prescribed naming convention, and must receive explicit written authorization before shipping. Physical packaging must conform to MIL-STD-2073-1E and MIL-STD-129, with special markings prohibiting disclosure of item nomenclature due to controlled status. Lead finish must be marked per IPC/JEDEC J-STD-609, and ESD and EMI protection must be implemented using qualified materials listed on QPL-81705, with cushioning meeting A-A-59136 Class 1 Grade B specifications and thickness requirements exceeding lead length by at least one-eighth inch. No surplus material is acceptable, and inspection and acceptance occur at destination with zero tolerance for non-conformances under MIL-STD-1916 or comparable zero-based sampling plans. The contract specifies a firm fixed price of $24.00 per unit, totaling $576 for 24 units, with delivery due within 127 days, shipped FOB origin to the designated Columbus, Ohio logistics center.
Semiconductor and Related Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, PLUG, ELECTRI
Solicitation # SPE7M5-26-T-364L
The contract pertains to the procurement of four electrical plug connectors with NSN 5935-01-467-1395 under solicitation SPE7M5-26-T-364L, issued by the Department of Defense’s Active Devices Division. Delivery is mandated within 172 days after award, and responses must be submitted by August 13, 2026. All supplies must comply with DLA packaging requirements and incorporate technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. The item is subject to strict cybersecurity requirements mandating a CMMC Level 2 self-assessment, and the use of any Class I ozone-depleting substances in its design or manufacturing is explicitly prohibited unless written approval from the contracting officer is obtained. Physical identification and marking of the bare item are required, and government identification must be removed from non-accepted supplies. No data package is provided, so offerors must submit complete documentation for both the approved and alternate part numbers. The place of performance is specified as New Cumberland, Pennsylvania, with Margaret Smith as the primary point of contact for inquiries.
Electronic Connector Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334417
New
DIBBS
INSERT, ELECTRICAL CONN
Solicitation # SPE7M5-26-T-364E
This contract is for the procurement of 60 electrical connector inserts with NSN 5935-01-062-4473 under solicitation SPE7M5-26-T-364E, issued as a Total Small Business Set-Aside with a response deadline of August 13, 2026, and a required delivery within 100 days of award. The item must comply with stringent technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date or contract award date depending on acquisition size. The contractor is required to implement configuration change management procedures and must not use any Class I ozone-depleting chemicals in production or packaging; any substitute chemicals require prior approval unless explicitly permitted by specification. All supplies must be physically marked as per RQ017, and government identification must be removed from non-accepted items per RQ011. Inspection and acceptance must occur at the origin per RQ009. First Article Testing is mandatory per MIL-C-24321E, with the contractor required to notify DLA at least 10 days in advance and submit one unit for testing within 10 calendar days after government receipt. The government may waive this requirement for previously accepted products meeting preproduction testing criteria. The place of performance is New Cumberland, PA, with the Department of Defense’s Active Devices Division as the contracting entity. Full and open competition applies for eligible small businesses, and detailed technical drawings and a bid set are available. Contractor FAT obligations are active and governed by FAR 52.209-3.
Electronic Connector Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334511
New
DIBBS
INSERT, FEED
Solicitation # SPE7M5-26-T-364R
This contract, issued under solicitation number SPE7M5-26-T-364R by the Department of Defense’s Active Devices Division, requires the delivery of one unit of a specific item identified by NSN 5999-01-588-5553 and part number 4241071-1. Delivery is due within 10 days of contract award, FOB origin, with no variance allowed in quantity. The item must be packaged in strict adherence to DLA’s Packaging Requirements for Procurement, including compliance with MIL-STD-129 for marking and labeling, and ASTM D3951 for commercial packaging unless the item is classified as hazardous, in which case Fed-Std-313 and TQ requirement IP025 apply. All technical and quality requirements referenced by R or I numbers in the contract are governed by the DLA Master List of Technical and Quality Requirements, which supersedes any industry standards. The contractor must also complete a Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment. The item must be shipped via the fastest traceable means, excluding parcel post, to the specified delivery address in Eastover, South Carolina, with all packaging clearly marked for W81BDW. The unit of issue is each, and the contract specifies no pricing details beyond a nominal quantity with a total price of $1.00, indicating this may be a nominal or administrative fulfillment. The original required delivery date is July 28, 2026, and all government-specific identifiers and data codes are included for internal tracking purposes only.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, FIXED, WIRE
Solicitation # SPE7M5-26-T-363Y
The contract is for the procurement of three fixed wire resistors identified by NSN 5905-01-061-9575 under solicitation SPE7M5-26-T-363Y, issued by the Department of Defense’s Active Devices Division. The requirement is subject to the DLA Packaging Requirements and incorporates all technical and quality specifications listed in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issuance or award date depending on the acquisition size. The resistors must comply with physical identification and bare item marking standards, and the alternate offeror is required to submit a complete data package covering both the approved and alternate parts. Delivery is due in 256 days after award, with performance taking place at Hill AFB, Utah, 84056-5734. The solicitation was posted on August 2, 2026, with responses due by August 13, 2026, and the NAICS code is 334416 for electronic component manufacturing. Point of contact for inquiries is Jeanette Heisey, reachable via email and phone provided.
Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details