Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

AMPLIFIER, ELECTRONI

Active
SPE7M5-26-T-302BFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves the procurement of an electronic amplifier, identified by NSN 5996016076915 and part number 60087773-000 from L3 Technologies, Inc., with a quantity of three units to be delivered within 151 days after award. Delivery is FOB origin, with inspection and acceptance occurring at the destination facility located at the DLA Distribution DDSP New Cumberland Facility in New Cumberland, Pennsylvania. The item is designated as a critical application item and requires full compliance with MIL-STD-130 for Item Unique Identification (IUID), as well as adherence to DFARS 252.211-7003. Packaging must conform to MIL-STD-2073-1E with special attention to ESD and EMI protection per MIL-PRF-81705, requiring Type I barrier material for both ESD and EMI mitigation, and Type III barrier wrap if ESD-approved cushioning is not otherwise specified; all materials must be sourced from qualified manufacturers on QPL-81705. The item must be labeled with the special marking code 39 indicating ESD sensitivity, and marking must comply with MIL-STD-129, including linear and 2D Data Matrix barcodes for IUID. Preservation uses method GX with dry storage, K3 wrap material, and P4 cushioning. The supplier is responsible for ensuring that all ESD/EMI-sensitive components are protected during handling and packaging, including proper cushioning to prevent lead damage. Hazardous materials, if present, must be labeled in accordance with 29 CFR 1910.1200 and accompanying safety data sheets submitted prior to award. The contract employs the Wide Area WorkFlow (WAWF) system for invoicing and requires adherence to all applicable FAR and DFARS clauses, including those governing transport by sea, employment eligibility, combating trafficking, and cybersecurity reporting. The solicitation issued on July 16, 2026, with a proposal deadline of July 21, 2026, and is managed by the Defense Logistics Agency’s Active Devices Division, with Jeanette Heisey as the point of contact. No pricing details are completed in the contract, leaving the total contract value undefined, and the contract type remains undetermined pending award.

General Info

Three amplifiers sought by Defense Logistics Agency, due July 16, 2026, via DIBBS for federal entities.

Agency

Department Of Defense → ACTIVE DEVICES DIVISIONView Agency

NAICS

444180 - Other Building Material DealersView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7M5-26-T-302B for DLA Land and Maritime Active Devices

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

1 update
PhaseSolicitation
Posted

Solicitation

Amendment 1

Contract was updated

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ACTIVE DEVICES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ACTIVE DEVICES DIVISION
View Agency Profile
Office AddressUS
Contacts
Jeanette Heisey
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
AMPLIFIER,ELECTRONI
AMPLIFIER,ELECTRONI
This item requires Item Unique Identification (IUID) in accordance with the enclosed/referenced IUID technical requirements and MIL-STD-130. DFARS 252.211-7003 clause applies. RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
CRITICAL APPLICATION ITEM
L3 TECHNOLOGIES, INC. 06401 P/N 60087773-000
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017233113 0001 EA 3.000
NSN/MATERIAL:5996016076915
DELIVERY (IN DAYS):0151
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:GX CLNG/DRY:1 PRESV MAT:00
WRAP MAT:K3 CUSH/DUNN MAT:P4 CUSH/DUNN THKNESS:A
SPE7M5-26-T-302B
SECTION B
PR: 7017233113 PRLI: 0001 CONT’D
UNIT CONT:D3 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:39 -39 ESD sensitiv electrnic dvce
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
ESD and PHYSICAL protection are required for contacts, leads, terminals, and other protrusions by means of container design, cushioning, and/or other ESD protective devices. Components with pins or leads shall have adequate cushioning to PREVENT DAMAGE, BREAKAGE and/or BENDING OF LEADS when not specified in the packaging codes.
This item requires DOD QUALIFIED Electrostatic Discharge (ESD) and/or Electromagnetic Interference (EMI) protective packaging materials in accordance with MIL-PRF-81705. All items subject to degradation from ESD/EMI environmental field forces shall be handled and packaged at an approved field force protective work station.
For ESD protection MIL-PRF-81705, Type I (MIL-DTL-117, Type I, Class F, Style 1) converted bag barrier material shall be used along with MIL-PRF-81705, Type III (MIL-DTL-117 Type II, Class H, Style 2) barrier material wrap if the contract doesn't specifically require ESD approved cushioning.
For EMI protection MIL-PRF-81705, Type I (MIL-DTL-117, Type I, Class F, Style 1) converted bag barrier material shall be used.
The supplier shall be responsible for verifying that all MIL-PRF-81705 barrier materials (or converted bags) were supplied from a qualified manufacturer currently listed on QPL-81705.
For additional ESD/EMI packaging information, refer to the following DLA packaging website: https://www.dla.mil/HQ/LogisticsOperations/Packaging/PackFAQs/ESDS/
If the preservation method code in the solicitation does not specify ESD/EMI protection and the Offeror's proposed item of supply is subject to degradation from ESD/EMI environmental field forces, Offerors shall provide appropriate technical packaging data with their proposals.
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
SPE7M5-26-T-302B
SECTION B
PR: 7017233113 PRLI: 0001 CONT’D
Need Ship Date:12/15/2026 Original Required Delivery Date:05/16/2027
SPE7M5-26-T-302B NSN/Part Number: 5996-01-607-6915 Quantity: 3 EA Purchase Request: 7017233113QTY: 3 Delivery: 151 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 444180
New
DIBBS
HARNESS ASSY, AIRCRAThe contract pertains to the procurement of two aircraft harness assemblies with NSN 5935-20-005-7155 under solicitation SPE4A5-26-T-296D, with a delivery deadline of 545 days after contract award. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for large acquisitions or the award date for simplified acquisitions, unless amended. Documentation requirements include submission of a complete data package for both the approved and alternate parts, adherence to configuration change management through engineering change proposals, and compliance with DLA packaging standards. The harness assemblies must be physically marked in accordance with RQ017, and any government identification on non-accepted supplies must be removed as stipulated by RQ011. Source approval requests and variance or waiver requests must be properly documented. The point of contact is Evgeny Korovin, and performance is to occur in Tracy, California, 95304-5000, with responses due by July 28, 2026.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 444180
New
DIBBS
CABLE ASSEMBLY, SPECThe contract pertains to a special cable assembly with the NSN 5995-01-632-0482 and a quantity of three units, under purchase request 7017529291. The item is classified as export-controlled technical data subject to either the International Traffic in Arms Regulations or the Export Administration Regulations, meaning its disclosure to foreign persons—or even U.S. entities with foreign ownership or subsidiaries—requires prior authorization from the Department of State or Commerce. Access to this technical data is restricted strictly to DLA contractors who hold an approved US/Canada Joint Certification Program certification, have completed mandatory training on handling DOD export-controlled data, and have been formally approved by the DLA controlling authority. Distribution and handling of the data must comply with DFARS 252.225-7048. The solicitation number is SPE4A6-26-T-07FV, posted on July 16, 2026, with responses due by July 24, 2026. The place of performance is New Cumberland, Pennsylvania, with a delivery timeline of 337 days after order. The contracting office is the ASC Commodities Division under the Department of Defense, and the point of contact is Thanh Hue Nguyen, reachable via email and phone provided.
ASC COMMODITIES DIVISION

POSTED

5 days ago

DEADLINE

in 3 days
View Details
NAICS: 444180
New
DIBBS
SWITCH, ROTARYThe contract solicitation SPE7M8-26-T-5187 seeks the procurement of 10 rotary switches with NSN 5930-01-626-0576 under a simplified acquisition, with delivery required 154 days after direction of order to the DDSP New Cumberland facility in Pennsylvania. The item is governed by DLA Packaging Requirements RP001 and must comply with MIL-STD-129 for marking and labeling, ASTM D3951 for commercial packaging unless superseded by the DLA Master List of Technical and Quality Requirements, and FED-STD-313 for hazardous materials handling, which triggers compliance with technical requirement IP025. Hazardous materials must be labeled per the Hazard Communication Standard (29 CFR 1910.1200), with exceptions for materials regulated under FIFRA, FDCA, CPSA, FHSA, or FAA Act, and non-exempt labels must be submitted pre-award with accompanying safety data sheets. Bar-coding, while not explicitly detailed, is implied through linkage to ANSI X12 unit of issue standards used in DLA systems. All packaging, preservation, and marking must align with DLA standards, and shipments must comply with FOB destination terms, placing transportation responsibility and risk on the contractor until receipt at the destination. The solicitation invokes numerous FAR and DFARS clauses, including those governing employment eligibility, combating trafficking, sustainable products, safeguarding covered defense information, cybersecurity requirements under NIST SP 800-171 with deviation 2026-00025, subcontracting for commercial items under deviation 2026-0015, and prohibitions on covered telecommunications equipment and hexavalent chromium. Payment must be made electronically via WAWF, with invoicing methods depending on contract type, and accounting details are to be determined post-award through DoDAAC codes. The evaluation methodology, basis of award, and specific pricing are not disclosed, with the contract value remaining unestablished due to missing unit price data. Offerors must possess a valid UEI and CAGE code and provide size status and socioeconomic certifications if claiming small business, HUBZone, SDVOSB, WOSB, or SDB status; affirmative responses regarding covered defense equipment or joint ventures trigger additional reporting. Proposals must be submitted electronically via DIBBS by July 21, 2026
ELECTRICAL DEVICES DIV

POSTED

5 days ago

DEADLINE

in about 1 hour
View Details
NAICS: 444180
New
DIBBS
STUFFING TUBEThe contract pertains to the procurement of a stuffing tube identified by NSN 5975-99-853-4063, classified as a commercial off-the-shelf item, with delivery required within 20 days from the contract date under FOB origin terms. Only one unit is being procured at a unit price of $1.00, with no variance allowed in quantity. Inspection and acceptance occur at the destination, and all packaging must adhere to MIL-STD-2073-1E standards, including specific preservation methods, container types, and packaging codes. Marking must follow MIL-STD-129 with no special markings required, and palletization must comply with DLA packaging requirements. The item must be shipped by the fastest traceable means, explicitly prohibiting parcel post, with delivery directed to Assault Craft Unit ACU 2 in Virginia Beach, Virginia. Compliance with MIL-STD-1916 or equivalent zero-based sampling plans is mandated, with critical, major, and minor attributes assigned verification levels or AQLs as specified, and any unspecified attributes treated as major. The contractor must adhere to all technical and quality requirements referenced via DLA’s Master List, and shipping documentation must include the provided transportation control number and project identifiers. The original required delivery date is July 9, 2026, with an associated solicitation number SPE4A7-26-T-576J.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

5 days ago

DEADLINE

in 3 days
View Details
NAICS: 444180
New
DIBBS
CONNECTOR, RECEPTACLThe contract is for the procurement of two electrical connector receptacles identified by NSN 5935-01-143-5070, with a firm fixed price and zero variance allowed in quantity. The item must comply with strict technical and quality requirements tied to the DLA Master List of Technical and Quality Requirements, which supersede other standards. It is a qualified product listed under the Qualified Products List for Federal Stock Class 5935, requiring adherence to specified qualification criteria outlined in procurement note H01. The connector must be manufactured without any Class I ozone-depleting substances unless explicit written approval is obtained from the contracting officer, and this restriction does not apply to commercial items or part-numbered-only components. The item shall be built in accordance with SAE AS34541 Revision B and SAE AS50151 Revision E, with part number MS3454W24-22P. All packaging must conform to DLA’s RP001 requirements and MIL-STD-129 labeling standards, with non-hazardous materials packed per ASTM D3951 only if not contradicted by DLA requirements. Hazardous materials, if applicable, must follow FED-STD-313 and TQ requirement IP025. The unit of issue is each, with delivery required within 20 days of award, FOB origin, and inspection and acceptance occurring at destination. Shipping must be by traceable means; parcel post is prohibited. The delivery location is Cannon Air Force Base, New Mexico, with specific parcel and freight shipping addresses provided. The contract was issued under solicitation SPE7M5-26-Q-0727, with a required response deadline in July 2026 and a material need date of June 23, 2026. The procurement is managed by the Department of Defense, Active Devices Division, with Andrew Bracken as the primary point of contact.
ACTIVE DEVICES DIVISION

POSTED

7 days ago

DEADLINE

in 8 days
View Details
NAICS: 444180
New
DIBBS
CABLE ASSEMBLY, SPECThe contract calls for the procurement of a single cable assembly identified by NSN 5995-01-629-3697 under solicitation SPE4A6-26-T-06GZ issued by the ASC Commodities Division of the Department of Defense. Delivery is required within 20 days ADO FOB destination, with the item designated for Foreign Military Sales to the Netherlands. The requirement incorporates extensive technical and quality standards from the DLA Master List of Technical and Quality Requirements, including RA001 for technical specifications, RP001 for packaging guidelines, and RD002 for Covered Defense Information. The cable assembly must be manufactured to Basic Drawing NR 53711 6964565 Revision NR A and Technical Data Package Rev A Gen 1, with packaging and marking strictly following MIL-STD-2073-1E and MIL-STD-129. Special packaging parameters include preservation method 10, cushioning material AD, and unit container E5. Hazardous materials must be labeled in compliance with 29 CFR 1910.1200 and MIL-STD-129, with additional marking requirements for radioactive items exceeding specific activity thresholds. The solicitation imposes stringent export control obligations under ITAR and EAR, with technical data restricted to contractors holding an approved US/Canada Joint Certification Program certification, having completed required DLA training, and received explicit authorization from DLA. Compliance with DFARS 252.225-7048 is mandatory, and offers must include a valid Safety Data Sheet meeting 29 CFR 1910.1200(g) and Federal Standard No. 313 to be considered for award. Cybersecurity requirements include safeguarding Covered Defense Information as per DFARS 252.204-7012, adherence to NIST SP 800-171, and prohibitions on use of covered defense telecommunications equipment under DFARS 252.204-7018. The contractor must be registered in the System for Award Management, maintain current representations, comply with anti-trafficking, equal opportunity, and employment eligibility verification mandates, and submit all payment documentation via Wide Area WorkFlow. Additive manufacturing is prohibited unless specifically authorized, with non-compliant offers deemed ineligible. Inspection and acceptance occur at origin under MIL-STD-1916
ASC COMMODITIES DIVISION

POSTED

7 days ago

DEADLINE

in 1 day
View Details
NAICS: 444180
New
DIBBS
BATTERY, STORAGEThis contract specifies the procurement of a rechargeable sealed lead-acid storage battery with NSN 6140-14-585-0056 and part number A9F75210 from SCHNEIDER ELECTRIC FRANCE, requiring delivery of one unit within 20 days to the USS FORREST SHERMAN DDG 98 at FPO AE 09569 under FOB destination terms. The item carries a non-extendable 12-month shelf life and must comply with all DLA Master List of Technical and Quality Requirements referenced by R and I numbers, which take precedence over commercial standards like ASTM D3951. Packaging must adhere to MIL-STD-129 and DLA Packaging Requirements, with hazardous material provisions governed by FED-STD-313 and IP025 if applicable. Zero-defect acceptance is mandated under MIL-STD-1916 or equivalent zero-based sampling, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively. The battery must contain no intentional mercury or mercury compounds except as permitted for functional use in batteries, and all items must be physically marked per RQ017. Shipments must use traceable freight methods and prohibit parcel post, with delivery tied to the required date of July 7, 2026.
Defense Logistics Agency

POSTED

7 days ago

DEADLINE

in 6 days
View Details
NAICS: 444180
DIBBS
CABLE ASSEMBLY, SPECThis contract specifies the procurement of a single cable assembly with part number 101994-IE503 and NSN 5995-01-642-6319, issued under solicitation SPE4A0-26-T-3869 by the Department of Defense’s Aviation Supply Chain ESOC Buys office. The item must be delivered in one unit within five days of contract award, FOB origin, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must fully comply with MIL-STD-2073-1E and DLA packaging requirements, including proper marking per MIL-STD-129 and palletization per RP001. The item is destined for MCAS Futenma in Okinawa, Japan, and requires shipment via vessel with transportation governed by DLAD Proc Note C19 and C20. All technical and quality requirements are referenced from the DLA Master List of Technical and Quality Requirements, with sampling to follow MIL-STD-1916 or an equivalent zero-based plan, enforcing zero non-conformances unless otherwise stated. Critical attributes must meet verification level VII or an AQL of 0.1. The supplier is required to perform a CMMC Level 2 self-assessment and implement cybersecurity controls as mandated. Government identification must be removed from non-accepted supplies, and physical identification of the bare item must adhere to RQ017. The contract includes specific handling codes for packaging, containment, and marking, with no special markings required. Delivery is due by June 18, 2026, and the point of contact is Tiffany Shell at DLA, with further details accessible via the designated DIBBS portal.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

8 days ago

DEADLINE

in about 1 hour
View Details
NAICS: 444180
DIBBS
CABLE ASSEMBLY, SPECThis contract pertains to a single cable assembly identified by NSN 5995-01-640-8210 and part number A3310866, with a required delivery of five days from the contract award, FOB origin. The item must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, including cybersecurity compliance at CMMC Level 2 through self-assessment. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with no special marking required, and palletization must meet DLA’s specific procurement packaging requirements. Sampling and inspection follow MIL-STD-1916 or equivalent zero-based plans, with critical, major, and minor attributes assigned verification levels or AQLs of VII, IV, II or 0.1, 1.0, and 4.0 respectively, and acceptance requires zero non-conformances unless otherwise stated. The supply is destined for Fort Stewart, Georgia, with delivery instructions mandating traceable freight methods and prohibit parcel post. The contract is under solicitation SPE4A0-26-T-3870 with a response deadline of July 21, 2026, and the item is classified under NAICS code 444180. All components must be physically identified per RQ017, and any non-accepted supplies must have government identification removed. The point of contact for the contract is Tiffany Shell of the Department of Defense, Aviation Supply Chain ESOc Buys.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

8 days ago

DEADLINE

in about 1 hour
View Details
NAICS: 444180
DIBBS
MICROCIRCUIT, LINEARThis contract is for the procurement of a linear microcircuit under Federal Supply Class 5962, with specific technical, quality, and traceability requirements governed by DLA directives and standards. The item, identified by NSN 5962-01-469-8526 and part number 10047-9792-01 from Simmonds Precision Products Inc, requires strict compliance with supply chain traceability documentation per DLA Procurement Note C03, including submission of the DLA Land and Maritime Form 918 with full test or traceability reports. Shipment cannot proceed without written authorization from the contract administrator, and any deviation from the approved documentation will void payment. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, with cushioning meeting A-A-59136 Class 1 Grade B specifications or equivalent ESD-protective form-fitting containers. Each unit pack must be labeled in accordance with IPC/JEDEC J-STD-609 to indicate lead finish compliance, with markings placed as specified. The contract mandates retention of all supply chain documentation by the contractor and requires compliance with the Qualified Suppliers List of Distributors and Qualified Testing Suppliers List for electronic microcircuits. The item is classified as a critical application component with covered defense information potentially applying, and surplus product is not acceptable. All shipments must be delivered FOB origin within 146 days, with a fixed quantity of three units and zero variance allowed. Documentation emails must be under 15 MB, properly titled using the prescribed format, and include unredacted traceability or test reports. The delivery destination is the DLA Distribution DDWO in Columbus, Ohio, and the contract requires adherence to DLA packaging requirements and transportation directives C19 and C20. The solicitation number is SPE7M0-26-T-003D, with a response deadline of July 23, 2026, and the procurement is managed by the Department of Defense’s Maritime Supply Chain Esoc Buys.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

9 days ago

DEADLINE

in 2 days
View Details
NAICS: 444180
DIBBS
CIRCUIT CARD ASSEMBThis contract specifies the procurement of a single circuit card assembly identified by NSN 5998-01-622-9377 under solicitation SPE7M1-26-Q-1225, with a firm fixed price and no variance allowed in quantity. The item is designated as a critical application component, requiring strict adherence to technical and quality standards incorporated by reference from the DLA Master List of Technical and Quality Requirements, including cybersecurity compliance at CMMC Level 2 via self-assessment. Packaging must conform to MIL-STD-2073-1E and DLA-specific requirements, with marking following MIL-STD-129 and no special marking code applied. Palletization and shipping must comply with DLA packaging standards, and the item must be shipped by the fastest traceable means, explicitly prohibiting parcel post. Delivery is required 215 days after the award date to the FPO AE 09575 destination aboard the USS JAMES E WILLIAMS DDG 95, with freight arrangements governed by specific DLA procedural notes. The supply is subject to strict material restrictions, including a complete prohibition on the intentional addition of mercury or mercury-containing compounds except for specific functional uses in batteries, fluorescent lights, weapons systems, or instruments explicitly authorized by NAVSEA, with portable devices containing mercury requiring shockproof design and a secondary containment boundary per NAVSEA 5100-003D. The contract also mandates the removal of government identification from non-accepted supplies and incorporates covered defense information protocols. The item is to be accepted at destination under inspection terms, with the vendor required to meet the delivery deadline of June 30, 2026, and is linked to a specific purchase request number. The contract was issued by the Department of Defense through the Maritime Supply Chain, with Ryan Snyder as the primary point of contact, and is governed under a federal acquisition framework using the DoD unit of issue system.
MARITIME SUPPLY CHAIN

POSTED

13 days ago

DEADLINE

in 2 days
View Details
NAICS: 444180
Federal
Building SuppliesThe Indian Health Service has forecasted a future procurement for building supplies to support new construction projects, with the North American Industry Classification System code 444180 indicating the focus on retail building materials. The opportunity is not yet solicited, and no set-aside provisions or contract type details have been specified. The place of performance and organizational address have not been defined, suggesting potential flexibility or pending determination of project locations. Tim Jim is listed as the program point of contact for inquiries, while Sean Long serves as the contracting officer overseeing the process. This forecast is posted for industry awareness and should not be treated as a binding solicitation. Stakeholders are encouraged to monitor the official opportunity forecast link for future solicitation notices and detailed requirements.
Indian Health Service

POSTED

about 2 months ago

DEADLINE

N/A
View Details

More opportunities from Department Of Defense → ACTIVE DEVICES DIVISION

Same awarding agency

NAICS: 541512
New
DIBBS
WAWF Invoicing and Payment Processing ServicesThe contract requires the submission of electronic invoices and receiving reports through the Wide Area WorkFlow system in strict adherence to DFARS 252.232-7006, utilizing either the Invoice 2in1 format or the standard electronic formats prescribed by the Department of Defense. All submissions must be accurately structured and timely delivered to ensure compliance and proper payment processing. The work is scoped under a subcontract and is assigned the NAICS code 541512, indicating a focus on computer systems design and related services. Performance is tied to the location of New Cumberland with ZIP code 17070-5002, and the contracting activity falls under the Active Devices Division of the Department of Defense. The solicitation was posted on July 20, 2026, with responses due by August 4, 2026, and participation is conducted via the DIBBS portal using the provided solicitation number.
Computer Systems Design Services

POSTED

about 23 hours ago

DEADLINE

in 14 days
View Details
NAICS: 493190
New
DIBBS
Military Packaging, Marking, and Shipping Compliance ServicesThe contract requires comprehensive packaging, preservation, and marking services fully aligned with MIL-STD-2073-1E and MIL-STD-129 standards, ensuring military-grade compliance for all handled items. Specifically, dry preservation method 10 must be applied to protect equipment from environmental degradation, while unit packaging under Pack Code U ensures items are individually prepared for efficient handling and distribution. All packages must be marked using DoDAAC-based routing protocols to guarantee accurate tracking and delivery through defense logistics networks. The work is tied to a subcontract under the ACTIVE DEVICES DIVISION of the Department of Defense, with performance centered at New Cumberland, Pennsylvania, ZIP 17070-5002. The North American Industry Classification System code 493190 indicates the service falls under Other Support Activities for Transportation, emphasizing logistics and handling specialization rather than manufacturing. Proposals must be submitted by August 4, 2026, with the solicitation open since July 20, 2026, and no set-aside provisions specified for small business or other categories.
Other Warehousing and Storage

POSTED

about 23 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334417
New
DIBBS
Manufacturing of Military-Grade Electrical Connector Body, ReceptacleThe contract requires the manufacture of 18 units of a military-spec electrical connector body, receptacle, identified by Part No. A-A-55463-06 and NSN 5935-01-323-6812, fully compliant with A-A-55463A Revision A, Generation 4, and DLA RA001 specifications. The work must be performed to exacting military standards ensuring reliability and performance under operational conditions, with the finished products destined for use in defense applications. The NAICS code 334417 indicates this falls under the category of Electronic Component and Product Manufacturing, emphasizing precision fabrication and adherence to technical and quality control requirements. The solicitation is classified as a subcontract and was posted on July 20, 2026, with responses due by August 4, 2026. Performance is to occur at the facility located in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The contract is managed by the Active Devices Division under the Department of Defense, which oversees procurement for critical military electronics components. The precise location of performance and the strict compliance requirements indicate that the contractor must have the necessary certifications and capabilities to meet defense-grade production and inspection standards. The contract will be administered through the DLA DIBBS system using the referenced solicitation number SPE7M526Q0741.
Electronic Connector Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 14 days
View Details
NAICS: 541611
New
DIBBS
Small Business Subcontracting and Accelerated Payments AdministrationThe contract requires comprehensive administration of subcontracting activities designated exclusively for small businesses under a Total Small Business Set-Aside, as defined by FAR 19.5, with the NAICS code 541611 for management consulting services. The performance location is situated in Cherry Point, North Carolina, with all subcontracting obligations governed by the Federal Acquisition Regulation, particularly the requirement to implement accelerated payments as specified in FAR 52.232-40. The contractor must systematically track all small business subcontractors, maintain accurate records, and submit mandatory reports through the Electronic Subcontracting Reporting System to ensure full compliance with federal guidelines. The contract emphasizes strict adherence to payment timelines for small business subcontractors, with the expectation that payments are accelerated in accordance with the specified regulation. The effort is managed under the Department of Defense and administered by the Active Devices Division, with a response deadline of July 31, 2026, following the posting date of July 20, 2026. No solicitation number is listed, reinforcing the focus on the regulatory structure and administrative rigor required to uphold small business participation and payment integrity. The place of performance and the nature of the work indicate a high degree of coordination with government systems and compliance reporting under defense contracting protocols.
Administrative Management and General Management Consulting Services

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541511
New
DIBBS
Prohibited Telecommunications Equipment Screening and ReplacementThis contract requires the identification and replacement of prohibited telecommunications equipment sourced from vendors such as Huawei and ZTE across IT assets, in full compliance with DFARS 252.204-7018. The work involves conducting thorough audits to detect any covered telecommunications equipment or services that are deemed a security risk, followed by the timely removal and substitution with approved alternatives to ensure system integrity and regulatory adherence. The project must be executed within the designated place of performance at Cherry Point, North Carolina, with strict attention to timelines and audit accuracy to meet federal defense specifications. The opportunity is structured as a small business set-aside under the SBA’s Total Small Business Set-Aside category, exclusively available to small businesses as defined by FAR 19.5, and is classified under NAICS code 541511 for computer systems design services. The solicitation was posted on July 20, 2026, with responses due by July 31, 2026, and is issued under the Department of Defense through the Active Devices Division. Contractors must be prepared to deliver compliant solutions under subcontract terms and demonstrate established processes for equipment verification, documentation, and secure logistics during the replacement phase.
Custom Computer Programming Services

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance and CMMC ImplementationThis contract requires the implementation of NIST SP 800-171 cybersecurity controls to achieve compliance with CMMC Level 2 standards, focused on system hardening, robust access controls, and comprehensive audit logging across all relevant systems and environments. The effort is scoped to ensure the contractor meets the Department of Defense’s cybersecurity requirements for handling controlled unclassified information, with the ultimate goal of passing a formal CMMC Level 2 assessment. Work must be performed at Cherry Point, North Carolina, with all security measures aligned to federal guidelines and tailored to the specific infrastructure and operational context of the Active Devices Division. The contract is structured as a small business set-aside under SBA requirements, exclusively available to businesses classified as total small businesses as defined by FAR 19.5, and falls under NAICS code 541512 for computer systems design services. The solicitation was posted on July 20, 2026, with responses due by July 31, 2026, and all proposals must demonstrate clear expertise in NIST framework application, CMMC readiness, and defense contracting compliance. The successful vendor will be responsible for documenting control implementation, maintaining audit trails, and providing evidence of continuous compliance, all in support of securing sensitive defense-related systems at the specified location.
Computer Systems Design Services

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Labeling and Safety ComplianceThe contract requires the provision of hazard warning labels and safety data sheets that fully comply with OSHA’s Hazard Communication Standard and DFARS clause 252.223-7001, ensuring proper identification and communication of chemical hazards across military supply chains. All labeling must adhere to MIL-STD-129 specifications for uniformity and durability, and the vendor must implement a robust system for managing and maintaining up-to-date safety data sheets for all hazardous materials. This subcontract is set aside entirely for small businesses as defined by the SBA and is categorized under NAICS code 541690 for other scientific and technical consulting services. The performance location is designated as Cherry Point, North Carolina, with a response deadline of July 31, 2026, and the solicitation is issued by the Department of Defense’s Active Devices Division through the DIBBS platform.
Other Scientific and Technical Consulting Services

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details
NAICS: 484220
New
DIBBS
Domestic Freight & Logistics (U.S.-Flag Vessel Requirement)The contract requires the transportation of goods via U.S.-flag vessels for overseas shipments, with a clear mandate to use American-owned and operated vessels for international freight. For domestic logistics, the contractor must coordinate the movement of cargo to DLA Distribution in Columbus, Ohio, ensuring timely and secure delivery to the specified zip code 43213. The scope encompasses end-to-end logistics planning and execution, including handling, scheduling, and compliance with U.S. maritime regulations for overseas segments. All work must align with the North American Industry Classification System code 484220, which pertains to general freight trucking, and is structured as a subcontract under the Department of Defense’s Active Devices Division. Responses are due by July 31, 2026, following a posting date of July 20, 2026, and the solicitation is accessible through the DIBBS platform for potential bidders.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541611
New
DIBBS
Compliance & Cybersecurity SupportThe contract seeks advisory or audit support to ensure adherence to critical cybersecurity standards including DFARS 252.204-7012, NIST SP 800-171, and CMMC Level 2 requirements. The primary focus is on facilitating a thorough self-assessment process and generating comprehensive documentation to demonstrate compliance with these defense-related cybersecurity frameworks. This support is essential for organizations handling controlled unclassified information and must be delivered with precision to meet federal contractual obligations. The work is classified as a subcontract under NAICS code 541611, with performance centered in Columbus, Ohio, 43213. The solicitation was posted on July 20, 2026, and responses are due by July 31, 2026, under the purview of the Department of Defense’s Active Devices Division. No specific set-aside type is indicated, and the contract aims to secure expert services that will directly contribute to the contractor’s ability to validate and maintain cybersecurity compliance in alignment with Department of Defense mandates.
Administrative Management and General Management Consulting Services

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details
NAICS: 326199
New
DIBBS
ESD/EMI Protective Packaging SupplyThe contract calls for the supply of electrostatic discharge and electromagnetic interference protective packaging materials that meet the stringent requirements of MIL-PRF-81705, specifically including Type I and Type III barrier materials. All materials must be sourced exclusively from manufacturers listed on the Qualified Products List QPL-81705 to ensure compliance with military-grade standards for ESD and EMI protection. The packaging is intended for use in sensitive electronic applications where environmental and static control are critical to mission success. This subcontract is issued by the Active Devices Division under the Department of Defense, with performance required at a location in Columbus, Ohio with the zip code 43213. The solicitation was posted on July 20, 2026, and responses are due by July 31, 2026. The North American Industry Classification System code 326199 indicates the focus is on other rubber product manufacturing, aligning with the specialized nature of the protective packaging materials. There is no set-aside designation specified, and all qualified vendors meeting the technical and sourcing requirements are eligible to respond.
All Other Plastics Product Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334418
New
DIBBS
Supply of Linear Microcircuit (NSN: 5962011999837)The contract calls for the procurement and delivery of twenty units of a linear microcircuit identified by National Stock Number 5962011999837, which must fully comply with applicable military specifications. Each unit requires proper packaging and labeling to meet defense logistics standards, ensuring traceability and readiness for military use. The finished product must be shipped to DLA Distribution in Columbus, Ohio, with the delivery address designated by the zip code 43213. This is a subcontract under the Department of Defense’s Active Devices Division, classified under NAICS code 334418 for other semiconductor and related device manufacturing. The solicitation was posted on July 20, 2026, with responses due by July 31, 2026, leaving a narrow window for qualification and proposal submission. While no set-aside designation or point of contact details are provided, the requirement is specific, time-sensitive, and aligned with defense supply chain protocols, emphasizing strict adherence to technical and logistical directives for military-grade electronics.
Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541330
New
DIBBS
Inspection and Quality Assurance Services (MIL-STD-1916 Compliance)The contract requires the execution of final inspection services for capacitors under strict quality standards, specifically employing MIL-STD-1916 or ASQ H1331 sampling plans to ensure zero non-conformances and full compliance with accepted quality levels for critical, major, and minor defects. The work must be performed to exacting military and industry benchmarks, emphasizing the absolute absence of defects in every inspected unit, making precision and rigorous quality control paramount. The inspection process is non-negotiable in its requirements, leaving no room for tolerance in adherence to the specified standards. The contract is a subcontract under the Department of Defense’s Active Devices Division, with performance expected at a designated location in New Cumberland, Pennsylvania, ZIP code 17070-5002. Issued under NAICS code 541330 for Engineering Services, the opportunity is open for response until July 31, 2026, with posting dated July 20, 2026. All submissions must meet the demanding compliance criteria without deviation, and bidders must be fully prepared to deliver flawless inspection outcomes aligned with defense-quality expectations.
Engineering Services

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details