Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

ANALYZER, ELECTRONIC

Active
SPE2DH-26-T-5799Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of one electronic analyzer, specifically an Oil Test Centre, Version F, designed for medical acquisition use. The device operates on AC power with a voltage range of 110.0 to 240.0 volts and features a circuit-based indicator type. It must be delivered as a complete unit, properly packaged in a sealed container capable of preventing damage or breakage, and shipped in commercial exterior containers that ensure safe transport via common carrier at the lowest possible rate to the specified delivery point. All packaging and marking must comply with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and detailed marking instructions are available through DLA Troop Support. The item is identified by NSN 6630-01-498-9905 and is subject to technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. The contract prohibits the intentional use of mercury or mercury-containing compounds in the device or its components, except for functional applications in batteries, fluorescent lights, specified instruments, sensors, controls, weapon systems, and chemical analysis reagents as defined by NAVSEA. Portable fluorescent lamps or instruments containing mercury must be shockproof and include a secondary containment boundary to prevent leakage, in accordance with NAVSEA 5100-003D. Bidders are required to specify the exact source and part number being offered, and the response deadline is August 11, 2026, with delivery expected within 20 days after award. The contract is administered under solicitation SPE2DH-26-T-5799 by the Department of Defense’s Medical Supply Chain FSH, with Tina Vu as the primary point of contact.

General Info

Procure one Oil Test Centre Version F medical analyzer, AC 110–240V, shipped compliantly, no mercury, delivered in 20 days.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIIN FSHView Agency

NAICS

423450 - Medical, Dental, and Hospital Equipment and Supplies Merchant WholesalersView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(1)

SPE2DH-26-T-5799.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIIN FSH
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIIN FSH
View Agency Profile
Office AddressUS
Contacts
Tina Vu
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
ANALYZER,ELECTRONIC
ANALYZER<(>,<)> ELECTRONIC<(>,<)> OTC
CONSOLE, OTC, VERSION 3XX; INDICATOR TYPE IS CIRCUIT; ELECTRICAL POWER
SOURCE IS OPERATING; AC VOLTAGE RATING IS 110.0 MIN AND 240.0 MAX
END ITEM IDENTIFICATION: OIL TEST CENTRE, VERSION F
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
UNIT ISSUE: EA (EACH) .. RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
..
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
..
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
..
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
..
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
SPE2DH-26-T-5799
SECTION B
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
BIDDER: PLEASE SPECIFY SOURCE AND PART
NUMBER BEING SUPPLIED.
ADEQUATE DATA FOR THE NSN/Part Number: 6630-01-498-9905 Quantity: 1 EA Purchase Request: 7017735490QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 423450
New
DIBBS
BRUSH, SURGICAL SCRU
Solicitation # SPE2DH-26-T-5787
The contract specifies the procurement of 4 packages, each containing 300 disposable surgical scrub brushes, for a total of 1,200 units. Each package must consist of 10 dispensers, with each dispenser holding 30 brushes, and all packaging must comply with commercial standards and be sealed to protect against damage during transit. The product must have a minimum shelf life of 24 months, with no more than three months elapsed between the manufacturer’s date and delivery to the government. All labeling must include the date of manufacture, expiration or retest date, contract number, and lot number, following the latest revision of Medical Marking Standard No. 1, which replaces MIL-STD-129. The brushes are to be shipped in commercial exterior containers suitable for safe delivery via common carrier to Ellsworth AFB, South Dakota, with delivery required within 20 days of award. Suppliers must provide the source and part number for the product, and all items must conform to technical and quality requirements listed in the DLA Master List. The procurement is under solicitation SPE2DH-26-T-5787, with responses due by August 11, 2026, and is managed by the Department of Defense’s Medical Supply Chain FSH.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 423450
New
DIBBS
DRESSING, OCCLUSIVE,
Solicitation # SPE2DS-26-T-305R
The contract specifies the procurement of sterile occlusive petrolatum gauze dressings measuring 3 by 18 inches, with a unit of issue as each. These dressings must have a minimum shelf life of 36 months from the date of manufacture, and no more than five months may have elapsed between the manufacturer’s date and delivery to the government. Labeling must include the date of manufacture, expiration or retest date, contract number, and lot number, in strict accordance with Medical Marking Standard No. 1, which supersedes MIL-STD-129. All packaging must be commercial and designed to protect the product from damage, with each unit sealed in a suitable container and grouped in commercial shipping containers that ensure safe, low-cost delivery to Fort Hood, Texas. The product must comply with all applicable DLA packaging and marking requirements, and bidders must clearly identify the source and part number being supplied. The National Stock Number is 6510-01-532-4289, with a quantity of six units required, and delivery must occur within 20 days of award. The solicitation, issued under SPE2DS-26-T-305R, includes technical and quality requirements referenced in the DLA Master List, and the item is classified as a Type I (Code Q) shelf-life item with a non-extendable 36-month life. The solicitation closed on August 10, 2026, and the contract is administered by the Department of Defense through the Medical Supply Chain MD Surg FSF.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 15 hours ago

DEADLINE

in 5 days
View Details
NAICS: 423450
New
DIBBS
BAG, STERILIZATION-BIOH
Solicitation # SPE2DH-26-T-5780
The contract is for the procurement of heavy-duty, puncture-resistant biohazard disposal bags in red or orange coloring to indicate contamination, specifically for autoclaving biologically contaminated materials such as culture dishes prior to disposal. The unit of issue is a package containing 200 units, and the item is identified by NSN 6530-01-078-0365 with the part numbers assigned to MEDEGEN MEDICAL PRODUCTS, LLC and BAXTER HEALTHCARE CORP. The procurement is governed by DLA’s technical and quality requirements referenced in the DLA Master List, with packaging and marking required to comply with Medical Marking Standard No. 1, replacing all prior references to MIL-STD-129. Each unit must be sealed in a protective container, and shipping containers must ensure safe, cost-effective delivery to the destination point while adhering to commercial packaging standards. The delivery is FOB destination within 20 days, with zero variance allowed in quantity, and inspection and acceptance occur at the delivery point. Packaging must follow MIL-STD-2073-1E, and all items are subject to Covered Defense Information requirements. The solicitation number is SPE2DH-26-T-5780, posted August 4, 2026, with proposals due by August 11, 2026, and the point of contact is Tina Vu of the Department of Defense’s Medical Supply Chain FSH.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 423450
New
DIBBS
OMEPRAZOLE EXTENDED-RE
Solicitation # SPE2DP-26-T-4490
OMEPRAZOLE EXTENDED-RELEASE CAPSULES, 20 MG delayed-release, are procured in 90-count bottles under unit of issue BT, with each bottle containing 90 capsules. The product must have a minimum shelf life of 21 months remaining upon delivery to the first government activity, with a total approved shelf life of 24 months that is non-extendable. All packaging and marking must conform to Medical Marking Standard No. 1, superseding MIL-STD-129, and must ensure protection from damage during transit. Packaging must be commercial grade, using sealed unit containers and appropriately labeled commercial shipping containers suitable for safe delivery via common carrier at the lowest rate to the destination. The item is subject to FDA regulation and requires pre-award confirmation through EBS referral by the contracting official. The supplier must be Sandoz Inc. with NDC 00781-2868-92, and delivery must be FOB destination within 20 days of the contract award. The shipment must be sent via traceable means, excluding parcel post, to Fort Campbell, Kentucky, and must be palletized according to DLA packaging requirements. The material is not classified as hazardous per FED-STD-313 and must be packaged in compliance with ASTM D3951, unless higher DLA technical requirements override it. All labeling, packaging, and documentation must strictly follow DLA’s Master List of Technical and Quality Requirements, and the contract includes a zero tolerance for quantity variance.
MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

about 15 hours ago

DEADLINE

in 5 days
View Details
NAICS: 423450
New
DIBBS
END PLUG, VISCOMETER
Solicitation # SPE2DH-26-T-5801
The contract pertains to the procurement of an end plug for a viscometer, specifically designated for use at an oil test center and identified by the NSN 6630-01-498-9904, with a unit of issue of one each. The requirement is for a single unit under purchase request 7017735493, with delivery expected within 20 days after order. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, and the applicable revision is determined by the solicitation issuance or award date depending on the acquisition size. Packaging must comply with DLA standards, and non-accepted supplies must have all government identification removed prior to return. The solicitation number is SPE2DH-26-T-5801, posted on August 4, 2026, with a response deadline of August 11, 2026. The acquisition is classified under NAICS code 423450, managed by the Department of Defense through the Medical Supply Chain FSH office, with performance required in Pascagoula, Mississippi, 39568. Primary point of contact is Tina Vu, reachable via email and phone provided.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 423450
New
DIBBS
MANUAL, OTC, TECHNICA
Solicitation # SPE2DH-26-T-5804
This contract pertains to the procurement of a single unit of a regulated medical item identified by NSN 6630014989899 and part number MA-K-10368-6, supplied by DISTRIBUTION SPECIALISTS INC, under solicitation SPE2DH-26-T-5804. The item is subject to strict packaging and marking requirements dictated by the DLA Master List of Technical and Quality Requirements, which override all other standards including ASTM D3951 and MIL-STD-129; instead, packaging must comply with Medical Marking Standard No. 1, available through DLA Troop Support. The product must be sealed in a protective unit container and packed in commercial shipping containers suitable for safe transport at the lowest cost to the designated destination, with no tolerance for quantity variance. The item is regulated by the FDA, requiring referral through EBS for confirmation prior to award, and must include full supplier and manufacturer details. Mercury or mercury-containing compounds are prohibited except in specific functional applications such as batteries, fluorescent lamps, and medical instruments, which must be shockproof and equipped with secondary containment per NAVSEA 5100-003D. Delivery is required FOB destination within 20 days of contract award, with inspection and acceptance also occurring at the destination. Shipping must utilize traceable methods only, explicitly excluding parcel post, and must be directed to the vessel shipment address for USS KANSAS CITY LCS 22 via DLA Vendors using VSM and RDD 777. The contract mandates palletization in accordance with RP001 and adherence to all applicable DLA packaging directives. The government requires specific tracking and administrative codes including DIC A4A, DIST 9B, and FC NR, and the original required delivery date is August 6, 2026, with an assigned project code ZJ7 TP 2 and supplier identifier YNEA01. Contact for inquiries is Tina Vu at DLA, and the solicitation closed on August 11, 2026, with the item classified under NAICS 423450 for medical and surgical equipment distribution.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 423450
New
DIBBS
CORD, POWER, OTC
Solicitation # SPE2DH-26-T-5797
A power cord measuring six feet in length is being solicited under a federal procurement initiative for a single unit, identified by NSN 6630-01-498-9896 and designated as OTC. The requirement is part of purchase request number 7017735492, with delivery expected within 20 days of award, and bidders must clearly indicate the source and part number they intend to supply. The solicitation is issued under contract number SPE2DH-26-T-5797, posted on August 4, 2026, with responses due by August 11, 2026, and falls under NAICS code 423450 for electrical equipment and supplies wholesale. The procuring entity is the Medical Supply Chain FSH within the Department of Defense, with performance to take place at an FPO address with ZIP code 96694. Primary contact for inquiries is Tina Vu, reachable via email and phone listed in the solicitation, and full details are accessible through the DIBBS online portal.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 423450
New
DIBBS
DISPOSAL CONTAINER, HYP
Solicitation # SPE2DH-26-T-5789
The contract specifies the procurement of a transparent red, autoclavable, snap-lid disposal container designed for hypodermic needles and syringes, with a nominal capacity of 5.0 quarts and dimensions of 4.75 inches in depth, and 11 inches in both height and width. Each unit is packaged as a PG, where one PG equals 20 individual containers, and the outer container is made of plastic. The product must comply with DLA packaging requirements and is subject to the DLA Master List of Technical and Quality Requirements, which governs applicable specifications. The container must not contain any heavy metal constituents such as chromium or lead capable of generating hazardous waste. Packaging must adhere to Commercial packaging standards and the Medical Marking Standard No. 1, replacing all references to MIL-STD-129, and must ensure protection from damage during transit in suitable shipping containers. Each unit must be distinctly marked in accordance with the specified medical marking standard and delivered FOB destination within five days of award. The item, identified by NSN 6530-01-283-0098 and manufacturer part number 85131 by COVIDIEN SALES LLC, is regulated by the FDA, requiring a referral through EBS for confirmation. Inspection and acceptance occur at the destination, with zero variance allowed in quantity, and delivery is targeted to Fort Lewis, Washington. The contract falls under the NAICS code 423450 and is issued by the Department of Defense’s Medical Supply Chain FSH.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 423450
New
DIBBS
DRAPE, SURGICAL
Solicitation # SPE2DH-26-T-5770
The contract is for the procurement of 4 packages of surgical drapes, each containing 40 disposable, sterile, antimicrobial adhesive drapes measuring 35 inches by 23 inches and impregnated with IOBAN. The item is identified by NSN 6530-01-181-8247 and must be delivered within 20 days of award. All units must be sealed in individual containers that protect against damage and packed in commercial shipping containers suitable for safe transport at the lowest cost to the delivery point at Fort Hood, Texas. Packaging and marking must comply with Medical Marking Standard No. 1, which replaces all references to MIL-STD-129, and copies of this standard are available through DLA Troop Support. The procurement falls under the NAICS code 423450 and is managed by the Department of Defense’s Medical Supply Chain FSH. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Government identification must be removed from non-accepted supplies, and all data provided must be adequate to support compliance with federal procurement standards. The solicitation number is SPE2DH-26-T-5770, with a response deadline of August 11, 2026, and primary point of contact is Tina Vu.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 423450
New
DIBBS
DRAPE, SURGICAL
Solicitation # SPE2DH-26-T-5764
The contract specifies the procurement of surgical drapes, specifically an adhesive U-drape measuring 47 inches by 51 inches with a U-slot opening of 20 by 6.375 inches, designed to be impervious for sterile surgical use. Each unit is packaged in a sealed container to prevent damage or contamination, with 40 units per package, and a total of two packages are ordered. The product must maintain a 36-month shelf life from the date of manufacture, with no more than six months elapsed between manufacturing and delivery to the government. Packaging and marking must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and all units must be shipped in commercial exterior containers suitable for safe transit by common carriers at the lowest rate to the designated delivery point at Fort Hood, Texas. The material must be marked per DLA’s medical marking guidelines, and all packaging requirements align with DLA’s RP001 standards. The NSN is 6530-01-150-3925, with a solicitation number SPE2DH-26-T-5764 issued on August 4, 2026, and responses due by August 11, 2026. Delivery is required within 20 days of award. The contracting authority is the Department of Defense under the Medical Supply Chain FSH, and the primary point of contact is Tina Vu.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 423450
New
DIBBS
TEST PAPER, CHLORINE DE
Solicitation # SPE2DH-26-T-5766
The contract specifies the procurement of chlorine determination test paper, designed for accurate chlorine level measurement with a color chart ranging from 10 to 200 ppm, supplied in two 15-foot rolls of 5/32 inch width, sufficient for 200 tests. Each package contains ten units, with a total order of four packages. The product is governed by the procurement document SPE2DH-26-T-5766 and must comply with the DLA Master List of Technical and Quality Requirements, including packaging standards under RP001, removal of government identification from non-accepted supplies under RQ011, and medical marking requirements per Medical Marking Standard No. 1, which supersedes MIL-STD-129. All units must be sealed in commercial-quality containers and packed in exterior shipping containers suitable for safe, cost-effective transport to the delivery point at Arcadia, ZIP 34266-8836. The item has a non-extendable shelf life of 36 months, with no more than five months allowed to have passed from the date of manufacture to the date of government delivery. Labeling must include the date of manufacture, expiration or retest date, and the contract number or lot number, following the latest revision of MMS1C. The NSN is 6630-01-012-4093, and delivery is required within 20 days of award. The solicitation, issued on August 4, 2026, with a response deadline of August 11, 2026, is managed by the Department of Defense’s Medical Supply Chain FSH, with Tina Vu as the primary point of contact. Covered defense information provisions and applicable DLA packaging requirements must be fully adhered to, ensuring compliance with federal procurement standards.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 423450
New
DIBBS
BATTERY, ANALYZER, RECHA
Solicitation # SPE2DH-26-T-5765
The contract specifies the procurement of two rechargeable batteries for the ISTAT Analyzer, identified by NSN 6630-01-526-4098, with a required delivery within 20 days of award. Each unit must be packaged in a sealed container designed to prevent damage or breakage, and all shipments must use commercial exterior shipping containers that ensure safe, cost-effective delivery to the point of performance at JBPHH, Hawaii, under the lowest available freight rates. All labeling and marking must comply with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and bidders are required to provide the source and part number of the batteries being offered. The acquisition falls under a simplified procurement process governed by the DLA Master List of Technical and Quality Requirements, with packaging standards defined by DLA and applicable to all medical acquisitions. Technical and quality requirements are incorporated by reference, and bidders must ensure compliance with all DLA packaging and marking directives, including the potential application of covered defense information. The solicitation, issued under SPE2DH-26-T-5765, has a response deadline of August 11, 2026, and is administered by the Defense Logistics Agency through the Medical Supply Chain FSH, with Tina Vu as the primary point of contact.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIIN FSH

Same awarding agency

NAICS: 333248
New
DIBBS
SCOOP, LABORATORY
Solicitation # SPE2DH-26-T-5776
The contract specifies the procurement of sterile, disposable, individually sealed laboratory scoops manufactured from polystyrene plastic, intended for retrieving samples from larger sources. The product is white in color and supplied in boxes of ten units each, with a total order quantity of three boxes. The items are classified under NSN 6640-01-722-5866 and must comply with technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the type of acquisition. Packaging must adhere to DLA packaging standards, and any non-accepted supplies must have government identification removed prior to return. Delivery is required within twenty days after issuance, and performance will occur at APO 96278-2060. The solicitation, issued under SPE2DH-26-T-5776, was posted on August 4, 2026, with responses due by August 11, 2026. The contracting authority is the Department of Defense through the Medical Supply Chain FSH, with Tina Vu listed as the primary point of contact.
All Other Industrial Machinery Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334516
New
DIBBS
MEASURING TUBE, GAS ANA
Solicitation # SPE2DH-26-T-5802
The measuring tube for gas analyzer is designed specifically to measure carbon dioxide content in compressed gases with a precise range of 100 to 3000 parts per million for one liter of air. It is constructed as a glass tube with melted tips for safe handling and is supplied in packages of ten units under the unit of issue PG. The item is governed by the DLA Master List of Technical and Quality Requirements, with applicable technical and quality standards referenced by R or I numbers. It is classified as a Type I (Code M) medical item with a mandatory non-extendable shelf life of 24 months, requiring that no more than three months have elapsed from the date of manufacture to the date of government delivery. All packaging must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and labels must clearly indicate the date of manufacture, expiration or retest date, contract number, and lot number, following the latest revision of MMS1C. Packaging must ensure protection against damage and comply with DLA packaging requirements, using commercial-grade sealed containers and appropriate shipping packaging suitable for safe delivery via common carrier at the lowest cost to the specified point of delivery. The item is identified by NSN 6630-12-189-3126 and is procured under contract number SPE2DH-26-T-5802, with a required delivery within five days of award and a solicitation response deadline of August 11, 2026. Coverage of defense information applies, and removal of government identification from non-accepted supplies is required. The contracting office is under the Department of Defense, Medical Supply Chain FSH, with primary point of contact Tina Vu at the provided email and phone.
Analytical Laboratory Instrument Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
PANEL, MODULAR, HANGING
Solicitation # SPE2DH-26-T-5768
The contract is for a single unit of a modular hanging trauma panel designated by NSN 6530-01-515-7651, intended for rapid deployment in combat trauma care during CASEVAC operations. Constructed of black Cordura nylon, the panel is MOLLE compatible and designed to integrate seamlessly with military aircraft, ground vehicles, and fixed or temporary facilities. It features a comprehensive internal layout including four full-width storage pockets, one half-panel bellos pocket, and a total of ten modular pockets—six small, two medium, one long, and one flat—each labeled with removable low-light visibility markings to ensure quick identification under low-visibility conditions. The panel itself is marked internally and externally with low-light readable "TRAUMA" identifiers and supports immediate access to essential medical supplies, enabling effective "tail gate" medical response anywhere on the battlefield. The procurement falls under DLA packaging requirements and incorporates technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue date or award date depending on acquisition size. The solicitation number is SPE2DH-26-T-5768, issued on August 4, 2026, with bids due by August 11, 2026. Delivery is required within 20 days of award to Fort Bliss, Texas, 79918-2527. The contract is managed by the Department of Defense’s Medical Supply Chain FSH, with Tina Vu listed as the primary point of contact. Bidders must clearly identify the source and part number of the supplied item, and the purchase request number is 7017716143, with the unit of issue being each.
Surgical Appliance and Supplies Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
FILM, PCR PLATE SEALING
Solicitation # SPE2DH-26-T-5795
Ultra-high optical clarity polyester sealing film designed for PCR plate applications features a medical-grade adhesive that provides strong, seamless sealing while remaining non-absorbing, non-fluorescent, and compatible with real-time PCR workflows. The film is heat resistant and certified for use across a broad temperature range from -40°C to 120°C, with certification as DNase-, RNase-, and nucleic-acid-free to ensure contamination-free performance in sensitive molecular biology applications. Each unit is sold as a box of 100 films, is non-sterile, and is identified by NSN 6640-01-695-8471. The procurement is governed by technical and quality requirements from the DLA Master List, with packaging and handling compliance dictated by DLA standards including the removal of government identification from non-accepted supplies. The solicitation SPE2DH-26-T-5795, issued by the Department of Defense’s Medical Supply Chain FSH, requires delivery within 20 days of order and is targeted to Langley AFB with a response deadline of August 11, 2026. The primary point of contact is Tina Vu, reachable via email and phone provided in the contract data.
Surgical Appliance and Supplies Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
CONTAINER, TRANSPORT, TH
Solicitation # SPE2DH-26-T-5785
The contract specifies the procurement of thermal transport containers designed for the stable field transport of blood, vaccines, reagents, and pharmaceuticals, maintaining a strict temperature range of 1 to 10 degrees Celsius for up to 96 hours without the need for ice or external power, with guaranteed performance for at least 48 hours in any environmental condition. Each unit is passive, includes a canvas cover with straps, a temperature indicator, and phase change material, and is colored in three-color woodland camouflage to meet military specifications. The container dimensions are 10 x 9 x 10 inches externally and 6 x 5 x 6 inches internally, with a tare weight of approximately 6.8 pounds per unit. The items are supplied under part number PBT01176 by PELI BIOTHERMAL LLC and must be marked in strict compliance with the Medical Marking Standard No. 1, which supersedes all references to MIL-STD-129. Packaging and shipping must adhere to MIL-STD-2073-1E and DLA Packaging Requirements, ensuring each unit is sealed and protected from damage, packed in commercial shipping containers suitable for safe delivery via common carrier at the lowest rate, and shipped by traceable means—parcel post is prohibited. The contract is issued under solicitation SPE2DH-26-T-5785 with a total quantity of 3 units across four CLINs, each with a unit price ranging from $1.00 to $2.00, and a total price of $10.00. Delivery is required at destination FOB with no quantity variance allowed, and inspection and acceptance occur upon arrival. Required delivery dates are set for August 6 and 7, 2026, with a 20-day delivery window from the award date. All shipments must comply with DLA’s packaging and marking standards, and the supplies are not regulated by the FDA. The items will be delivered to multiple Department of Defense locations including Hurlburt Field, Florida and Nellis Air Force Base, Nevada, using designated freight addresses and military contact information. The contractor must specify the source and part number being supplied, and all documentation must reference the current DLA Master List of Technical and Quality Requirements as of the solicitation or award date.
Surgical Appliance and Supplies Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
WATER QUALITY ANALYSIS
Solicitation # SPE2DH-26-T-5603
The Water Quality Analysis Set is a compact, portable laboratory solution designed to monitor critical water quality parameters including chlorine levels from 0 to 3.4 mg/L and nitrates from 0 to 40 mg/L, along with presence-absence detection of total coliforms and E. coli. The set includes all necessary reagents for chemical testing, a portable incubator, a thermometer, a pocket-style pH and TDS tester, and required glassware, making it suitable for field use in remote or resource-limited environments. All components must have a minimum shelf life of 12 months, with no more than two months elapsed from the date of manufacture to the date of delivery to the government. Labels on all items must clearly display the NSN, manufacturer, CAGE code, date of manufacture, expiration or retest date, contract number, and lot number to ensure traceability and compliance. The contract is for one unit with NSN 6630-01-641-1591, under solicitation SPE2DH-26-T-5603, issued by the Department of Defense through the Medical Supply Chain FSH, with delivery required within 20 days of award to APO 09094-3219. Bidders must provide the specific source and part number being offered for submission.
Surgical Appliance and Supplies Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 2 days
View Details
NAICS: 339114
New
DIBBS
RUBBER DAM
Solicitation # SPE2DH-26-T-5788
The contract is for the procurement of rubber dams specifically identified as 6-inch non-latex Super Dam sheets, measuring 6 x 6 inches in teal green color, with each package containing 15 sheets. The item is listed under NSN 6520-01-717-7806 and is required in a single package quantity. The solicitation number is SPE2DH-26-T-5788, issued by the Department of Defense through the Medical Supply Chain FSH office, with a response deadline of August 11, 2026, and a required delivery within 20 days of award. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must meet DLA standards, and government identification must be removed from non-accepted supplies. The item may be subject to Covered Defense Information provisions, and bidders must clearly specify the source and part number being offered. Deliveries are to be made to the APO address with zip 09094-3219, and primary point of contact is Tina Vu at DLA.
Dental Equipment and Supplies Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339114
New
DIBBS
RESTORATIVE KIT, DENTAL
Solicitation # SPE2DH-26-T-5581
The contract specifies the procurement of two kits of a dental restorative product, GC Fuji II LC Capsule, a light-cured resin-reinforced material designed for dental restorations. Each kit contains 24 capsules totaling 0.33 grams of powder and 0.085 milliliters of liquid per capsule, distributed across five shades: five each of A1, A2, A3, and B2, and four of C2. The product must have a minimum 24-month shelf life, with no more than three months elapsed between the date of manufacture and delivery to the government. Packaging must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and include clear labeling of the manufacture date, expiration date, and contract or lot number. Each unit must be sealed in a protective container and packed in commercial shipping containers suitable for safe transport via common carrier to the specified delivery point in Suffolk, Virginia, at the lowest possible rate. The kits must be marked according to MMS1A standards, and bidders are required to provide the source and part number being supplied. This procurement is governed by DLA’s Master List of Technical and Quality Requirements, and the NSN is 6520-01-644-3304, with a delivery deadline of five days after award.
Dental Equipment and Supplies Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 2 days
View Details
NAICS: 339113
New
DIBBS
CYLINDER, UNGRADUATED, L
Solicitation # SPE2DH-26-T-5803
The contract specifies the procurement of three ungraduated laboratory cylinders, each with a capacity of 600 milliliters, made from borosilicate glass with an outer diameter of 51 millimeters and an internal depth of 360 millimeters. These items are classified under the NSN 6640-01-459-4425 and must be delivered within five days of award. The purchase is part of a federal solicitation issued under contract number SPE2DH-26-T-5803, with a response deadline of August 11, 2026, and the solicitation was posted on August 4, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed prior to return. The contracting office is under the Department of Defense's Medical Supply Chain FSH, with performance location in Pascagoula, Mississippi, and primary point of contact is Tina Vu, reachable via email and phone provided.
Surgical Appliance and Supplies Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
POSITIONING BLOCK, H
Solicitation # SPE2DH-26-T-5805
The contract specifies the procurement of five sets of two positioning blocks for head support, designated as North American Rescue, LLC part number 50-0042 with NSN 6530-01-477-9448, to be used exclusively with the Rescue Sleeve II. Each unit must be black, washable, and packaged in sealed individual containers that protect against damage, with exterior shipping containers compliant with commercial standards to ensure safe, cost-effective delivery to Fort Campbell, Tennessee, within ten days of contract award. All items must be marked according to Medical Marking Standard No. 1, superseding MIL-STD-129, and comply with DLA packaging requirements. The item is classified as a critical application item and is not regulated by the FDA. Mercury or mercury-containing compounds are strictly prohibited unless functionally necessary in batteries or fluorescent lamps, which must then include a secondary containment per NAVSEA 5100-003D. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with the revision in effect on the solicitation issue date controlling. Bidders must provide the source and part number, and delivery is FOB destination with zero variance allowed in quantity. Inspection and acceptance occur at the delivery point, and all documentation must align with the authorized DoD unit of issue as defined by ANSI X12.
Surgical Appliance and Supplies Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 5 days
View Details
NAICS: 453998
New
DIBBS
STUDY CARD
Solicitation # SPE2DH-26-T-5772
The study card is a paper-based item measuring 5 inches by 4 inches, intended for use with the Explosive Ordnance Disposal Tool Kit identified by NSN 1385-01-565-1626. It is supplied as a single unit and is specifically tied to the part number 6910-01-612-6510 with a required quantity of one. The item is subject to technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which must be accessed online, and compliance is governed by the revision of the master document in effect at the time of solicitation or award depending on the acquisition size. The contract includes a requirement for the removal of government identification from non-accepted supplies. This solicitation, identified by SPE2DH-26-T-5772, was posted on August 4, 2026, with a response deadline of August 11, 2026. The purchase request number is 7017726970, and delivery is expected within 20 days after order placement. The contract is managed by the Medical Supply Chain FSH under the Department of Defense, with performance required at Camp Lejeune, North Carolina, 28542. All inquiries should be directed to Tina Vu at the provided contact information. The NAICS code for this procurement is 453998, and the full solicitation details are accessible through the DIBBS portal.
All Other Miscellaneous Store Retailers (except Tobacco Stores)

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details