Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

DRAPE, SURGICAL

Active
SPE2DH-26-T-5770Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of 4 packages of surgical drapes, each containing 40 disposable, sterile, antimicrobial adhesive drapes measuring 35 inches by 23 inches and impregnated with IOBAN. The item is identified by NSN 6530-01-181-8247 and must be delivered within 20 days of award. All units must be sealed in individual containers that protect against damage and packed in commercial shipping containers suitable for safe transport at the lowest cost to the delivery point at Fort Hood, Texas. Packaging and marking must comply with Medical Marking Standard No. 1, which replaces all references to MIL-STD-129, and copies of this standard are available through DLA Troop Support. The procurement falls under the NAICS code 423450 and is managed by the Department of Defense’s Medical Supply Chain FSH. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Government identification must be removed from non-accepted supplies, and all data provided must be adequate to support compliance with federal procurement standards. The solicitation number is SPE2DH-26-T-5770, with a response deadline of August 11, 2026, and primary point of contact is Tina Vu.

General Info

Procure 4 packages of 40 sterile antimicrobial surgical drapes, NSN 6530-01-181-8247, delivered to Fort Hood within 20 days.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIIN FSHView Agency

NAICS

423450 - Medical, Dental, and Hospital Equipment and Supplies Merchant WholesalersView NAICS

Place of Performance

BLDG 4925 SANTA FE AVE, FORT HOOD, TX, 76544, US

Set-Aside

NONE

Documents

(1)

SPE2DH-26-T-5770.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIIN FSH
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIIN FSH
View Agency Profile
Office AddressUS
Contacts
Tina Vu
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
DRAPE,SURGICAL
DRAPE, SURGICAL
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
PLASTIC, DISPOSABLE, STERILE<(>,<)> ANTIMICROBIAL ADHESIVE AREA, SELF ADHERING, IOBAN IMPREGNATED, 35 IN BY 23 IN, 40S
U/I = PG (PACKAGE OF 40 DRAPES)
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
ADEQUATE DATA FOR THE NSN/Part Number: 6530-01-181-8247 Quantity: 4 PG Purchase Request: 7017722812QTY: 4 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 423450
New
DIBBS
DRESSING, OCCLUSIVE,
Solicitation # SPE2DS-26-T-305R
The contract specifies the procurement of sterile occlusive petrolatum gauze dressings measuring 3 by 18 inches, with a unit of issue as each. These dressings must have a minimum shelf life of 36 months from the date of manufacture, and no more than five months may have elapsed between the manufacturer’s date and delivery to the government. Labeling must include the date of manufacture, expiration or retest date, contract number, and lot number, in strict accordance with Medical Marking Standard No. 1, which supersedes MIL-STD-129. All packaging must be commercial and designed to protect the product from damage, with each unit sealed in a suitable container and grouped in commercial shipping containers that ensure safe, low-cost delivery to Fort Hood, Texas. The product must comply with all applicable DLA packaging and marking requirements, and bidders must clearly identify the source and part number being supplied. The National Stock Number is 6510-01-532-4289, with a quantity of six units required, and delivery must occur within 20 days of award. The solicitation, issued under SPE2DS-26-T-305R, includes technical and quality requirements referenced in the DLA Master List, and the item is classified as a Type I (Code Q) shelf-life item with a non-extendable 36-month life. The solicitation closed on August 10, 2026, and the contract is administered by the Department of Defense through the Medical Supply Chain MD Surg FSF.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 4 hours ago

DEADLINE

in 6 days
View Details
NAICS: 423450
New
DIBBS
DRAPE, SURGICAL
Solicitation # SPE2DH-26-T-5764
The contract specifies the procurement of surgical drapes, specifically an adhesive U-drape measuring 47 inches by 51 inches with a U-slot opening of 20 by 6.375 inches, designed to be impervious for sterile surgical use. Each unit is packaged in a sealed container to prevent damage or contamination, with 40 units per package, and a total of two packages are ordered. The product must maintain a 36-month shelf life from the date of manufacture, with no more than six months elapsed between manufacturing and delivery to the government. Packaging and marking must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and all units must be shipped in commercial exterior containers suitable for safe transit by common carriers at the lowest rate to the designated delivery point at Fort Hood, Texas. The material must be marked per DLA’s medical marking guidelines, and all packaging requirements align with DLA’s RP001 standards. The NSN is 6530-01-150-3925, with a solicitation number SPE2DH-26-T-5764 issued on August 4, 2026, and responses due by August 11, 2026. Delivery is required within 20 days of award. The contracting authority is the Department of Defense under the Medical Supply Chain FSH, and the primary point of contact is Tina Vu.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 4 hours ago

DEADLINE

in 7 days
View Details
NAICS: 423450
New
DIBBS
TEST PAPER, CHLORINE DE
Solicitation # SPE2DH-26-T-5766
The contract specifies the procurement of chlorine determination test paper, designed for accurate chlorine level measurement with a color chart ranging from 10 to 200 ppm, supplied in two 15-foot rolls of 5/32 inch width, sufficient for 200 tests. Each package contains ten units, with a total order of four packages. The product is governed by the procurement document SPE2DH-26-T-5766 and must comply with the DLA Master List of Technical and Quality Requirements, including packaging standards under RP001, removal of government identification from non-accepted supplies under RQ011, and medical marking requirements per Medical Marking Standard No. 1, which supersedes MIL-STD-129. All units must be sealed in commercial-quality containers and packed in exterior shipping containers suitable for safe, cost-effective transport to the delivery point at Arcadia, ZIP 34266-8836. The item has a non-extendable shelf life of 36 months, with no more than five months allowed to have passed from the date of manufacture to the date of government delivery. Labeling must include the date of manufacture, expiration or retest date, and the contract number or lot number, following the latest revision of MMS1C. The NSN is 6630-01-012-4093, and delivery is required within 20 days of award. The solicitation, issued on August 4, 2026, with a response deadline of August 11, 2026, is managed by the Department of Defense’s Medical Supply Chain FSH, with Tina Vu as the primary point of contact. Covered defense information provisions and applicable DLA packaging requirements must be fully adhered to, ensuring compliance with federal procurement standards.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 4 hours ago

DEADLINE

in 7 days
View Details
NAICS: 423450
New
DIBBS
BATTERY, ANALYZER, RECHA
Solicitation # SPE2DH-26-T-5765
The contract specifies the procurement of two rechargeable batteries for the ISTAT Analyzer, identified by NSN 6630-01-526-4098, with a required delivery within 20 days of award. Each unit must be packaged in a sealed container designed to prevent damage or breakage, and all shipments must use commercial exterior shipping containers that ensure safe, cost-effective delivery to the point of performance at JBPHH, Hawaii, under the lowest available freight rates. All labeling and marking must comply with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and bidders are required to provide the source and part number of the batteries being offered. The acquisition falls under a simplified procurement process governed by the DLA Master List of Technical and Quality Requirements, with packaging standards defined by DLA and applicable to all medical acquisitions. Technical and quality requirements are incorporated by reference, and bidders must ensure compliance with all DLA packaging and marking directives, including the potential application of covered defense information. The solicitation, issued under SPE2DH-26-T-5765, has a response deadline of August 11, 2026, and is administered by the Defense Logistics Agency through the Medical Supply Chain FSH, with Tina Vu as the primary point of contact.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 4 hours ago

DEADLINE

in 7 days
View Details
NAICS: 423450
New
DIBBS
BAG, URINE COLLECTION
Solicitation # SPE2DS-26-T-281R
The contract requires the supply of sterile, individually sealed disposable urine collection bags with a 2000 mL capacity, each equipped with a plastic input and drain tube assembly, an anti-reflux valve in the drip chamber, and a hanger for attachment to beds, chairs, or patients. The unit of issue is a package (PG) of 20, with a total quantity of 3 packages ordered. The item is regulated by the FDA as a Class II medical device under Regulation 876.5250, requiring compliance with registration, labeling, and GMP standards, though a 510(k) premarket notification is not explicitly mandated. The product must have a 60-month shelf life with no more than nine months elapsed between the date of manufacture and delivery, and all containers must be marked with the lot number and manufacture date prefixed by “MFD.” Packaging must adhere to commercial standards as specified in the procurement document, conforming to MIL-STD-2073-1E for preservation, packing, and marking, and must follow Medical Marking Standard No. 1 (MMS No. 1), which supersedes MIL-STD-129 for medical items. Markings must include the required lot and manufacturing date information; hazardous or radioactive materials must still comply with MIL-STD-129 where applicable. Delivery is FOB destination to Fort Bliss, Texas, with a 20-day delivery window from order receipt, and inspection and acceptance occur at the destination. The contract mandates electronic invoicing through WAWF and compliance with NIST SP 800-171 for cybersecurity, as well as Hazard Communication Standard requirements for labeling hazardous materials, including pre-award submission of Safety Data Sheets. Contractors must represent their small business status and provide a Unique Entity Identifier and CAGE code, and must comply with labor and anti-trafficking clauses under FAR and DFARS. Pricing information is not provided in the solicitation, but the item is procured under NSN 6515-01-059-2473, and only approved suppliers such as The Kendall Company LP and Cardinal Health 200, LLC are referenced with their respective part numbers.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

1 day ago

DEADLINE

in 2 days
View Details
NAICS: 423450
New
DIBBS
MASK, RESPIRATOR
Solicitation # SPE2DS-26-T-304G
The contract specifies the procurement of NIOSH-approved particulate respirators, designated as PFR95 type, designed for infection control and protection against tuberculosis transmission. Each respirator features fluidshield protection and filters 1.0 micron particles at 99.6 percent efficiency at a flow rate of 50 liters per minute. The masks are regular size, packaged in boxes of 35 units, and must be stored in their original packaging away from contamination, dust, sunlight, extreme temperatures, excessive moisture, damaging chemicals, and radiation. Storage conditions must be maintained between -4°F (-20°C) and +86°F (+30°C) with humidity not exceeding 80 percent. The item has a non-extendable shelf life of 60 months under the RS001 requirement for TYPE I (CODE S) items. The procurement is governed by technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with packaging, identification, and supply handling following DLA standards including RP001 and RQ011. The NSN 6515-01-450-2057 is listed under a single package quantity, with a delivery requirement of 20 days ADO. Bidders must clearly identify the source and part number being supplied. The solicitation, issued under SPE2DS-26-T-304G, was posted on August 3, 2026, with a response deadline of August 10, 2026, and is managed by the Department of Defense through the Medical Supply Chain MD Surg FSF office located at Tinker AFB, Oklahoma. The point of contact is Vernon Stevenson, reachable via phone and email provided.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 423450
New
DIBBS
DRAPE, SURGICAL
Solicitation # SPE2DH-26-T-5762
The contract specifies the procurement of surgical drapes made from nonwoven disposable material, sized 18 x 26 inches, intended for minor surgical procedures and required to be individually sealed and sterile. Each unit of issue consists of a package of 300 drapes, and the product must maintain a shelf life of 60 months, with no more than nine months having elapsed between the date of manufacture and the date of delivery to the government. Compliance with DLA Packaging Requirements for Procurement is mandatory, and the technical and quality standards referenced under R and I numbers are defined in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on acquisition size. The item is identified by NSN 6530-01-169-7491, with a single purchase request for one package and a delivery requirement within ten days of award. The solicitation, numbered SPE2DH-26-T-5762, was posted on August 3, 2026, with responses due by August 10, 2026, under a federal procurement by the Department of Defense’s Medical Supply Chain FSH, and inquiries should be directed to Tina Vu at the provided contact details.
MEDICAL SUPPLY CHAIIN FSH

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 423450
New
DIBBS
OMEPRAZOLE EXTENDED-RE
Solicitation # SPE2DP-26-T-4288
The contract calls for the procurement of OMEPRAZOLE EXTENDED-RELEASE CAPSULES in 20 MG delayed-release formulation, packaged in 90-count bottles identified by the unit of issue BT, with each bottle containing 90 capsules. The total quantity requested across seven contract line items is 44 BT, equating to 3,960 bottles, with a unit price of $50.80 per BT, resulting in a total contract value of $2,235.20. All deliveries are FOB destination, with inspection and acceptance occurring at the point of delivery, and no quantity variance is permitted. The required delivery timeframe is 20 days from the order date, with all shipments due by July 29, 2026, except for one line item due on July 28, 2026. The product must be stored at controlled room temperature and must have a minimum of 21 months of remaining shelf life upon delivery, given its 24-month shelf life with no extensions allowed. The manufacturer is SANDOZ INC., with NDC 00781-2868-92, and the item is regulated by the FDA, requiring referral for confirmation prior to award. Packaging and marking must strictly conform to the DLA Master List of Technical and Quality Requirements, which supersede all other standards, including ASTM D3951 and MIL-STD-129. Packaging must ensure protection from damage and breakage, with commercial exterior shipping containers used to facilitate safe and economical transport by common carrier. Palletization must comply with RP001 DLA Packaging Requirements, and each unit pack must have a QUP of 001. All containers must be marked in accordance with Medical Marking Standard No. 1, which has replaced MIL-STD-129, though MIL-STD-129 remains applicable for certain labeling elements as referenced in the contract. Hazardous materials, if identified under FED-STD-313, must be packaged per TQ Requirement IP025; otherwise, commercial packaging per ASTM D3951 applies. Shipment must be sent by the fastest traceable means, and parcel post is explicitly prohibited. Delivery addresses span multiple U.S. military installations, including Fort Bragg, Fort Stewart, Watervliet Arsenal, and other locations, each with unique DoDAACs and point of contact identifiers
MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

1 day ago

DEADLINE

in 2 days
View Details
NAICS: 423450
New
DIBBS
DRAPE, SURGICAL
Solicitation # SPE2DH-26-T-5739
The contract specifies the procurement of a small surgical drape made of transparent, disposable, sterile plastic measuring 1¼ by 17⅜ inches with an adhesive area protected by a liner, intended for general surgical use. Each unit must be individually sealed in a suitable container that safeguards against damage or breakage, and all units must be packed in commercial shipping containers that ensure safe delivery at the lowest carrier rate to the designated point of delivery, which is Offutt AFB, zip 68113-1044. Packaging must comply with Medical Marking Standard No. 1, replacing all references to MIL-STD-129, and all items must be marked accordingly. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition type. The item is identified by NSN 6530-01-047-9697 with a quantity of one pack, and delivery is required within five days of award. The solicitation number is SPE2DH-26-T-5739, issued by the Department of Defense’s Medical Supply Chain FSH, with bids due by August 10, 2026, and point of contact established as Tina Vu.
MEDICAL SUPPLY CHAIIN FSH

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 423450
New
DIBBS
TEST TUBE, BLOOD COLLEC
Solicitation # SPE2DH-26-T-5759
The contract specifies the procurement of 100 glass vacuum blood collecting test tubes, each with a 15 mL capacity measuring 16 by 125 mm and fitted with a rubber cap, all without anticoagulant and delivered in nonsterile condition. Each package contains 100 units, and the product must have a minimum shelf life of 24 months from the date of manufacture, with no more than three months elapsed between manufacture and delivery to the government. Labeling requirements include the NSN 6640-00-145-1143, manufacturer and CAGE code, date of manufacture, expiration or retest date, and the contract number or lot number. Bidders must clearly identify the source and part number being supplied. All packaging must comply with commercial standards as outlined in the procurement document, ensuring each unit is sealed in a container that protects against damage or breakage, and all units must be packed in commercial exterior shipping containers suitable for safe delivery via common carrier at the lowest possible rate to the designated delivery point in San Antonio, Texas. Material must be marked in accordance with Medical Marking Standard No. 1, superseding MIL-STD-129, and copies of this standard are available through DLA Troop Support. The solicitation is open under contract number SPE2DH-26-T-5759, with bids due by August 10, 2026, and delivery required within 20 days after award.
MEDICAL SUPPLY CHAIIN FSH

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 423450
New
DIBBS
RESUSCITATION KIT, MOUT
Solicitation # SPE2DS-26-T-303V
The resuscitation kit is a pediatric-specific, latex-free Broselow Hinkle system designed for emergency use and contains a comprehensive set of components including 26 procedural modules organized across seven pouches, a Broselow tape, two manual resuscitators, four cuff masks, three disposable blood pressure cuffs, one gauge, two Magill forceps, and two laryngoscope handles. The kit is configured as a mouth-to-mask or oronasal resuscitator system, ensuring readiness for airway management in pediatric emergency scenarios. Each unit must have a 24-month shelf life, and no more than three months may have passed between the date of manufacture and delivery to the government to ensure product integrity and usability upon receipt. The kit is identified by NSN 6515-01-513-9276 and is procured under solicitation SPE2DS-26-T-303V, with a requirement for delivery within 20 days of award. Labels must include the NSN, manufacturer and CAGE code, dates of manufacture and expiration or retest, and the contract or lot number, adhering to all technical and quality requirements referenced in the DLA Master List. Packaging, handling, and labeling must comply with DLA standards including RA001, RP001, and RQ011 provisions, ensuring compatibility with federal supply systems and proper identification removal from non-accepted items. The procurement is for a single unit with a purchase request number 7017720931, and performance is specified to occur at Fort Bragg, North Carolina.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 423450
New
DIBBS
BAG, STERILIZATION-BIOH
Solicitation # SPE2DH-26-T-5734
The contract is for the procurement of heavy-duty, puncture-resistant sterilization biohazard disposal bags in red or orange coloration to indicate contamination, designed specifically for autoclaving biologically contaminated materials such as culture dishes prior to disposal. The unit of issue is a package of 200 units, and the product must meet strict technical and quality requirements as defined in the DLA Master List of Technical and Quality Requirements. Packaging must adhere to commercial standards, with each unit sealed in a container that protects against damage and be packed in suitable exterior shipping containers to ensure safe, cost-effective delivery by common carriers to the contract-specified destination. All packaging and marking must comply with Medical Marking Standard No. 1, replacing any reference to MIL-STD-129, and must not include government identification on non-accepted supplies. The product is sourced from approved suppliers including MeDeGen Medical Products, LLC and Baxter Healthcare Corp., with the NSN 6530-01-078-0365 and part numbers specified. Delivery is required FOB destination in 105 days with zero variance allowed in quantity, and inspection and acceptance occur at the delivery point. The contract, issued under solicitation SPE2DH-26-T-5734, follows DLA’s standard procedures, and the unit of issue is consistent with DoD and ANSI X12 guidelines.
MEDICAL SUPPLY CHAIIN FSH

POSTED

1 day ago

DEADLINE

in 6 days
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIIN FSH

Same awarding agency

NAICS: 333248
New
DIBBS
SCOOP, LABORATORY
Solicitation # SPE2DH-26-T-5776
The contract specifies the procurement of sterile, disposable, individually sealed laboratory scoops manufactured from polystyrene plastic, intended for retrieving samples from larger sources. The product is white in color and supplied in boxes of ten units each, with a total order quantity of three boxes. The items are classified under NSN 6640-01-722-5866 and must comply with technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the type of acquisition. Packaging must adhere to DLA packaging standards, and any non-accepted supplies must have government identification removed prior to return. Delivery is required within twenty days after issuance, and performance will occur at APO 96278-2060. The solicitation, issued under SPE2DH-26-T-5776, was posted on August 4, 2026, with responses due by August 11, 2026. The contracting authority is the Department of Defense through the Medical Supply Chain FSH, with Tina Vu listed as the primary point of contact.
All Other Industrial Machinery Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339113
New
DIBBS
PANEL, MODULAR, HANGING
Solicitation # SPE2DH-26-T-5768
The contract is for a single unit of a modular hanging trauma panel designated by NSN 6530-01-515-7651, intended for rapid deployment in combat trauma care during CASEVAC operations. Constructed of black Cordura nylon, the panel is MOLLE compatible and designed to integrate seamlessly with military aircraft, ground vehicles, and fixed or temporary facilities. It features a comprehensive internal layout including four full-width storage pockets, one half-panel bellos pocket, and a total of ten modular pockets—six small, two medium, one long, and one flat—each labeled with removable low-light visibility markings to ensure quick identification under low-visibility conditions. The panel itself is marked internally and externally with low-light readable "TRAUMA" identifiers and supports immediate access to essential medical supplies, enabling effective "tail gate" medical response anywhere on the battlefield. The procurement falls under DLA packaging requirements and incorporates technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue date or award date depending on acquisition size. The solicitation number is SPE2DH-26-T-5768, issued on August 4, 2026, with bids due by August 11, 2026. Delivery is required within 20 days of award to Fort Bliss, Texas, 79918-2527. The contract is managed by the Department of Defense’s Medical Supply Chain FSH, with Tina Vu listed as the primary point of contact. Bidders must clearly identify the source and part number of the supplied item, and the purchase request number is 7017716143, with the unit of issue being each.
Surgical Appliance and Supplies Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 7 days
View Details
NAICS: 453998
New
DIBBS
STUDY CARD
Solicitation # SPE2DH-26-T-5772
The study card is a paper-based item measuring 5 inches by 4 inches, intended for use with the Explosive Ordnance Disposal Tool Kit identified by NSN 1385-01-565-1626. It is supplied as a single unit and is specifically tied to the part number 6910-01-612-6510 with a required quantity of one. The item is subject to technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which must be accessed online, and compliance is governed by the revision of the master document in effect at the time of solicitation or award depending on the acquisition size. The contract includes a requirement for the removal of government identification from non-accepted supplies. This solicitation, identified by SPE2DH-26-T-5772, was posted on August 4, 2026, with a response deadline of August 11, 2026. The purchase request number is 7017726970, and delivery is expected within 20 days after order placement. The contract is managed by the Medical Supply Chain FSH under the Department of Defense, with performance required at Camp Lejeune, North Carolina, 28542. All inquiries should be directed to Tina Vu at the provided contact information. The NAICS code for this procurement is 453998, and the full solicitation details are accessible through the DIBBS portal.
All Other Miscellaneous Store Retailers (except Tobacco Stores)

POSTED

about 4 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334513
New
DIBBS
COMPARATOR, COLOR
Solicitation # SPE2DH-26-T-5767
The comparator is a color-matching device designed for use with COLILERT QUANTI-TRAY systems to distinguish between borderline positive and negative results through visual comparison of yellow fluorescence thresholds. It is a 51-well tray filled with a proprietary borderline yellow and fluorescing medium to ensure accurate interpretation of test outcomes. The item is identified by NSN 6630-01-506-2252 and is being procured under solicitation SPE2DH-26-T-5767 for a single unit, with delivery required within 20 days of award. The product is subject to strict shelf-life requirements, mandating a non-extendable 12-month lifespan from the date of manufacture, with no more than one month elapsed between manufacturing and government delivery. Labeling must adhere to the latest version of Medical Marking Standard No. 1, including clear indications of manufacture date, expiration date, and contract or lot number, replacing all prior references to MIL-STD-129. Packaging must comply with commercial standards, protect contents from damage, and ensure safe, cost-effective transport to Dover AFB, with all markings and packaging conforming to DLA’s specified medical packaging requirements. The contract incorporates technical and quality requirements from the DLA Master List, includes provisions for handling covered defense information, and follows DLA packaging and removal guidelines for non-accepted supplies.
Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 4 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
MOUTH BARRIER, MANIKIN,
Solicitation # SPE2DH-26-T-5774
The contract solicits a single package of fifty disposable adult-sized mouth barrier and lung bag combinations designed exclusively for CPR training purposes, compatible with the Prestan adult CPR training manikin. The item is identified by NSN 6910-01-708-2080 and must comply with DLA packaging and technical quality requirements as outlined in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. The unit of issue is a package containing fifty units, with a total order quantity of five packages requested to be delivered within five days of award. The procurement is governed under the federal solicitation SPE2DH-26-T-5774, issued by the Department of Defense’s Medical Supply Chain FSH, with a response deadline of August 11, 2026, and a posted date of August 4, 2026. Delivery must be made to an FPO address with ZIP 96693, and all supplies must meet the requirement for removal of government identification if not accepted. Primary point of contact is Tina Vu, reachable via email and phone provided.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333248
New
DIBBS
LITMUS PAPER
Solicitation # SPE2DH-26-T-5777
LITMUS PAPER, ACS, 30’S, identified by NSN 6640-01-485-6075, is procured under solicitation SPE2DH-26-T-5777 with a requirement for one package containing thirty individual units, each individually sealed in foil packets with a printed color chart for pH indication. All packaging must comply with commercial standards as specified in the procurement document, ensuring each unit is protected from damage and that exterior shipping containers are suitable for safe transport at the lowest cost to the designated delivery point in APO, 96278-2060. The product must adhere to Medical Marking Standard No. 1, replacing all references to MIL-STD-129, and each label must include the NSN, manufacturer and CAGE code, date of manufacture, expiration or retest date, and contract or lot number. The shelf life is strictly limited to eighteen months, with no more than three months having passed from the date of manufacture to the date of government delivery. Bidders must clearly state the source and part number being offered. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Additionally, the contract incorporates provisions for the removal of government identification from non-accepted supplies and confirms that covered defense information may apply. The solicitation closes on August 11, 2026, and delivery is required within twenty days of award.
All Other Industrial Machinery Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335910
New
DIBBS
BATTERY, DEFIBRILLATOR
Solicitation # SPE2DH-26-T-5775
A 12VDC lithium battery with approximately 9.2 grams of lithium content is specified for use with Cardiac Science PowerHEART G5 AEDs, sold in units of each. The battery must be stored between 20°C and 30°C to maintain integrity and performance. Technical and quality requirements referenced by R and I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on the acquisition scale. Packaging must comply with DLA procurement standards, and non-accepted supplies must have government identification removed. Covered defense information provisions may apply. The item is identified by NSN 6135-01-652-9622 with a quantity of four units required under purchase request 7017720173, and delivery is due within 20 days after award. The solicitation number is SPE2DH-26-T-5775, posted on August 4, 2026, with responses due by August 11, 2026. The contract is managed by the Department of Defense’s Medical Supply Chain FSH through the DLA, with performance located in San Diego, California, and primary point of contact being Tina Vu at tina.vu@dla.mil.
Battery Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 7 days
View Details
NAICS: 325620
New
DIBBS
FLOSS, WAXED, DENTAL
Solicitation # SPE2DH-26-T-5773
The contract specifies the procurement of dental floss, waxed, nylon, 200 yards per roll, for military use under NSN 6520-01-500-1520, with a unit of issue as each and a requested quantity of 25 units. The product must comply with technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, identified by R or I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition scale. Packaging must adhere to DLA packaging standards, and any non-accepted supplies must have government identification removed prior to return. The solicitation, issued under SPE2DH-26-T-5773, requires bidders to clearly state the source and part number being offered and targets delivery within 84 days ADO to an APO address with ZIP 09227-0000. The purchasing agency is the Department of Defense through the Medical Supply Chain FSH, with Tina Vu as the primary point of contact, and the solicitation closes on August 11, 2026, under NAICS code 325620 for manufacturing of dental appliances and equipment.
Toilet Preparation Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 7 days
View Details
NAICS: 314910
New
DIBBS
PANEL, MODULAR, MEDIC
Solicitation # SPE2DH-26-T-5769
The contract calls for two modular medical panels designed for primary care operations in field environments, each constructed from black Cordura nylon with MOLLE compatibility to allow seamless integration with existing military equipment systems. These panels provide organized, immediate-access storage for medical supplies and equipment used to manage sick call patients in operational settings, ensuring efficient triage and treatment capabilities in both fixed and temporary facilities. The item is identified by NSN 6530-01-518-0118, with a requirement for delivery within 20 days of award, and must fully comply with technical and quality specifications referenced in the DLA Master List of Technical and Quality Requirements, including packaging and government identification removal standards. Bidders must clearly specify the source and part number being submitted, as this solicitation is issued under contract number SPE2DH-26-T-5769 by the Department of Defense’s Medical Supply Chain FSH, with performance located at Fort Bliss, Texas. The solicitation was posted on August 4, 2026, and responses are due by August 11, 2026, under NAICS code 314910 for other textile product mills. Tina Vu of DLA serves as the primary point of contact for inquiries, and all submissions must adhere to DLA procurement and packaging directives applicable to the solicitation issue date, with no set-aside provisions specified.
Textile Bag and Canvas Mills

POSTED

about 4 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339113
New
DIBBS
PAD, HEAT TREATMENT
Solicitation # SPE2DH-26-T-5778
The product is a single-use, disposable heat therapy pad designed for instant and consistent pain relief through simple activation by squeezing and kneading. Made with food-grade sodium acetate and non-toxic materials free of DEHP and natural rubber latex, it is safe for direct skin application and meets strict safety standards. Measuring 6 by 9 inches, each case contains 16 pads and requires storage at room temperature. The item is identified by NSN 6530-01-724-0439 with a procurement quantity of four cases under Purchase Request 7017729834, with delivery expected within 20 days of award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with packaging and supply handling subject to DLA regulations including removal of government identification from non-accepted supplies. The solicitation, issued under SPE2DH-26-T-5778 on August 4, 2026, with a response deadline of August 11, 2026, is managed by the Department of Defense's Medical Supply Chain FSH, with performance at Hurlburt Field, Florida, and primary point of contact Tina Vu at DLA.
Surgical Appliance and Supplies Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 7 days
View Details