Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

ANODE,CORROSION PRE

Active

70Z08526Q30099B00Federal

Response Deadline08/18/2026, 04:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for an anode used in corrosion prevention and is solicited under number 70Z08526Q30099B00 by the Department of Homeland Security through the Sflc Procurement Branch 2. The solicitation was posted on August 4, 2026, with a response deadline of August 18, 2026, at 4:00 PM Eastern Time. There is no set-aside designation applied to this procurement, meaning it is open to all eligible contractors without restriction based on business size or category. The North American Industry Classification System code is 331491, indicating the product falls under other fabricated metal product manufacturing. The office responsible is located in Alameda, California, with a ZIP code of 94501, and the point of contact for primary inquiries is Stephanie Garity, reachable at 410-762-6496 or stephanie.a.garity@uscg.mil, with Chad Ball as the secondary contact at 571-607-2534 or chad.a.ball@uscg.mil. The place of performance has not been specified in the provided data, and interested parties must access the full solicitation details through the SAM.gov portal link provided.

General Info

Anode for corrosion prevention solicited by DHS, deadline August 18, 2026, open to all contractors.

Agency

Department Of Homeland Security → Sflc Procurement Branch 2(00085)View Agency

NAICS

331491 - Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and ExtrudingView NAICS

Place of Performance

CA

Set-Aside

NONE

Documents

(2)

2.3.1-+RFQ+70Z08526P30099B00.docx

DOCX

2.3.1-+FAR+Clauses.docx

DOCX

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation

PostedAug 4

Solicitation

Response DeadlineAug 18

Submission deadline

Response Deadline

08/18/2026, 04:00:00 PM UTCin 14 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Homeland Security → Sflc Procurement Branch 2(00085)

Contacts2 people available

OfficeALAMEDA, CA, 94501, USA

Organization / Agency

Department Of Homeland Security → Sflc Procurement Branch 2(00085)

View Agency Profile

Office AddressALAMEDA, CA, 94501, USA

Contacts

Stephanie Garity

contact@example.gov

+1 (555) 000-0000

Chad Ball

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

See attached.

Similar Contracts

Same NAICS industry code

GOVERNMENT FIRST ARTIC

Solicitation # SPE4A7-26-T-614K

The contract pertains to the procurement of a single unit of DUCT ASSEMBLY,AIR C with NSN/Part Number 0001S00000052, under solicitation SPE4A7-26-T-614K, with a delivery requirement of 260 days after award. The item is subject to strict export control regulations under either ITAR or EAR, meaning any technical data associated with it cannot be disclosed or transferred to foreign persons, including foreign nationals within the United States, without prior authorization from the Department of State or Department of Commerce. DFARS 252.225-7048 governs the handling of this controlled data, and only DLA contractors with approved US/Canada Joint Certification Program certification, completed training on proper handling of DOD export-controlled technical data, and approved access via the DLA questionnaire are permitted to receive or work with this information. The procurement is managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with performance scheduled for Key West, Florida, 33040-9059, and the primary point of contact is Georgina Vass at georgina.vass@dla.mil. The solicitation was posted on August 4, 2026, with responses due by August 12, 2026, under a federal contracting mechanism with NAICS code 331491.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 4 hours ago

DEADLINE

Solicitation # SPE8E4-26-T-1925

The contract requires the procurement of aluminum alloy armor plate meeting precise specifications: 1.250 inches thick, 48.00 inches wide, 144.00 inches long, weighing approximately 829.44 pounds per piece, and produced from Alloy 5083. The material must undergo ballistic testing in accordance with MIL-DTL-46027N and conform to all technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, including the Qualified Suppliers List for Distributors (QSLD) mandate, which restricts award eligibility solely to suppliers listed on the QSLD. Non-compliance with this requirement constitutes an exception and may result in disqualification or criminal penalties if unauthorized substitution occurs. A Certificate of Quality Compliance (Mill-Material Certification) must accompany every shipment and be forwarded to the DLA Troop Support Contracting Officer. Continuous identification markings are required on each unit, including the DLA contract number, NSN, specification revision, alloy and temper, manufacturer details, heat and lot numbers, and dimensions, applied via stamping or stenciling — not die stamping — and must be legible, durable, and waterproof. For items under 0.250 inches nominal OD, adhesive labels are required; for wire, tags are acceptable. Dual-unit shipments must display both quantities on markings. Packaging must adhere to MIL-STD-2073-1E, with preservation per ASTM B660, and marking per MIL-STD-129R, including UCC-128/GS1-128 barcoding where applicable. Palletization follows DLA’s RP001 packaging requirements. Delivery is FOB origin to the DDSP New Cumberland Facility in Pennsylvania, with an original required delivery date of January 15, 2027, and a need ship date of January 18, 2027, within 167 days after award. The contract mandates compliance with cybersecurity requirements including CMMC Level 2 self-assessment, safeguarding covered defense information under DFARS 252.204-7012, and NIST SP 800-171 implementation. The prohibition on acquiring covered defense telecommunications equipment applies, and sea transport must occur via U.S.-flag vessels unless waived. Invoicing is exclusively through Wide Area WorkFlow (WAWF), and suppliers must be registered in SAM

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Solicitation # SPE8E9-26-T-3205

The contract is for the procurement of 476 sheets of aluminum alloy, specifically grade 5052 temper H32, with precise dimensions of 0.063 inches thick, 48 inches wide, and 96 inches long, weighing approximately 28.16 pounds per sheet. All material must conform exactly to the specified dimensions without the use of test coupons, and must be supplied in whole-foot lengths only. The product must satisfy technical requirements referenced in the DLA Master List of Technical and Quality Requirements and must be certified under the Qualified Suppliers List for Distributors (QSLD), meaning only suppliers listed in the QSLD as of June 1994 are eligible to bid or deliver. Any deviation from the QSLD requirement must be explicitly declared by the offeror, and failure to comply may result in criminal penalties for unauthorized substitution. Each unit must be continuously marked with the DLA contract delivery order number, NSN, specification number and revision, alloy, grade, class, type, part number, die number, temper, manufacturer’s name, heat and lot number, and dimensions using either stamping (excluding die stamp) or stenciling; markings must be legible, waterproof, stable under normal handling, and applied with non-contaminating fluid. Packaging must follow MIL-STD-2073-1E and Level A requirements of ASTM B660, with preservation method ZZ, and palletization must adhere to DLA packaging standards. Marking for shipment must comply strictly with MIL-STD-129, including the use of special marking code ZZ and inclusion of both units of measure when applicable. A Certificate of Quality Compliance (Mill-Material Certification) is mandatory for every shipment and must be provided to the customer or DLA depot and forwarded to the Contracting Officer. Inspection and acceptance occur at the destination point, governed by FAR 52.246-2, with no supplier inspection waived except under the QSL program. Delivery is required within 17 days after receipt of order, FOB origin, to the designated DLA distribution facility in New Cumberland, Pennsylvania, with a need ship date of August 21, 2026, and an original required delivery date of December 7, 2026. Invoicing must be submitted electronically via WAWF, and all compliance with DFARS clauses regarding cybersecurity, hazardous materials, trafficking in persons, employment verification, and export control are mandatory

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Solicitation # SPE8E9-26-T-3212

The contract is for the procurement of aluminum alloy metal plate, specifically 0.375 inches thick, 36 inches wide, and 96 inches long, with a reference weight of 126.96 pounds per piece, compliant with SAE AMS4027P Revision P and ASTM B666/B666M-20, identified by NSN 9535-00-495-7813 and alloy grade 6061-T651. Delivery is required within 55 days of order placement, with an original required delivery date of November 15, 2026, and a need ship date of July 13, 2026, to be delivered FOB origin to the DLA Distribution San Joaquin facility in Tracy, California. A minimum quantity of 33 pieces is specified with zero variance allowed, and all plates must be supplied in whole-foot increments with no test coupons permitted. Each unit must be continuously marked with the DLA contract delivery order number, NSN, specification revision, alloy grade, part and die numbers, temper, manufacturer’s name, heat and lot number, and dimensions using only stamping or stenciling methods that are legible, waterproof, stable under normal handling, and non-contaminating. Adhesive labels are required for bars, tubes, and shapes under 0.250 inches nominal OD, while tags are acceptable for wires. Packaging must conform to MIL-STD-2073-1E and Level A requirements of ASTM B660-23, including robust four-corner and side-edge protection with full coverage top and bottom fiberboard or better, and palletization per RP001. Marking must also comply with MIL-STD-129, and preservation uses code ZZ per ASTM B660. A Certificate of Quality Compliance (Mill-Material Certification) is mandatory with every shipment, and a copy must be forwarded to the DLA Troop Support Contracting Officer. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible, and any deviation from this requirement must be explicitly declared, with non-compliance treated as an unauthorized substitution that may incur criminal penalties. The offeror must be a small business as defined under NAICS 331491 with valid socioeconomic certifications, and the contract incorporates numerous DFARS and FAR clauses regarding cybersecurity, hazardous materials

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Solicitation # SPE8E4-26-T-1918

The contract seeks the procurement of aluminum alloy high magnesium plate with precise specifications: 0.375 inches thick, 60.00 inches wide, and 240.00 inches long, weighing approximately 518.40 pounds per piece. This item is governed by technical and quality requirements outlined in the DLA Master List, with mandatory compliance to ASTM B928/B928M-15 (R2023), MIL-STD-129R, ASTM B666/B666M-20, and ASTM B660-23. The material must be fully traceable through continuous marking on every unit, including the DLA contract number, NSN, specification revision, alloy identity, grade, temper, manufacturer’s name, heat and lot number, and exact dimensions. Markings must be applied via stamping or stenciling and be legible, waterproof, and non-contaminating, with adhesive labels mandated for small items under 0.250 inches nominal OD. Packaging must adhere to MIL-STD-2073-1E with preservation code ZZ compliant with ASTM B660 Level A and Disc Drawing No. 01735, and palletization must follow DLA Packaging Requirements RP001. All shipments require a Certificate of Quality Compliance with each delivery, and a copy must be forwarded to the DLA Troop Support Contracting Officer. Delivery is FOB origin to the DDSP New Cumberland Facility in Pennsylvania, with a delivery window of 167 days after order award, and the quantity of 11 pieces must be delivered exactly as ordered with zero variance allowed. The solicitation is a total small business set-aside under NAICS 331491, and only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible for award; any deviation from this requirement must be explicitly declared. Suppliers must also comply with cybersecurity safeguards, trafficking in persons prohibitions, employment eligibility verification, and sustainable product requirements. Contractual clauses enforce inspection at destination, acceptance at destination, and strict penalties for non-compliance, including potential criminal liability for unauthorized substitutions. Payment processing must occur through Wide Area WorkFlow using approved document types, and all data submissions must align with electronic procurement protocols governed by DIBBS. The contract includes no pricing details but mandates that all submitted offers strictly conform to the technical, quality, and eligibility criteria to be

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Solicitation # SPE8E4-26-T-1939

The contract specifies the procurement of one metal plate identified by NSN 9535-01-477-4004 and part number 230-10269, with a unit of issue as a single piece. Delivery is required within five days of award, with goods to be shipped FOB origin and no variance allowed in quantity. Inspection and acceptance both occur at the destination. Packaging must comply with MIL-STD-2073-1E, specifically using packaging method 10, drying method 1, and preservative material 00. Marking follows MIL-STD-129 with no special marking code, and palletization adheres to DLA packaging requirements. The shipment is to be delivered via traceable means excluding parcel post to a military address at Fort Bliss, Texas, with detailed routing instructions including RDD and TCN identifiers. The contract references technical and quality standards from the DLA Master List and includes provisions for the removal of government identification from non-accepted supplies and the handling of covered defense information. The solicitation number is SPE8E4-26-T-1939, issued by the Defense Logistics Agency under NAICS code 331491, with a response deadline of August 14, 2026, and an original required delivery date of July 31, 2026.

Defense Logistics Agency

POSTED

DEADLINE

Solicitation # SPE8E4-26-T-1911

The contract specifies the procurement of 19 sheets of perforated aluminum alloy, each measuring 0.051 inches thick, 36 inches wide, and 96 inches long, with a perforation diameter of 0.188 inches and staggered center-to-center spacing of 0.438 inches along the vertical axis. The material must conform to SAE AMS-QQ-A-250/8C and ASTM B666/B666M-20 standards, with a specified alloy of 5052 and temper H32, and is subject to strict dimensional compliance—no test coupons are permitted, and lengths must be delivered in whole feet. A Certificate of Quality Compliance, including mill-material certification, is mandatory for every shipment and must accompany delivery to the DLA depot and be forwarded to the contracting officer. Continuous identification markings are required on each sheet, including the DLA contract delivery order number, NSN, specification revision, alloy and temper, manufacturer’s name, heat and lot number, and dimensions, applied via stamping or stenciling with legible, waterproof, and durable characters; adhesive labels are required for items under 0.250 inches in nominal OD. Preservation and packaging must comply with MIL-STD-2073-1E and Level A requirements of ASTM B660-23 under the ZZ code, with palletization following DLA Packaging Requirements (RP001) and labeling per MIL-STD-129R(3), including special marking code ZZ for additional requirements. The contract is governed by numerous federal acquisition regulations and DLA-specific directives, including the Qualified Suppliers List for Distributors (QSLD), which restricts award eligibility solely to suppliers listed on the official QSLD, with deviations requiring explicit disclosure; non-compliance may result in criminal penalties. The QSL program waives certain quality conformance inspections such as COQC, PVT, QAP-EQ003, and ASQ H1331 for compliant suppliers. Defense Information Protection standards under 252.204-7012 and safeguarding of covered defense information are mandatory, with cybersecurity compliance anchored in NIST SP 800-171 and DFARS requirements. Delivery is FOB origin, with a 167-day timeline after award and an absolute need ship date of January 18, 2027, to be delivered to

POSTED

DEADLINE

WIRE, ELECTRICAL

Solicitation # SPE7M1-26-T-246G

The contract specifies the procurement of 3,500 feet of electrical wire under NSN 6145-00-578-6594, with delivery required within 158 days from the contract date, FOB origin, and a permissible quantity variance of plus or minus 5 percent. The wire must comply with technical standards SAE AS50861/2A and SAE AS50861 Revision B, and all components must originate from sources listed on the Qualified Products List or Qualified Manufacturers List, as this NSN is designated as a primary QPL/QML item. Packaging and preservation must adhere to MIL-STD-2073-1E and MIL-DTL-12000, with marking conforming to MIL-STD-129 and palletization following DLA packaging requirements. The wire must be furnished in continuous length if the advice code is 2N, 28, or 34; if the code is 2P or 39, multiple unit packs are acceptable, with the advice code taking precedence over any conflicting schedule information. Mercury and mercury-containing compounds are strictly prohibited unless expressly exempted for approved applications such as batteries, fluorescent lights, instrument sensors, weapon systems, or specified chemical reagents, and any portable devices containing mercury must include a secondary containment barrier per NAVSEA 5100-003D. Delivery is to be made to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at the destination. The solicitation number is SPE7M1-26-T-246G, with a response deadline of August 13, 2026, and the contracting office is part of the Department of Defense’s Maritime Supply Chain under full and open competition with no set-aside.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

CABLE, RADIO FREQUEN

Solicitation # SPE7M1-26-T-235X

The contract covers the procurement of 7,000 feet of radio frequency cable, identified by NSN 6145013353058, with a permissible quantity variance of plus or minus 5 percent, allowing delivery between 6,650 and 7,350 feet. The item is designated as a commercial item and must meet all technical and quality requirements specified in the DLA Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951. The cable must be delivered in continuous lengths, with packaging and palletization strictly compliant with RP001: DLA Packaging Requirements for Procurement and MIL-STD-129 for marking and labeling. The delivery point is FOB Origin to Robins Air Force Base in Georgia, with inspection and acceptance occurring at the destination after a 161-day delivery schedule from the award date. The product is classified as a critical application item and is intended for use by The Boeing Company, Amphenol, and Nexans Aerospace USA LLC under specific part numbers. Packaging must adhere to ASTM D3951 only where DLA requirements do not apply, and all shipments must be labeled with correct Unit of Issue and Quantity per Unit Pack as defined in the contract. Hazardous materials must comply with 29 CFR 1910.1200 unless governed by specific federal statutes, and any item containing radioactive material above 0.002 microcuries per gram or 0.01 microcuries per item requires advance notification to the Contracting Officer and proper MIL-STD-129 labeling. Invoicing must be submitted exclusively through Wide Area WorkFlow, and the contractor must maintain current Unique Entity ID and CAGE code information in SAM. Compliance with FAR and DFARS clauses is mandatory, including those related to small business representation, safeguarding contractor information systems, payment levies, and subcontractor flow-downs. The solicitation allows for socioeconomic set-asides and requires offerors to certify their size and status, particularly if pursuing HUBZone, 8(a), or SDVOSB preferences. Contract modifications are governed by fixed-price clauses and pricing deviations must be negotiated under specified terms. The estimated contract value ranges between $4,402 and $7,277 based on historical unit pricing, though the final price will be determined by offeror submissions. All proposals must be submitted electronically via DIBBS by August

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Structural Steel Supplier / Metal FabricatorThe contract seeks a supplier to provide one linear foot of structural steel beam compliant with military specifications ASTM A700 and MIL-STD-2073-1E, requiring full traceability, proper preservation, secure packaging, and accurate labeling to meet defense logistics standards. The material must be suitable for use in defense applications and adhere to rigorous quality and documentation protocols to ensure conformity and accountability throughout its lifecycle. The solicitation is issued under a subcontract type by the Defense Logistics Agency within the Department of Defense, with performance specified at Fort Knox, Kentucky, 40121-5000. Interested parties must respond by August 6, 2026, and the procurement falls under NAICS code 331491, which designates other metal product manufacturing. The supplier must be prepared to fulfill strict defense-specific requirements for material handling and documentation, ensuring the beam is traceable and preserved in accordance with federal military standards.

Defense Logistics Agency

POSTED

DEADLINE

BEAM, STRUCTURAL

Solicitation # SPE8E4-26-T-1926

The contract pertains to the procurement of a structural beam with NSN 9540-01-446-2523, requiring one foot in quantity, to be delivered within five days of award. The solicitation, issued under SPE8E4-26-T-1926, was posted on July 26, 2026, with responses due by August 6, 2026. It falls under NAICS code 331491 and is managed by the Defense Logistics Agency on behalf of the Department of Defense, with performance location specified as Fort Knox, Kentucky, ZIP 40121-5000. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible via the provided web address, with revision control determined by the acquisition size and applicable solicitation dates. For simplified acquisitions, the revision in effect on either the solicitation issue date or award date applies; for large acquisitions, the RFP issue date controls unless an amendment incorporates a later revision, in which case the amendment date governs. The contract also mandates removal of government identification from any non-accepted supplies. Primary point of contact is Pamela Duffey, reachable via email and phone for inquiries, and the full solicitation can be accessed through the DIBBS platform.

Defense Logistics Agency

POSTED

DEADLINE

High-Performance Alloy Material SupplyThe contract pertains to the supply of certified high-nickel alloy materials, including Inconel 718 and titanium billets, specifically for use in the manufacturing of aerospace components. These materials must meet stringent aerospace-grade specifications to ensure performance, durability, and reliability under extreme operational conditions. The work is being procured as a subcontract under the Defense Logistics Agency, part of the Department of Defense, and falls under NAICS code 331491, which categorizes other base metal manufacturing. The contract was posted on July 21, 2026, and the materials are intended for delivery to support defense-related aerospace applications, though the precise location of performance is not specified. Compliance with certification standards and material traceability is imperative to meet military and industry quality requirements.

Defense Logistics Agency

POSTED

DEADLINE

More opportunities from Department Of Homeland Security → Sflc Procurement Branch 2(00085)

Same awarding agency

Specialized Freight and Delivery Logistics (FOB Destination)The contract involves the specialized transportation and delivery of marine propellers to the U.S. Coast Guard's Shipyard Logistics Center in Curtis Bay, Maryland, under FOB Destination terms, meaning the risk of loss remains with the contractor until the goods are delivered during standard weekday business hours. The delivery location is designated as 21226, and the contractor must ensure timely and secure transit to meet the required delivery window. This is a small business set aside subcontract governed by the NAICS code 484220, which corresponds to specialized freight trucking, indicating the need for experienced logistics providers with expertise in handling sensitive or oversized marine components. The solicitation was posted on August 3, 2026, with responses due by August 13, 2026, and the contracting activity is managed by the SFLC Procurement Branch 2 under the Department of Homeland Security.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Military-Compliant Packaging and Labeling ServicesThe contract requires comprehensive packaging, preservation, labeling, and barcoding services for marine propellers in full compliance with MIL-DTL-2845E, P-245-0146, and MIL-STD-129R standards, with all barcodes required to adhere to ISO/IEC-16388-2007 Code 39 specifications. Services must ensure secure, durable, and militarily approved handling of propellers through proper preservation techniques, clear identification labeling, and accurately formatted barcodes to support logistics and inventory tracking across defense supply chains. The work is to be performed at Curtis Bay, Maryland, with a ZIP code of 21226, and is categorized as a Small Business Set Aside under NAICS code 561910, reserved exclusively for small businesses. The opportunity was posted on August 3, 2026, with a strict response deadline of August 13, 2026, at 5:00 PM, and is managed by the Department of Homeland Security’s Sflc Procurement Branch 2.

Packaging and Labeling Services

POSTED

DEADLINE

Marine Propeller Manufacturing and SupplyThe contract requires the manufacture, testing, packaging, and delivery of seven marine propellers identified by NSN 2010-01-534-9089, all of which must strictly comply with MIL-DTL-2845E and other referenced military specifications to ensure performance and reliability in operational environments. The work involves full production lifecycle support including quality assurance, verification testing, and proper packaging for secure transport, with final delivery mandated to meet military readiness standards. This is a Small Business Set Aside contract under NAICS code 336612, awarded by the Department of Homeland Security’s SFLC Procurement Branch 2, with performance to occur at Curtis Bay, Maryland, 21226. Proposals must be submitted by August 13, 2026, at 5:00 PM Eastern Time, and the opportunity is exclusively reserved for small businesses as defined by the SBA, aiming to promote small business participation in defense-related manufacturing.

POSTED

DEADLINE

Insufficient Data to Identify Specific Subcontract OpportunitiesThis contract is a Small Business Set Aside under the Department of Homeland Security’s Sflc Procurement Branch 2, designated exclusively for small businesses with no further细分 or specific deliverables outlined. The solicitation was posted on August 3, 2026, with a response deadline of August 13, 2026, and performance is expected to take place in Curtis Bay, Maryland, with ZIP code 21226. No Statement of Work, CLINs, NAICS code, point of contact, or details regarding the nature of goods or services required are provided, making it impossible to determine the scope of work or potential supplier opportunities. The contract is structured as a subcontract with all necessary documentation withheld, and no organizational or geographical information beyond the place of performance is available.

POSTED

DEADLINE

Onsite Offload Support and Coordination

Packaging and Labeling Services

POSTED

DEADLINE

Logistics and Delivery of Hazardous Fluid to Sitka, AK

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Supply of Biodegradable Hydraulic Fluid (Shell 68)

All Other Miscellaneous Chemical Product and Preparation Manufacturing

POSTED

DEADLINE

PROPELLER, MARINE

Solicitation # 70Z08526Q40231B00

The U.S. Coast Guard Surface Forces Logistics Center is soliciting quotes for a Firm Fixed Price Purchase Order for seven marine propellers, identified by NSN 2010-01-534-9089 and part number 6ES7214-1AG40-0XB0, under solicitation number 70Z08526Q40231B00. This is a Small Business Set Aside opportunity with responses due by August 13, 2026, and only vendors actively registered in SAM.gov may submit quotes. Substitutions are strictly prohibited without prior approval from USCG SFLC technical experts, and all items must conform to Construction Specification for WLIC WLR POST IRESSS, packaged per MIL-DTL-2845E and P-245-0146, labeled and barcoded in accordance with MIL-STD-129R and ISO/IEC-16388-2007 Code 39 symbology. Packaging must meet MIL-STD-2073-1E standards, ensure protection against damage and corrosion, and include all required markings: NSN, part number, purchase order number, vendor name, quantity, and the designation “COAST GUARD SFLC MATERIAL CONDITION (A).” Delivery must be FOB destination to Baltimore, MD 21226, with shipments received only Monday through Friday between 8 a.m. and 3 p.m., and all packaging lists must be securely attached to the shipment. Payment terms are NET 30 under the FAR 52.232-25 Prompt Payment clause, and all invoices must be submitted via the Integrated Payment Portal (IPP) at www.ipp.gov as non-PO invoices, including the contract number, vendor UEI and TIN, CAGE code, PO item number, item description, unit and extended prices, and shipping costs as a separate line item. Freight charges exceeding $100 require a separate freight invoice. Vendors are responsible for notifying the Contracting Officer at least seven calendar days in advance of readiness for Quality Assurance inspections. The shipment must be delivered to USCG Surface Forces Logistics Center at 2401 Hawkins Point Road, Building 88, Receiving Room, Baltimore, MD 21226, and any changes to delivery schedules or tracking must be communicated promptly. The point of contact

Other Engine Equipment Manufacturing

POSTED

DEADLINE

TRS-3D /AN/SPS-75 Radar repairs/ overhaul services

Solicitation # 70Z08526RRJ001B00

The United States Coast Guard, through the Long Range Enforcer Product Line, is soliciting repair and overhaul services for the AN/SPS-75 Air Search Radar System, a critical asset for air search and detection operations. The contract requires comprehensive technical services including disassembly, inspection, condition and test reporting, repairs, reassembly, testing, preservation, packaging, packing, and marking of the system to ensure it remains fully mission-capable. Northern Defense Industries, LLC is the only authorized U.S. vendor for these services, underscoring the specialized nature of the work. The solicitation, numbered 70Z08526RRJ001B00 and titled TRS-3D /AN/SPS-75 Radar repairs/overhaul services, is issued under NAICS code 811210 by the Sflc Procurement Branch 2 within the Department of Homeland Security, with performance to occur in Baltimore, Maryland. Proposals are due by August 17, 2026, and no set-aside provisions apply. Offerors must submit a signed Non-Disclosure Agreement to access Protected Critical Infrastructure Information, Sensitive Security Information, and Sensitive but Unclassified data, with strict compliance required under the Critical Infrastructure Information Act of 2002, 6 CFR Part 29, and 49 CFR Part 1520. All personnel must safeguard information, preserve all markings, and return or surrender materials upon request or completion of duties. Additionally, offerors must complete and submit the Past Performance Information Form to demonstrate relevant experience, and all inquiries must be submitted in writing to designated points of contact with specific vendor and reference information. The contract value, period of performance, delivery schedule, and detailed evaluation criteria are not specified in the available documentation.

Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

in about 1 month

BEARING HEAVY, 4.33

Solicitation # 70Z08526Q40233B00

The U.S. Coast Guard Surface Forces Logistics Center is soliciting quotes for a Firm Fixed Price Purchase Order for 24 heavy bearings with NSN 3110-01-F11-2241 and part number 23222CC/W33, with no substitutions permitted without prior approval from Coast Guard technical experts. The bearings must meet exact technical specifications including a 110 mm bore diameter, 200 mm outside diameter, 69.8 mm outer ring width, 2.75 inch overall width, round bore, non-split outer ring, lubrication grooves and holes, C0 internal clearance, open closure, steel cage and bearing material, inner ring guided cage, maximum operating temperature of +390°F, dynamic load capacity of 600 kN, static load capacity of 765 kN, and maximum RPM of 3200. All items must be individually packaged in accordance with MIL-DTL-197M Method 33B, Level B, using MIL-PRF-16173 Class II, Grade 2 preservative wrapped in PPP-B-1055 barrier material inside a MIL-DTL-117 Type 3, Class B, Style 1 heat-sealable bag and an ASTM-5118 fiberboard box with proper cushioning and dunnage. Each package must be labeled per MIL-STD-129R and barcoded using Code 39 symbology, and clearly marked with the NSN, part number, purchase order number, quantity, condition “A”, and the phrase “Coast Guard SFLC Material.” Delivery is required FOB destination to 2401 Hawkins Point Road, Building 88, Receiving Room, Baltimore, MD 21226, with all freight and delivery charges included in the quoted price. Shipments must arrive Monday through Friday between 8 a.m. and 3 p.m. and must be accompanied by an itemized packaging list referencing the purchase order number. All vendors must be actively registered in SAM.gov and eligible to receive federal awards; responses are limited to small business concerns under a Total Small Business Set Aside with NAICS code 333618. Quotes must be submitted by August 13, 2026, at 5:00 p.m. and will be evaluated for compliance with technical, packaging, and

Other Engine Equipment Manufacturing

POSTED

DEADLINE

USCGC Kukui Biodegradable Hydraulic Fluid

Solicitation # 70Z08526Q0026995

The contract is for the procurement and delivery of ten 55-gallon barrels of Shell Biodegradable Hydraulic Fluid 68 to support maintenance operations on the CGC Kukui’s Controllable Pitch Propellers, with a firm-fixed-price structure under a Small Business Set Aside. Delivery must be completed between October 1 and October 31, 2026, to the cutter’s location at 1480 Seward Avenue, Sitka, Alaska, 99835. The contractor is responsible for both transportation and offloading, with onsite guidance provided by the cutter’s crew regarding the proper unloading point. Acceptance of the product is strictly contingent upon the submission and verification of SDS Number 800010042431, ensuring compliance with environmental and safety standards. Performance will be monitored by the CGC Kukui’s Engineer Officer, and reporting responsibilities fall to the cutter’s HAZMAT and Engineer Officers. All contractual obligations must adhere to applicable federal, state, and local laws. The solicitation, issued under number 70Z08526Q0026995 with a NAICS code of 336611, closed for responses on August 10, 2026, and is managed by the Department of Homeland Security’s SFLC Procurement Branch 2 located in Alameda, California.

Ship Building and Repairing

POSTED

DEADLINE

Crane Services for Load Bank PlacementThe contract requires the provision of crane services to securely place a 1500 KW load bank on either the pier or aboard the USCGC Waesche, encompassing all associated mobilization, rigging, and coordination with ship engineers to ensure safe and precise installation. The work must be executed in compliance with maritime safety standards and in close alignment with the vessel’s operational requirements, with the contractor responsible for managing all logistics and on-site procedures to complete the task efficiently and without disrupting vessel activities. This subcontract is designated as a Small Business Set Aside under NAICS code 238990, with responses due by August 5, 2026, and the opportunity posted on July 31, 2026. The place of performance is specified as zip code 94501, indicating the work will occur in the San Francisco Bay Area, under the oversight of the Department of Homeland Security’s SFLC Procurement Branch 2. Participation is restricted to qualified small businesses, and the contractor must demonstrate the capability to handle heavy-load crane operations in a maritime environment while maintaining full coordination with U.S. Coast Guard personnel.

All Other Specialty Trade Contractors

POSTED

DEADLINE

in about 18 hours