Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Antiterrorism Awareness Training (if deployed personnel)

Active

Federal

Response Deadline07/31/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the provision of antiterrorism awareness training to contractor personnel who are set to deploy outside the United States, in strict alignment with Department of Defense requirements. This training is mandatory to ensure all personnel are prepared to identify and respond to terrorist threats while operating in high-risk overseas environments. The training must meet DOD standards and is intended to enhance the safety and readiness of individuals supporting defense-related missions abroad. The solicitation is issued as a subcontract under the Defense Logistics Agency, part of the Department of Defense, with a NAICS code of 611512 indicating it falls under other schools and instruction services. The place of performance is specified as San Diego, California, with a zip code of 92145-2025, suggesting coordination and administration may originate from this location. The submission deadline is July 31, 2026, and the opportunity was posted on July 20, 2026, allowing potential providers a limited window to prepare and respond. The contract is not subject to any set-aside provisions, indicating it is open to all qualified contractors regardless of business size or ownership characteristics.

General Info

Mandatory antiterrorism training for deployment-bound personnel, per DOD standards, due July 31, 2026, in San Diego.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

611512 - Flight TrainingView NAICS

Place of Performance

SAN DIEGO, CA, 92145-2025, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 20

subcontract

Response DeadlineJul 31

Submission deadline

Response Deadline

07/31/2026, 05:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Provide antiterrorism awareness training for contractor personnel deploying outside the U.S., in accordance with DOD requirements.

Similar Contracts

Same NAICS industry code

On-Site Safety and Compliance Training DeliveryThe contract requires the delivery of comprehensive on-site safety training to contractor personnel before they gain access to the facility, including initial Contractor Safety Orientation and Job Safety Analysis training, with mandatory annual refreshers to maintain compliance. All training must be properly documented and managed to ensure accountability, adherence to safety standards, and readiness for audit or inspection. The training program must be delivered at the specified location with zip code 60439, consistent with the operational needs of the Department of Energy as administered by Argonne National Laboratory as the DOE contractor. The solicitation is classified as a subcontract under NAICS code 611512, targeting providers of training and educational services, with responses due by July 23, 2026. The effort is intended to reinforce a culture of safety and regulatory compliance among all contractor staff working within the facility, emphasizing proactive risk mitigation and standardized safety procedures. The training must be delivered effectively and efficiently to meet the requirements of a federal nuclear and scientific research environment, ensuring all personnel are fully prepared to operate safely under stringent regulatory conditions.

Argonne National Labor - DOE Contractor

POSTED

DEADLINE

Heavy Aircraft Simulator ServicesThe U.S. Air Force Test Pilot School is seeking commercial heavy aircraft simulator services under a Firm Fixed Price one-year purchase order through a small business set-aside solicitation numbered FA930426Q5002, with a maximum anticipated value of $350,000. The requirement mandates the provision of both a Boeing wide-body (>300,000lbs MTOW) and an Airbus wide-body (>300,000lbs MTOW) full-motion Level-D simulator at a single location to enable direct side-by-side comparisons during training and evaluation flights. The newest models of these aircraft are highly preferred, though the government retains the authority to accept narrow-body simulators if wide-body platforms are unavailable. The simulators must support a comprehensive suite of flight evaluations including takeoff and landing performance under extreme conditions, flight control system assessments in normal and degraded modes, stall and envelope protection testing, automation and flight management system validation, emergency procedure execution using electronic checklists, and training in historical aviation accidents. Additionally, the simulators must be available for use in Test Management Projects, which involve team-based research and development activities conducted by TPS students and staff. Proposals must include full compliance with the Performance Work Statement and must be submitted as a single PDF email attachment no larger than 10MB to carlos.barrera.8@us.af.mil by 4:00 PM PDT on July 20, 2026, with no late submissions accepted. Offerors must provide detailed contractor information including SAM UEI, TIN, CAGE code, payment terms, point of contact, warranty, FOB destination, estimated delivery lead time, and the offer expiration date. Evaluation will be based on a Best Value Continuum where technical acceptability—specifically the ability to provide the required simulators and support services—is weighted more heavily than price, with only technically acceptable quotations being considered for award. The contract incorporates stringent cybersecurity requirements under DFARS 252.204-7012, and mandates compliance with numerous FAR and DFARS clauses related to ethics, debarment, defense information protection, telecommunications restrictions, and whistleblower protections. Payment will be processed via the Wide Area WorkFlow system using Invoice 2in1 for fixed-price services, and all contractors must maintain active SAM registration under applicable deviations for the solicitation.

FA9304 Aftc Pzz

POSTED

DEADLINE

Hazardous Materials Personnel TrainingThe contract calls for the development and delivery of comprehensive Hazardous Communications training programs targeting contractor personnel, with a focus on interpreting Safety Data Sheets, understanding chemical labeling requirements, responding to emergencies involving hazardous materials, and executing safe handling procedures. Training must be designed to meet specific regulatory and operational standards, ensuring all participants gain practical knowledge to manage risks associated with hazardous substances in a defense-related environment. The requirement is structured as a subcontract under the NAICS code 611512, indicating a focus on professional and management training services, and is tied to the Department of Defense through its Medical Supply Chain organization. The solicitation was posted on July 19, 2026, with a response deadline of July 27, 2026, indicating a tight turnaround for proposals. The place of performance and point of contact details are not specified, suggesting flexibility in delivery location, though execution will likely occur at DoD-supported sites. Contractors must align their programs with federal hazardous materials communication guidelines and be prepared to demonstrate experience in military or defense sector training delivery. Although no set-aside designation is listed, bidders are expected to address the scope thoroughly, ensuring materials are current, adaptable, and capable of certification or compliance verification.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

HAZWOPER & Environmental Safety Training DeliveryThe contract requires the delivery of OSHA-compliant 40-hour HAZWOPER training and annual 8-hour refresher courses, covering critical safety topics such as bloodborne pathogens, radiation safety, and emergency response procedures. The training must meet all federal standards to ensure personnel working with hazardous materials are properly prepared and certified, with ongoing education to maintain compliance and safety awareness. The services are intended for a workforce requiring certification under HAZWOPER regulations, with an emphasis on practical, hands-on instruction and up-to-date protocols aligned with current environmental and occupational health standards. This subcontract is posted by the Environmental Protection Agency with a response deadline of September 23, 2026, and falls under NAICS code 611512, which classifies it as other schools and instruction. The place of performance and specific location details are not provided, suggesting training may be delivered across multiple sites or regions as needed. The contract does not specify a set-aside status, and there is no designated point of contact listed, implying bidders should refer to the public posting for full submission guidelines and requirements.

Environmental Protection Agency

POSTED

DEADLINE

Piaggio P-180 Avanti BPAThe U.S. Air Force Test Pilot School at Edwards Air Force Base is seeking a Firm Fixed Price Blanket Purchase Agreement (BPA) under a small business set-aside to procure a Piaggio P-180 Avanti aircraft and qualified flight instructors for Qualitative Evaluation flights, primarily conducted at Mojave Air and Space Port with alternate locations at Edwards AFB, Lancaster, CA, or other mutually agreed sites. The acquisition is structured as a non-personal services contract with a five-year ordering period and an option to extend by six months, with a total estimated value not to exceed $350,000 per offeror over the life of the agreement. The NAICS code is 611512 for Flight Training with a size standard of $34 million, and all proposals must be submitted via email to the designated contracting officers with a maximum file size of 10 MB. The offeror must provide comprehensive contractor information including SAM UEI, TIN, CAGE code, payment terms, point of contact, warranty, offer expiration date, FOB Destination, and estimated delivery lead time, along with a completed copy of FAR 52.212-3 Alt I or confirmation that representations are available on SAM.gov, and a detailed pricing list guaranteed valid for at least one year. The technical evaluation centers solely on the offeror’s ability to provide the required aircraft and flight instructors, with technical acceptability being the primary factor and deemed more critical than price. Award will be made based on the Best Value Continuum, where the highest-ranked technical proposal is evaluated for acceptability before considering price. Offerors must fully comply with all solicitation requirements, including submission of the updated Performance Work Statement (Ver 4.0) and its referenced appendices, which outline deliverables such as aircraft documentation, pilot certifications, briefing materials, and maintenance logs. The aircraft must pass a USAF TPS-approved SME inspection and may display historically representative markings. Insurance requirements are governed by FAR 28.3, with minimum levels per FAR 28.307-2, and contractors must adhere to Privacy Act, FOIA, CUI, and security protocols including DD254 compliance. The government will conduct inspections within seven workdays and may perform 100 percent quality surveillance on infrequent or safety-critical tasks. All contract records are government property, subcontractors require prior approval, and immediate notification of any debarment or suspension status is mandatory. Offers are due by

FA9304 Aftc Pzz

POSTED

DEADLINE

Section 3 Certified Labor Recruitment and TrainingThe contract seeks a subcontractor to deliver workforce recruitment, job training, and placement services specifically tailored to low- and very low-income residents in accordance with HUD Section 3 requirements, aiming to create economic opportunities for disadvantaged populations in Georgia. The services must align with federal guidelines to ensure that training and employment outcomes prioritize local residents while fostering long-term career pathways in growing industries. The solicitation is open to qualified providers who can demonstrate experience in workforce development, community outreach, and successful placement metrics. The opportunity is structured as a subcontract under the Lowndes County Board of Commissioners, with a response deadline of August 17, 2026, and a NAICS code of 611512, indicating a focus on other schools and instruction related to job training and vocational education. Performance will occur within Georgia, though specific city or zip details are not provided. Interested parties must submit proposals prior to the deadline and be prepared to comply fully with HUD Section 3 mandates, including documentation of resident eligibility and measurable outcomes tied to employment retention and wage growth. The contract is posted on the Georgia state procurement portal for transparency and public access.

Lowndes County Board of Commissioners

POSTED

DEADLINE

Individualized Housing Needs Assessment & Case ManagementThis contract involves conducting one-on-one housing needs assessments for employees of Charlotte Mecklenburg Schools and managing individualized housing plans from initial intake through to resolution. The work requires personalized case management to identify housing challenges and develop tailored solutions that support employee stability and well-being. The services are to be delivered under a subcontract arranged by the North Carolina agency overseeing Charlotte Mecklenburg Schools, with the North American Industry Classification System code 611512 indicating its alignment with other educational support services. The opportunity was posted on July 14, 2026, and proposals must be submitted by July 30, 2026, with no specified set-aside or location details provided for performance, suggesting potential flexibility in service delivery.

Charlotte/mecklenburg Schools

POSTED

DEADLINE

Tactical Vehicle Technical Training and On-Site SupportThe contract seeks a subcontractor to deliver comprehensive operator and maintenance training for military personnel at Canadian Forces Base Gagetown and Canadian Forces Base Trenton, following the fielding of new tactical vehicles. Training will be conducted on-site at these locations and must ensure personnel are fully proficient in operating and maintaining the vehicles in operational environments. The work is classified under NAICS code 611512, indicating it pertains to professional and commercial training services, and is being procured by the Department of National Defence on behalf of the Government of Canada. Performance is restricted to locations in New Brunswick and Ontario, excluding the National Capital Region, ensuring focused support in key operational zones. The solicitation was posted on July 14, 2026, with responses due by August 5, 2026, allowing potential bidders a limited window to prepare and submit proposals. While the contract type is noted as a subcontract, the detailed scope implies direct engagement with military units, requiring trainers to be highly qualified, security cleared, and capable of delivering hands-on instruction under field conditions. The absence of a set-aside designation means all eligible vendors may compete, though experience in defense training and familiarity with military vehicle systems will be critical factors in evaluation. The contract aims to enable rapid operational readiness following vehicle delivery, emphasizing responsiveness, technical accuracy, and alignment with Canadian Armed Forces standards.

Department of National Defence

POSTED

DEADLINE

Aircrew Training Services DeliveryThe contract seeks subcontracted services to deliver comprehensive military aircrew training encompassing classroom instruction, simulator-based exercises, flight evaluations, and curriculum development for initial, recurrent, and mission-specific training programs. Training must be designed to meet evolving operational standards and is intended to support readiness across all phases of aircrew development, from foundational skills to advanced mission proficiency. The work is performance-based and requires adherence to rigorous military training protocols, with deliverables aligned to readiness objectives for aviation units. The contract is issued under NAICS code 611512 for other schools and instruction and is part of the Department of Defense’s Maritime Supply Chain initiative, with performance centered at Cherry Point, North Carolina, 28533-5040. The solicitation was posted on July 12, 2026, with responses due by July 23, 2026, and is designated as a subcontract opportunity under a larger government procurement framework. While no set-aside status or point of contact is specified, potential bidders must be prepared to demonstrate expertise in military aviation training systems, facility capability for simulator operations, and proven experience in curriculum design tailored to defense training requirements.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Clinical Staff Training ServicesThis contract requires the provision of hands-on training for up to 15 clinical staff members at each designated site on the operation, safety protocols, and data management functionalities of leak tester systems. The training must be delivered in person and tailored to ensure personnel are fully competent in using the equipment safely and accurately, with a focus on practical application. The opportunity is a subcontract issued under a Total Small Business Set-Aside, meaning only small businesses qualify to bid, and it is classified under NAICS code 611512, indicating it falls within the category of other business and technical training. Performance is required at a location in Topeka, with a zip code of 66622, and the solicitation was posted on July 12, 2026, with responses due by July 22, 2026. The contracting office is the 255-NETWORK Contract Office 15 under the Department of Veterans Affairs, and the effort is designed to enhance clinical workforce readiness for specific medical equipment.

255-NETWORK Contract Office 15 (36C255)

POSTED

DEADLINE

in about 22 hours

Safety Compliance and OSHA 30 Training Coordination

POSTED

DEADLINE

OSHA Training and Safety Compliance ServicesThe contract seeks the delivery of OSHA 10-hour safety training tailored for supervisory personnel, alongside ongoing support for a comprehensive safety program. The training is intended to ensure compliance with federal safety standards and to equip supervisors with the necessary knowledge to maintain safe work environments, particularly within the context of sewer operations under the Department of Public Works in Massachusetts. The solicitation is structured as a subcontract and is categorized under NAICS code 611512, which pertains to other schools and instruction services focused on occupational safety and health training. Proposals must be submitted by the deadline of July 23, 2026, at 3:00 PM, with the posting date set for July 9, 2026. The place of performance is not explicitly specified beyond the state of Massachusetts, and no set-aside provisions or organization type restrictions are indicated. The contract does not include detailed point of contact information in the provided data, but responders are expected to engage through the designated procurement portal. The services required are operational and continuous, emphasizing not just initial training delivery but also sustained safety program enhancement and regulatory adherence over time.

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Supply of Epinephrine Injection (NSN: 6505015273957)The contract mandates the manufacture, packaging, labeling, and delivery of FDA-approved Epinephrine Injection meeting all current Good Manufacturing Practices and Defense Logistics Agency specifications, with the final product destined for a U.S. Navy vessel under FOB Destination terms. The product is identifiable by National Stock Number 6505015273957 and falls under the NAICS code 283410, indicating its classification within pharmaceutical manufacturing. All activities must adhere strictly to regulatory and military standards to ensure safety, potency, and compliance throughout the supply chain. The agreement is structured as a subcontract managed under the Department of Defense through the Defense Logistics Agency, with the work scheduled to be performed in alignment with federal procurement timelines and delivery protocols. The contract was posted on July 20, 2026, and the delivery endpoint is a U.S. Navy vessel, requiring precise logistical coordination and documentation to meet military operational needs. The product must be fully compliant with both FDA and DLA requirements, including proper labeling, traceability, and packaging suitable for military transport and storage conditions.

POSTED

DEADLINE

Wiper Ring Supply – Precision Sealing ComponentThe contract entails the supply of 17 precision-engineered wiper rings, identified by Part Number 351-44900-330A and National Stock Number 5330-01-284-1598, manufactured to meet specific military standards for performance and reliability. Each unit must comply with all relevant technical and quality requirements, including proper packaging and labeling as dictated by defense regulations. Delivery must be completed in full accordance with established logistical protocols to ensure operational readiness and traceability. The contract is structured as a subcontract under the authority of the Defense Logistics Agency, part of the Department of Defense, and classified under NAICS code 332996, indicating its focus on other fabricated metal product manufacturing. The solicitation was posted on July 20, 2026, and performance is expected to align with DLA’s supply chain directives, though the specific delivery location and point of contact are not detailed. Access to official contract records is available through the DIBBS portal using the provided reference number.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

DEADLINE

Cybersecurity Compliance for Covered Defense InformationThe contract requires the implementation and ongoing maintenance of cybersecurity controls aligned with NIST SP 800-171 to protect covered defense information handled by the contractor. This includes establishing and sustaining a compliant security posture across systems and networks that process, store, or transmit sensitive defense data, ensuring that all required controls are properly configured, monitored, and documented. The contractor must also be prepared to support timely and accurate cyber incident reporting in accordance with federal requirements, enabling rapid response and coordination with defense authorities when security breaches or anomalies occur. This subcontract falls under the NAICS code 541512 for computer systems design services and is issued by the Defense Logistics Agency under the Department of Defense. The work is focused on sustaining compliance with stringent federal cybersecurity standards, and while no specific location is listed for performance, the obligations apply wherever covered defense information is accessed or managed. The contract underscores a critical requirement for continuous adherence to NIST controls and active participation in the defense cyber incident response framework, making cybersecurity expertise and operational readiness key to successful contract execution.

Computer Systems Design Services

POSTED

DEADLINE

Hazardous Materials Compliance & DocumentationThe contract requires strict adherence to OSHA Hazard Communication standards and DFARS 252.223-7001 for all hazardous materials linked to connectors, ensuring proper labeling and accurate safety data sheet generation to meet federal regulatory requirements. All documentation must align with current guidelines to facilitate safe handling, storage, and disposal of chemical substances used in the procurement and integration of these components. This subcontract, issued under NAICS code 541620 by the Defense Logistics Agency within the Department of Defense, mandates compliance as a non-negotiable condition of performance. While specifics on location or point of contact are not provided, the obligation extends to all stages involving hazardous materials associated with connectors, and failure to deliver compliant labeling and SDS documentation could result in contract non-compliance. The posting date indicates this requirement is active for future performance beginning in 2026.

Environmental Consulting Services

POSTED

DEADLINE

Quality Assurance and Inspection ServicesThe contract requires the performance of zero-defect quality inspections using either MIL-STD-1916 or ASQ H1331 sampling methods to verify that all delivered products meet the stringent acceptance standards of the Defense Logistics Agency. These inspections are critical to ensuring full conformance and are conducted to support DLA’s mission of reliably supplying defense systems and materiel with no tolerance for nonconformities. The work is classified under NAICS code 541330, indicating it falls within the professional, scientific, and technical services sector, specifically in the realm of quality assurance and inspection. The contract is structured as a subcontract and is tied directly to DLA operations under the Department of Defense, with performance expected to align precisely with federal quality benchmarks without deviation. All activities must be executed to guarantee that every unit received by DLA is fully compliant, with no room for defective or nonconforming product acceptance.

Engineering Services

POSTED

DEADLINE

Packaging and Marking of Military-Grade ComponentsThe contract requires the provision of packaging and marking services for electrical connectors in strict compliance with MIL-STD-2073-1E for packaging standards and MIL-STD-129 for item marking, all in support of the Defense Logistics Agency. The components are destined for military use under the Department of Defense and must meet exacting federal specifications to ensure durability, traceability, and logistical compatibility across the defense supply chain. The work is structured as a subcontract under NAICS code 423840, which pertains to wholesale trade of electronic components and equipment, indicating the scope is focused on preparation and shipment readiness rather than manufacturing. Performance is expected to align with DLA’s standards for federal supply systems, though no specific location for performance or point of contact is listed. The solicitation is posted under contract SPE7M126V050N and was published on July 20, 2026, with no set-aside provisions indicated, meaning it is open to all qualified subcontractors. Full adherence to military standards is critical, as non-compliance could result in rejection of shipments, delays in delivery, or financial penalties. All packaging must preserve the integrity of the connectors during transport and storage, while marking must include universally recognized DOD identifiers, barcodes, and data matrix codes to enable automated receipt and inventory management at military depots worldwide.

Industrial Supplies Merchant Wholesalers

POSTED

DEADLINE

Supply of Electrical Plug Connectors (MS3406D40-56P / NSN 5935011427787)The contract entails the manufacture and supply of 43 military-spec electrical plug connectors specified as MS3406D40-56P with the NSN 5935011427787, all of which must fully comply with applicable MIL standards to ensure reliability and interoperability in defense systems. The item is critical for military applications requiring high-performance electrical connections under demanding environmental and operational conditions. This is a subcontract issued under the authority of the Defense Logistics Agency within the Department of Defense, with a posting date of July 20, 2026, indicating it is part of a broader procurement effort managed through the DLA’s contracting system. The NAICS code 334417 confirms the scope falls within the aerospace and electronic component manufacturing sector. Performance location and specific delivery details are not yet defined, and no set-aside provisions are indicated, meaning the contract is open to all eligible contractors. The sole point of reference for award and tracking purposes is the DIBBS system under contract number SPE7M126V050N.

Electronic Connector Manufacturing

POSTED

DEADLINE

Domestic Freight and Delivery to DLA DepotTwo reconditioned circuit card assemblies must be transported from the rework facility to the DLA Distribution Depot in Tracy, California, with delivery required no later than August 19, 2026. The shipment is governed by FOB Origin terms, meaning the buyer assumes all risk and responsibility for the goods once they leave the rework facility. The contract falls under NAICS code 484220, indicating it is a domestic freight transportation service, and is classified as a subcontract within the Department of Defense framework. The Defense Logistics Agency is the contracting organization, and the work is being performed under solicitation SPE4A626PX555, with the opportunity posted on July 20, 2026.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Supply Chain Traceability and Documentation ServicesThe contract requires the compilation and verification of detailed documentation to establish the prior government ownership and reconditioning history of surplus electronic items, ensuring full compliance with federal requirements prior to submission. This work is critical for maintaining the integrity and traceability of the defense supply chain, as accurate records are necessary to confirm legal and regulatory adherence throughout the lifecycle of the equipment. The contractor must rigorously authenticate provenance and reconditioning data to support transparency and accountability in the disposition process. This subcontract is part of a larger effort managed by the Defense Logistics Agency under the Department of Defense, aligning with NAICS code 541611 for management consulting services. The project involves meticulous record gathering, validation, and formatting to meet stringent government standards, with no specific location specified for performance. The solicitation was posted in July 2026 and is tied to contract SPE4A626PX555, indicating its role within an established procurement pathway for supporting defense logistics operations.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Inspection, Packaging, and Marking of Reconditioned ElectronicsThe contract pertains to the final inspection, preservation, packaging, and labeling of reconditioned circuit card assemblies to ensure full compliance with military packaging and marking standards. This effort is critical to maintaining the integrity, functionality, and traceability of electronic components used in defense systems, requiring strict adherence to established federal and military specifications throughout every phase of handling. The work involves detailed quality control procedures to verify that each assembly meets performance criteria prior to being preserved against environmental degradation, securely packaged, and accurately labeled in accordance with mandated military protocols. This subcontract is issued under the Department of Defense, specifically managed by the Defense Logistics Agency, and falls under the NAICS code 493190 for other warehousing and storage. The solicitation was posted on July 20, 2026, and the place of performance is not specified, suggesting the work may be conducted at any approved contractor facility capable of meeting the rigorous defense standards. The contract's purpose is to support the sustainment and readiness of military electronics by ensuring that reconditioned components are handled, stored, and shipped with the same precision and reliability as new units, thereby reinforcing the logistical backbone of defense operations.

Other Warehousing and Storage

POSTED

DEADLINE

Reconditioning of Government Surplus Circuit Card AssembliesThe contract entails the reconditioning of government surplus circuit card assemblies to restore them to original technical specifications and military standards for reuse. This involves the systematic replacement of expired or degraded components, thorough functional testing to ensure operational integrity, and adherence to all applicable military performance and reliability requirements. The work must be performed with precision to guarantee that the returned assemblies meet the identical functional and environmental criteria as newly manufactured units, ensuring they are fully viable for military systems and platforms. This subcontract is issued under the Defense Logistics Agency within the Department of Defense and falls under NAICS code 334418 for electronic component and product manufacturing. The solicitation was posted on July 20, 2026, and the performance location and point of contact details are not specified, though the work is tied to DLA’s broader initiative to extend the life cycle of critical electronic assets. The contractor is expected to deliver reconditioned assemblies that are fully compliant, documented, and ready for immediate integration into defense systems without the need for additional modification or qualification.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

DEADLINE

Fuel Additive Supply (FSII, SDA, CI/LI)The contract entails the supply of aviation fuel additives including Fuel System Ice Inhibitor FSII, Static Dissipative Additive SDA, and Corrosion Inhibitor/Lubricity Improver CI/LI in either bulk or pre-mixed formulations, all of which must meet rigorous military performance specifications to ensure seamless integration into operational fuel batches. These additives are critical for maintaining fuel system integrity, preventing ice formation, managing static discharge, and inhibiting corrosion across a wide range of environmental and operational conditions encountered by military aviation platforms. The award is structured as a subcontract under the Defense Logistics Agency within the Department of Defense, with the North American Industry Classification System code 325992 indicating specialty chemical manufacturing. The solicitation was posted on July 20, 2026, and performance is expected to support defense operations without geographic restrictions specified, implying nationwide or global applicability. The contract does not indicate a set-aside classification or specific point of contact, suggesting a broad procurement approach aimed at qualified suppliers capable of meeting stringent military quality and delivery requirements for mission-critical fuel additives.

Photographic Film, Paper, Plate, Chemical, and Copy Toner Manufacturing

POSTED

DEADLINE