Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Arc-Rated and Flame-Resistant Safety Apparel Supplier

Open

State & Local

Response Deadline11/12/2026, 02:00:00 PM CST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

Tennessee → Nashville Electric Service

NAICS

315220 - Men’s and Boys’ Cut and Sew Apparel Manufacturing

Place of Performance

Nashville, TN, USA

Set-Aside

NONE

Documents

This scope was carved out of Z5517.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Rain Overalls

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 6

subcontract

Response DeadlineNov 12

Submission deadline

Response Deadline

11/12/2026, 02:00:00 PM CSTin 6 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyTennessee → Nashville Electric Service

ContactsNo contacts available

OfficeN/A

Organization / AgencyTennessee → Nashville Electric Service

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies specialized protective clothing for prime contractors on Nashville Electric Service (NES) utility projects. Provides arc-rated and flame-resistant coveralls, pants, and shirts complying with NFPA 70E, ASTM F1891-12, and ASTM F2733-17. Incorporates 2-inch retroreflective material around knees and calves per ANSI 107-2015. Delivers finished safety apparel meeting exact technical specifications within specified calendar days.

Similar Contracts

Same NAICS industry code

Industrial Safety Belt Manufacturing and SupplyThis subcontract involves the manufacturing and supply of 9,000 industrial safety belts for prime contractors supporting the Defense Logistics Agency. The contractor is responsible for sourcing or producing belts identified by NSN 4240-01-627-7870, ensuring strict adherence to TDP Rev A Gen 1 technical drawings. All deliverables must meet rigorous military standards, including packaging per MIL-STD-2073-1E, marking per MIL-STD-129, and palletization according to RP001. Managed by the Department of Defense through DLA DIST San Joaquin, the contract falls under NAICS code 315220. The place of performance is located in Tracy, California. Interested parties must respond by November 16, 2026, to fulfill the requirement for these standardized safety components.

DLA DIST SAN JOAQUIN

POSTED

about 4 hours ago

DEADLINE

Tactical and Duty Clothing SupplyThis subcontract for Tactical and Duty Clothing Supply involves providing specialized tactical apparel to prime contractors supporting the City of Myrtle Beach Police and Fire Departments. The scope of work includes the delivery of brand-name duty clothing, specifically highlighting Tac Lit Pro Women’s Long Sleeve Shirts in Dark Navy, while ensuring all items are new and currently in production. The supplier is responsible for managing a wide range of sizing requirements, spanning from Regular S to Oversize 2XL+, to ensure all personnel are properly equipped. This procurement falls under NAICS code 315220 and is managed through the City of Myrtle Beach in South Carolina, with a response deadline set for December 3, 2026.

City Of Myrtle Beach

POSTED

DEADLINE

Men's Pajama Trousers ManufacturingThis subcontract involves the full assembly and sewing of light blue men's pajama trousers for prime contractors supporting the Department of Defense Medical Supply Chain. The scope of work includes cutting and sewing cotton/poly broadcloth, installing elastic waistbands, and attaching three-snap fastener fronts. All finished products must be delivered in packages of 12 and strictly adhere to the Berry Amendment for domestic sourcing, Medical Marking Standard No. 1, and DLA Packaging Requirement RP001. The project is categorized under NAICS code 315220 and will be performed at March ARB in zip code 92518-1831. Interested parties should note the response deadline of November 12, 2026, for this manufacturing requirement.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Supply of Field Pack (NSN 8465-01-696-4281)This subcontract with C AND T Supply Chain involves the supply of Field Packs under NSN 8465-01-696-4281 for prime contractors supporting DLA Troop Support. The provider must act as an original equipment manufacturer or an authorized distributor, ensuring all materials are packaged according to TQ requirement IP025 and FED-STD-313 for hazardous materials. All deliverables must strictly comply with the DLA Master List of Technical and Quality Requirements. The scope of work requires the delivery of two Field Pack units to a FOB Destination within 120 days after the order is placed. This requirement falls under NAICS code 315220 and is associated with the Department of Defense, with performance located in zip code 28310.

C AND T SUPPLY CHAIN

POSTED

DEADLINE

Men's Pajama Trousers SupplyThis subcontract involves the manufacture and supply of men's pajama trousers for prime contractors supporting the Department of Defense Medical Supply Chain. The required garments are X-Large light blue cotton/poly broadcloth trousers featuring elastic waistbands and 3-snap fly closures, specifically meeting NSN 6532-01-706-4934 specifications. Items must be delivered in commercial packaging units of 12, including the manufacturer name and part number to ensure protection and traceability. Performance for this contract is centered at March ARB, with a response deadline set for November 12, 2026.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Storz-Type Coupling Supplier and InstallerThis subcontract agreement with the Butts County Board of Commissioners in Georgia requires a supplier to provide and factory-install 5-inch Storz-type couplings for prime contractors. The scope of work involves installing these couplings on both ends of 75 hose sections to ensure full compatibility with standard US fire-service connections. All deliverables must adhere to current fire-service hose standards and include a written manufacturer's warranty. The contract was posted on November 4, 2026, with a response deadline of December 15, 2026, falling under NAICS code 315220.

Butts County Board of Commissioners

POSTED

DEADLINE

in about 1 month

5-inch Large Diameter Fire Hose (LDH) SupplierThis subcontract agreement with the Butts County Board of Commissioners in Georgia requires the supply of 7,500 linear feet of new, current-production 5-inch Large Diameter Hose for fire and emergency services projects. The supplier is responsible for manufacturing 75 sections of 100-foot hose that are resistant to ozone, mildew, moisture, and abrasion. All delivered materials must adhere to current fire-service hose standards and include individual manufacturer identification for every section. Additionally, the supplier must provide a written warranty for the equipment. The response deadline for this procurement is December 15, 2026.

Butts County Board of Commissioners

POSTED

DEADLINE

in about 1 month

Class A Dress Uniform Package SupplierThis subcontract agreement establishes the requirements for a supplier to provide complete Class A dress uniform packages for prime contractors working on New York State Unified Court System projects. The scope of work includes the sourcing and manufacture of full uniform sets, encompassing caps, ties, dress gloves, and shoes, all of which must strictly adhere to the visual specifications and technical standards defined by the Unified Court System. The selected supplier is responsible for the delivery of 275 complete uniform packages to the Court Officers Academy facility located in Malta, New York. This procurement falls under NAICS code 315220, with a response deadline set for December 2, 2026.

Unified Court System, NYS

POSTED

DEADLINE

Supply of Blanket-Lined Denim Chore CoatsThis subcontract involves the supply of 2,800 durable, machine-washable institutional work coats for prime contractors operating within City of Philadelphia correctional and detention facilities. The required garments are blanket-lined denim chore coats featuring a denim blue outer shell made of 100% cotton denim with a minimum weight of 11.5 oz. The selected provider must supply comprehensive manufacturer specification sheets that detail the materials, construction, and sizing of the coats. This project is managed under the Pennsylvania Prisons agency and is designated for performance in Philadelphia.

POSTED

DEADLINE

Firefighting Turnout Gear & Station UniformsThis subcontract focuses on the manufacture and supply of flame-resistant protective textiles, including structural, proximity, and wildland firefighting turnout coats and pants, as well as daily station uniforms. These items are intended for prime contractors working on projects for the State of Mississippi Department of Finance and Administration. All gear must be produced using high-performance heat-resistant fabrics that comply with the most current NFPA standards and all applicable federal, state, and local safety regulations. The contract requires the delivery of completed uniforms and turnout gear F.O.B. Destination. Interested parties should note that the solicitation was posted on November 2, 2026, with a response deadline of December 16, 2026. The procurement falls under NAICS code 315220 and is managed at the statewide level for the state of Mississippi.

POSTED

DEADLINE

in about 1 month

Supply of Mechanix MG55 Specification GlovesThis subcontract involves the supply of men's and women's gloves for prime contractors on Department of Defense projects managed by C AND T SUPPLY CHAIN. The contractor is responsible for manufacturing or sourcing gloves in sizes small through XXL, strictly adhering to the Mechanix MG55 specification sheet. The scope of work requires the delivery of 22 pairs of gloves FOB Destination to locations in South Dakota and Great Britain. Compliance is a critical component of this agreement, as the provider must ensure all products meet Berry Amendment and DFARS 252.225-7001 requirements. Additionally, the contractor must implement and maintain cybersecurity protections in accordance with DFARS 252.204-7012. The project is categorized under NAICS code 315220, with performance centered in Rapid City, South Dakota.

C AND T SUPPLY CHAIN

POSTED

DEADLINE

Supply of Men's and Women's GlovesThis subcontract through C AND T SUPPLY CHAIN supports Department of Defense requirements by providing men's and women's gloves for prime contractors delivering DLA Troop Support supply contracts. The scope of work involves the manufacture or sourcing of gloves specifically aligned with NSNs 8415-01-677-9240, 8415-01-677-9241, 8415-01-677-9246, 8415-01-677-9248, and 8415-01-667-9250. All deliverables must adhere to MIL-STD-129 standards for marking for shipment and storage, with physical delivery of specified sizes and quantities. The opportunity falls under NAICS code 315220 and is designated for performance in Rapid City, South Dakota. Interested parties must note the posted date of November 1, 2026, with a response deadline set for November 12, 2026.

C AND T SUPPLY CHAIN

POSTED

DEADLINE

More opportunities from Tennessee → Nashville Electric Service

Same awarding agency

Supply of Standard 12-Quart Galvanized Buckets

Metal Service Centers and Other Metal Merchant Wholesalers

POSTED

about 15 hours ago

DEADLINE

Open-Bed Specialized Transport

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 15 hours ago

DEADLINE

Mast Arm and Back Brace Supply

Ornamental and Architectural Metal Work Manufacturing

POSTED

about 15 hours ago

DEADLINE

Supply of Premium XXL Leather Work Gloves

Computer and Computer Peripheral Equipment and Software Merchant Wholesalers

POSTED

about 15 hours ago

DEADLINE

Fluorescent Orange Traffic Cone Supply

Industrial Supplies Merchant Wholesalers

POSTED

about 15 hours ago

DEADLINE

Open-Bed Heavy Equipment TransportThis subcontract for Open-Bed Heavy Equipment Transport involves hauling utility hardware for prime contractors working on Nashville Electric Service projects. The scope of work requires the transport of materials using open top or open flat-bed trucks, with a specific requirement to band materials into convenient bundles to allow for efficient unloading via overhead crane. The primary objective is the delivery of bundled mast arms to designated sites within Nashville. The opportunity is categorized under NAICS code 484220 and was posted on November 6, 2026. Interested parties must submit their responses by the deadline of November 13, 2026. All operations will be performed in Nashville, Tennessee, supporting the infrastructure needs of the Nashville Electric Service.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 15 hours ago

DEADLINE

Utility Mast Arm Fabrication and SupplyThis subcontract involves the fabrication and supply of specialized utility mast arms for prime contractors working on Nashville Electric Service projects in Nashville. The selected provider is responsible for manufacturing mast arms that adhere to EEI-NEMA standards, specifically designed for 60 LB luminaires with a minimum projected area of 2.7 square feet. The scope of work includes the pre-assembly of all applicable back braces, including the installation of necessary fittings and nuts, and the final delivery of these pre-assembled components. This procurement falls under NAICS code 332312 and is managed through the Nashville Electric Service vendor system.

Fabricated Structural Metal Manufacturing

POSTED

about 15 hours ago

DEADLINE

Supplier of Smoke Lens Safety Eyewear

Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 15 hours ago

DEADLINE

Supplier of Camo Mirror XL Safety Eyewear

Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 15 hours ago

DEADLINE

Solicitation # Z5512

Nashville Electric Service is soliciting bids for standard 12-quart galvanized buckets with approximate dimensions of 11 inches at the top, 8.5 inches at the bottom, and 10 inches in height. This procurement is strictly limited to specific approved brands and part numbers, including Dover PK W10120, Wheeling 1122, Behrens 1212, and Dover PK 612. Alternate brands will not be accepted for this inquiry, and vendors seeking to have other products evaluated for future use must contact the buyer directly. Bids must be submitted via the Bid Center by 2:00 pm local time on the close date of November 13, 2026. Offerors are required to state their earliest delivery timeline in calendar days, as delivery speed may be a determining factor in the award process. For any discrepancies between part numbers and descriptions, vendors must seek clarification from the procurement contact, Shanna Faulk, prior to the closing date.

Other Metal Container Manufacturing

POSTED

about 15 hours ago

DEADLINE

Solicitation # Z5513

Nashville Electric Service is soliciting bids for the procurement of specific safety eyewear under solicitation Z5513. The requirement consists of two distinct types of safety glasses: a Camo Mirror XL model featuring a camo frame with anti-fog and mirrored lenses, and a Smoke Lens model that must be anti-fog and anti-scratch. Both products must strictly adhere to ANSI Z-87.1 safety standards. The agency emphasizes that alternate brands will not be accepted for this inquiry, and vendors must provide the exact part numbers specified. Bids must be submitted through the Bid Center by 2:00 pm local time on the close date of November 11, 2026. Offerors are required to state their earliest delivery timeframe in calendar days, as delivery speed may be a determining factor in the award decision. For any discrepancies between ordering descriptions and part numbers, vendors are responsible for contacting the procurement contact, Kyle Kegley, for clarification prior to the closing date.

Ophthalmic Goods Manufacturing

POSTED

about 15 hours ago

DEADLINE

Solicitation # Z5515

Nashville Electric Service has issued solicitation Z5515 for the procurement of XXL leather gloves. The required specifications include premium or select grade cow grain leather with shirred back elastic. Only specific approved manufacturers and part numbers are acceptable: Bear Knuckle GL-338-2XL, Kunz GL 556-XXL, and Youngstown 11-3255-60-XXL. Alternate brands will not be accepted for this inquiry. Bids must be submitted through the Bid Center by 2:00 pm local time on the close date of November 12, 2026. Offerors are required to state their earliest delivery time in calendar days, as delivery speed may be a determining factor in the award of the bid. In the event of a discrepancy between the part number and the description, vendors must contact the procurement officer, Kyle Kegley, for clarification prior to the deadline.

Other Leather and Allied Product Manufacturing

POSTED

about 15 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS