Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

This Government Contract opportunity from Department Of Defense was posted on September 3, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Architectural Flashing and Sheet Metal

Closed
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 238160
New
Inland Empire Job Corps-Request for Quote Roof Design & Build
Solicitation # inland-empire-job-corps-request-quote-roof-design-build
Management & Training Corporation is seeking quotes for a fixed-price design-build subcontract to construct an over-build enclosure for the lower roof of Building G at the Inland Empire Job Corps Center in San Bernardino, California. The project involves designing and installing a roof covering approximately 800 gross square feet, featuring a 3% sloped roof with a single ply, EPDM 60 mil roofing system over wood or metal decking. The scope includes structural framing that extends existing bearing walls or utilizes a new post-beam system, the installation of three LED strip light fixtures with one emergency backup, and strict adherence to OSHA safety standards and the Architectural Barriers Act Accessibility Standard of 2007. The total period of performance is 240 days, with a requirement to complete the work within 100 consecutive business days following the Notice to Proceed. Bids are due by November 2, 2026, and will be evaluated based on overall best value. This is a small business set-aside opportunity open to various SBA certifications. For bids equal to or greater than $25,000, a bid bond of 20% of the base bid is required, and the awarded contractor must provide performance and payment bonds from a surety with at least an A- rating. Bidders must conduct a physical site visit and sign an attendance roster to be eligible. The project is subject to Construction Wage Rate Requirements, necessitating compliance with California prevailing wages and the submission of weekly certified payroll reports. Additionally, all inspections and testing must be conducted by an independent, third-party agency registered in California. Required insurance minimums include 1 million dollars per occurrence for general liability, 1 million dollars for auto, and 500,000 dollars for workers compensation.
Inland Empire Job Corps

POSTED

about 4 hours ago

DEADLINE

in 6 days
NAICS: 238160
New
SLED
Internal/Concealed Gutter Installation and WaterproofingThis subcontract for Internal/Concealed Gutter Installation and Waterproofing involves the removal and installation of internal gutter systems for a three-story courthouse project in Walton County, Florida. The selected contractor will be responsible for removing existing systems, flashing, and liners, and installing new gutters, liners, flashing, and waterproofing components. To ensure the integrity of the installation, the contractor must execute controlled water-infiltration tests to deliver a fully watertight internal drainage system. Qualified bidders must hold a valid Florida CCC or CSC license. The solicitation was posted on October 27, 2026, with a response deadline of November 19, 2026. This project falls under NAICS code 238160 and is managed through the Facility Maintenance agency for the state of Florida.
Facility Maintenance

POSTED

about 15 hours ago

DEADLINE

in 22 days
NAICS: 238160
New
SLED
REPLACE THE GUTTERS AT THE DEFUNIAK COURTHOUSE
Solicitation # 05-27
Walton County is soliciting competitive quotations for the complete removal and replacement of the internal and concealed gutter system at the three-story DeFuniak Springs Courthouse in Florida. The selected contractor must provide all labor, supervision, equipment, and materials necessary to install a durable, watertight drainage system, including the removal of deteriorated flashing, sealants, and liners. Key requirements include performing a preconstruction assessment to verify dimensions, conducting a controlled water test upon completion, and ensuring all restoration materials are compatible with the existing building. The project requires a final walkthrough with the owner and a comprehensive site cleanup to return the area to its preconstruction condition. Qualified respondents must hold a valid Florida contractor license, such as a Certified General, Building, Roofing, or Sheet Metal Contractor license. Submissions must include a total lump-sum base quotation with an itemized breakdown, a proposed project schedule detailing mobilization and duration, warranty information for both workmanship and materials, and two professional references. The deadline for responses is November 19, 2026, at 12:00 pm, with all submissions and clarifications handled through the OpenGov Procurement portal. Award consideration will be based on price and the ability to meet technical and administrative requirements.
Facility Maintenance

POSTED

about 15 hours ago

DEADLINE

in 22 days
NAICS: 238160
New
SLED
Roofing Contractor (EPDM)This subcontract opportunity is for a Roofing Contractor to install a comprehensive elastomeric EPDM membrane roofing system at the Harbor Police Headquarters facility in San Diego. Working under prime contractors for the San Diego Unified Port District, the selected provider will be responsible for delivering a fully waterproof system. The scope of work includes the installation of adhered conventional EPDM membranes, flat and tapered insulation, vapor barriers, substrate boards, roofing stack boots, expansion joints, and walkway pads. The solicitation was posted on October 27, 2026, with a response deadline of December 9, 2026. This project falls under NAICS code 238160 and is specifically focused on the technical execution of a high-performance roofing stack to ensure the long-term integrity of the government facility.
San Diego Unified Port District

POSTED

about 17 hours ago

DEADLINE

in about 1 month
NAICS: 238160
New
SLED
Sheet Metal and Flashing SpecialistThis subcontract opportunity with the San Diego Unified Port District involves the fabrication and installation of sheet metal flashing and trim for the Harbor Police Headquarters facility projects. The selected specialist will be responsible for delivering complete waterproof flashing systems, including flexible flashing, perimeter and penetration flashings for roofing and siding, and masonry flashing at foundation walls. The project is located in San Diego and falls under NAICS code 238160. Interested parties must submit their responses by the deadline of December 9, 2026.
San Diego Unified Port District

POSTED

about 17 hours ago

DEADLINE

in about 1 month
NAICS: 238160
New
International
Residential Roofing Repair and MaintenanceThis subcontract agreement involves the provision of repair, upgrade, and maintenance services for roofing systems on residential property projects managed by Ipswich Borough Council. The selected contractor will work under prime contractors to execute specialized construction tasks using materials such as roofing membranes, tiles, slates, and flashing. All work must be performed in accordance with UK building regulations to ensure the delivery of weather-tight and fully functional roofing systems. The opportunity was posted on October 27, 2026, with a response deadline of November 25, 2026. Classified under NAICS code 238160 and CPV 45260000, the contract focuses on essential residential infrastructure improvements within the jurisdiction of the Ipswich Borough Council.
Ipswich Borough Council

POSTED

about 18 hours ago

DEADLINE

in 28 days
NAICS: 238160
New
SLED
Building Envelope and FinishesThis subcontract opportunity involves performing building envelope repairs and interior finish work for prime contractors on projects managed by the Houston County Board of Commissioners in Georgia. The scope of work includes the installation of unit masonry, joint sealers, penetration firestopping, door hardware, and glazing, as well as interior painting. All deliverables must be completed in accordance with the provided project specifications. The solicitation is categorized under NAICS code 238160 and was posted on October 27, 2026. Interested parties must submit their responses by the deadline of December 10, 2026. Further details regarding the event can be accessed through the Georgia Department of Administrative Services portal.
Houston County Board of Commissioners

POSTED

about 18 hours ago

DEADLINE

in about 1 month
NAICS: 238160
New
SLED
EPDM Roofing System (Supply & Install)This subcontract opportunity involves the supply and installation of mechanically-fastened EPDM roofing systems for the Bradley Academy Museum exterior renovation projects. The selected contractor will be responsible for installing EPDM membranes along with all necessary flashing and accessories over prepared substrates, ensuring the final delivery of a fully waterproof roofing system that adheres to all standard roofing codes. Managed by the Tennessee Parks and Recreation agency under NAICS code 238160, the project was posted on October 27, 2026. Interested parties must submit their responses by the deadline of November 17, 2026.
Parks and Recreation

POSTED

about 19 hours ago

DEADLINE

in 20 days
NAICS: 238160
New
SLED
Liquid Applied Membrane SpecialistThis subcontract opportunity is for a Liquid Applied Membrane Specialist to provide waterproofing and sealing services for prime contractors on Glendale Unified School District facility projects in Glendale, California. The selected contractor will be responsible for applying liquid-applied membranes to designated roof areas and penetrations according to project drawings to ensure complete watertight integrity. To qualify for this role, contractors must hold a valid CSLB license and provide the necessary manufacturer installation certifications. Interested parties must submit their responses by November 18, 2026.
Glendale Unified School District

POSTED

about 20 hours ago

DEADLINE

in 21 days
NAICS: 238160
New
SLED
Modified Bituminous Membrane Roofing InstallerThis subcontract opportunity is for a Modified Bituminous Membrane Roofing Installer to perform work on Glendale Unified School District facility projects in Glendale, California. The selected contractor will be responsible for installing Cold Applied 2-Ply Thermoplastic Hybrid Roof Systems, which includes the removal of existing membranes and insulation, filling low spots, installing wood nailers, and applying KEE-Stone HP membranes and flashings in accordance with NRCA manuals. Additional requirements include the installation of metal pans and 8 inch equipment pads to ensure a completely watertight roof. To qualify for this project, contractors must possess a valid CSLB license and undergo criminal background fingerprinting. The final delivery must include both a manufacturer warranty and a 5-year installer warranty. Interested parties must submit their responses by the deadline of November 18, 2026.
Glendale Unified School District

POSTED

about 20 hours ago

DEADLINE

in 21 days
NAICS: 238160
New
SLED
Roofing Improvements Project At Multiple Sites
Solicitation # 009-26/27
The Glendale Unified School District is soliciting bids for a Roofing Improvements Project at multiple sites in Glendale, California, under solicitation number 009-26/27. The project involves the demolition and installation of new roofing systems across various locations, including Balboa, John Marshall, and Thomas Edison Elementary Schools, as well as La Crescenta Elementary School. The contract will be awarded to the lowest responsive responsible bidder. Engineering estimates for the work range from approximately 653,969 dollars for La Crescenta Elementary to over 2 million dollars for Thomas Edison Elementary. The successful contractor must provide all labor, materials, and equipment, adhering to NRCA Roofing and Waterproofing Manual standards and manufacturer specifications. Key requirements include the provision of 100 percent performance and payment bonds, compliance with California prevailing wage laws, and adherence to a three percent participation goal for Disabled Veteran Business Enterprises. Bidders must submit detailed escrow bid documentation and certify compliance with various regulations, including the Iran Contracting Act and Education Code fingerprinting requirements. Final acceptance is contingent upon manufacturer inspection and the issuance of a warranty.
Glendale Unified School District

POSTED

about 20 hours ago

DEADLINE

in 21 days
NAICS: 238160
New
SLED
Sheet Metal Flashing, Trim, and GuttersThis subcontract opportunity involves the fabrication, supply, and installation of sheet metal flashing, trim, and gutter systems for facility projects managed by prime contractors for the City of Bloomington. The scope of work specifically includes the installation of stainless steel edge and cap flashings, as well as the installation of manufactured gutters and downspouts to ensure proper rainwater drainage. The project falls under NAICS code 238160 and is associated with the Water agency in Illinois. Interested parties must submit their responses by the deadline of November 24, 2026, at 4:00 PM.
Water

POSTED

about 21 hours ago

DEADLINE

in 27 days

AI Contract Overview

Show more

This subcontract opportunity with the Department of Defense involves the fabrication and installation of architectural sheet metal and flashing for prime contractors at the US Army Rock Island Arsenal facility. The scope of work includes applying solder metal and installing aluminum alloy sheets, plates, and extruded profiles, ensuring all deliverables meet SMACNA 1793 and ASTM B32, B209, and B221 standards. The project is designated as a total Small Business Set Aside under NAICS code 238160. Interested parties must submit their responses by September 11, 2026, for performance in Rock Island, Illinois.

General Info

DoD subcontract for architectural sheet metal installation at Rock Island Arsenal by September 2026.

Agency

Department Of Defense → W6QK Acc-Ri

NAICS

238160 - Roofing Contractors

Place of Performance

Rock Island, IL, 61299, USA

Set-Aside

SBA

Documents

This scope was carved out of W519TC-26-R-A067.

The full solicitation package (26 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Building 333 - Roof Repair

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W6QK Acc-Ri
ContactsNo contacts available
OfficeN/A
Organization / AgencyDepartment Of Defense → W6QK Acc-Ri
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Supplies and installs flashing and sheet metal components for prime contractors on US Army Rock Island Arsenal facility projects. Fabricates and installs architectural sheet metal, applies solder metal, and installs aluminum-alloy sheets, plates, and extruded profiles per SMACNA 1793 and ASTM B32, B209, and B221 standards. Delivers installed roof flashing and sheet metal trim.

More opportunities from Department Of Defense → W6QK Acc-Ri

Same awarding agency

NAICS: 333994
New
Federal
Deep Pit Furnace
Solicitation # W519TC-27-Q-A019
Industrial Process Furnace and Oven Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 21 days
View Details
NAICS: 325920
New
Federal
Request for Information - Energetics Center of Excellence
Solicitation # W519TC-26-R-0019
Army Contracting Command-Rock Island is conducting market research through a Sources Sought notice to establish an Energetics Center of Excellence at Blue Grass Army Depot in Richmond, Kentucky. The initiative aims to strengthen the Department of War energetics ecosystem and the Defense Industrial Base by addressing constraints such as aging infrastructure, fragile supply chains, and limited domestic capacity. The government is seeking industry input on transformative, scalable, and commercially sustainable solutions to onshore production, reduce foreign dependencies, and modernize manufacturing processes for current explosives like RDX and HMX, as well as next-generation formulations. The government is interested in a Public-Private Partnership model where facilities are commercially viable and do not rely on recurring government funding for steady-state operations. Proposed solutions must be located at Blue Grass Army Depot and achieve full transition and commissioning within 48 months. While this is currently a request for information, the government has indicated a potential intent to award a non-competitive, sole-source Undefinitized Contract Action with a Firm-Fixed-Price ceiling. Responses must include a technical approach, a rough order of magnitude cost estimate, and a sustainable business model, with a submission deadline of November 2, 2026.
Explosives Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 6 days
View Details
NAICS: 541380
New
Federal
Granite Surface Plate Calibration and lapping - with Q&As
Solicitation # W519TC27QA007
Solicitation W519TC27QA007, issued by the Army Contracting Command - Rock Island, seeks an ISO 17025 accredited vendor to provide annual inspection, calibration, and lapping repair for granite surface plates at the Rock Island Arsenal Joint Manufacturing and Technology Center. The requirement is structured as a firm-fixed-price contract consisting of a base year from February 2, 2027, to February 1, 2028, with four subsequent option years, for a total potential duration of five years and six months. All work must be performed in accordance with ASME B89.3.7 and ANSI Z-540-1 standards, with calibrations traceable to NIST. The contract utilizes a hybrid pricing model where the annual inspection and calibration of all plates are firm-fixed-price lots, while lapping repairs are priced separately via an hourly labor rate and must be authorized by the Contracting Officer or COR. Estimated travel costs should be included in the firm-fixed pricing, though actual costs will be billed after service per Joint Travel Regulation rates. Deliverables include calibration stickers for each plate and a Service Acceptance Report submitted within three business days of completion. Offerors must submit their proposals by November 9, 2026, including a signed concurrence of the Scope of Work and documentation of their technical capabilities.
Testing Laboratories and Services

POSTED

about 22 hours ago

DEADLINE

in 12 days
View Details
NAICS: 326199
New
Federal
DRS M7A1 HDPE PLATFORM
Solicitation # W519TC27QA026
Solicitation W519TC27QA026, issued by the Army Contracting Command - Rock Island, is a firm fixed price procurement for DRS M7A1 High Density Polyethylene (HDPE) Platforms to support the Rock Island Arsenal, Joint Manufacturing and Technology Center. This small business set-aside under NAICS 326199 requires the production of various components, including Acetylene Tank Pads and two types of countertops, all manufactured from 1 inch solid HDPE. All parts must strictly adhere to technical drawings 1110701005, 1110701017, and 1110701018, with quality assurance standards referencing AS9100 certification and ASME Y14.1-2007 and Y14.5-2009. The contract mandates that all deliverables be shipped FOB Destination to Rock Island, Illinois, by December 21, 2026. Award will be based on the lowest total evaluated priced quote from a responsible offeror who conforms to all RFQ requirements, including Buy American Act compliance and the provision of a Certificate of Conformance with every delivery. Payment will be processed electronically via the Wide Area Workflow system. Quotes must be submitted by October 30, 2026, and must include the country of origin for each contract line item.
All Other Plastics Product Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 2 days
View Details
NAICS: 326199
New
Federal
Fabrication and Supply of HDPE CountertopsThis small business set-aside subcontract involves the fabrication and supply of manufactured High Density Polyethylene countertops for prime contractors working on Army Contracting Command - Rock Island projects. The selected provider must utilize precision plastic fabrication equipment to produce surfaces that strictly adhere to Drawing 1110701018. The contract requires full compliance with the Buy American Act and the provision of a Certificate of Conformance. All delivered countertops must include a one-year warranty. This opportunity is managed under the Department of Defense with a specific focus on NAICS code 326199.
All Other Plastics Product Manufacturing

POSTED

2 days ago

DEADLINE

in 2 days
View Details
NAICS: 326199
New
Federal
Fabrication and Supply of HDPE Acetylene Tank PadsThis small business set-aside subcontract involves the fabrication and supply of 14 High Density Polyethylene HDPE Acetylene Tank Pads for prime contractors working on Army Contracting Command Rock Island projects. The contractor is responsible for manufacturing the platforms according to Drawing 1110701005 using precision milling and cutting equipment, ensuring all deliverables include a one-year warranty. Compliance is a critical component of the agreement, requiring strict adherence to the Buy American Act and the provision of a Certificate of Conformance. The project falls under NAICS code 326199 and is managed through the Department of Defense.
All Other Plastics Product Manufacturing

POSTED

2 days ago

DEADLINE

in 2 days
View Details
NAICS: 313113
New
Federal
Supply of Go/No-Go Thread Plug GagesThis small business set-aside subcontract involves the supply of precision-engineered Go and No-Go thread plug gages, specifically models SBG-625 and SBG-626, for prime contractors working on Army Contracting Command - Rock Island projects. The work supports the Rock Island Arsenal - Joint Manufacturing and Technology Center and requires the manufacture or sourcing of gages using high-grade tool steel and precision machining. The scope of work includes the delivery of calibrated gages along with necessary certification of accuracy based on provided technical drawings. This Department of Defense requirement is categorized under NAICS code 313113 and will be performed in Rock Island, Illinois.
Thread Mills

POSTED

2 days ago

DEADLINE

in 12 days
View Details
NAICS: 333515
New
Federal
Go/No-Go Thread Gages (SBG-625 & SBG-626)
Solicitation # W519TC-27-Q-A028
The Army Contracting Command - Rock Island (ACC-RI) is soliciting quotes for the procurement of Go/No-Go Thread Gages, specifically Go Thread Plug SBG-625 and No-Go Thread Plug SBG-626, to support the Rock Island Arsenal - Joint Manufacturing and Technology Center. This is a 100% Small Business Set-Aside under NAICS code 333515 for Cutting Tool and Machine Tool Accessory Manufacturing. The government intends to award a single Firm Fixed Price purchase order to the responsible offeror with the lowest Total Evaluated Price. All deliverables must be provided by December 28, 2026, with delivery terms set as FOB Destination to the Rock Island, Illinois facility. Because the requirements are based on drawings considered Controlled Technical Data, prospective contractors must have an approved DD Form 2345 on file with the Joint Certification Program to access the necessary technical specifications. The contract includes stringent shipping and marking requirements, including compliance with MIL-STD-129 and the use of two-dimensional data matrix symbology for unique item identification. Invoicing and payment will be processed through the Wide Area WorkFlow (WAWF) system. The solicitation is governed by FAR Part 12 for the acquisition of commercial products and incorporates various security and safeguarding clauses, including NIST SP 800-171 assessment requirements and prohibitions relating to Chinese military companies.
Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

2 days ago

DEADLINE

in 12 days
View Details
NAICS: 541380
New
Federal
TEAD - Helium Inspection Services
Solicitation # PANROC26P0000036026
Solicitation PANROC26P0000036026 is a 100% Small Business Set Aside for certified Non-Destructive Testing (NDT) services to perform helium leak inspections on newly fabricated one-metric ton mercury containers. The work will be performed on-site at Building 519 of the Tooele Army Depot in Tooele, Utah. The requirement consists of a Firm Fixed Price commercial order for 100 standard inspections and a variable quantity CLIN for 10 retests of failed units. The requested period of performance is from January 1, 2027, to December 31, 2027, with a general contract duration of 365 calendar days from the date of award. Technical requirements specify that containers must meet strict pressure-hold and leak-detection thresholds, including a maximum pressure decrease of 0.1 psi during initial and 30-minute hold periods and a corrected helium leak rate of less than 1.0E-5 std cm3/sec. Personnel must hold ASNT Level II or III certifications and may require active security clearances in DISS and NBIS. Award will be granted to the responsible quoter submitting the lowest total evaluated price conforming to specifications, with technical and past performance factors not being evaluated. Quotes must be submitted via the provided Pricing Matrix and remain valid for 60 days.
Testing Laboratories and Services

POSTED

2 days ago

DEADLINE

in 13 days
View Details
NAICS: 314994
New
Federal
Lifting Pull Strap
Solicitation # W519TC27
Army Contracting Command - Rock Island issued solicitation W519TC27RA006 for a five-year, Firm Fixed Price, Indefinite Delivery Indefinite Quantity contract to manufacture and deliver Lifting Pull Straps. These straps are critical components for the assembly, packaging, and depot operations of M929 Smoke WP, M930 Visible Light Illumination, and M983 Infrared Illumination cartridges supporting 120mm mortar production lines at Pine Bluff Arsenal in Arkansas. The contract is a Total Small Business Set Aside under NAICS code 314994, with a guaranteed minimum of 8,000 to 13,500 units and a maximum ceiling of 59,500 units. All products must conform to Drawing 12577572 Rev K, MIL-DTL-4088L for woven nylon webbing, and ASTM D6193 for stitches and seams. Award will be made using the Lowest Price Technically Acceptable process, evaluating offerors on experience, manufacturing plans, quality control, and delivery schedules. A key requirement is the delivery of a First Article Testing lot of 15 units to Pine Bluff Arsenal within 60 calendar days of contract award. The period of performance is divided into five annual ordering periods, with initial production deliveries due 120 days after a delivery order is executed. Contractors must adhere to strict security protocols for accessing the Technical Data Package, including US/Canada Joint Certification and the submission of a Non-Disclosure Agreement. Invoicing is processed electronically via the Wide Area WorkFlow system.
Rope, Cordage, Twine, Tire Cord, and Tire Fabric Mills

POSTED

6 days ago

DEADLINE

in 26 days
View Details
NAICS: 561210
New
Federal
Telecommunications Fiber Optic Upgrades at Iowa Army Ammunition Plant
Solicitation # W519TC-27-R-IA03
The US Army Contracting Command - Rock Island requires telecommunications fiber optic upgrades at the Iowa Army Ammunition Plant in Middletown, Iowa. This action, referenced as W519TC-27-R-IA03, will be executed as a task order under Basic Ordering Agreement W52PIJ-09-G-0001, which remains active through 2033. The government anticipates awarding the contract to American Ordnance LLC, the current Operating Contractor at the facility, utilizing the Government Property Clause Far 52.245-1. This notification is intended for subcontracting purposes only and does not constitute a formal Request for Proposal or a binding commitment from the U.S. Government. Interested parties should direct all inquiries in writing to the primary point of contact, Derek Rooks. The solicitation is categorized under NAICS code 561210, with a response deadline set for December 10, 2026.
Facilities Support Services

POSTED

6 days ago

DEADLINE

in about 1 month
View Details
NAICS: 325920
New
Federal
Thin Layer Explosives (TLX)
Solicitation # W519TC26RA057
Solicitation W519TC26RA057 is a restricted Request for Proposal for a single Firm Fixed Price award to procure Thin Layer Explosive (TLX) and Detonating Cord Assembly (DCA) across multiple DODICS, including JL97, JL98, MU73, MU94, SS97, SS98, and SS99. Managed by the Department of Defense through ACC-RI, the contract requires the delivery of hardware, Lot Acceptance Testing (LAT), and various CDRLs within a base period of 24 months. To be eligible, offerors must provide a valid Qualification Acceptance Letter signed by an authorized Government engineer. Evaluation is based on a trade-off where technical factors, including the proposed project plan and delivery schedule, combined with past performance and small business participation, are significantly more important than price. The contract mandates strict adherence to technical standards, including MIL-STD-130 and MIL-STD-1168 for item marking and Ammunition Data Card (ADC) preparation. Unique Identification (UID) marking is mandatory for investigative units, and all organic materials must be fully traceable to the original equipment manufacturer. Contractors are required to submit a test plan within 60 days of award and must utilize the Wide Area Work Flow Receipt and Acceptance (WAWF-RR) system for invoicing and shipping reports. Compliance with cybersecurity standards, including CMMC and DFARS 252.204-7012, is required to safeguard covered defense information.
Explosives Manufacturing

POSTED

6 days ago

DEADLINE

in about 1 month
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 238160
Closed
Federal
Potable Water Certified Coating Application
248-NETWORK Contract Office 8 (36C248)

POSTED

about 2 months ago

CLOSED

about 1 month ago
View Details
NAICS: 238160
Closed
Federal
Marine Coating and Preservation Services
Puget Sound Naval Shipyard IMF

POSTED

about 2 months ago

CLOSED

23 days ago
View Details
NAICS: 238160
Closed
Federal
Roofing and Skylight Installation
W7MX Uspfo Activity Caang 163

POSTED

about 2 months ago

CLOSED

about 1 month ago
View Details
NAICS: 238160
Closed
Federal
Commissioning Agent (Exterior Closure)
260-NETWORK Contract Office 20 (36C260)

POSTED

about 2 months ago

CLOSED

about 2 months ago
View Details
NAICS: 238160
Closed
Federal
Roof Specialties Supplier/Installer
260-NETWORK Contract Office 20 (36C260)

POSTED

about 2 months ago

CLOSED

about 2 months ago
View Details
NAICS: 238160
Closed
Federal
Roof Insulation Supplier & Installer
260-NETWORK Contract Office 20 (36C260)

POSTED

about 2 months ago

CLOSED

about 2 months ago
View Details
NAICS: 238160
Closed
Federal
TPO Roofing Installer
260-NETWORK Contract Office 20 (36C260)

POSTED

about 2 months ago

CLOSED

about 2 months ago
View Details
NAICS: 238160
Closed
Federal
Roof Demolition and Preparation
Fletc Charleston Procurement Office

POSTED

about 2 months ago

CLOSED

about 2 months ago
View Details
NAICS: 238160
Closed
Federal
Metal Roof Panels (Specialty Supply/Install)
Fletc Charleston Procurement Office

POSTED

about 2 months ago

CLOSED

about 2 months ago
View Details
NAICS: 238160
Closed
Federal
Roof Specialties and Access
Fletc Charleston Procurement Office

POSTED

about 2 months ago

CLOSED

about 2 months ago
View Details
NAICS: 238160
Closed
Federal
Sheet Metal Flashing and Trim
Fletc Charleston Procurement Office

POSTED

about 2 months ago

CLOSED

about 2 months ago
View Details
NAICS: 238160
Closed
Federal
SBS Modified Bituminous Membrane Roofing
Fletc Charleston Procurement Office

POSTED

about 2 months ago

CLOSED

about 2 months ago
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS