Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

ARM ASSEMBLY, PIVOT, TRA

Active
SPE7LX-26-U-9303Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract pertains to the procurement of 459 units of ARM ASSEMBLY, PIVOT, TRACK SUSPENSION with NSN 2530-01-356-4613 under solicitation SPE7LX-26-U-9303, issued by the Defense Logistics Agency through a Total Small Business Set-Aside. The delivery deadline is set at 75 days after award, and the solicitation closed on August 20, 2026, with a posting date of August 5, 2026. Technical and quality requirements referenced in the document are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date depending on acquisition size. CMMC Level 2 certification is required for third-party assessment organizations involved, and compliance with DLA packaging standards for procurement is mandatory. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitutes must be pre-approved unless explicitly permitted by specification. Technical data associated with this item is subject to export controls under ITAR or EAR, restricting dissemination to foreign persons regardless of location and requiring compliance with DFARS 252.225-7048. Access to controlled data is limited to contractors with approved US/Canada Joint Certification Program status, completion of mandatory DLA training, and formal authorization from DLA. The Point of Contact for this solicitation is Theodore Misiolek, reachable via email and phone as listed.

General Info

459 pivot track suspension units procured under small business set-aside, delivery in 75 days, CMMC Level 2 and ITAR/EAR compliance required.

Agency

Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATEView Agency

NAICS

336330 - Motor Vehicle Steering and Suspension Components (except Spring) ManufacturingView NAICS

Place of Performance

US

Set-Aside

SBA

Documents

(1)

SPE7LX-26-U-9303.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE
View Agency Profile
Office AddressUS
Contacts
Theodore Misiolek
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
ARM ASSEMBLY,PIVOT,TRACK SUSPENSION
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) ARM ASSEMBLY, PIVOT. RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 2530-01-356-4613 Quantity: 459 EA Purchase Request: 1000239147QTY: 459 Delivery: 75 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336330
New
DIBBS
PARTS KIT, BRAKE SHOE
Solicitation # SPE7LX-26-U-9298
This contract covers the procurement of a Parts Kit, Brake Shoe under solicitation number SPE7LX-26-U-9298, with a national stock number of 2530-01-686-1627 and a required quantity of 242 units, each priced individually for a total estimated value based on unit cost. The delivery must be completed within 79 days, with shipment terms defined as FOB origin, and no variance is permitted in the quantity—neither plus nor minus zero percent. Inspection and acceptance of the goods occur at the destination, and packaging must comply strictly with MIL-STD-2073-1E Appendix D for kits, alongside MIL-STD-129 for marking. All preservation and packaging materials must be free of mercury or mercury compounds, and palletization must adhere to DLA’s Packaging Requirements for Procurement outlined in RP001. The contract references the DLA Master List of Technical and Quality Requirements, incorporating all R and I numbered specifications that apply to the item’s technical and quality standards. The contractor, identified as either DETROIT DEFENSE, INC. or DETROIT DEFENSE SYSTEMS, LLC, must supply the kit under DLA Direct, CONUS coverage, and the item is subject to federal acquisition rules. The solicitation was posted on August 5, 2026, with responses due by August 20, 2026, and is classified under NAICS code 336330 for automotive parts manufacturing. The point of contact for inquiries is Theodore Misiolek of the Strategic Acquisition Program Directorate within the Department of Defense, reachable via phone and email provided. All documentation must align with DoD unit of issue standards, and no special marking is required beyond standard military labeling. The contract is issued for a simplified acquisition, meaning the version of the DLA Master List in effect on the solicitation’s issue date governs all technical and quality requirements.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details
NAICS: 336330
New
DIBBS
ARM, STEERING GEAR
Solicitation # SPE7L1-26-T-912U
The contract pertains to the procurement of a right-hand tie rod end for a steering gear, identified by NSN 2530012889854 and part number SW25198-2, with a total quantity of three units, each priced at one dollar, delivered under a single solicitation number SPE7L1-26-T-912U. Delivery is required within ten days to the specified destination in Brundidge, Alabama, with FOB origin terms, zero quantity variance allowed, and inspection and acceptance taking place upon arrival. All packaging must comply strictly with DLA Packaging Requirements for Procurement RP001 and MIL-STD-129 labeling standards, and material must be packaged per ASTM D3951 unless classified as hazardous under FED-STD-313, in which case TQ requirement IP025 applies, with all DLA Master List technical and quality requirements taking precedence over commercial standards. Shipment must be sent via the fastest traceable means excluding parcel post, and all packaging must be palletized according to specified guidelines. Each unit must be marked with the assigned military freight number and project identifier, and delivery is due no later than July 31, 2026. The contract is issued by the Department of Defense’s Land Supply Chain under a federal solicitation classified under NAICS code 336330, with the point of contact listed as Kristina Derry. The supplier, DRS Sustainment Systems, Inc., is required to adhere to all DLA technical and quality mandates referenced through R and I numbers in the DLA Master List of Technical and Quality Requirements, accessible via the DLA website. The same delivery address, mark-for information, and shipment tracking details apply to all three line items, which are distinguishable only by their purchase request numbers: 7017727249, 7017727248, and 7017727250. Government-specific identifiers and logistics codes are included for internal tracking, and the contract explicitly prohibits the use of non-traceable shipping methods. All documentation, labeling, and packaging must reflect the approved unit of issue and quantity per unit pack as defined in the contract, with full compliance mandated for acceptance.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 336330
New
Federal
INSTALLATION KIT, VEHICLE COMPONENTS
Solicitation # 7017134290
DLA Land and Maritime is seeking sources for a one-time purchase of 138 Installation Kits, Vehicle Components, identified by NSN 2530-016603400, with the approved manufacturer being OSHKOSH DEFENSE LLC under part number 4341939. The agency currently lacks technical data for this item and is soliciting potential suppliers to submit information through DLA Procurement Notes L04 and M06 to qualify as an approved source. Interested parties must complete and return a Market Survey to Jennifer Cummins at JENNIFER.CUMMINS@DLA.MIL to be considered for the solicitation. The solicitation, numbered 7017134290, was posted on August 4, 2026, with a response deadline of August 11, 2026, at 7:00 PM Eastern Time. The action falls under NAICS code 336330 and is managed by the Department of Defense through the DLA Land and Maritime office located in Columbus, Ohio. No set-aside designation applies to this opportunity.
DLA Land And Maritime

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 336330
New
DIBBS
Steering Tie Rod End ManufacturingThe contract entails the manufacturing of precision steering tie rod ends to meet military and Defense Logistics Agency specifications, requiring strict adherence to quality control protocols, performance testing, and material compliance standards that prohibit certain restricted substances. All products must be produced using approved methodologies and undergo rigorous inspection to ensure they fulfill the mechanical, dimensional, and safety requirements mandated for defense-grade automotive components. The work is subject to full traceability and documentation throughout the production lifecycle to maintain accountability and regulatory alignment. Performance of the contract is centered at New Cumberland, Pennsylvania, with a response deadline of August 14, 2026, and the solicitation was posted on August 3, 2026. This is a subcontract opportunity classified under NAICS code 336330 for Automotive Steering and Suspension Components. The contracting activity falls under the Department of Defense’s Land Supplier Operations Vehicle Support organization, indicating the end-use is in military vehicle systems. Compliance with all federal acquisition and defense supply chain directives is mandatory, including any applicable export controls, reporting obligations, and quality assurance programs tied to government-contracted manufacturing.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 336330
New
DIBBS
Steering Wheel Manufacturing & SupplyThe contract solicits the manufacture and supply of military-specification steering wheels designated by NSN 2530011647954, adhering strictly to Defense Logistics Agency technical, packaging, and preservation standards to ensure full compliance with defense procurement requirements. The requirement is set aside exclusively for Service-Disabled Veteran-Owned Small Businesses, with the North American Industry Classification System code 336330 indicating the focus on motor vehicle parts manufacturing. The solicitation, issued by the Strategic Acquisition Program Directorate under the Department of Defense, requires submissions by August 18, 2026, and is structured as a subcontract opportunity. All deliverables must meet exacting military-grade performance and durability criteria, with strict adherence to specification details governing materials, finish, testing, and packaging protocols to support seamless integration into defense vehicles. The contract will be awarded based on technical compliance, capability to meet delivery schedules, and full qualification as a service-disabled veteran-owned small business.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

2 days ago

DEADLINE

in 13 days
View Details
NAICS: 336330
New
DIBBS
ARM, CONTROL, VEHICUL
Solicitation # SPE7L3-26-T-125T
The contract solicitation for ARM, CONTROL, VEHICUL under NSN 2530-01-676-4149, quantity 5 units, requires delivery to DLA Distribution Jacksonville, Florida, with a 168-day after date of award timeline, targeting a delivery date of March 12, 2027, under FOB Origin terms. The solicitation number is SPE7L3-26-T-125T, with responses due by August 6, 2026, and is issued by the Department of Defense under Land Supplier Opns Vehicle Spt. The contractor must be a CMMC Level 2 Certified Third-Party Assessment Organization, a mandatory and highly specialized requirement not typically found in standard procurements. Technical data associated with the item is subject to ITAR or EAR export controls, restricting disclosure to foreign persons and requiring prior authorization from the Department of State or Commerce; only contractors with approved US/Canada Joint Certification Program status, completed DLA export training, and DLA authorization may access the data. The item must be packaged, preserved, and marked in strict compliance with MIL-STD-2073-1E and SPI AK16764149 Revision A, which prohibit mercury compounds and require adherence to hazardous material labeling under 29 CFR 1910.1200 and MIL-STD-129. Inspection and acceptance occur at origin, with quality systems required to meet SAE AS9003 or ISO 9001 tailored to SAE AS9003 standards. Contractors must safeguard covered defense information as defined in DFARS 252.204-7012, report cyber incidents promptly, and provide forensic data upon request. Additional obligations include compliance with DFARS 252.240-7997 and NIST SP 800-171 assessment requirements, flow-down of hazardous materials clauses to subcontracts exceeding the simplified acquisition threshold, notification of employee whistleblower rights, and strict limitations on the use of foreign-flag vessels for ocean transportation requiring 45-day advanced notice. Invoicing must be processed through Wide Area WorkFlow, with no pricing details available in the solicitation. Offerors must possess a valid UEI and CAGE code, may represent small business status, and must comply with all DLA-specific technical and quality requirements referenced from the DLA Master List.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

2 days ago

DEADLINE

in about 22 hours
View Details
NAICS: 336330
New
DIBBS
CONTROL PARTS ASSEM
Solicitation # SPE7L4-26-T-5804
The contract involves the procurement of CONTROL PARTS ASSEM under solicitation SPE7L4-26-T-5804, with a delivery requirement of six units to be shipped FOB ORIGIN to the DLA Distribution DDSP New Cumberland Facility in New Cumberland, PA, with a delivery window of 168 days from the award date and a final need ship date of January 19, 2027. All items must comply with technical and quality specifications referenced by R and I numbers from the DLA Master List of Technical and Quality Requirements, and Class I ozone-depleting chemicals are strictly prohibited. Packaging must conform to MIL-STD-2073-1E and DLA Packaging Requirements (RP001), including palletization, preservation using method 33 with corrosion preventive compound 89, gas barrier film wrap, and joint cushioning, all in a unit pack coded U with metal outer packaging. Marking must comply with MIL-STD-129, including NSN 2530016581698 and contract number, with no special marking required beyond standard shipping labels. Inspection and acceptance occur at the destination point, governed by FAR 52.246-2 and other applicable military standards. The contract mandates electronic invoicing via WAWF and requires adherence to hazardous materials handling protocols, including proper labeling, safety data sheets, and compliance with prohibitions on hexavalent chromium and toxic substance disposal. Contractors must affirm representations regarding small business status, employment eligibility, combating trafficking in persons, and avoidance of covered telecommunications equipment from Communist Chinese military companies, with all subcontracting subject to commercial product provisions under FAR 52.244-6. Compliance with NIST SP 800-171 for information safeguarding and cybersecurity requirements is enforced, and the contract prohibits unauthorized obligations while requiring accelerated payments to small business subcontractors. The NAICS code is 336330, and the solicitation response deadline was August 6, 2026, with award administered by the Department of Defense’s LSO Combat Vehicles and Armament office.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

2 days ago

DEADLINE

in about 22 hours
View Details
NAICS: 336330
New
DIBBS
TIE ROD END, STEERIN
Solicitation # SPE7L3-26-T-145S
The contract calls for the procurement of 16 tie rod end steering components with NSN 2530016443342 and part number 145011044ENP20 from Meritor Industrial Products, LLC, under solicitation SPE7L3-26-T-145S, with a total contract value of $256.00 at a unit price of $16.00. Delivery is required within 94 days of the actual delivery order, with the original delivery date set for April 28, 2027, and a need ship date of November 17, 2026. All items must be shipped FOB origin to the designated destination at the DLA Distribution facility in New Cumberland, Pennsylvania. The quantity variance is strictly zero percent, meaning no overages or shortages are permitted. Inspection and acceptance occur at the destination, requiring exact compliance with all technical and packaging standards prior to delivery. The tie rod ends must be individually packaged with non-corrosive plastic caps over rubber boots, using die-cut JC cushioning material to immobilize the component and prevent damage during transit. Packaging must comply with MIL-STD-2073-1E, with preservation method 33 and preservation material ZZ, ensuring all bare metal is corrosion-protected and moving parts properly lubricated. Use of ozone-depleting chemicals and mercury or mercury compounds is strictly prohibited in manufacturing, preservation, packaging, and marking. Marking must adhere to MIL-STD-129, including 2D Data Matrix barcodes, NSN, contract number, and special markings “02 ARROW UP” and “OPEN THIS SIDE.” Corrugated fiberboard blocking and bracing must meet ASTM-D4727 Class Weather Resistant standards, and palletization must follow RP001 DLA Packaging Requirements. The contractor must submit Safety Data Sheets for any hazardous materials and ensure compliance with all DLA Master List of Technical and Quality Requirements referenced via R and I numbers. Cybersecurity obligations require adherence to NIST SP 800-171, with full implementation of safeguarding controls for covered defense information. Invoicing must be submitted exclusively through Wide Area WorkFlow, and the contractor must maintain current registration in the System for Award Management. Contract clauses include FAR and DFARS provisions covering equal opportunity, trafficking in persons, cybersecurity, subcontracting, changes, and payment acceleration for small
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 336330
New
DIBBS
BRAKE DRUM
Solicitation # SPE7L3-26-T-145W
The contract specifies the procurement of 10 brake drums identified by NSN 2530-01-616-5194 and part number 2501597C1 under solicitation SPE7L3-26-T-145W, with a total price of $10.00 per unit and a required delivery within 20 days from the origin point. All items must comply with DLA’s technical and quality requirements referenced in the Master List, and the use of Class I ozone-depleting chemicals is strictly prohibited, regardless of any conflicting specification language. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 standards, with specific packaging codes and methods outlined, including unit containers, intermediate packaging, and palletization as defined in DLA’s packaging directives. The goods are to be delivered FOB origin with zero variance permitted in quantity, and inspection and acceptance will occur at the origin. The freight forwarder is Serra International Inc., and the delivery destination is the Jordan Armed Forces Headquarters in Amman, Jordan, with the contract marked for government use only and associated with project TP 2. The original required delivery date is set for August 4, 2026, and the solicitation was posted on August 3, 2026, with a response deadline of August 14, 2026. The contract falls under NAICS code 336330 and is administered by the Department of Defense’s Land Supplier Operations Vehicle Support office. The Point of Contact is Lee Miller, reachable at 614-216-3422. The unit of issue is each, consistent with DoD standards and aligned with ANSI X12 equivalents. No special marking is required beyond standard MIL-STD-129 compliance, and the item must be delivered without any government identification if not accepted. The contracting authority reserves the right to use internal codes for tracking and distribution, including IPD, DIC, DIST, and ADV fields for administrative purposes.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 336330
New
DIBBS
STEERING WHEEL
Solicitation # SPE7LX-26-U-9159
This procurement is for a steering wheel designated as a critical application item with NSN 2530011647954, sourced under the indefinite delivery contract SPE7LX-26-U-9159 issued by the DLA Land and Maritime Strategic Acq Program Directorate. The solicitation is a Service-Disabled Veteran-Owned Small Business Set-Aside under NAICS code 336330, with estimated quantities of eight units and a maximum contract value of $350,000; however, the quantity is explicitly not firm and serves only as an annual estimate. Delivery must be made FOB Origin within 268 days after contract award, with all shipments confined to the continental United States, and specific delivery locations defined on individual orders. The item must conform to technical and quality requirements identified by R or I numbers from the DLA Master List of Technical and Quality Requirements, and manufacturers must use either Oshkosh Defense LLC P/N 1348910 or Morris Material Handling Inc. P/N 13Z155 as approved sources. All items must be newly manufactured; used, reconditioned, remanufactured, or surplus government items are disqualifying. Packaging and marking comply strictly with MIL-STD-2073-1E and MIL-STD-129, requiring each unit to be individually packaged with preservation material ZZ to prevent corrosion of bare metal surfaces, and container design must immobilize the item and prevent penetration or bottoming out. Palletization follows DLA’s RP001 standards. The use of Class I ozone-depleting chemicals is strictly prohibited, overriding any conflicting specification requirements, and any substitute chemicals must be pre-approved unless already authorized in the base specifications. The contract enforces compliance with multiple cybersecurity and data protection clauses including FAR 252.204-7012 and 252.240-7997, requiring adherence to NIST SP 800-171 and safeguarding covered defense information. Prohibitions extend to covered telecommunications equipment, hexavalent chromium, and Communist Chinese military company sourcing. Payment is processed via WIDE AREA WORKFLOW, with no fast pay eligibility, and offerors must maintain current SAM registrations and complete mandatory representations regarding small business status, cybersecurity, and domestic sourcing under the Buy American Act and Berry Amendment. All quotes must be submitted by August 18,
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

2 days ago

DEADLINE

in 13 days
View Details
NAICS: 336330
New
DIBBS
ADJUSTER, SLACK, BRAKE
Solicitation # SPE7LX-26-U-9202
The contract solicitation SPE7LX-26-U-9202 is for the procurement of 234 units of the adjuster, slack, brake, part number K154438 manufactured by BENDIX COMMERCIAL VEHICLE SYSTEMS LLC, with NSN 2530017326478, under a Total Small Business Set-Aside for a one-year indefinite-delivery contract. The item is specified to meet technical and quality requirements identified by R or I numbers in the DLA Master List of Technical and Quality Requirements, and the contractor must comply with stringent environmental prohibitions, including the complete exclusion of Class I ozone-depleting chemicals and hexavalent chromium, with any substitute chemicals requiring prior approval. Deliveries are to be made within 36 days of order placement, FOB Origin, with zero tolerance for quantity variance and all shipments destined for locations within the continental United States. Packaging and labeling must conform to MIL-STD-2073-1E and MIL-STD-129, with palletization adhering to DLA Packaging Requirements, ensuring compliance with hazardous material labeling requirements under OSHA’s Hazard Communication Standard and DFARS clauses. The contract incorporates a comprehensive set of Federal Acquisition Regulation and Defense Federal Acquisition Regulation Supplement clauses covering cyber security, whistleblower rights, contractor reporting obligations, export controls, prohibition of covered telecommunications equipment, and NIST SP 800-171 compliance. Quality control is performed at destination, and payment processing is mandatory through the Wide Area Workflow system, requiring the contractor to be registered in the System for Award Management and authorized to use WAWF. Offers are subject to strict pass/fail gates: no used, reconditioned, or surplus items; a minimum 90-day quote validity period; and no additive manufacturing unless explicitly authorized. Evaluation is based on the most advantageous offer considering price and other factors, and the estimated contract value is $350,000, with a guaranteed minimum of 35 units and a minimum delivery order quantity of 58 units. All submissions must be made via DIBBS by August 18, 2026, and the contracting officer is Theodore Misiolek of the DLA Land and Maritime Strategic Acquisition Program Directorate.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

2 days ago

DEADLINE

in 13 days
View Details
NAICS: 336330
New
Federal
VEHICLE LEVELING SPACERS AND SKID PLATES
Solicitation # FLT0018-26
This is a small business set-aside Request for Quotation (RFQ) under solicitation number FLT0018-26, issued as a combined synopsis and solicitation in accordance with FAR Subpart 12.2. The contract is structured as a fixed-price, indefinite-delivery/indefinite-quantity (IDIQ) agreement with a one-year base period and four optional one-year extension periods, totaling up to five years of potential performance. It is set-aside exclusively for small businesses under the Non-Manufacturer Rule, meaning non-manufacturers must supply products made by small businesses. The required items are vehicle leveling spacers and skid plates, classified under NAICS code 336330, with pricing subject to an Economic Price Adjustment tied to the Producer Price Index, though offerors may propose an alternative index if they believe it more accurate, provided they submit it at least five days before the offer deadline. All delivery must be F.O.B. destination to either the UNICOR facility in North Bastrop, Texas, or Victorville, California, with each delivery order requiring fulfillment within 60 days or sooner. Offerors must be registered in the System for Award Management (SAM) with an active Unique Entity Identifier (UEI) and must provide complete vendor information including point of contact, phone and email, and business size certification. Proposals must be submitted exclusively by email to Aaron.Mitchell2@usdoj.gov by August 7, 2026, at 2:00 p.m. EST, and must include technical descriptions of the items, warranty terms, pricing, and acknowledgment of any amendments. No physical mail is permitted. The government retains the right to request sample products before award or after contract award to verify compliance and quality. The contract may be expanded to include additional similar items from other UNICOR facilities if found within scope and priced fairly. Inspection and acceptance occur at the delivery locations, and the contracting officer is the sole point of contact for all communication, with no phone inquiries allowed. Failure to comply with any requirement, including SAM registration or timely submission, will disqualify an offer.
Inc Federal Prison Industries

POSTED

2 days ago

DEADLINE

in 2 days
View Details

More opportunities from Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE

Same awarding agency

NAICS: 332510
New
DIBBS
BRACKET, MOUNTING
Solicitation # SPE7LX-26-U-9329
The contract pertains to the procurement of a Right Hand Single Arm Mounting Bracket, identified by NSN 5340016150030 and OSHKOSH DEFENSE LLC part number 3764286, with a total quantity of 176 units. Delivery is required within 116 days under FOB Origin terms, with no variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, unit container type D3, and marking per MIL-STD-129 with no special marking codes. Packaging and palletization must adhere to DLA’s official procurement requirements, and hazardous materials handling provisions apply if relevant. The contract is issued under a Small Business Set-Aside, with the solicitation number SPE7LX-26-U-9329 and a response deadline in August 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with sampling procedures following MIL-STD-1916 or ASQ H1331, and zero non-conformances expected unless otherwise stated. Identification of U.S. military property must conform to MIL-STD-130N. The unit of issue is each, priced at $176.00 per unit, for a total estimated price of $30,976.00, though this amount is not guaranteed for full purchase by the IDC.
Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, MOUNTING
Solicitation # SPE7LX-26-U-9318
The contract pertains to the procurement of 631 units of a mounting bracket identified by NSN 5340-01-647-8723 under purchase request 1000239184. The solicitation, numbered SPE7LX-26-U-9318, was posted on August 5, 2026, with a response deadline of August 20, 2026, and requires delivery within 113 days of award. The item falls under NAICS code 332510 and is being sourced by the Department of Defense through the Strategic Acquisition Program Directorate. The contract incorporates all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation issuance or award date depending on the acquisition size. Government identification must be removed from any non-accepted supplies. The primary point of contact is Theodore Misiolek, reachable via email and phone, and all submissions must be made through the DIBBS platform.
Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332510
New
DIBBS
CRANK, HAND
Solicitation # SPE7LX-26-U-9330
The contract pertains to the procurement of 180 units of a hand crank identified by part number 1103-1945-01 and NSN 5340016237876 under solicitation SPE7LX-26-U-9330, issued by the Department of Defense’s Strategic Acquisition Program Directorate. Delivery is required within 76 days FOB origin with no variance allowed in quantity, and acceptance is to occur at the destination point. Packaging must comply with DLA’s Master List of Technical and Quality Requirements, which supersede all other standards, including ASTM D3951 for non-hazardous items and FED-STD-313 for hazardous material classifications. All packaging and labeling must adhere to MIL-STD-129 and palletization must follow RP001 DLA Packaging Requirements. The supply is covered under DLA Direct, CONUS, and the unit of issue is each, with a total price of $180. Documentation for source approval must be submitted if proprietary or insufficient data exists, and government identification must be removed from non-accepted supplies. The contract’s technical specifications are derived from the DLA Master List, the applicable revision of which is controlled by the solicitation issue date. Point of contact for inquiries is Theodore Misiolek, with the response deadline set for August 20, 2026.
Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details
NAICS: 336390
New
DIBBS
BRAKE, SEGMENTED ROTOR
Solicitation # SPE7LX-26-U-9296
The contract specifies the procurement of a brake segmented rotor identified by NSN 2530015567156 and part number RDA-1550-951 from Meritor Heavy Vehicle Systems, LLC, under solicitation SPE7LX-26-U-9296. It is classified as a commercial item and falls under a total small business set-aside. The requirement is for 141 units to be delivered FOB origin within 145 days with no variance allowed in quantity. Delivery is to be made to the destination where inspection and acceptance occur. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including individual packaging with QUP 001, and all items must be preserved using code 89 preservative material to prevent corrosion on bare metal, moving parts, and threads. The packaging also requires barrier wrapping with code GC to prevent surface abrasion and corrosion from contact with blocking and bracing materials, and cushioning using code AD rigid low-density materials or wood and plywood conforming to specified standards. All packaging and marking must adhere to MIL-STD-129 with special marking code ZZ indicating “ARROW UP OPEN THIS SIDE.” Blocking and bracing must be designed to protect against shock and vibration, using materials compatible with the load and item surfaces, with wood and plywood members engineered for strength and easy removal without damage. The item is subject to DLA’s master list of technical and quality requirements referenced by R and I numbers, and all contractual obligations are governed by the version of the master list in effect on the solicitation issuance date.
Other Motor Vehicle Parts Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332510
New
DIBBS
CLAMP, LOOP
Solicitation # SPE7LX-26-U-9327
The contract pertains to the procurement of 2,082 units of CLAMP, LOOP with NSN 5340-01-485-6847 under solicitation SPE7LX-26-U-9327, which was posted on August 5, 2026, with a response deadline of August 20, 2026. The acquisition is a Total Small Business Set-Aside as defined by FAR 19.5, classified under NAICS code 332510, and managed by the Strategic Acquisition Program Directorate within the Department of Defense. Delivery is required within 116 days after award, and the contract incorporates technical and quality requirements referenced by R or I numbers from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or amendment date. Packaging must comply with DLA standards, and non-accepted supplies must have all government identification removed per RQ011. The point of contact for inquiries is Theodore Misiolek, reachable via email or phone provided.
Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332510
New
DIBBS
CATCH, FLUSH
Solicitation # SPE7LX-26-U-9307
The contract pertains to the procurement of 806 units identified by NSN 5340-01-097-4918 under solicitation SPE7LX-26-U-9307, with a delivery requirement of 118 days after award. It mandates compliance with the Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment and incorporates requirements for Covered Defense Information as defined under RD002. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition type. Packaging must adhere to DLA packaging standards, and any non-accepted supplies must have all government identification removed prior to disposition. The solicitation was posted on August 5, 2026, with responses due by August 20, 2026, and falls under NAICS code 332510. The contract is administered by the Department of Defense’s Strategic Acquisition Program Directorate, with Theodore Misiolek listed as the primary point of contact, reachable via email and phone provided. The procurement is classified as federal with no set-aside designation specified.
Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details
NAICS: 339991
New
DIBBS
SEAL, PLAIN
Solicitation # SPE7LX-26-U-9284
The contract is for 2,029 plain seals with the NSN 5330-01-504-8614 under solicitation SPE7LX-26-U-9284, issued by the Department of Defense’s Strategic Acquisition Program Directorate. The solicitation is a total small business set-aside, meaning only qualifying small businesses may respond, and it is governed by the NAICS code 339991. Technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for this simplified acquisition. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed prior to return. Source approval documentation must be submitted in accordance with the specified documentation requirements. Delivery is required within 54 days after award, and all responses must be submitted by August 20, 2026. The primary point of contact is Theodore Misiolek, reachable via phone or email, and additional details are available through the DIBBS portal.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332510
New
DIBBS
LOCK, RIM
Solicitation # SPE7LX-26-U-9319
The contract pertains to the procurement of 297 units of a LOCK, RIM with NSN 5340-01-652-0224, issued under solicitation SPE7LX-26-U-9319 by the Strategic Acquisition Program Directorate within the Department of Defense. The requirement is subject to the DLA Packaging Requirements for Procurement and incorporates technical and quality specifications identified by R or I numbers from the DLA Master List of Technical and Quality Requirements, which must be accessed online for full compliance. For this solicitation, the applicable version of the master list is determined by the solicitation issuance date. The contract is a total small business set-aside under FAR 19.5, with a NAICS code of 332510, indicating it is targeted toward small businesses in the manufacturing sector. The delivery deadline is set for 116 days after award, and the solicitation was posted on August 5, 2026, with responses due by August 20, 2026. Government identification must be removed from any non-accepted supplies in accordance with the specified requirements. The primary point of contact for inquiries is Theodore Misiolek, reachable via email and phone listed in the contract data.
Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details
NAICS: 339991
New
DIBBS
SEAL, OIL, HORIZONTAL
Solicitation # SPE7LX-26-U-9310
The contract is for 538 units of a horizontal oil seal with NSN 5330-01-662-9969, solicited under number SPE7LX-26-U-9310 with a response deadline of August 20, 2026, and a required delivery within 98 days of award. This is a total small business set-aside under FAR 19.5, targeting NAICS code 339991 for other miscellaneous manufacturing, and is issued by the Department of Defense’s Strategic Procurement Program Directorate. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless superseded by an amendment. Packaging must comply with DLA procurement standards, and non-accepted supplies must have all government identification removed prior to return. All data provided is proprietary or insufficient for competitive bidding, indicating the requirement is based on proprietary specifications. The primary point of contact is Theodore Misiolek, reachable via email and phone provided.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details
NAICS: 333613
New
DIBBS
SHAFT, DRIVE, FLEXIBL
Solicitation # SPE7LX-26-U-9292
The contract pertains to the procurement of 135 flexible drive shafts identified by NSN 3040-01-457-0460 under solicitation SPE7LX-26-U-9292, with a required delivery within 98 days of award. The specification strictly limits acceptable products to those precisely described on the referenced drawing, and no alternative offers will be evaluated or approved by DLA Land & Maritime. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger acquisitions, unless an amendment supersedes it. The contract is administered by the Strategic Acquisition Program Directorate under the Department of Defense, with Theodore Misiolek designated as the primary point of contact. The NAICS code 333613 classifies this as a manufacturing procurement, and the solicitation is open to federal contractors with a response deadline of August 20, 2026. Government identification must be removed from any non-accepted supplies, and potential suppliers seeking future qualification must engage directly with the cognizant design activity as outlined in FAR Clause 52.209-1.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details
NAICS: 326220
New
DIBBS
O-RING
Solicitation # SPE7LX-26-U-9313
The contract pertains to the supply of O-RINGS with the national stock number 5331-01-119-0468, for a quantity of 290 units, under solicitation SPE7LX-26-U-9313, with a response deadline of August 20, 2026, and a delivery requirement of 95 days after award. This is a total small business set-aside under NAICS code 326220, managed by the Department of Defense’s Strategic Acquisition Program Directorate. The item must be packaged in a medium-duty, waterproof, greaseproof, and opaque bag compliant with MIL-DTL-117, Type II, Class C, Style 1, to protect against UV degradation, applicable to direct vendor delivery, foreign military sales, and stock shipments. All supplies must be free of asbestos, with any alternatives requiring approval per Clause L30 and Provision 4 conditions. Technical and quality requirements identified by R or I numbers are governed by the DLA Master List, with revision control tied to the solicitation or award date depending on acquisition size. Documentation for source approval, removal of government identification from non-accepted items, and handling of covered defense information are also mandated. The point of contact for the contract is Theodore Misiolek, reachable via email and phone provided.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details