This Subcontract opportunity from California was posted on October 8, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Aruba Technical Support and Maintenance Services

Closed

State & Local

Submission Closed10/22/2026, 01:00:00 PM PDT

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811219

New

Federal

Component Maintenance and RepairThis subcontract, titled Component Maintenance and Repair, involves providing specialized maintenance and repair services for government-furnished equipment supporting prime contractors on Department of Defense contracts. The selected provider will be responsible for maintaining items based on specific brand, model, or OEM numbers, implementing necessary mitigation actions using specialized tools and facilities. All work must strictly comply with Section 889 regulations concerning telecommunications equipment, and deliverables include the restored items accompanied by detailed maintenance reports. Managed by the Aviation Logistics Center under the Department of Homeland Security, the opportunity falls under NAICS code 811219. The solicitation was posted on November 13, 2026, with a response deadline of November 19, 2026.

Aviation Logistics Center (ALC)(00038)

POSTED

DEADLINE

Repair and Overhaul of Cylinder Assembly, AThis subcontract, managed by the Navsup Weapon Systems Support Mech under the Department of Defense, involves the repair and overhaul of Cylinder Assembly, A for Department of the Navy projects. The scope of work includes the complete teardown, internal inspection, and evaluation of units to identify wear and failure points, followed by precision machining and hydraulic repairs to ensure compliance with technical specifications for CAGE 0EYA6 and Ref. No. PAAI061728. The contractor is required to maintain CMMC compliance and provide Buy American Act certification. Final deliverables consist of fully functional repaired units accompanied by Material Inspection and Receiving Reports featuring Unique Identifiers. Performance of these services will take place in Chesapeake, and the project falls under NAICS code 811219.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

CTS TAFS Electrical and Electronic MaintenanceThe CTS TAFS Electrical and Electronic Maintenance subcontract involves providing specialized technical services for prime contractors on Naval Research Laboratory projects. The scope of work focuses on performing selective electrical and electronic inspections, performance verification, and alignment check and adjustment maintenance specifically for CTS TAFS system hardware. The ultimate goal of the engagement is to deliver a fully inspected, verified, and aligned system. Due to the technical nature of the requirements, the contractor must possess specialized technician certification for precision measurement and test equipment. This project is managed under the Department of Defense for the Naval Research Laboratory, with the place of performance located in Washington. The opportunity is categorized under NAICS code 811219.

Naval Research Laboratory

POSTED

DEADLINE

Vantive AK 98 Dialysis Equipment Service & RepairThis subcontract involves providing annual preventative maintenance and emergency repair services for Vantive model AK 98 dialysis machines to support prime contractors on Department of Veterans Affairs medical equipment projects. The work is performed in Durham, North Carolina, and requires the delivery of fully operational equipment along with detailed maintenance logs. To qualify for this engagement, service providers must hold Vantive US Healthcare LLC certification or possess OEM-level authorization specifically for the AK 98 model to ensure all work meets original equipment manufacturer specifications. The opportunity is managed under the Department of Veterans Affairs Network Contracting Office 6.

246-NETWORK Contracting Office 6 (36C246)

POSTED

DEADLINE

Medical Equipment Warranty and Support Services

NYS Office of Mental Health

POSTED

DEADLINE

Survey Priority Support Plan ProviderThis subcontract opportunity is for a Survey Priority Support Plan Provider to support prime contractors working on City of Tampa Wastewater Department projects. The primary objective is to ensure maximum equipment uptime and provide essential technical assistance specifically for the Trimble S5 Robotic Survey system through a comprehensive maintenance plan and active support contract. To be eligible, the provider must be an authorized Trimble support provider. Interested parties should note that the solicitation was posted on November 12, 2026, with a response deadline of November 18, 2026. The contract falls under NAICS code 811219 and is managed by the Wastewater agency in Florida.

POSTED

DEADLINE

Medivator Endoscope Reprocessing System Relocation SpecialistThis subcontract, titled Medivator Endoscope Reprocessing System Relocation Specialist, involves the disconnection, transport, re-installation, and operational testing of six Advantage Plus Endoscope Reprocessing Systems for Department of Veterans Affairs projects. The selected specialist will be responsible for uninstalling the systems, verifying connection points against manufacturer requirements, and reinstalling the equipment in temporary scope processing room BM-107 using manufacturer-specific tools and testing equipment. The project requires strict adherence to Manufacturer Installation Requirements to ensure the delivery of six fully operational systems and a final verification report. This opportunity is associated with Network Contract Office 23 and falls under NAICS code 811219, with a response deadline of November 22, 2026.

Network Contract Office 23 (36C263)

POSTED

DEADLINE

Preventive Maintenance for Haier CentrifugesThis subcontract, issued by ALPS Pte. Ltd., involves providing specialized preventive maintenance for Haier brand centrifuges supporting prime contractors on NUHS cluster healthcare projects in Singapore. The scope of work includes detailed inspections of drive systems, brushes, and rotors, as well as essential lubrication and the verification of timer and speed accuracy through the use of vibration analysis equipment and tachometers. The selected provider is responsible for delivering comprehensive PM service reports and official certifications confirming the operational readiness and safety of the equipment. Interested parties must respond by November 24, 2026, in accordance with the solicitation posted on November 12, 2026.

POSTED

DEADLINE

TEM System Technical Support and Warranty ServicesThe TEM System Technical Support and Warranty Services subcontract involves providing specialized installation, calibration, and warranty maintenance for prime contractors on laboratory projects at the University of Warwick. The scope of work focuses on technical support for biasing, heating, and cooling systems, utilizing TEM-specific diagnostic software for on-site troubleshooting and calibration. To ensure quality and precision, the service provider must hold technical certification in TEM operation. The contractor is responsible for delivering a fully functional system along with all necessary calibration certificates and detailed maintenance reports. This engagement is categorized under NAICS code 811219, with a response deadline set for December 11, 2026.

University Of Warwick

POSTED

DEADLINE

HPLC System Installation and Training ServicesThis subcontract for HPLC System Installation and Training Services supports laboratory projects at Texas A&M University AgriLife Research. The selected provider is responsible for the physical setup, unpacking, and installation of the HPLC system, ensuring it is fully calibrated and configured for immediate operational use. Additionally, the contractor must provide all necessary operational and maintenance manuals to the university. A critical component of the agreement is the delivery of comprehensive personnel training to ensure staff can operate the system effectively. To qualify for the engagement, the contractor must maintain a current certificate of insurance. The ultimate goal of the contract is the delivery of a fully functional, calibrated system and a staff proficient in its operation.

POSTED

DEADLINE

Laser System Extended Warranty ProviderThis subcontract for the University of Michigan involves providing extended warranty and technical support for scientific equipment projects. The selected provider will be responsible for the maintenance and repair of Pump Laser units through service agreements that encompass parts, labor, and guaranteed response times during standard business hours. To ensure precision, the provider must utilize specialized diagnostic tools for laser calibration and employ technicians who hold manufacturer certification. The primary deliverables include an executed warranty agreement and ongoing technical support. This opportunity is categorized under NAICS code 811219 and was posted on November 10, 2026, with a response deadline of November 18, 2026.

University of Michigan

POSTED

DEADLINE

Biomek i3 Installation, Training, and Warranty SupportThis subcontract for the National Institutes of Health Olao involves the physical installation and operator training for the Biomek i3 system. The selected provider must be a certified Authorized Beckman Coulter service technician to ensure the system is correctly installed and that staff receive proper basic operational training. The scope of work includes the delivery of a fully installed system and the management of a one-year service warranty and support agreement. Key deliverables consist of a functional system, trained personnel, and a signed service contract. The response deadline for this opportunity is November 24, 2026.

National Institutes Of Health Olao

POSTED

4 days ago

DEADLINE

in 10 days

AI Contract Overview

This subcontract for Aruba Technical Support and Maintenance Services involves providing specialized technical support and maintenance for Aruba network assets within the County of San Mateo Technology Services Department. The selected provider will be responsible for executing maintenance protocols for Aruba 3810M switches and 7220/7030 controllers, utilizing remote diagnostic tools and Aruba Network Management systems to deliver ongoing support and firmware patching. To qualify for this engagement, the contractor must maintain HPE Authorized Channel Partner status and employ staff with ACMA or ACMP certifications. The solicitation was posted on October 8, 2026, with a response deadline of October 22, 2026, falling under NAICS code 811219.

General Info

Technical support and maintenance for Aruba network assets in San Mateo County.

Agency

California → Technology Services

NAICS

811219 - Other Electronic and Precision Equipment Repair and Maintenance

Place of Performance

CA, USA

Set-Aside

NONE

Documents

This scope was carved out of 2027-IFB-00143.

The full solicitation package (4 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Aruba Foundation and Advanced Care Renewal FY26-29

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedOct 8

subcontract

Response DeadlineOct 22

Deadline has passed

Submission Closed

10/22/2026, 01:00:00 PM PDT

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyCalifornia → Technology Services

ContactsNo contacts available

OfficeN/A

Organization / AgencyCalifornia → Technology Services

Office AddressN/A

ContactsNo contact information available

Full Description

Performs technical support and maintenance for Aruba network assets for prime contractors on County of San Mateo Technology Services Department projects. Executes maintenance protocols for Aruba 3810M switches and 7220/7030 controllers using remote diagnostic tools and Aruba Network Management systems. Requires HPE Authorized Channel Partner status and ACMA/ACMP certified staff. Delivers ongoing technical support and firmware patching.