Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Asbestos Encapsulation & Abatement Services

Active

State & Local

Response Deadline08/17/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the safe encapsulation, removal, and abatement of asbestos-containing materials in strict adherence to all applicable federal, state, and local regulations. All work must be performed with rigorous attention to health and safety protocols to prevent exposure and environmental contamination. Proper disposal of asbestos waste is mandated, including transport to permitted facilities and adherence to chain-of-custody requirements. Comprehensive documentation must be maintained throughout the project, covering inspection reports, work plans, air monitoring results, and final certifications to validate compliance and completion. The solicitation is issued as a subcontract under NAICS code 562910 for hazardous waste remediation services, with a response deadline of August 17, 2026. The contract is managed by the California office of AS-Procurement with no specified set-aside designation or place of performance details provided. While no point of contact is listed, the procurement portal link is available for further inquiry. All contractors must demonstrate proven experience in asbestos abatement and full regulatory knowledge to qualify for award.

General Info

Asbestos abatement required with strict regulatory compliance, proper disposal, and detailed documentation by August 17, 2026.

Agency

California → AS- Procurement (AS-P)View Agency

NAICS

562910 - Remediation ServicesView NAICS

Place of Performance

CA, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 13

subcontract

Response DeadlineAug 17

Submission deadline

Response Deadline

08/17/2026, 09:00:00 PM UTCin 28 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyCalifornia → AS- Procurement (AS-P)

ContactsNo contacts available

OfficeN/A

Organization / Agency

California → AS- Procurement (AS-P)

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Safe encapsulation, removal, and abatement of asbestos-containing materials in compliance with federal, state, and local regulations, including proper disposal and documentation.

Similar Contracts

Same NAICS industry code

Radioactive Materials Handling & Notification ServicesThe contract pertains to the identification, labeling, and advance notification of items containing radioactive materials that exceed established regulatory thresholds, ensuring compliance with federal safety and handling standards. Services under this subcontract will involve meticulous tracking and documentation of radioactive content within supplies destined for Department of Defense use, with strict protocols for marking containers and providing timely alerts to relevant personnel and facilities prior to delivery. This work supports the Defense Logistics Agency’s responsibility to manage hazardous materials across military supply chains while safeguarding public health and operational integrity. The contract falls under NAICS code 562910, indicating it is classified as other waste management services, and is managed by the Department of Defense through the Defense Logistics Agency. It is structured as a subcontract with no specified set-aside status, and performance is expected to occur within the broader scope of DoD logistics operations, though no specific geographic location is designated. The solicitation was posted on July 20, 2026, and the contract’s formal reference is linked to award SPE7L126D62CC with delivery order SPE7L026F5671, indicating integration into existing DoD procurement systems for hazardous material handling and regulatory compliance.

Defense Logistics Agency

POSTED

about 10 hours ago

DEADLINE

Hazardous Material Packaging and Labeling Services

Defense Logistics Agency

POSTED

about 10 hours ago

DEADLINE

Hazardous Materials Handling (if applicable)The contract requires specialized handling and secondary containment procedures for any mercury-containing components that may be present within the seal kit, in full compliance with NAVSEA 5100-003D standards. This provision ensures that all hazardous materials are managed with strict safety protocols to prevent environmental contamination and protect personnel, reflecting the high-risk nature of mercury exposure. The work is classified under NAICS code 562910, indicating it falls under waste treatment and disposal services, and is issued as a subcontract by the Defense Logistics Agency under the Department of Defense, with performance expected to adhere to federal hazardous materials regulations regardless of location. The contract was posted on July 20, 2026, and is linked to the reference number SPE7L326P4971, though no specific place of performance or point of contact is provided. The absence of a set-aside designation suggests the subcontract is open to all eligible contractors without demographic or size restrictions. While the exact scope of work beyond mercury handling is not detailed, the explicit reference to NAVSEA 5100-003D underscores the necessity for certified procedures, documentation, and equipment for containment, cleanup, and disposal of mercury-contaminated materials, making this a high-compliance, low-tolerance requirement for any subcontractor involved.

Defense Logistics Agency

POSTED

about 10 hours ago

DEADLINE

Hazardous Materials Handling and LabelingThe contract titled Hazardous Materials Handling and Labeling requires strict adherence to OSHA and Department of Defense standards for the proper labeling, documentation, and handling of hazardous materials associated with supplied components. All activities must be conducted in full compliance with federal safety and environmental regulations to ensure the protection of personnel, facilities, and the environment throughout the supply chain. The work is focused on ensuring accurate and consistent identification of hazardous substances, maintaining required records, and implementing safe handling procedures as mandated by regulatory bodies. This subcontract is under the Maritime Supply Chain division of the Department of Defense, with performance required at a designated location in New Cumberland, Pennsylvania, zip code 17070-5002. The solicitation was posted on July 20, 2026, with a required response deadline of July 31, 2026. The NAICS code 562910 indicates the contract pertains to waste collection and treatment services, aligning with environmental compliance and hazardous material management. Participants must demonstrate expertise in handling regulated substances and maintaining documentation in accordance with DoD and OSHA protocols to qualify for award.

MARITIME SUPPLY CHAIN

POSTED

about 10 hours ago

DEADLINE

Hazardous Materials and Contamination Zone SupportThis contract supports operations within hazardous contamination zones at Camp Lejeune, North Carolina, under a HUBZone set-aside designation, requiring specialized services to ensure safety and compliance in high-risk environments. Key responsibilities include managing visitor access, provisioning and enforcing proper personal protective equipment, reporting spills promptly, and inspecting hazardous waste handling procedures to maintain operational integrity and regulatory adherence. The work falls under NAICS code 562910, classifying it as environmental remediation and waste management services, and is structured as a subcontract under the Department of Defense through NAVFACSYSCOM Mid-Atlantic. The opportunity was posted on July 20, 2026, with a response deadline of August 19, 2026, and is limited to qualified HUBZone-certified small businesses seeking to provide critical support in contamination control zones.

Navfacsyscom Mid-Atlantic

POSTED

about 15 hours ago

DEADLINE

Clouse Hill Reclamation ProjectThis is a twenty-four-month contract for the Clouse Hill Reclamation Project under the Tennessee Department of Environment and Conservation, with a solicitation number of 32701-13951 and a response deadline of August 26, 2026. The project involves the reclamation of 84.5 acres of abandoned strip mines across multiple sites, including site clearing, grading, dewatering, construction of rock-lined channels and anoxic limestone drains, road restoration, and revegetation. Work must comply with ASTM and AASHTO standards for materials such as filter fabric, rip-rap, and limestone, with specific performance thresholds for tensile strength, puncture resistance, permeability, and durability. All deliveries are F.O.B. destination, with performance occurring at varying project locations including Tracy City and Grundy County, and the contractor must ensure all goods and services are delivered and performed within 330 days of purchase order issuance, with an optional 180-day extension. The contract is awarded on a Lowest Price Technically Acceptable basis, meaning only bids that fully meet all technical and compliance requirements are eligible, with award going to the lowest priced compliant offer. The contractor must adhere to stringent state-specific requirements including prohibitions on the use of undocumented workers, conflicts of interest involving former state employees within the past six months, and bans on boycotts of Israel. Confidential information must be safeguarded, subcontracting is prohibited without prior written approval, and no assignment of the contract is allowed. All personnel records must be maintained and made available for state inspection. The offeror must certify non-debarment, non-involvement in collusion or fraud, absence from the Iran Divestment Act list, and that they are not a foreign adversary company as defined by 2026 legislation. Electronic submission through the Tennessee Edison Supplier Portal is mandatory, with mailed responses requiring original ink signatures and sealed envelopes. The contract has a maximum potential value of $1,800,000, though no unit prices or detailed cost breakdowns are provided for the ten line items encompassing mobilization, earthwork, rock placement, silt barriers, pond treatment, road restoration, and vegetation establishment. The State reserves the right to issue modifications via Memorandum of Understanding, conduct on-site inspections at any time, and accept work only after formal inspection and approval, with the contractor bearing all costs for corrections and re-inspections. Compliance with all technical specifications, reporting requirements, and state

Tennessee Department of Environment and Conservation

POSTED

about 22 hours ago

DEADLINE

in about 1 month

Mercury-Containing Component HandlingThe contract pertains to the safe containment, handling, and disposal of mercury-containing components in accordance with NAVSEA 5100-003D standards, ensuring strict compliance with environmental and safety protocols for hazardous materials. The work is to be performed at the New Cumberland facility with a postal code of 17070-5002 under the oversight of the Department of Defense through the DDSP New Cumberland Facility. This subcontract is classified under NAICS code 562910, indicating specialized waste management services for hazardous substances, and requires full adherence to federal regulations governing mercury handling. Proposals must be submitted by the deadline of July 30, 2026, with the solicitation posted on July 19, 2026, and all activities must align with the technical and procedural requirements outlined in NAVSEA 5100-003D to ensure proper disposal and environmental protection.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Radioactive Materials Notification & Handling (if applicable)The contract pertains to the detection, reporting, and proper handling of radioactive materials that exceed established threshold levels within the CAM, CONTROL component of the Department of Defense’s supply chain. It requires strict adherence to labeling protocols and timely notification procedures to ensure regulatory compliance and safety. All activities must be executed in alignment with federal standards for radioactive material management, with particular focus on identification, documentation, and response protocols when anomalies are detected. Performance is targeted at the location in Portsmouth with postal code 03801-5000, and the work is structured as a subcontract under the NAICS code 562910, indicating environmental remediation and waste management services. The solicitation was posted on July 19, 2026, with a firm response deadline of July 30, 2026, and is managed by the Land Supply Chain organization under the Department of Defense. While specific point of contact details are not provided, the official solicitation can be accessed through the DIBBS system using the referenced link to obtain detailed requirements and submission guidelines.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Hazardous Materials Handling and LabelingThis contract requires the proper application of hazard warning labels and strict adherence to mercury containment and hazardous material handling protocols in compliance with DFARS and NAVSEA standards. The work involves ensuring all materials are labeled accurately and handled according to federal defense regulations to mitigate risks associated with toxic substances and environmental hazards. All activities must align with the specific technical and procedural requirements dictated by the Department of Defense to maintain safety and regulatory integrity throughout the supply chain. The contract is classified as a subcontract under NAICS code 562910 and is issued by the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense. It was posted on July 19, 2026, with a response deadline of July 27, 2026. Performance location details are not specified, and no set-aside status is indicated. The sole point of reference for submission and further details is the DIBBS portal link provided, which serves as the official platform for accessing solicitation materials and submitting proposals.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Hazardous Materials Packaging and Labeling ServicesThe contract requires compliant packaging, marking, and labeling of hazardous and radioactive materials in accordance with MIL-STD-129 and ASTM D3951 standards, ensuring all materials are properly prepared for safe transport and handling. This includes the application of bar-coding for accurate tracking and the timely submission of Safety Data Sheets (SDS) to support regulatory compliance and operational safety. The work is structured as a subcontract under the Department of Defense’s Land Supply Chain, with performance located at Fort Carson, Colorado, 80913-4093. The solicitation was posted on July 19, 2026, and responses must be submitted by July 30, 2026, with the NAICS code 562910 indicating waste management and remediation services as the primary classification.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Hazardous Materials Packaging and LabelingThis contract requires the identification, classification, labeling, and documentation of hazardous materials for ocean transport, ensuring full compliance with OSHA HazCom, DOT, and MIL-STD-129 standards. The work involves accurate handling of dangerous goods to meet federal and military regulations, with a focus on proper packaging, clear labeling, and complete recordkeeping to support safe and lawful shipment via maritime routes. All activities must align with established protocols for hazard communication and transportation safety, particularly for materials destined for Department of Defense operations. The contract is a subcontract under the agency name LAND SUPPLY CHAIN, part of the Department of Defense, with performance located in Silverdale, Washington, at ZIP code 98315-7000. It falls under NAICS code 562910, indicating waste management and remediation services. The solicitation was posted on July 19, 2026, and responses are due by July 30, 2026. All technical and administrative deliverables must satisfy stringent regulatory benchmarks to ensure interoperability across military logistics systems and adherence to international transport safety requirements.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Radioactive Materials Handling and MarkingThis contract mandates strict protocols for the handling, labeling, and notification of items containing radioactive isotopes that exceed established regulatory threshold levels. All parties involved must adhere to specialized procedures to ensure safety, compliance, and traceability throughout the supply chain, with clear requirements for external markings, internal documentation, and immediate reporting of any breaches or anomalies. The work is classified as a subcontract under the NAICS code 562910, indicating environmental remediation and waste management services, and is governed by the Department of Defense through its Maritime Supply Chain office. All responses must be submitted by the deadline of July 30, 2026, and the solicitation was posted on July 19, 2026. There is no designated set-aside status, and the place of performance details are not specified, implying that work could occur across multiple locations under DoD oversight. Compliance with federal radiation safety standards is non-negotiable, and failure to meet labeling or notification requirements may result in contract termination or penalties. Interested vendors must review the full solicitation through the provided DIBBS link to ensure full understanding of technical specifications and regulatory obligations.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

More opportunities from California → AS- Procurement (AS-P)

Same awarding agency

Electrical System Quality Control & InspectionThe contract calls for comprehensive quality control inspections of electrical systems in healthcare and other facilities to ensure strict adherence to safety and code requirements. Key tasks include performing grounding continuity tests that must meet a maximum resistance of 2 ohms and conducting receptacle pin retention checks requiring a minimum force of 115 grams to verify secure electrical connections. These inspections are critical for maintaining operational integrity and regulatory compliance in sensitive environments where electrical reliability directly impacts safety and functionality. The work is structured as a subcontract under NAICS code 541370 and is managed by AS-Procurement (AS-P) under the California agency. The solicitation was posted on July 13, 2026, with responses due by August 17, 2026. Performance location details are not specified, and no set-aside classification is indicated, leaving the opportunity open to eligible subcontractors who can demonstrate technical capability in electrical system verification and compliance testing.

Surveying and Mapping (except Geophysical) Services

POSTED

DEADLINE

Building System Commissioning & TestingThe contract titled Building System Commissioning & Testing seeks a subcontractor to perform comprehensive commissioning, functional testing, and verification of electrical and control systems to ensure full operational performance. This includes all phases of system validation from initial startup through final verification, with a focus on confirming that equipment and controls function as designed and meet specified performance criteria. Documentation of all testing procedures, results, and corrective actions is required, along with active coordination with project stakeholders to ensure alignment with operational goals and compliance with technical specifications. The work is classified under NAICS code 541330 and is posted as a subcontract opportunity by AS Procurement under the California agency. The solicitation was published on July 13, 2026, with responses due by August 17, 2026. While the exact location of performance is not specified, the effort is anticipated to support building systems within California. The contract emphasizes technical precision, thorough documentation, and seamless communication among project teams to deliver systems that are fully functional, reliable, and ready for handover.

Engineering Services

POSTED

DEADLINE

Lead-Based Paint RemediationThe contract pertains to the identification, containment, and remediation of lead-based paint hazards in compliance with EPA and OSHA regulations, requiring thorough surface preparation, encapsulation, or complete removal of hazardous materials. Work must be performed to industry-standard safety and environmental protocols, ensuring the protection of workers and occupants during all phases of remediation. The scope is narrowly focused on hazardous material abatement services, with no indication of broader construction or renovation activities. This is a subcontract opportunity posted on July 13, 2026, with a response deadline of August 17, 2026, under NAICS code 562910 for other remediation services. The procuring entity is AS-Procurement (AS-P) under the California agency, though specific location details for performance or contact are not provided. Interested parties must submit responses through the provided procurement portal before the deadline, with no set-aside classification or demographic preferences indicated in the solicitation.

Remediation Services

POSTED

DEADLINE

Electrical Control Systems Installation & IntegrationThe contract calls for the complete furnishing, installation, and integration of electrical control systems, requiring full lifecycle support from initial setup through final commissioning and testing. The work must ensure seamless operational performance across all designated design ranges and includes close coordination with other trades to guarantee system interoperability and functional reliability. All activities are subject to strict adherence to industry standards and project-specific requirements to achieve certified performance outcomes. This subcontract, identified under NAICS code 238210, is administered by AS-Procurement (AS-P) through the California agency office, with a response deadline of August 17, 2026. The place of performance and specific location details are not provided, but the scope implies on-site execution at an undisclosed facility or facilities under California jurisdiction. Contractors are expected to manage logistics, scheduling, and technical integration independently while maintaining alignment with broader project objectives and timelines.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

LA County (CDBG Projects) Job Order Contracts Numbers 153, 154, & 155The Los Angeles County Development Authority (LACDA) is soliciting bids for three Job Order Contracts (JOCs) numbered 153, 154, and 155 under Solicitation Number LACDA26-044, aimed at providing construction services for Community Development Block Grant (CDBG) projects throughout Los Angeles County. These are firm-fixed-price, indefinite quantity contracts with a term of one year or until the maximum contract value of $6,402,606.00 is expended, whichever occurs first; however, any work order issued prior to expiration will automatically extend the contract solely for completion of that scope. Bidders must submit separate, complete proposals for each JOC, answer all solicitation questions, and guarantee their bids for at least 270 days. Failure to provide accurate or complete responses may result in a non-responsible determination. Proposals must be submitted exclusively via the LACDA OpenGov Procurement portal by 2:00 p.m. on August 17, 2026; late or improperly submitted bids will be rejected. A mandatory virtual pre-bid meeting is scheduled for July 27, 2026, and attendance confirmation is required by July 24. The JOCs utilize Gordian’s proprietary software and Construction Task Catalog to establish unit prices for a wide array of repair, remodeling, and renovation tasks, with work orders issued to perform specific tasks at various sites across the County. All work must comply with the Statement of Work, applicable CSI MasterFormat divisions, federal and state regulations, and manufacturer specifications. The contracts are subject to strict compliance with federal and state labor standards, including the Davis-Bacon Act and California’s prevailing wage laws, with the higher wage rate prevailing in case of conflict; certified payrolls must be submitted and retained for three years. Contractors must provide performance and payment bonds at 100% of the contract value and a 5% bid bond, alongside required insurance coverage including general liability with completed operations and primary/non-contributory language, automobile liability covering owned, hired, and non-owned vehicles, and statutory workers’ compensation with employer’s liability and waiver of subrogation. Compliance with the Build America, Buy America Act, Section 3 of the Housing and Urban Development Act, California’s CSLB B-General Building Contractor license, Child Support Compliance Program, Equal Employment Opportunity, Fair Chance Employment Hiring Practices, Zero Tolerance Human Trafficking Policy, and other local

Commercial and Institutional Building Construction

POSTED

DEADLINE

Surveying and Site Layout ServicesThe contract titled Surveying and Site Layout Services encompasses comprehensive topographic surveys, boundary verification, and precise layout for construction elements, ensuring accurate site documentation and alignment with design specifications. These services are critical for infrastructure development and will require adherence to high standards of measurement and documentation to support subsequent construction activities. The work is classified under NAICS code 541370, indicating specialized engineering surveying services, and is structured as a subcontract with no set-aside designation. The solicitation was posted on July 13, 2026, with a response deadline of August 17, 2026, providing interested parties approximately one month to submit proposals. The contracting entity is AS-Procurement (AS-P) under the California agency, though specific office location and point of contact details are not provided. The place of performance is not clearly defined in the data, but the work is expected to occur within California. The contract opportunity is accessible through the online procurement portal at the provided link, where full details and submission requirements may be obtained.

Surveying and Mapping (except Geophysical) Services

POSTED

DEADLINE

Road Paving and Asphalt MillingThe contract pertains to roadway, parking lot, and airfield construction work involving milling, grading, and asphalt paving, classified under NAICS code 237310 for heavy and civil engineering construction. It is listed as a subcontract opportunity posted on July 13, 2026, with a response deadline of August 17, 2026, and is managed by AS-Procurement under the California agency. The work will be performed across unspecified locations within California, with no set-aside provisions detailed. All bids must be submitted by the stated deadline to be considered, and submissions should align with the scope of surface preparation and pavement installation services required for transportation and infrastructure projects. Interested parties can access additional details via the official procurement portal link provided.

Highway, Street, and Bridge Construction

POSTED

DEADLINE

Concrete Forming and PlacementThe contract pertains to the forming, reinforcing, and pouring of concrete for foundations, slabs, walls, and other structural elements as part of construction activities under NAICS code 238110. It is designated as a subcontract and was posted on July 13, 2026, with a response deadline set for August 17, 2026. The solicitation is managed by AS-Procurement under the California agency, though specific details regarding the location of performance, point of contact, or set-aside status are not provided. Interested parties must submit their proposals prior to the stated deadline to be considered for award. The project does not include additional information on funding source, payment terms, or required certifications beyond the scope of concrete work described.

Poured Concrete Foundation and Structure Contractors

POSTED

DEADLINE

Plumbing and Piping Systems InstallationThe contract titled Plumbing and Piping Systems Installation seeks qualified subcontractors to install comprehensive plumbing systems encompassing water supply, drainage, and gas piping for various building and infrastructure projects. It is classified under NAICS code 238220, indicating specialized trade contracting for plumbing, heating, and air conditioning, and is issued by AS-Procurement under the California agency. The opportunity was posted on July 13, 2026, with a response deadline of August 17, 2026, giving interested parties approximately one month to submit proposals. The place of performance has not been specified, suggesting work may be required across multiple locations within California. No set-aside preferences or organizational type restrictions are indicated, making this open to eligible subcontractors regardless of size or certification status. All submissions must be made through the official procurement portal linked in the contract posting.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Electrical Installation and Wiring ServicesThe contract titled Electrical Installation and Wiring Services is a subcontract for the installation of electrical systems on commercial or infrastructure projects, encompassing conduits, wiring, lighting, and power distribution. It is classified under NAICS code 238210 and was posted on July 13, 2026, with a response deadline of August 17, 2026. The procurement is managed by AS-Procurement under the California agency, though specific office location and point of contact details are not provided. The place of performance is unspecified, indicating flexibility in project locations within the state. Interested parties must submit responses prior to the deadline to be considered for award under this subcontract opportunity, with no set-aside designation identified for small businesses or other categories. The solicitation is accessible via an online portal link for further details and submission.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

CCE Grant Job Order Contracts Numbers 156, 157, 158, 159, 160, & 161The Los Angeles County Development Authority (LACDA) is soliciting bids for six Job Order Contracts (JOCs) numbered 156 through 161 under Solicitation LACDA26-045, which is structured as an indefinite-delivery/indefinite-quantity contract with a maximum value of $6,402,606.00. The contract term spans one year or until the maximum contract value is exhausted, whichever occurs first, with automatic extension permitted only to complete any work order issued before expiration. Bidders must submit separate proposals for each JOC number and guarantee their bids for a minimum of 270 days. The work involves construction, renovation, repair, and refurbishment services across Los Angeles County, executed via individual work orders based on pre-established unit prices derived from the Gordian JOC SolutionTM platform, which includes proprietary software, cost data, and a construction task catalog. All work must comply with the Statement of Work, California labor codes, prevailing wage requirements, and applicable state and local regulations, including those enforced by the California Division of Labor Standards Enforcement and the Contractors State License Board, which requires a B-General Building Contractor license. Bidders are obligated to adhere to all safety, environmental, and accessibility statutes, including the California Labor Code, ADA, and Civil Rights Act, and must demonstrate compliance with County-specific programs such as Child Support Compliance, Zero Tolerance for Human Trafficking, and Fair Chance Employment. Proposals must be submitted in hard copy only, hand-delivered to LACDA’s Alhambra office by the deadline of August 17, 2026, at 2:00 p.m., with no electronic submissions accepted. A mandatory virtual pre-bid meeting is scheduled for July 27, 2026. The award will follow a Lowest Price Technically Acceptable (LPTA) methodology, evaluating bids solely on price and a series of weighted prevailing wage and overtime adjustment factors tied to commercial and residential classifications, with no qualitative or technical trade-offs permitted. Bid bonding at 5% and full performance and payment bonds at 100% are required, along with comprehensive insurance coverage including general liability, automobile liability, workers’ compensation, professional liability, and crime coverage. Contractors must also be registered with the California Department of Industrial Relations, comply with the Gordian license agreement, and disclose any past labor violations, criminal convictions, false claims, debarments, or organizational conflicts of interest

Commercial and Institutional Building Construction

POSTED

DEADLINE

Specialty Trade Coordination and JOC Task Order ExecutionThe contract requires the contractor to act as a specialty subcontractor for repair, remodeling, and maintenance tasks under the Job Order Contracting framework, executing individual task orders as issued. This subcontracting role involves coordination and delivery of specialized trade services across a range of facilities, adhering to the standards and procedures outlined in the JOC system to ensure efficient and timely project completion. The work is governed under NAICS code 238210, which pertains to electrical contracting and related specialty trades, indicating the anticipated scope focuses on technical and skilled labor services. The opportunity is issued by the California-based AS-Procurement office, with no specific geographic restrictions listed for performance, suggesting work may occur across multiple sites within the state. The solicitation was posted on July 13, 2026, with a deadline for responses set for August 17, 2026. While no set-aside designation or point of contact is provided, the contract is structured as a subcontract under a larger government procurement framework, emphasizing the need for proven experience in JOC-based task execution and the ability to scale operations according to fluctuating work orders without direct contract modifications. All activity must align with the procedural and quality benchmarks established under the JOC vehicle.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE