Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

This Government Contract opportunity from Department Of Defense was posted on July 30, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Asphalt Paving and Roadway Construction

Closed
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 237310
New
Pier B On-Dock Rail Support Facility West Expansion and Pier B Street Realignment
Solicitation # HD-S3135
Kiewit Infrastructure West Co. is soliciting quotes from qualified SBE, VSBE, and DBE firms for the Pier B On-Dock Rail Support Facility West Expansion and Pier B Street Realignment project in Long Beach, California. The scope of work is extensive, covering heavy civil and infrastructure activities including site preparation, asbestos abatement, tunneling, underground piping, asphalt and concrete paving, electrical systems, and telecommunications. Interested firms must provide evidence of certification through the Department of General Services and the Port of Long Beach PlanetBids portal. Bidders are required to hold a valid California Contractor's license, provide acceptable insurance, and may be required to provide bonding for 100 percent of their contract value, with bond premiums reimbursed by Kiewit. The project is subject to a Project Labor Agreement, prevailing wage rates, and the California Labor Code. Firms performing onsite work must be signatory to collective bargaining agreements with specific trades, including carpenters, laborers, cement masons, ironworkers, operating engineers, and teamsters. Funding is provided through multiple grants, including the FHWA, LACMTA, the State of California Transportation Agency, and the U.S. DOT MARAD 2021 Port Infrastructure Development Program, necessitating compliance with DBE Program requirements. Interested parties must contact Lead Estimator Cassandra Shore to receive an Invitation to Bid via the BuildingConnected system, with a response deadline of September 15, 2026.
Kiewit Infrastructure West Co.

POSTED

about 8 hours ago

DEADLINE

in 3 days
NAICS: 237310
New
SLED
NH-093-1(035) Farrington Highway Widening
Solicitation # B27000387
The Farrington Highway Widening project, solicitation B27000387, is an invitation for bids issued by the Hawaii Department of Transportation to develop an auxiliary lane between Nanakuli Avenue and Mohihi Street in the District of Ewa, Oahu. The scope of work includes excavation, cold-planing, paving, striping, signage, drainage structure modifications, and the installation of retaining walls. The estimated construction cost is between 35 million and 37 million dollars, with a performance period of 780 calendar days from the start work date. Bidders must hold a valid State of Hawaii General Engineering A license and submit their proposals via HiePRO by October 28, 2026. The contract will be awarded to the lowest responsible and responsive bidder based on the summation of unit bid prices and approximate quantities. Key requirements include the submission of a surety bid bond for proposals exceeding 25,000 dollars, as well as performance and labor and material payment bonds. The project adheres to federal and state regulations, including the Davis-Bacon Act, the Build America, Buy America Act, and Hawaii Revised Statutes Chapter 103D. Contractors are required to comply with strict prompt payment terms, paying subcontractors within 10 calendar days of receiving progress payments from the agency. Final acceptance is determined by the Engineer based on full compliance with contract documents, including specific quality standards for pavement smoothness and compaction.
Department of Transportation

POSTED

about 14 hours ago

DEADLINE

in about 2 months
NAICS: 237310
New
SLED
ACADEMY OF RICHMOND COUNTY PARKING LOT PAVEMENT REPAIR and STRIPING
Solicitation # 26-214
The Richmond County Board of Education has issued RFP 26-214 for turnkey pavement repair and striping services at the Academy of Richmond County, located at 910 Russel St., Augusta, Georgia. The scope of work includes patching designated areas to match existing pavement, installing curb and gutter to enclose grease trap access manholes, and performing line striping. Specific technical requirements include the use of 3,000 FSI concrete with a fine broom finish, 98% compacted subgrade, and MPI #32 alkyd traffic-marking paint. All new striping and hatching must be yellow, while stop bars and existing crosswalks must be recoated in white, adhering to Georgia DOT Construction Standards. Asphalt top courses must cure for at least 14 days before painting. The contract will be awarded to the lowest responsible and responsive bidder, with an anticipated award date of October 20, 2026. Sealed bids are due by 3:00 PM on October 7, 2026, and must include turnkey pricing, a project lead time, company references, and a signed Sex Offender Acknowledgement Form. Contractors must maintain commercial general liability insurance of 2 million dollars and worker's compensation insurance of 1 million dollars. Compliance with Georgia state laws is mandatory, including E-Verify affidavits, periodic criminal history record inquiries under O.C.G.A. 35-3-34, and adherence to a smoke-free environment on school property. All work coordination and deliveries must be cleared through David Perry.
Richmond County Board of Education

POSTED

about 19 hours ago

DEADLINE

in 25 days

AI Contract Overview

Show more

The contract involves the construction of access roads, parking lots, and other paved site areas using asphalt, under the NAICS code 237310 for highway and street construction. It is issued as a subcontract by the DLA Dist San Joaquin, part of the Department of Defense, with performance required at Tracy, California, specifically at the zip code 95304-5000. The solicitation was posted on July 30, 2026, and responses are due by August 10, 2026, with no set-aside provisions specified. All work must comply with standard asphalt paving specifications for durability, safety, and site integration, and contractors are expected to manage materials, labor, and equipment to meet project timelines and quality standards at the designated location.

General Info

Asphalt paving contract for access roads and parking lots at Tracy, CA, issued by DLA San Joaquin, due August 10, 2026.

Agency

Department Of Defense → DLA DIST SAN JOAQUINView Agency

NAICS

237310 - Highway, Street, and Bridge ConstructionView NAICS

Place of Performance

TRACY, CA, 95304-5000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7L7-26-T-4508.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

SPINDLE ASSEMBLY

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA DIST SAN JOAQUIN
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Defense → DLA DIST SAN JOAQUIN
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Construction of access roads, parking lots, and paved site areas using asphalt.

More opportunities from Department Of Defense → DLA DIST SAN JOAQUIN

Same awarding agency

NAICS: 332911
New
DIBBS
VALVE, SAFETY RELIEF
Solicitation # SPE7MC-26-T-150B
The contract pertains to the procurement of eight safety relief valves identified by NSN 4820-01-560-9307 and part number 12546149, manufactured by Curtiss-Wright Electro-Mechanical Corp, classified as a critical application item. The valves must comply with all technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with the applicable revision determined by the solicitation or award date. Mercury and mercury-containing compounds are strictly prohibited in or on the hardware except for specific exempted uses such as functional components in batteries, lighting, instruments, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA; portable devices containing mercury must include shockproof construction and a secondary containment boundary per NAVSEA 5100-003D. Packaging must adhere to MIL-STD-2073-1E with code U, and marking must follow MIL-STD-129 with no special marking required. The items are to be delivered FOB origin to the specified receiving warehouse in Tracy, California, with no variance allowed in quantity and inspection and acceptance occurring at the destination. The required delivery date is 168 days from the contract date, with a target ship date of January 19, 2027, and an original delivery deadline of June 17, 2027. Transportation guidelines are referenced under DLAD Proc Notes C19 and C20, and the solicitation was issued under contract number SPE7MC-26-T-150B with a response deadline of August 3, 2026.
Industrial Valve Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332911
New
DIBBS
DISK, VALVE
Solicitation # SPE7MC-26-T-244X
Solicitation SPE7MC-26-T-244X is a fixed-price request for quotations issued by DLA Land and Maritime for the procurement of four valve disks, identified by NSN 4820-01-141-8691. The required deliverables must feature a metallic disc seating surface of 2.0 inches, utilizing NICU Alloy QN-288A for the disc material and QN-281 for the lat material. The delivery period is 207 days, with a required delivery date of April 7, 2027, to the DLA Distribution San Joaquin facility in Tracy, California. Inspection and acceptance will occur at the point of origin, and the manufacturer's inspection system must comply with ISO 9001 tailored to SAE AS9003. This procurement is subject to strict export controls under ITAR and EAR, requiring contractors to have an approved US/Canada Joint Certification Program certification and completed DLA export-control training to access technical data. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with palletization following RP001 requirements. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment. Offerors must comply with the Buy American Act and Berry Amendment, and those seeking HUBZone price evaluation preferences must be SBA-certified. Quotations are due by September 11, 2026, to the DLA Land and Maritime office in Columbus, Ohio.
Industrial Valve Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332911
New
DIBBS
VALVE, SOLENOID
Solicitation # SPE7MC-26-T-151R
The contract specifies the procurement of three solenoid valves with NSN 4810015837177 and part number W125086A, supplied by Siemens Energy Inc. and Curtiss-Wright Electro-Mechanical Corp. The item is required under solicitation SPE7MC-26-T-151R with a delivery deadline of 168 days from the contract award, to be shipped FOB origin with no tolerance for quantity variance. Inspection and acceptance occur at the destination warehouse located at 25600 S Chrisman Road, Tracy, CA 95304-5000. Packaging must comply with MIL-STD-2073-1E, including preservation method 41, dry climate control, and D3 unit containers with E5 intermediate containers, and marking must follow MIL-STD-129 with no special marking codes. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the controlling revision based on the solicitation or award date depending on acquisition size. The delivery must be completed by January 19, 2027, with an original required date of December 2, 2026. Transportation and shipping instructions follow DLAD Proc Note C19 and C20, and all packaging, marking, and handling align with DLA’s standardized procurement requirements. The point of contact is Paula McClary, reachable at fmda3302@dla.mil or 6146920417, and additional details are accessible via the DIBBS portal.
Industrial Valve Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 4 days
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 650+ contractors already using CLEATUS