Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 14 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Asphalt Rubber Chipseal Installation

Active

State & Local

Response Deadline10/14/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Asphalt Rubber Chipseal Installation involves the application of bituminous surface Stress Absorbing Membrane for prime contractors on residential street projects within the City of Yreka, California. The scope of work includes field-blending asphalt-rubber binder, applying the binder at a rate of 0.55 to 0.65 gallons per square yard using a distributor truck, and applying 3/8 inch cover material at 28 to 32 pounds per square yard. Final surface finishing must be completed using pneumatic rollers and mechanical sweeping. The selected contractor is required to provide all necessary distributor trucks and field-blending equipment to deliver the completed SAM surface. This opportunity was posted on October 8, 2026, with a response deadline of October 14, 2026. The project falls under NAICS code 237310 and is located in Yreka, zip code 96097.

General Info

Asphalt rubber chipseal installation for residential street projects in Yreka, California.

Agency

California → City of Yreka

NAICS

237310 - Highway, Street, and Bridge Construction

Place of Performance

Yreka, CA, 96097, USA

Set-Aside

NONE

Documents

This scope was carved out of 26-2025.

The full solicitation package (3 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Asphalt Rubber Chipseal Project

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 8

subcontract

Response DeadlineOct 14

Submission deadline

Response Deadline

10/14/2026, 09:00:00 PM UTCin 1 day

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyCalifornia → City of Yreka

ContactsNo contacts available

OfficeN/A

Organization / AgencyCalifornia → City of Yreka

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs installation of bituminous surface Stress Absorbing Membrane (SAM) for prime contractors on City of Yreka residential street projects. Field-blends asphalt-rubber binder, applies binder at 0.55-0.65 gal/SY via distributor truck, and applies 3/8" cover material at 28-32 lbs/SY. Finishes surfaces with pneumatic rollers and mechanical sweeping. Requires distributor truck and field-blending equipment. Delivers completed SAM surface.

Similar Contracts

Same NAICS industry code

Joliet Job Corps-Request for Quote Parking Lot and Road Repairs

Solicitation # joliet-job-corps-request-quote-parking-lot-road-repairs

Management & Training Corporation (MTC) is seeking a subcontractor for road and parking lot repairs at the Joliet Job Corps Center in Illinois. This fixed-price, single lump sum project has an estimated value between $100,000 and $250,000. The scope of work includes the replacement of 62,500 square feet of asphalt across five specific areas, including the Guard Shack, Dorm Parking Lot, West Side of Dorms, Kitchen/BCT, and Dumpster/Maintenance areas. Additionally, the contractor is responsible for repairing five storm sewer drain structures and patching five potholes using hot-mix asphalt, ensuring all work meets industry standards and proper drainage grades. Bids are due by October 21, 2026, at 3:00 PM CT and must be submitted using the MTC Bid for Lump Sum Contract form. To be considered, bidders must complete a mandatory physical site visit and provide a detailed cost breakout on company letterhead. For bids equal to or exceeding $25,000, a bid bond of 20% is required, and the awarded contractor must provide performance and payment bonds from a surety company with at least an A- rating. The project must be completed within 90 consecutive business days following the Notice to Proceed. This opportunity is set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certified firms. The contract is subject to Construction Wage Rate Requirements, necessitating weekly certified payroll and compliance with prevailing wage determinations. Payment is based on percentage of completion using AIA G702 and G703 forms, with a 10 percent retainage held until substantial completion. Final acceptance is contingent upon a successful punch list inspection and the submission of closeout documents, including a Notice of Final Completion and a Certificate of Release of Liens.

Joliet Job Corps

POSTED

about 6 hours ago

DEADLINE

Parking Lot and Access Road PavingThis subcontract, titled Parking Lot and Access Road Paving, involves performing paving and road improvements for prime contractors on Alaska State Parks facility projects. The scope of work includes the grading and paving of an access road and the expansion of an existing parking lot surface using specified materials to deliver a fully completed infrastructure improvement. The project is managed under the Alaska Department of Natural Resources and falls under NAICS code 237310. The solicitation was posted on October 12, 2026, with a response deadline of October 13, 2026.

Alaska Department of Natural Resources

POSTED

about 12 hours ago

DEADLINE

in about 10 hours

Solicitation # 49198

Solicitation 49198, Project No. 70011-1, is issued by the Alaska Department of Natural Resources, specifically the Alaska State Parks Design and Construction Section, for improvements to the Chena River SRA Upper Stiles Creek Shooting Range. The scope of work involves expanding the existing shooting range and parking lot, paving the access road and parking area, and constructing a pavilion. Technical requirements for the pavilion include unclassified excavation, the placement of Select Material Type A, and the installation of structural steel framing consisting of HSS columns, C8 framing, and W8 out lookers. Bidders must provide a bid bond equal to 5 percent of the total bid amount. A critical requirement for a responsive bid is the individual acknowledgment of all addenda. The contractor is responsible for securing all necessary permits and approvals for material sourcing; if mining from the project site, the contractor must submit a mining and reclamation plan for approval by the Division of Mining Land and Water and the Division of Parks and Outdoor Recreation, noting that the footprint of the existing pond cannot be increased. Quotes are due by October 15, 2026, at 2:00 PM prevailing time.

Alaska Department of Natural Resources

POSTED

about 12 hours ago

DEADLINE

in about 10 hours

Bituminous Paving and Road Restoration

City of Saint Paul

POSTED

about 14 hours ago

DEADLINE

Asphalt Milling and Repaving ServicesThis subcontract for Asphalt Milling and Repaving Services involves performing specialized roadway work for prime contractors on projects within the City of Social Circle, Georgia. The scope of work includes milling existing asphalt to a thickness of 2 inches, performing deep patch milling at a 4-inch depth, and installing 9.5mm Superpave Type 2 asphalt for both patching and new inlay. To ensure quality and compliance, the contractor is responsible for conducting roll testing of the pavement subgrade and adhering strictly to GDOT standards for all testing and installation processes. The ultimate objective of the contract is the delivery of a fully completed and resurfaced roadway.

City of Social Circle

POSTED

about 16 hours ago

DEADLINE

Dove Landing Phase 1 Milling and Paving

Solicitation # PE-66276-NONST-2027-000000030

The City of Social Circle is soliciting bids for the Dove Landing Phase 1 Milling and Paving project located off Vine Circle in Social Circle, Georgia. The scope of work includes furnishing all materials, labor, tools, and equipment for contract milling and repaving at a 2-inch thickness, with 4-inch deep patch milling using 9.5mm Superpave Type 2 asphalt. Additional requirements include concrete curb and gutter replacement, driveway cut and repair using minimum 5-inch 3000psi concrete per GDOT Standard Spec 430, and up to 2,100 linear feet of permanent grassing. The contractor is responsible for roll testing the pavement subgrade after milling, with a maximum of three calendar days allowed between milling and resurfacing. A standard one-year warranty is required upon completion, and the project is intended for completion during the current season. Bids must be submitted to Robbie Groves at the City of Social Circle by 2:30 p.m. on Thursday, October 15, 2026, with a public opening following at 2:40 p.m. The bid packet must include a bid form, a notarized Contractor Affidavit verifying E-Verify compliance, and a bid bond for 5 percent of the total bid amount, though cash, cashier's checks, or irrevocable letters of credit are acceptable. An informational Certificate of Insurance is required at the time of bidding, while the awarded contractor must provide proof of workers compensation and liability insurance naming the City of Social Circle as an additional insured, along with performance and payment bonds equal to 100 percent of the contract price. The City reserves the right to waive informalities and award the project to the bidder deemed to be in the best interest of Social Circle within 45 days of the bid opening.

City of Social Circle

POSTED

about 16 hours ago

DEADLINE

Asphalt PavingThis subcontract for asphalt paving involves performing pavement reconstruction and asphalt surfacing for prime contractors on street improvement projects within the City of Norco, California. The scope of work includes the removal of existing asphalt concrete pavement and subgrade, the installation of six inches of Class 2 Aggregate Base, and the application of asphalt concrete surfacing to deliver a completed street surface. The project is categorized under NAICS code 237310 and is located in Norco, zip code 92860. Interested parties must submit their responses by the deadline of November 4, 2026, at 8:00 PM.

POSTED

about 18 hours ago

DEADLINE

Hillside Avenue Street Improvements Project Third Street To Fourth Street

Solicitation # Bid_Hillside_Avenue_Street

The City of Norco is soliciting bids for the Hillside Avenue Street Improvements Project, located between Third Street and Fourth Street in Norco, California. The scope of work includes pavement reconstruction, installation of curb and gutter, curb ramps, catch basins, and an equestrian trail. Additional requirements involve general grading, unclassified excavation, backfill, the relocation of twelve bollards, and the installation of signage and thermoplastic pavement markings. All work must adhere to ADA guidelines, the California Manual of Uniform Traffic Control Devices, and specific compaction standards requiring 95 percent relative compaction for asphalt concrete and subgrade. Bids must be submitted via the City of Norco's Bid and Vendor Portal by November 4, 2026. To be deemed responsive, proposals must include all bid unit prices for additive alternates and be executed in accordance with state and federal laws. The successful bidder must hold a valid State of California Contractor's License and provide bid, performance, and payment bonds. The project must be completed within sixty working days from the Notice to Proceed, which is contingent upon the approval of a procurement schedule for major equipment and the submission of a traffic control plan ten working days prior to construction. Compliance with California Prevailing Wage Laws and Workers' Compensation insurance is mandatory.

POSTED

about 18 hours ago

DEADLINE

Construction On State Highway In Sonoma County Near Boyes Hot Springs From Donald Street To 0.1 Mile South Of Lomita Avenue

Solicitation # 04-3Y7104

California Department of Transportation

POSTED

about 18 hours ago

DEADLINE

Construction On State Highway In Del Norte County At Smith River From Rowdy Creek Bridge To 0.1 Mile North Of Fred Haight Drive

Solicitation # 01-0M8504

California Department of Transportation

POSTED

about 18 hours ago

DEADLINE

Construction On State Highway In Sonoma County At Sears Point On Route 37 From 0.2 Mile West Of Route 121 To 0.9 Mile East Of Tolay Creek Bridge And On Route 121 From Route 37 To 0.2 Mile North Of Route 37

Solicitation # 04-1Q76U4

STATE OF CALIFORNIA DEPARTMENT OF TRANSPORTATION

POSTED

about 18 hours ago

DEADLINE

in about 1 month

Construction On State Highway In San Bernardino County Near Needles At Various Locations From 0.3 Mile West Of Woods Wash Bridge To Homer Wash Bridge

Solicitation # 08-1L8004

California Department of Transportation

POSTED

about 18 hours ago

DEADLINE

in about 1 month

More opportunities from California → City of Yreka

Same awarding agency

Fog Seal ApplicationThis subcontract opportunity involves the application of fog seal for prime contractors working on residential street projects within the City of Yreka, California. The selected provider will be responsible for delivering a finished fog seal surface, utilizing a bituminous distributor to apply the seal as a secondary treatment following the chipseal process. The project falls under NAICS code 237310 and requires strict compliance with California prevailing wage laws. Interested parties must submit their responses by the deadline of October 14, 2026.

Highway, Street, and Bridge Construction

POSTED

DEADLINE

Sand Cover Material Supply and InstallationThis subcontract opportunity with the City of Yreka in California involves the supply and installation of sand cover material for residential street projects. The selected contractor will be responsible for providing and spreading sand cover across treated chipseal surfaces to support prime contractors. The project is located in Yreka, California, under NAICS code 238990. Interested parties must submit their responses by the deadline of October 14, 2026.

All Other Specialty Trade Contractors

POSTED

DEADLINE

Hot Pre-Coated Aggregate SupplyThis subcontract for the City of Yreka involves the supply and delivery of hot pre-coated 3/8 inch aggregate for use by prime contractors on chipseal projects. The provider is responsible for ensuring the aggregate is maintained at specific temperatures between 225°F and 325°F at the time of application, which necessitates the use of specialized heating and transport equipment. The project is located in Yreka, California, and falls under NAICS code 212321. Interested parties must submit their responses by the deadline of October 14, 2026.

Construction Sand and Gravel Mining

POSTED

DEADLINE

Asphalt Rubber Chipseal Project

Solicitation # 26-2025

Solicitation 26-2025 is a request for proposals from the City of Yreka, California, for an Asphalt Rubber Chipseal Project. The scope of work involves installing a bituminous surface Stress Absorbing Membrane (SAM) on various residential streets, consisting of a single application of field-blend asphalt-rubber binder and hot pre-coated 3/8 inch aggregate. The project requires specific technical adherence, including aggregate temperatures between 225 and 325 degrees Fahrenheit and the use of pneumatic rollers for finishing. The City of Yreka will handle existing pavement maintenance, such as patching and crack sealing, while the contractor is responsible for all materials, labor, and equipment. The project must be completed within 90 working days. The contract will be awarded to the lowest bidder based on the Total Base Bid price. Bids are due by 2:00 PM on October 14, 2026, and must be submitted in a sealed envelope to Yreka City Hall. Required submission documents include a bid proposal, a revised bid schedule, a bid bond for at least 10 percent of the proposal amount, and a signed experience statement including license details. The successful contractor must provide performance and payment bonds at 100 percent of the bid amount and a maintenance bond at 50 percent. Payment will be made via progress payments submitted on the 25th of each month, subject to a 5 percent retention. This is a public works project requiring compliance with California prevailing wage laws and various state and federal environmental regulations.

Highway, Street, and Bridge Construction

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS