Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

ASTM-B21 Alloy C46400 Material Supply

Active

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the procurement and supply of certified ASTM-B21 Alloy C46400 raw material intended for the production of stuffing box plugs. The materials are destined for prime contractors working on projects for the Department of the Navy under the Navsup Weapon Systems Support Mech agency. A critical requirement of the contract is the provision of full material traceability and certifications that strictly adhere to ASTM-B21 specifications. The performance of this contract is centered in Mechanicsburg, Pennsylvania, and falls under NAICS code 336992. The primary objective is the delivery of certified stock that meets all technical standards to ensure the integrity of the weapon systems components being manufactured.

General Info

Supply certified ASTM-B21 Alloy C46400 raw material for Navy stuffing box plugs.

Agency

Department Of The Navy → Navsup Weapon Systems Support Mech

NAICS

336992 - Military Armored Vehicle, Tank, and Tank Component Manufacturing

Place of Performance

MECHANICSBURG, PA, 17050-2411, USA

Set-Aside

NONE

Documents

This scope was carved out of N0010425QFB40.

The full solicitation package (3 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

STUFFING BOX ASSEMB

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 15

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of The Navy → Navsup Weapon Systems Support Mech

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of The Navy → Navsup Weapon Systems Support Mech

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies certified raw material for the stuffing box plug for prime contractors on Navsup Weapon Systems Support Mech projects. Sources and supplies ASTM-B21 Alloy C46400 raw alloy material. Provides full material traceability and certifications per ASTM-B21 specifications. Delivers certified ASTM-B21 Alloy C46400 stock.

Similar Contracts

Same NAICS industry code

Rear Step Assembly ManufacturingThis subcontract involves the fabrication and assembly of one Rear Step Assembly for the Department of Defense under the DLA Weapons Support LSO Combat Vehicles and Armament project. The contractor is responsible for performing metal fabrication, bending, and welding for part number 4298895, ensuring all work strictly adheres to BAE Systems and AMZ Alabama specifications as well as the DLA Master List of Technical and Quality Requirements RA001. A critical restriction of this contract is the absolute prohibition of additive manufacturing. The project falls under NAICS code 336992 and requires the delivery of a single, fully completed and inspected assembly. The response deadline for this opportunity is October 29, 2026.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 24 hours ago

DEADLINE

Solicitation # SPE7L4-27-T-0452

Solicitation SPE7L4-27-T-0452 is a fixed-price procurement issued by the DLA Weapons Support LSO Combat Vehicles and Armament for one Rear Step Assembly, identified by NSN 4210015669748 and part number 4298895. The requirement is associated with BAE Systems Land & Armaments L.P. and AMZ Alabama Inc. The original required delivery date is October 22, 2026, with a delivery window of 20 days after receipt of order. The item is to be shipped via freight forwarder DF Young in Maryland to the Egyptian Ministry of Defense in Cairo, Egypt. Inspection and acceptance are both designated to occur at the point of origin. The contract mandates strict adherence to MIL-STD-129 for marking and MIL-STD-2073-1E for packaging, with specific requirements for packing level B and pack code Q. Palletization must comply with DLA packaging requirement RP001. Administrative requirements include the use of the Wide Area Workflow system for invoicing and payment. Offerors must comply with the Buy American and Balance of Payments Program and are prohibited from using additive manufacturing for the produced items. Quotations are due by October 29, 2026, and must include all necessary representations and certifications, including UEI and CAGE codes, and SAM registration.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 24 hours ago

DEADLINE

ARMOR, TRANSPARENT, VEHI

Solicitation # SPE7L3-27-T-0998

Solicitation SPE7L3-27-T-0998, issued by the DLA Weapons Support Land Supplier Operations Vehicle Support, is for the procurement of 10 units of transparent vehicular armor windows (NSN 2541-01-600-2081). This is a restricted source item requiring engineering source approval from the Government design control activity. The contract specifies a delivery period of 158 days with a need ship date of April 6, 2027, and a final required delivery date of March 10, 2028. Delivery is FOB Origin to the DLA Distribution Barstow Central Receiving Warehouse in California. The contractor must adhere to strict quality and technical standards, including ISO 9001:2015 certification and the provision of a Certificate of Quality Compliance for each manufacturing lot. Packaging must follow MIL-STD-2073-1E and RP001, with specific requirements for protective films on window glass and volatile corrosion inhibitor wrapping for cables. Marking must comply with MIL-STD-129. Due to the nature of the item, the contract involves export-controlled technical data subject to ITAR or EAR regulations and references classified drawing DTA184044. Compliance with the Buy American Act, Berry Amendment, and DFARS cybersecurity standards is required, and all invoicing must be processed through the Wide Area Workflow system.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 24 hours ago

DEADLINE

BRACKET, VEHICULAR BUMP

Solicitation # SPE7L1-27-U-0090

Solicitation SPE7L1-27-U-0090 is an Indefinite Delivery Contract issued by the DLA Weapons Support Land Supply Chain for the procurement of vehicular bumper brackets, identified by NSN 2541016006803. The requirement is for an estimated quantity of 9 units with a delivery window of 140 days after order. The contract is categorized under NAICS code 336992 and is being issued under the First Destination Transportation program with FOB Origin terms. Inspection and acceptance will occur at the destination. The contractor must adhere to strict packaging and marking standards, including ASTM D3951 and MIL-STD-129, with DLA Master List requirements and RP001 palletization standards taking precedence. Compliance with the Berry Amendment and Buy American Act is required, and offerors must provide a CMMC Level 2 self-assessment. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow system. Award evaluation is based on the price quoted for the estimated annual demand, and the buy is identified as a candidate for automated award.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 24 hours ago

DEADLINE

NIJ-Certified Body Armor SupplierThis subcontract agreement establishes a partnership for the supply of ballistic armor panels to prime contractors supporting protective equipment projects for the City of St. Joseph, Missouri. The supplier is required to manufacture armor models that strictly adhere to NIJ Standard-0101.06 and must provide formal NIJ Compliance Letters for all deliverables. All materials must be certified under the NIJ Compliance Testing Program to ensure maximum safety and performance standards. The contract stipulates that all supplied units must be in new, never worn condition and include a minimum five-year warranty against defects. Key deliverables include the NIJ-certified ballistic armor panels and the corresponding compliance documentation. Interested parties should note the response deadline of November 5, 2026, for this procurement opportunity.

City Of St. Joseph

POSTED

DEADLINE

CYLINDER ASSEMBLY, ACTU

Solicitation # SPE7L1-27-T-0204

Solicitation SPE7L1-27-T-0204 is a fixed-price request for quotations issued by DLA Land and Maritime, Land Supply Chain, for the procurement of two linear actuating cylinder assemblies, identified by NSN 2530-01-269-3796 and Grove U.S. LLC part number 6-372-003093. This procurement is a total small business set-aside under NAICS code 336992. The required delivery date is October 1, 2026, with a delivery timeframe of five days after order. Items are to be delivered FOB Origin to the W6F7 Supply Division at Fort Irwin, California. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, which takes precedence over ASTM D3951 commercial packaging standards. All packaging must be marked and labeled per MIL-STD-129, and palletization must follow RP001 requirements. Hazardous materials must be packaged according to TQ requirement IP025 and labeled per the Hazard Communication Standard. Additionally, the contract prohibits the use of Class I ozone-depleting chemicals and requires compliance with the Buy American Act and Berry Amendment. Invoicing and receiving reports must be submitted electronically via the Wide Area WorkFlow system.

LAND SUPPLY CHAIN

POSTED

DEADLINE

SUPPORT, RETRACTABLE, TR

Solicitation # SPE7L3-27-T-0965

Solicitation SPE7L3-27-T-0965 is a total small business set-aside issued by the DLA Weapons Support Land Supplier Operations Vehicle Support for the procurement of retractable trailer supports, identified by NSN 2590-01-484-0440. The requirement consists of a total quantity of 374 units across two line items, with a delivery period of 168 days after order. Delivery is established as FOB Origin, with shipping destinations including DLA Distribution centers in Albany, Georgia, and New Cumberland, Pennsylvania. Inspection and acceptance will occur at the origin, and the manufacturer's inspection system must comply with SAE AS9003 or ISO 9001. The contract is subject to stringent technical and security requirements, including the use of QPL/QML components and adherence to the DLA Master List of Technical and Quality Requirements. Due to the nature of the technical data, the contract is subject to ITAR and EAR export controls, requiring offerors to possess an approved US/Canada Joint Certification Program certification. Additionally, the contract mandates compliance with CMMC Level 2 and DFARS 252.204-7012 for safeguarding covered defense information. Packaging and marking must strictly follow MIL-STD-129 and MIL-STD-2073-1E, and all invoicing must be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

ARMOR, SUPPLEMENTAL,

Solicitation # SPE7L1-27-T-1636

Solicitation SPE7L1-27-T-1636 is a fixed-price request for quotations issued by the DLA Weapons Support Land Supply Chain for the procurement of one unit of supplemental small arms fragmentation protective armor, identified by NSN 2540-01-573-7503 and Foster-Miller part number 80931123. The requirement is categorized under NAICS code 336992. Delivery is required within 10 days after receipt of order, with an original required delivery date of July 2, 2026. Shipping terms are FOB Origin, with inspection and acceptance occurring at the destination in Fort Hood, Texas. The contract mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-129 and RP001, with non-hazardous materials following ASTM D3951 and hazardous materials following TQ requirement IP025. Key compliance requirements include a CMMC Level 2 Self-Assessment, safeguarding of covered defense information, and adherence to the Buy American and Balance of Payments Program. All quotes must be submitted via the DIBBS system, and the successful contractor is required to use the Wide Area WorkFlow system for electronic invoicing and payment requests.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE7L3-27-T-0947

Solicitation SPE7L3-27-T-0947 is a total small business set-aside issued by the Department of Defense, specifically the DLA Weapons Support Land Supplier Operations Vehicle Support, for the procurement of 115 units of M1 Tank Racks (NSN 2590-01-496-4092). The items must be produced according to several specific reference drawings and standards, including MS27183L(1) and NASM17984. Delivery is required within 168 days, with a need ship date of April 13, 2027, and a final required delivery date of May 16, 2027, to DLA Distribution Red River in Texarkana, Texas. The contract is issued under the First Destination Transportation program, and the FOB point is origin. The procurement is subject to strict export controls under ITAR and EAR regulations, requiring contractors to have approved US/Canada Joint Certification Program certification and specific DLA training to access technical data. Quality assurance requires manufacturer inspection systems to comply with SAE AS9003 or ISO 9001. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with hazardous materials labeled per 29 CFR 1910.1200. All quotes must be submitted via the DIBBS portal, and invoicing must be processed through the Wide Area WorkFlow system. The solicitation also mandates compliance with the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 for safeguarding covered defense information.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Solicitation # SPE7L1-27-T-1651

Solicitation SPE7L1-27-T-1651 is a fixed-price procurement issued by the DLA Weapons Support Land Supply Chain for the supply of one shield, identified by NSN 2590011791064. The item must be manufactured in accordance with Basic Drawing NR 19207 10871259 and adheres to specialty metal requirements per DFARS 252.225-7008, 252.225-7009, and 252.225-7010 if the award exceeds the Simplified Acquisition Threshold. Delivery is required within 20 days of award, with an original required delivery date of August 13, 2026. The shipment is designated FOB Origin and is destined for the US Army APS 2 2 SSA 405 AFSB in Powidz, Poland. Inspection and acceptance will occur at the point of origin. Packaging must comply with ASTM D3951 and RP001 DLA Packaging Requirements, while marking and labeling must follow MIL-STD-129. The contract incorporates the DLA Master List of Technical and Quality Requirements, which take precedence over other packaging standards. Evaluation includes a price preference for certified HUBZone small businesses, and the use of additive manufacturing is prohibited unless specifically authorized. Invoicing and payment are to be processed electronically via the Wide Area Workflow system.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

NIJ Level IIIA Ballistic Combat HelmetsThis subcontract involves the procurement of 30 brand new, high-cut NIJ Level IIIA ballistic combat helmets in black for prime contractors supporting US Embassy San Salvador projects. The equipment must adhere to NIJ 0106.01, NIJ 0108.01, and U.S. Army AR/PD 10-02 standards, and must include Ops-Core FAST SF Next Generation Headborne Systems or an equivalent alternative featuring ARC rails and night-vision mounts. The contract requires strict adherence to NIJ certification and verification that the products are of non-PRC origin. Performance will take place in Antiguo Cuscatlan, with the final deliverable being 30 fully completed helmets. The solicitation was posted by the Department of State on October 15, 2026, with a response deadline of October 26, 2026.

US Embassy San Salvador

POSTED

DEADLINE

Precision Component/Material SupplierThis subcontract opportunity is issued by the Department of Defense under the DLA Weapons Support Strategic Acquisition Program Directorate. The selected supplier will provide high-grade alloys or polymers, specifically for NSN 3010-01-532-4923, in the form of raw materials or machined blanks. These precision components are intended for prime contractors fulfilling DLA Weapons Support contracts. The contract is designated as a Total Small Business Set-Aside under FAR 19.5, falling under NAICS code 336992. A critical requirement for this engagement is the provision of Mill Test Reports that certify the materials are free from mercury and Class I ozone-depleting chemicals. The response deadline for this solicitation is October 29, 2026.

DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

More opportunities from Department Of The Navy → Navsup Weapon Systems Support Mech

Same awarding agency

BALL KIT, CERAMIC — 4820016188385 — N0010426QFD00

Solicitation # N0010426QFD00

This solicitation issued by NAVSUP Weapon Systems Support Mechanicsburg is for the teardown, evaluation, repair, and modification of a Ceramic Ball Kit (NSN 4820-01-618-8385). The material is designated as Special Emphasis Level I, Scope of Certification, or Quality Assured because it is used in crucial shipboard systems where failure could result in serious personnel injury, loss of life, or loss of the vessel. The contractor must provide a single award based on a combination of technical acceptability and past performance, which is weighted as more important than price. Delivery is required within 30 days on a FOB Destination basis. Technical requirements mandate strict adherence to Naval Ship Systems Command drawings and specific material standards, including the use of centrifugally cast 6AL-4V or ASTM-B381 for balls and MC903 cast nylon for seats. The contractor must maintain a quality system compliant with ISO-9001 or MIL-I-45208 and ensure full traceability via Material Identification and Control codes. Key deliverables include a Certificate of Compliance and test certifications submitted via Wide Area Workflow for review and acceptance by the Portsmouth Naval Shipyard prior to shipment. Packaging must comply with MIL-STD-2073 and MIL-STD-129, with specific requirements for wood packaging materials and item unique identification.

Ball and Roller Bearing Manufacturing

POSTED

DEADLINE

SET SCREW — 5305014815095 — N0010427QBB20

Solicitation # N0010427QBB20

Solicitation NO0014-27-Q-BB20 is a Request for Quotations issued by NAVSUP Weapon Systems Support MECH for the procurement of set screws, identified by NSN 5305-01-481-5095. The government intends to award the contract to the responsible offeror providing the lowest priced, technically acceptable offer. Technical and quality requirements are governed by the Individual Repair Part Ordering Data, drawings, and military specifications available through the BPMI e-commerce website. In the event of a conflict, Section C of the contract takes precedence over Section D. The contractor is required to maintain a government-acceptable inspection system and submit all Reports of Test and Inspection electronically via the Wide Area Workflow platform. Strict adherence to packaging and marking standards is mandatory, specifically MIL-STD-2073-1 for preservation and MIL-STD-129 for marking, with labels reflecting the nomenclature cited in the IRPOD. Any departures from product definitions require an approved Request for Variance, and the intentional use of mercury is prohibited. Delivery is expected within 180 days, with inspection and acceptance occurring at the origin.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

TRANSMITTER,PRESSUR — 6685014851288 — N0010426QUC50

Solicitation # N0010426QUC50

Solicitation NO0014-26-Q-UC50 is a request for quotations issued by NAVSUP Weapon Systems Support Mech for the manufacture and procurement of a Pressure Transmitter, NSN 6685-01-485-1288. The required item must conform to the design represented by Cage Code 81349, reference number 89DSW60PSID3002, and must be produced by offerors whose products are approved for inclusion on Qualified Products List 24304. Award will be granted to the responsible offeror providing the lowest priced, technically acceptable offer, with evaluations considering item, price, and supplier risk via the Supplier Performance Risk System. The contract mandates strict adherence to quality and technical standards, including physical identification per MIL-STD-130 Rev N and IUID requirements under DFARS 252.211-7003. Packaging must comply with MIL-STD-2073, with specific levels for domestic and overseas shipments and specialized requirements for electrostatic discharge protection and oxygen cleaning. Inspection and acceptance will occur at the origin, though Government Source Inspection is required, and contractors must maintain inspection records for 365 days following final delivery. Deliverables are expected within 365 days, with a minimum procurement delivery lead time of 90 days. Offerors who are not the original equipment manufacturer must provide proof of authorized distributorship. Administrative requirements include electronic invoicing through the Wide Area Workflow system and registration in the System for Award Management. The solicitation also incorporates various FAR and DFARS clauses regarding cybersecurity, hazardous material identification, and Buy American preferences.

Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

DEADLINE

SEAL — 4320015028298 — N0010427QJA16

Solicitation # N0010427QJA16

Solicitation N0010427QJA16, issued by the Navsup Weapon Systems Support Mech, is a fixed-price request for quotations for the teardown, evaluation, and repair of a SEAL (NSN 4320-01-502-8298). The contractor is required to perform all work in accordance with approved repair standards, technical orders, and TDP Version 006, ensuring the final product meets all operational and functional requirements. A critical performance metric is the Repair Turnaround Time (RTAT) of 35 days, measured from the physical receipt of the asset to the date of acceptance. The government intends to make a single award based on the most advantageous offer, with past performance weighted as more important than price. The contract mandates strict quality assurance and packaging standards, including physical identification per MIL-STD-130 and preservation according to MIL-STD-2073-1 for OCONUS shipments or ASTM D3951-18 for CONUS shipments. Contractors are responsible for all inspections, though the government reserves the right to perform its own oversight. Administrative requirements include the use of the Wide Area Workflow system for invoicing and compliance with various DFARS and FAR clauses regarding cybersecurity, hazardous materials, and domestic preferences. Quotations are due by October 26, 2026, and must be submitted by authorized distributors of the original manufacturer.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

STEERING WHEEL — 2030013160764 — N0010427QJA19

Solicitation # N0010427QJA19

Solicitation N0010427QJA19 is a firm-fixed-price request for quotation issued by the Department of the Navy, Navsup Weapon Systems Support Mech, for the teardown, evaluation, repair, and modification of a steering wheel, identified by NSN 2030-01-316-0764. The contractor must ensure the repaired item meets the operational and functional requirements of CAGE Code 03956, Reference No. 1977616, utilizing original manufacturer specifications and drawings. A key performance requirement is a Repair Turnaround Time of 80 days from the physical receipt of the asset to the date of acceptance. Government Source Inspection is required, and acceptance will occur at the origin. The contract mandates strict adherence to quality and marking standards, including MIL-STD-130 for physical identification and MIL-STD-2073-1 for preservation and packaging. All invoicing must be processed electronically via Wide Area Workflow. Evaluation of offerors will be conducted through the Supplier Performance Risk System, focusing on item and price risk. Prospective contractors must be authorized distributors of the original manufacturer and provide signed proof on company letterhead. Quotations must include total pricing and confirmed turnaround times, with a response deadline of November 02, 2026.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

PUMP UNIT,CTFGL — 4320015758318 — N0010427QJA17

Solicitation # N0010427QJA17

This fixed-price solicitation, issued by NAVSUP Weapon Systems Support Mechanicsburg, seeks quotations for the teardown, evaluation, repair, and modification of a Pump Unit, CTFGL (NIIN 015758318). The government requires a repair turnaround time of 35 days, measured from the date of asset return to the date of final acceptance. All repair work must adhere to the contractor's standard overhaul practices and approved technical directives, with physical identification and packaging complying with MIL-STD-130 and MIL-STD-2073, respectively. Government Source Inspection is mandatory, and final acceptance must be obtained within the established turnaround timeframe. The award will be made to a single, technically acceptable offeror determined to be most advantageous to the government, with past performance weighted as more important than price. Eligible respondents must be authorized distributors of the original manufacturer and provide proof of such status on company letterhead. The contract incorporates several critical federal regulations, including a DO priority rating for national defense, DFARS cybersecurity requirements for safeguarding covered defense information, and strict adherence to the Buy American and Trade Agreements certificates. Invoicing and payment must be processed electronically through the Wide Area Workflow system.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

HYDROGEN,REACTOR GR — 6830001805919 — N0010427QBB30

Solicitation # N0010427QBB30

Solicitation N0010427QBB30 is a fixed-price request for quotations issued by the Department of the Navy, NAVSUP Weapon Systems Support Mechanicsburg, for the procurement of Hydrogen Reactor GR (NSN 6830-00-180-5919). The requirement is governed by Technical Data Package version 027 and mandates strict adherence to the Individual Repair Part Ordering Data (IRPOD) for quality assurance and inspection. A critical component of this contract is the requirement for production lot testing, with certified reports of test and inspection, including Form DD-1222, to be submitted to NAVSUP-WSS Code N9433 and samples delivered to Puget Sound Naval Shipyard. The contract emphasizes rigorous packaging and marking standards, requiring compliance with MIL-STD-2073-1 for preservation and MIL-STD-129 for marking, including specific requirements for Item Unique Identification (IUID) and Depot Level Repairable (DLR) labels. Because the material is hazardous, the contractor must provide Safety Data Sheets and GHS-compliant labels per FAR 52.223-3. Award will be granted to the responsible offeror with the lowest priced, technically acceptable offer, with a 10 percent price evaluation preference applied to HUBZone small business concerns. Inspection and acceptance are designated at the origin.

Industrial Gas Manufacturing

POSTED

DEADLINE

SPACER,SPECIAL SHAP — 5365014198911 — N0010427QBA04

Solicitation # N0010427QBA04

This solicitation, issued by NAVSUP Weapon Systems Support Mech, is for the procurement of a Special Shape Spacer (NSN 5365-01-419-8911, Part Number 803-2177142-5XX-74) under a fixed-price contract. The award will be based on the lowest priced, technically acceptable offer, with a 10 percent price evaluation preference granted to HUBZone small business concerns. Technical compliance is governed by Technical Data Package version 008 and drawing 803-2177142, with a strict prohibition on the intentional addition of mercury. The delivery timeline is set for 180 days, with terms established as FOB Destination. Contractors must adhere to rigorous quality assurance and packaging standards, specifically MIL-STD-2073-1 for preservation and MIL-STD-129 for marking and labeling. Items must be marked with the nomenclature SPACER and include the 13-digit contract order number and CLIN. A critical deliverable is the submission of a Certificate of Compliance per DI-MISC-81356 at the time of material delivery. Inspection and acceptance will occur at the origin. Additionally, the contractor must comply with cybersecurity requirements under DFARS 252.204-7012 and provide CMMC unique identifiers in their proposal.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Supply of Critical Safety Item (CSI) Socket Head Cap ScrewsThis subcontract involves the supply of high-strength, certified socket head cap screws, identified by NIIN 016330288, for prime contractors supporting US Navy NAVSUP Weapon Systems Support projects. The contractor is responsible for manufacturing or sourcing these critical safety items in strict accordance with TDP Version 002, ensuring full material traceability and the implementation of Special Emphasis Level I Scope of Certification. Compliance requirements include adherence to FAR 52.246-11 and mandatory registration in the ECDS system using a PKI Digital Certificate. All certified screws and accompanying Level I quality certifications must be delivered to the Portsmouth Naval Shipyard. The contract is managed under NAICS code 332722 with performance associated with the Mechanicsburg location.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

Repair and Certification of External JA FittingsThis subcontract, titled Repair and Certification of External JA Fittings, is issued by the Department of the Navy under the Navsup Weapon Systems Support Mech agency. The project focuses on the repair and restoration of external JA fittings for prime contractors on US Navy projects, with performance taking place in Mechanicsburg. The scope of work involves the teardown, evaluation, and inspection of items to restore them to like new or A condition in strict accordance with restricted-access technical drawings. The contractor is responsible for utilizing precision machining and inspection tools to conduct Beyond Economic Repair and Beyond Repair analysis. The final deliverables for this contract include either certified repaired fittings or formal determinations that the items are beyond repair or beyond economic repair. The work is categorized under NAICS code 811210.

Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

Supply of External JA Fittings (NIIN 014154757)This subcontract, managed by the Navsup Weapon Systems Support Mech for the Department of the Navy, involves the procurement of external JA fittings under NIIN 014154757. The selected provider is responsible for manufacturing or sourcing these fittings in strict accordance with restricted-access drawings and QPL 24403 standards. To ensure mission readiness and safety, all delivered hardware must achieve Quality Assured status and meet Special Emphasis Level I certification. The contract requires that all components be obtained through QPL-approved sourcing to maintain rigorous quality control. Performance for this requirement is centered in Mechanicsburg, Pennsylvania, with the primary objective being the delivery of physical hardware fittings to prime contractors supporting US Navy procurement projects.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Fluid Filter Head Manufacturer/SupplierThis subcontract involves the manufacture and supply of specialized Fluid Filter Heads, identified by NSN 4330-01-421-2626, for prime contractors supporting US Navy shipboard system projects. The Department of the Navy, specifically through Navsup Weapon Systems Support Mech in Mechanicsburg, requires the parts to be produced according to Special Emphasis material Level I Scope Of Certification. Key technical requirements include IUID marking in accordance with MIL-STD-130 and strict compliance with CSI standards and FAR 52.246-11. Each delivered filter head must be accompanied by a Special Emphasis Certificate of Conformance to verify that all quality and material specifications have been met.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS