Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

ATTACHMENT

Active
SPEFA5-26-T-0965Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract, issued by the Defense Logistics Agency under solicitation number SPEFA5-26-T-0965, requires the delivery of three units of part number 1560-LL-NCB-5916, identified as a critical application item for Bell Textron Inc, to be delivered FOB destination within 62 days of contract award, with no quantity variance allowed. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with specific adherence mandated to MIL-STD-130N for identification marking, MIL-STD-1916 or ASQ H1331 for sampling procedures, and MIL-STD-129 for packaging and labeling, superseding ASTM D3951 where applicable. Packaging must comply with DLA’s RP001 standards, including palletization and unit packaging as specified, and all items must be marked and labeled accordingly with the correct unit of issue and quantity per unit pack. Inspection and acceptance occur at the destination, with zero non-conformances required in sampled lots unless otherwise directed, and verification levels are strictly aligned with specified critical, major, and minor attributes. The material has no shelf life requirement, and delivery must reach the designated freight address at Cherry Point, North Carolina, with parcel post instructions provided as a secondary point of contact. The contract is governed by the DLA’s procurement framework, and all referenced military standards, sampling plans, and packaging directives take precedence over general commercial guidelines. The point of contact is Tanya Whitney, and the contract is active with a response deadline in August 2026 and an original required delivery date of November 12, 2026.

General Info

Deliver three critical part units FOB destination within 62 days, compliant with MIL-STD and DLA packaging standards to Cherry Point, NC.

Agency

Department Of Defense → DLA FLEET READINESS CENTER DLA PSCView Agency

NAICS

488190 - Other Support Activities for Air TransportationView NAICS

Place of Performance

PSC 8021, CHERRY POINT, NC, 28533-0021, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA FLEET READINESS CENTER DLA PSC
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → DLA FLEET READINESS CENTER DLA PSC
View Agency Profile
Office AddressUS
Contacts
Tanya Whitney
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
ATTACHMENT
ATTACHMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
MIL-STD-130N(1) DATED 16 NOV 2012.
IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
THIS MATERIAL DOES NOT HAVE A SHELF LIFE REQUIREMENT
CRITICAL APPLICATION ITEM
BELL TEXTRON INC 97499 P/N 212-030-164-85
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPEFA5-26-T-0965
SECTION B
PR: 7017675983 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017675983 0001 EA 3.000
NSN/MATERIAL:1560LLNCB5916
DELIVERY (IN DAYS):0062
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
N01DLA
FLEET READINESS CENTER DLA
PSC 8021
CHERRY POINT NC 28533-0021
US
FREIGHT SHIPPING ADDRESS:
N01DLA
FLEET READINESS CENTER DLA
BEACHEY ROAD, BUILDING 148, BAY C
CHERRY POINT NC 28533-5040
US
Need Ship Date:00/00/0000 Original Required Delivery Date:11/12/2026
SPEFA5-26-T-0965 NSN/Part Number: 1560-LL-NCB-5916 Quantity: 3 EA Purchase Request: 7017675983QTY: 3 Delivery: 62 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 488190
New
DIBBS
INSERT
Solicitation # SPEFA5-26-T-0962
The contract pertains to the procurement of 8 units of item NSN 5325-LL-NCC-3569 with part number R1388P115, supplied by approved vendors including Groov-Pin Corporation of Georgia, Inc. and General Electric Company. The delivery must be completed within 17 days of award, with FOB destination as the delivery point and inspection and acceptance occurring at the destination. The quantity is strictly fixed with zero variance permitted. All items must be packaged in accordance with ASTM D3951 and marked and labeled per MIL-STD-129, with palletization strictly following DLA’s RP001 Packaging Requirements, which take precedence over any other standard. The DLA Master List of Technical and Quality Requirements governs all technical and quality specifications, including sampling protocols, which require zero non-conformances under MIL-STD-1916 or ASQ H1331 unless otherwise specified, and attributes must be verified at designated levels or AQLs. The item has no shelf life requirement. The contract is issued under solicitation SPEFA5-26-T-0962 with a required delivery date of July 27, 2026. Deliveries must be shipped to the designated freight address in Cherry Point, NC, or sent via parcel post to the specified PSC address. The unit of issue is each, with a total price of $8.00 per unit. All requirements are tied to the version of the DLA Master List in effect at the time of solicitation issuance, and compliance with DoD unit of issue standards is mandatory.
DLA FLEET READINESS CENTER DLA PSC

POSTED

about 9 hours ago

DEADLINE

in 8 days
View Details
NAICS: 488190
New
DIBBS
PIN-RIVET
Solicitation # SPE4A6-26-T-10HJ
This contract pertains to the procurement of PIN-RIVET components identified by NSN 5320-01-623-5442 and part number ST3M759C6-18, with a quantity of 41 units at a unit price of $41.00, totaling $1,681.00. The items must be delivered within 20 days FOB origin, with no tolerance for quantity variance, and are subject to inspection and acceptance at the manufacturer’s location. All components must comply with MIL-STD-130N for identification marking, and packaging must adhere strictly to ASTM D3951 and MIL-STD-129, while also meeting DLA’s packaging requirements, including palletization guidelines and unit pack specifications. The items are classified as a critical application item, and suppliers must be approved sources listed in the contract, including SPS Technologies, Huck International, Hi-Shear Corporation, and others, all using the same part number. The contract mandates zero non-conformances under sampling standards such as MIL-STD-1916 or ASQ H1331, with verification levels assigned per critical, major, and minor attributes. Technical compliance is governed by the DLA Master List of Technical and Quality Requirements, which supersedes all other standards. Suppliers requiring casting or forging capabilities must submit a Casting and Forging Assistance Request due to the likelihood of specialized tooling needs. Shipping must occur via traceable means, excluding parcel post, to the designated Fort Bragg, North Carolina delivery point. The contract includes a required delivery date of July 23, 2026, and is issued under solicitation SPE4A6-26-T-10HJ with a response deadline of August 6, 2026.
ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

in 8 days
View Details
NAICS: 488190
New
DIBBS
International Freight and FOB Destination LogisticsThe contract requires the management of both international and domestic logistics under FOB Destination terms, placing full responsibility for all transportation costs and risks on the contractor until goods are delivered to designated military bases, specifically including Joint Base Charleston. This includes end-to-end coordination of freight movements with strict compliance to delivery conditions where title and risk transfer only upon arrival at the destination. All operations must align with DOD requirements, ensuring secure, timely, and accurate fulfillment to sensitive military locations. The contracting activity falls under the Department of Defense’s Medical Supply Chain MD Surg FSF, with a NAICS code of 488190 indicating specialized freight forwarding and related logistics services. The contract is structured as a subcontract with a response deadline of August 3, 2026, and will be managed through the DIBBS platform. While no set-aside status is specified, performance is strictly tied to the specified military installation, and the contractor must be prepared to handle complex logistical challenges associated with defense supply chain operations, including compliance with military protocols, security requirements, and potential international shipping constraints.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 488190
New
DIBBS
Domestic and International Logistics & Delivery to Yokosuka, JapanThe contract requires the transportation of finished medical kits from an assembly point to a designated Defense Logistics Agency destination in Yokosuka, Japan, encompassing full logistical execution including customs clearance and export documentation to ensure compliance with international shipping regulations. All deliveries must adhere to WAWF-compliant procedures for receipt and acceptance, ensuring accurate and timely tracking of goods through the military supply chain. The scope demands expertise in end-to-end international logistics with specific attention to the handling of medical supplies under strict regulatory oversight. The solicitation is issued as a subcontract under NAICS code 488190, which pertains to other support activities for air transportation, indicating the need for specialized freight forwarding and logistics services. The posting date is July 28, 2026, with responses due by August 3, 2026, and is managed by the Medical Supply Chain MD Surg FSF under the Department of Defense. The place of performance is Yokosuka, Japan, and bidders must demonstrate capability to navigate international regulatory frameworks while maintaining the integrity and security of medical inventory throughout transit. All work must be performed in alignment with U.S. government procurement standards and defense logistics protocols.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 488190
New
DIBBS
Defense Transportation & Sea Shipment DocumentationThe contract requires the preparation and management of comprehensive documentation for the sea transportation of medical supplies to APO destinations, ensuring full compliance with foreign-flag vessel reporting and reflagging regulations. This involves meticulous coordination to meet federal requirements for international maritime logistics, particularly when using non-U.S. flagged vessels, and maintaining accurate records to satisfy regulatory and operational standards for Defense Department shipments. The work is critical to sustaining the supply chain for military medical operations in overseas locations served by APO 09227. The task is structured as a subcontract under the Department of Defense, specifically managed by the Medical Supply Chain MD Surg FSF, with a NAICS code of 488190 for other support activities for water transportation. The solicitation opened on July 28, 2026, with a submission deadline of August 3, 2026, and performance is exclusively focused on the APO zip code 09227-0000. All documentation must align with stringent federal maritime laws and support the seamless movement of life-saving medical materials, requiring expertise in international shipping compliance, documentation accuracy, and defense logistics protocols.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 488190
New
DIBBS
CUSHIONING MATERIAL
Solicitation # SPE8ED-26-T-1191
The contract specifies the procurement of cushioning material with part number 30458 and NSN 8135016126027, supplied by Knight's Armament Company, with a total quantity of 36 units delivered in single ea units at a unit price of $36.00, resulting in a total price of $1,296. Delivery is required FOB origin within 160 days from the contract award, with no variance allowed in quantity, and inspection and acceptance both occurring at the destination point. The material must be packaged in accordance with ASTM D3951, but all technical and quality requirements from the DLA Master List of Technical and Quality Requirements supersede this standard. Packaging must be marked and labeled as per MIL-STD-129, and palletization must comply with DLA Packaging Requirements for Procurement RP001. The delivered goods must be shipped to the DLA Distribution facility at New Cumberland, Pennsylvania, with the required ship date set for January 18, 2027, and the original delivery deadline at March 5, 2027. Transportation logistics are governed by DLAD Proc Notes C19 and C20. The contract is issued under solicitation SPE8ED-26-T-1191 with a response deadline of August 10, 2026, and is subject to Covered Defense Information protocols. The unit of issue aligns with DoD standards and is confirmed via the official DLA Unit of Issue spreadsheet.
CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 488190
New
DIBBS
INDICATOR, LIGHT
Solicitation # SPE4A6-26-T-09ZS
The contract is for the procurement of three indicator, light units with NSN 6210-01-623-5179 and part number 1852-1-10-20320 from Sorensen Lighted Controls Inc, under solicitation SPE4A6-26-T-09ZS. The total quantity ordered is three units, each priced at $3.00, with delivery required within 20 days of contract award, FOB origin, and inspection and acceptance occurring at the destination. Packaging must comply with ASTM D3951, but all technical and quality requirements from the DLA Master List of Technical and Quality Requirements take precedence, and all packaging and labeling must follow MIL-STD-129. Palletization is required per DLA’s RP001 packaging standards, and the Unit of Issue and Quantity per Unit Pack must strictly adhere to contract specifications. Shipment must be made via vessel using the fastest traceable means, prohibiting parcel post, and must use the designated freight shipping address in Norfolk, Virginia. The RDD code is 777, the tracking number is V466076196GF45, and the project identifier is 478 TP 2. The origin address for delivery is also in Norfolk, referenced as V46607. The original required delivery date is July 22, 2026, and the solicitation was posted on July 28, 2026, with responses due by August 5, 2026. The contract falls under NAICS code 488190 and is managed by the Department of Defense’s ASC Commodities Division, with Lakisha Atkinson as the primary point of contact. The item is subject to Covered Defense Information protocols and requires removal of government identification from non-accepted supplies. Government-use-only fields contain classification codes for inventory, distribution, and freight control.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 488190
New
DIBBS
SKIN
Solicitation # SPEFA5-26-T-0960
The contract issued by the Defense Logistics Agency Fleet Readiness Center for the item identified as SKIN with NSN 1560-LN-002-9428 and part number 65213-13011-142 specifies the procurement of two units at a total contract value of $2.00, with delivery required 53 days after award to Cherry Point, North Carolina under FOB Destination terms. All items must comply with the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951, and must be packaged and labeled per MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization conforming strictly to those guidelines. Item identification must follow MIL-STD-130N(1), and quality assurance sampling methods are governed by MIL-STD-1916 or a comparable zero-based plan, requiring zero non-conformances unless otherwise specified. Inspection and acceptance occur at the delivery point, with the government retaining responsibility for both functions. The material has no shelf life, and preservation methods are not further defined. The contract is solicited under SPEFA5-26-T-0960 with a response deadline of August 5, 2026, and requires electronic submission through DIBBS. The contract incorporates a comprehensive set of regulatory and compliance clauses, including mandatory cybersecurity protections under 52.240-93 and 252.204-7012, requirements for safeguarding covered defense information and reporting cyber incidents, and compliance with hazardous materials labeling standards under 252.223-7001 and 52.223-3, necessitating submission of Safety Data Sheets and hazard labels unless exempted. Offerors must certify their entity status via UEI and CAGE code, comply with employment eligibility verification through E-Verify, and affirm adherence to anti-human trafficking provisions. Ocean transport, if applicable, must use U.S.-flag vessels unless waived. Contractual changes are permitted under fixed-price terms, and subcontractors providing commercial products must flow down applicable clauses. Payments are to be processed exclusively through WAWF using approved document types. The solicitation does not specify a contract type or evaluation factors beyond implied price-driven, lowest price technically acceptable award criteria. Failure to meet any referenced technical, quality, packaging, or regulatory requirement constitutes grounds for rejection
DLA FLEET READINESS CENTER DLA PSC

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 488190
New
DIBBS
HOSE ASSEMBLY
Solicitation # SPEFA5-26-T-0958
This contract is for the procurement of a hose assembly with part number 70-061L180F273 and NSN 4720-LL-NCB-5971, in a quantity of three units, under solicitation SPEFA5-26-T-0958. The item is designated as a critical application item with no shelf life requirement and must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which take precedence over any other standard. Identification of the item and its packaging must follow MIL-STD-130N for military property marking and MIL-STD-129 for packaging and labeling. Packaging must conform to ASTM D3951 while adhering to DLA’s packaging requirements, including palletization per RP001, with unit of issue defined by the contract and quantity per unit pack set at 1. Sampling for quality verification must use MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances allowed unless otherwise specified, and critical, major, and minor attributes must be verified at levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Delivery is required within 11 days of contract award, with FOB destination delivery and inspection and acceptance occurring at the delivery point. The item must be shipped to the specified freight address at Cherry Point, North Carolina, with a parcel post address also provided for related correspondence. The original required delivery date is July 28, 2026, and the contract permits no variance in quantity—exactly three units must be delivered. The purchase request number is 7017659838, and the unit price is $3.00 per item, totaling $9.00. The contract references the DoD unit of issue system and provides the point of contact for inquiries, Larry Kemp, with associated phone and email details. All documents and requirements supersede any conflicting industry standards unless explicitly amended in the solicitation.
DLA FLEET READINESS CENTER DLA PSC

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 488190
New
DIBBS
WASHER, AIRCRAFT, MAT
Solicitation # SPE4A6-26-T-09ZZ
The contract is for the procurement of 84 aircraft washer mats identified by NSN 5310-01-562-2686, with a unit of issue in each and a total value based on a unit price for the full quantity. Delivery is required within 98 days under FOB origin terms, with inspection and acceptance occurring at the destination. The item must comply with MIL-STD-2073-1E packaging standards, including specific preservation methods, and be marked according to MIL-STD-129 with no special marking codes. Palletization must adhere to DLA packaging requirements, and mercury or mercury-containing compounds are strictly prohibited in preservation, packaging, packing, and marking unless explicitly exempted for functional components like batteries or instruments per NAVSEA guidelines, which also require secondary containment for portable mercury devices. Sampling inspection follows MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels or AQLs based on criticality. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with applicable revisions tied to solicitation or award dates depending on acquisition size. Delivery is destined to the DLA Distribution New Cumberland facility in Pennsylvania, with the need ship date set for November 4, 2025, and the original required delivery date at December 6, 2026. The solicitation number is SPE4A6-26-T-09ZZ, issued under the Department of Defense’s ASC Commodities Division, with a response deadline of August 5, 2026.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 488190
New
DIBBS
RIB
Solicitation # SPEFA5-26-T-0961
This contract issued by the DLA Fleet Readiness Center pertains to the procurement of two units of part number 449-034-219-151 with NSN 1560-LN-001-5270 under solicitation SPEFA5-26-T-0961, with a required delivery date of May 31, 2020, and a delivery lead time of 84 days FOB destination. The materials are subject to all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, identified by R or I numbers, which override any conflicting standards. Packaging must comply with MIL-STD-129 for marking and labeling and ASTM D3951 for general packaging, with palletization governed by DLA’s specific packaging directives. Sampling and inspection follow zero-defect acceptance criteria under MIL-STD-1916 or ASQ H1331 unless otherwise stated, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. No shelf life restriction applies to this item. The contract specifies a fixed quantity of two units with no tolerance for variance, and inspection and acceptance occur at the destination point. The item is to be delivered to the designated FLEET READINESS CENTER DLA addresses in Cherry Point, North Carolina, with parcel post and freight shipping details provided. The unit of issue is each (EA), and pricing is listed at $2.00 each, totaling $4.00. Documentation and compliance with DLA’s unit of issue and purchase unit standards are required, and all labeling and packaging must reflect the contract’s specified quantity per unit pack. The point of contact for inquiries is Curtis Harper, with contract details accessible via the DIBBS system, and the solicitation was posted July 28, 2026, with a response deadline of August 5, 2026.
DLA FLEET READINESS CENTER DLA PSC

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 488190
New
DIBBS
SEAL, CARBON
Solicitation # SPEFA5-26-T-0959
The contract pertains to the procurement of a carbon seal item identified by NSN 5330-LN-003-3627 and part numbers 3017934 and 3059025-01, supplied by Pratt & Whitney Canada Corp, and classified as a critical application item with no shelf life requirement. A total quantity of 8 units is required, each to be delivered in individual units of issue, under solicitation SPEFA5-26-T-0959, with delivery due in 70 days FOB destination, and zero variance permitted in quantity. Inspection and acceptance are both to occur at the destination, with packaging strictly aligned to ASTM D3951, but superseded by applicable DLA Master List of Technical and Quality Requirements. All packaging and labeling must conform to MIL-STD-129, and palletization must adhere to DLA’s packaging requirements. Sampling for quality assurance follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels or AQLs based on criticality as defined in associated technical documentation. The item is subject to tailored higher-level quality requirements applicable to both manufacturers and non-manufacturers, and all technical specifications referenced by R or I numbers are controlled by the latest revision of the DLA Master List in effect at the time of solicitation or award, as applicable. The unit of issue is EA, with a total contract value based on a per-unit price reflecting the specified quantity. Delivery must be completed by the original required date of July 28, 2026, with shipments directed to either the parcel post or freight shipping address in Cherry Point, North Carolina, as designated. The contract is managed by the DLA Fleet Readiness Center, with Larry Kemp as the primary point of contact, and all compliance must align with DoD authorized unit of issue standards and procurement protocols as outlined in applicable federal and military standards.
DLA FLEET READINESS CENTER DLA PSC

POSTED

1 day ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → DLA FLEET READINESS CENTER DLA PSC

Same awarding agency

NAICS: 483111
New
DIBBS
Ocean Transportation Compliance (If Shipped by Sea)The contract requires strict compliance with U.S. maritime regulations by mandating that all ocean shipments be routed through U.S.-flag vessels unless a formal waiver is obtained and approved. Failure to adhere to this requirement without proper authorization could result in noncompliance. Within 30 days of shipment, the contractor must deliver the Ocean Bill of Lading directly to the Contracting Officer and the Maritime Administration, ensuring full transparency and documentation of the transportation method used. This condition applies regardless of shipment volume or destination, and the obligation is binding under the terms of the subcontract. The contract is issued under the NAICS code 483111 for ocean transport services and is tied to the Department of Defense through the DLA Fleet Readiness Center. Performance is centered at Cherry Point, North Carolina, with a specific deadline for response set for August 5, 2026, and the solicitation was posted on July 28, 2026. While no set-aside designation is specified, the requirement is enforceable as part of the subcontract terms, and the contractor must ensure all documentation and logistics align with federal maritime compliance standards. Any deviation from the U.S.-flag vessel requirement must be preceded by a successfully processed waiver.
Deep Sea Freight Transportation

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 488310
New
DIBBS
Military Packaging, Palletization, and MarkingThis contract requires comprehensive packaging, palletization, and labeling services strictly aligned with ASTM D3951, RP001, MIL-STD-129, and MIL-STD-130N standards, including full implementation of Unique Identification (UID) and barcoding for all items. The work must ensure complete compliance with Department of Defense specifications for traceability, durability, and uniformity in military supply chain logistics. All activities are to be performed at the designated place of performance in Cherry Point, North Carolina, with a response deadline of August 5, 2026, and the solicitation was posted on July 28, 2026. The contract is classified as a subcontract under NAICS code 488310, indicating it falls within the supporting activities for transportation sector, and is managed by the DLA Fleet Readiness Center under the Department of Defense. Compliance with all referenced military standards and accurate UID/barcode application are critical to meeting contractual obligations.
Port and Harbor Operations

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 541380
New
DIBBS
Radioactive Materials Notification & Labeling (If Applicable)The contract requires the detection and reporting of radioactive materials that exceed established regulatory thresholds, ensuring compliance with federal safety and handling standards. All identified materials must be properly labeled according to MIL-STD-129 specifications, which dictate uniform marking and identification protocols for military shipments and inventory. This subcontract is issued by the Department of Defense through the DLA Fleet Readiness Center DLA PSC, with performance obligated at Cherry Point, North Carolina, under the NAICS code 541380, indicating it pertains to other scientific and technical consulting services. The solicitation was posted on July 28, 2026, and responses are due by August 5, 2026, with no set-aside provisions specified, meaning it is open to all eligible contractors regardless of business size or status.
Testing Laboratories and Services

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance & Safety Data Sheet (SDS) ManagementThe contract requires the identification and submission of a complete hazardous materials list along with corresponding Safety Data Sheets (SDS) in full compliance with Federal Standard No. 313 and OSHA’s 29 CFR 1910.1200(g) regulations. All submitted documentation must accurately reflect the hazardous substances present at the place of performance in Cherry Point, North Carolina, with an emphasis on proper classification, labeling, and emergency response information as mandated by federal safety standards. Contractors must ensure that SDS documents are current, accessible, and aligned with the Globally Harmonized System of Classification and Labeling of Chemicals. This is a subcontract under NAICS code 541690, issued by the Department of Defense through the DLA Fleet Readiness Center DLA PSC, with a response deadline of August 5, 2026. The requirement is focused on achieving regulatory compliance for hazardous material handling and documentation, critical for operational safety and environmental protection within defense facilities. Failure to provide complete and accurate materials data may result in non-compliance penalties or contract termination. All submissions must be made through the designated DIBBS portal by the specified deadline to be considered valid.
Other Scientific and Technical Consulting Services

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 336412
New
DIBBS
Military-Grade Component Supply (RIB Unit)The contract requires the supply of two military-grade components identified by NSN 1560-LN-001-5270 and Part Number 449-034-219-151, with strict adherence to technical, quality, and packaging standards applicable to defense equipment. This subcontract is issued under the Department of Defense through the DLA Fleet Readiness Center DLA PSC and is intended for performance at Cherry Point, North Carolina, with a ZIP code of 28533-0021. The solicitation was posted on July 28, 2026, with responses due by August 5, 2026, and is classified under NAICS code 336412, indicating it relates to aerospace product and parts manufacturing. No set-aside provisions or specific point of contact details are provided in the documentation, and the official solicitation can be accessed through the DIBBS portal at the provided online link.
Aircraft Engine and Engine Parts Manufacturing

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 336411
New
DIBBS
Aerospace Skin Panel SupplyThe contract calls for the supply of two aerospace SKIN components, likely fuselage or wing panels, to meet stringent Department of Defense standards set by DLA Fleet Readiness Center DLA PSC. These components must comply with technical specifications, quality requirements, and specialized packaging and labeling protocols defined by DLA for defense applications. The effort is classified as a subcontract under NAICS code 336411, indicating it falls within the aircraft manufacturing sector. The place of performance is firmly designated as Cherry Point, North Carolina, with a zip code of 28533-0021, suggesting final integration or inspection will occur at a military aviation facility there. All proposals must be submitted by August 5, 2026, following a posting date of July 28, 2026, leaving a seven-day window for potential vendors to respond. The solicitation is accessible through the DIBBS platform, and while no point of contact is listed, compliance with DLA’s operational and logistical standards is mandatory for award consideration.
Aircraft Manufacturing

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 541620
New
DIBBS
Hazardous Materials Compliance and SDS ManagementThe contract requires strict compliance with OSHA and DFARS regulations regarding the labeling of hazardous materials and the accurate submission of Safety Data Sheets, specifically governed by clause 252.223-7001. All hazardous substances handled under this agreement must be properly identified, marked, and documented to meet federal safety and reporting standards, ensuring personnel protection and regulatory alignment. The subcontractor is responsible for maintaining up-to-date SDS documentation and verifying that all labeling conforms to current OSHA HazCom guidelines while adhering to Department of Defense procurement requirements. This agreement is classified as a subcontract under NAICS code 541620 and is managed by the Department of Defense through the DLA Fleet Readiness Center DLA PSC, with performance centered at Cherry Point, North Carolina, zip code 28533-0021. The solicitation was posted on July 28, 2026, with a firm response deadline of August 5, 2026, indicating a tight window for qualification and proposal submission. The contract emphasizes rigorous adherence to safety protocols and documentation accuracy, making compliance non-negotiable for any entity seeking to fulfill the terms.
Environmental Consulting Services

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 541380
New
DIBBS
Quality Inspection and Conformance TestingThe contract requires comprehensive in-process and final inspection of hose assemblies to ensure zero non-conformances on critical attributes, with inspection procedures governed by MIL-STD-1916 or ASQ Z1.4 sampling standards. The work is focused on maintaining the highest levels of quality control throughout manufacturing to prevent defects that could compromise safety or performance, particularly in mission-critical applications. The inspection process must be meticulous and fully compliant with military and industry standards to guarantee conformance at every stage of production. The contract is a subcontract under the Department of Defense, issued by the DLA Fleet Readiness Center DLA PSC, with performance required at Cherry Point, North Carolina, 28533-0021. It was posted on July 28, 2026, and responses are due by August 5, 2026, under NAICS code 541380, which pertains to other scientific and technical consulting services. The emphasis is on delivering inspection services that meet exacting defense standards, with no tolerance for non-conformances on critical characteristics, ensuring readiness and reliability for military use.
Testing Laboratories and Services

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 561990
New
DIBBS
Military Packaging and Labeling ServicesThe contract requires comprehensive packaging, hazard labeling, and military marking services for delivered hose assemblies in strict adherence to federal and defense standards, notably MIL-STD-129 for military marking and OSHA HAZCOM for hazard communication. All work must ensure compliance with operational and safety requirements for secure transportation, handling, and storage within military supply chains, with a focus on accuracy, durability, and regulatory alignment. The services are subcontracted under the Department of Defense’s DLA Fleet Readiness Center DLA PSC and are performance-based, with the place of performance specified as Cherry Point, North Carolina, zip code 28533-0021. The solicitation is open for responses until August 5, 2026, and falls under NAICS code 561990 for other support activities. Participation is limited to qualified subcontractors capable of meeting the rigorous documentation, labeling, and packaging protocols mandated for defense logistics.
All Other Support Services

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 332994
New
DIBBS
Hose Assembly Manufacturing and SupplyThe contract calls for the manufacture and supply of three critical-application hose assemblies with part number 70-061L180F273 and NSN 4720-LL-NCB-5971, all of which must meet exacting military specifications to ensure operational reliability in demanding environments. These assemblies are essential components for defense systems, and the supplier must adhere to stringent quality and performance standards without modification or deviation. The work is to be performed at Cherry Point, North Carolina, with the delivery scheduled to support readiness requirements tied to Department of Defense operations. This subcontract was posted on July 28, 2026, with a response deadline of August 5, 2026, indicating a tight turnaround for proposals. The North American Industry Classification System code 332994 categorizes the work under other fabricated metal product manufacturing, aligning with specialized industrial production of mission-critical components. The contract is managed by the DLA Fleet Readiness Center under the Department of Defense, underscoring its importance to military logistics and equipment sustainment. All submissions must be made via the DIBBS platform, and compliance with technical, contractual, and delivery requirements will be rigorously evaluated before award.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 336411
New
DIBBS
Carbon Seal Supply and DeliveryThe contract calls for the supply and delivery of eight units of carbon seals with NSN 5330-LN-003-3627, intended for use in critical aerospace systems where zero-defect quality standards are mandatory. Each unit must meet stringent military compliance requirements, including packaging specifications designed to ensure integrity during transport and storage under demanding operational conditions. The item is classified under NAICS code 336411, indicating its alignment with aerospace component manufacturing, and is being procured as a subcontract under the Department of Defense. Performance of the contract is designated to occur at Cherry Point, North Carolina, with delivery expected to support immediate operational readiness at this military installation. The solicitation was posted on July 28, 2026, and responses must be submitted by August 5, 2026, with no set-aside provisions applied. All submissions must adhere to the DLA Fleet Readiness Center’s technical and compliance protocols to be considered.
Aircraft Manufacturing

POSTED

1 day ago

DEADLINE

in 7 days
View Details