Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

This Sources Sought opportunity from Department Of Defense was posted on June 4, 2024. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Automated License Plate Recognition Camera System

Closed
FA860124Q0122SSFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 334310
New
DIBBS
AMPLIFIER, AUDIO FREQUE
Solicitation # SPE7M5-27-T-0257
Solicitation SPE7M5-27-T-0257 is a total small business set-aside issued by the Defense Logistics Agency Weapons Support, Active Devices Division, for the procurement of five audio frequency amplifiers. The required items are identified by NSN 5996-01-498-3946 and correspond to Hose-McCann Telephone Co, Inc part numbers HM3XR300 and HMUM-M3X300. All quotes must be submitted electronically via the DLA Internet Bid Board System (DIBBS). The procurement may be eligible for automated award, and a price evaluation preference is available for HUBZone concerns. The contract specifies a delivery period of 137 days, with a need ship date of March 6, 2027, and an original required delivery date of October 31, 2027. Shipping is designated as FOB Origin, with the final destination for inspection and acceptance being DLA Distribution San Joaquin in Tracy, California. Packaging must adhere to ASTM D3951 and RP001 standards, while marking and labeling must comply with MIL-STD-129. Hazardous materials must be labeled according to the Hazard Communication Standard. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for electronic invoicing and receiving reports. Offerors must comply with the Buy American Act and the Berry Amendment, providing disclosure for any non-domestic materials used. Additionally, the contract incorporates DFARS 252.204-7012 for the safeguarding of covered defense information and cyber incident reporting. The primary point of contact for this procurement is Buyer Jeanette Heisey.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 2 days
NAICS: 334310
New
Federal
Conference Room Remodel
Solicitation # FA2823-26-Q-A113
Solicitation FA2823-26-Q-A113 is a total small business set-aside for a firm-fixed-price purchase order to modernize the audiovisual system in Building 104, Room 101 at Eglin Air Force Base, Florida. The project scope includes decommissioning legacy infrastructure and installing a Trade Agreements Act compliant system featuring a 20x5 foot Direct-view LED wall display, a 4K AV-over-IP distribution system, digital audio processing, and PTZ cameras to support unclassified hybrid collaboration and high-definition presentations. The contractor is responsible for all labor, materials, programming, and the delivery of an integrated conference table, with a required delivery schedule of no later than 120 days after receipt of order. A mandatory baseline service and maintenance agreement of at least four years must be included in the base price for CLIN 0001. Award will be determined using a Best Value Tradeoff process, evaluating technical capability, past performance, price, and SPRS data. Quotes must be submitted in three separate volumes covering technical capability, past performance, and price by October 26, 2026. All proposed equipment must be TAA compliant, and the AV LAN must remain fully isolated from the government network. Additionally, the contractor must provide an on-site commercial dumpster for waste disposal and adhere to MIL-STD-130 and MIL-STD-129 for the marking and labeling of high-value items costing $5,000 or more. Offerors must be registered in the System for Award Management and Wide Area WorkFlow to be eligible for award and payment.
FA2823 Aftc Pzio

POSTED

1 day ago

DEADLINE

in 6 days

General Info

NAICS

334310 - Audio and Video Equipment Manufacturing

Place of Performance

Wright Patterson AFB, OH, 45433, USA

Set-Aside

NONE

Documents

2

Automated License Plate Recognition (ALPR) Camera System Statement of Work

PDF, High priority: read this firstsow
High

Camera Placement - Probable Prairies and Woods at Wright Field

PDF, High priority: read this firstspecifications
High

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed
Posted

Sources Sought

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FA8601 Aflcmc Pzio
Contacts2 people available
OfficeWRIGHT PATTERSON AFB, OH, 45433-5344, USA
Office AddressWRIGHT PATTERSON AFB, OH, 45433-5344, USA
Contacts
Bryce Garrett
Jennifer Jensen

Full Description

Show more
The AFLCMC Operational Contracting Branch, Wright-Patterson AFB, Ohio, is seeking capabilities packages of potential sources. This sources sought is published for market research purposes only, to identify potential sources capable of delivering an Automatic License Plate Recognition (ALPR) camera system to Wright Patterson AFB Ohio. The Government is seeking capabilities packages from all potential sources. Firms that respond shall review the attached instructions and technical requirements and submit responses that: Specify that offered products meet the specifications provided below; and Provide detailed information to show clear technical compliance. THIS SOURCES SOUGHT IS FOR MARKET RESEARCH PURPOSES ONLY. THIS IS NOT A REQUEST FOR PROPOSALS/QUOTES. The 88th Security Forces squadron has a requirement for an Automatic License Plate Recognition (ALPR) Camera system. This is a requirement to support the 88 SFS ongoing mission to provide security to Wright-Patterson Air Force Base. The requirement consists of 7 camera locations of law enforcment grade powered by solar power and having LTE connectivity. After award Contractor will coordinate with the SFS Point of Contact to conduct and complete a development plan (site survey). Contractor will coordinate with the SFS Point of Contact to complete inspection of installation area prior to service (operating system/platform connectivity) starting. On-site training is required. The contractor shall deliver and install ALPR cameras, hardware, software, and associated equipment within 90 days of contract award. See attached Statement of Work (SOW) for futher requirements. Please respond to this RFQ by emailing response to: Bryce Garrett, Contract Specialist at the e-mail: bryce.garrett@us.af.mil and SSgt Jennifer Jensen, Contracting Officer at the e-mail jennifer.jensen.10@us.af.mil no later than 12:00 pm EST, 10 June 2024 - Monday (or sooner if possible) in order to be considered timely. Please contact the POC's with additional questions at the above listed email addresses. Questions will be considered in market research, but may not be responded to due to time constraints. Clarifications needed by contractor: Will the proposed system have the ability to integrate with other brands of surveillance equipment and other license plate readers, or will the system only be able to integrate with other equipment of the same brand?

More opportunities from Department Of Defense → FA8601 Aflcmc Pzio

Same awarding agency

NAICS: 334516
New
Federal
Off-Axis Parabolic Mirrors
Solicitation # FA860127Q0003
The Air Force Life Cycle Management Center, on behalf of the Air Force Institute of Technology, is conducting market research via a Sources Sought notice to identify qualified sources for the manufacture and delivery of 66 customized off-axis parabolic mirrors and associated protected-gold coating services. These precision optical components are intended for use in the Extreme Light Laboratory to support ultra-intense laser experiments. The mirrors must feature a 30mm diameter fused-silica substrate with a parabolic focus at 45 degrees, a surface roughness of less than 1nm RMS, and a scratch/dig specification of 20-10. The required protected-gold coating must provide an average reflectivity of at least 97 percent at a wavelength of 780 plus or minus 40nm with a 45-degree angle of incidence. The selected contractor will be responsible for all labor, materials, quality assurance, and transportation to Wright-Patterson Air Force Base, Ohio. Key deliverables include the mirrors and comprehensive test data, including certificates of conformance and surface-measurement data. Delivery is required within 98 calendar days after receipt of order, and the equipment must be warranted against defects for two years following receipt. Payment terms are set at 100 percent after delivery, net 30 days from the invoice date. Interested parties under NAICS code 334516 must submit a capability package by October 23, 2026.
Analytical Laboratory Instrument Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 3 days
View Details
NAICS: 334516
New
Federal
Sources Sought_Midwave Camera
Solicitation # FA860127Q0011
The Air Force Life Cycle Management Center, Installation Contracting Division, is conducting market research to identify potential sources capable of providing a 1.5-5 micron midwave camera and associated accessories for the Air Force Institute of Technology at Wright-Patterson Air Force Base, Ohio. This sources sought notice is for market research purposes only and is not a request for proposals. The government is seeking capabilities packages from all interested sources, including various small business categories, under NAICS code 334516. Interested firms must submit a concise capabilities package of no more than five pages by October 29, 2026, at 3:00 PM Eastern Time to the designated points of contact. The scope of work includes the delivery of the camera system, calibration of the instrument and lens, and the provision of a protective case. The contractor will be responsible for all transportation, loading, and onsite setup, with a required delivery timeline of no more than 90 days after contract award. Technical specifications include an operating temperature range of -10 C to 45 C and a two-year warranty against defects in material and workmanship. Payment is structured as 100% upon completion of all requirements on a net 30 basis, with invoicing processed through Wide Area Work Flow. The government is evaluating the potential for a small business set-aside and requires respondents to provide detailed information regarding their socio-economic status, ownership, and compliance with FAR clause 52.219-14 regarding limitations on subcontracting.
Analytical Laboratory Instrument Manufacturing

POSTED

6 days ago

DEADLINE

in 9 days
View Details
NAICS: 236220
New
Federal
SABER FY 27-32
Solicitation # FA860126R0019
The United States Air Force is soliciting proposals for the Simplified Acquisition of Base Engineering Requirements (SABER) FY27-32, a 100% 8(a) small business set-aside IDIQ contract. The selected contractor will provide all management, labor, materials, equipment, and design capabilities to execute over 100 simultaneous projects involving maintenance, repair, and minor construction of real property at Wright-Patterson Air Force Base, Ohio. The scope includes work on buildings, roads, roofs, and utilities, as well as hazardous waste remediation and design-build services from concept to 100 percent design. The contract has a maximum ceiling of 160 million dollars, which increases to 175 million dollars if the option for extended services is exercised. Performance is expected to begin within 10 days of award and spans a total period of 1,825 calendar days. Award will be based on the Lowest Price Technically Acceptable (LPTA) process. Proposals must first pass compliance gates, including a requirement for the prime contractor to be a US-owned and operated company. Technical evaluations are conducted on a pass/fail basis, focusing on the management approach and project planning and execution. Pricing is structured using RS Means line items and coefficients. Proposals must be submitted electronically via the Procurement Integrated Enterprise Environment (PIEE) Solicitation Module. Key requirements include adherence to Davis-Bacon Act wage determinations for Montgomery and Greene Counties, compliance with NIST SP 800-171 cybersecurity standards, and the provision of a minimum one-year warranty on all construction work.
Commercial and Institutional Building Construction

POSTED

6 days ago

DEADLINE

in 3 days
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS