Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Automotive Gasoline (MRR) Supply and Delivery

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails the supply and delivery of Automotive Gasoline (MRR) to military installations within California, ensuring strict adherence to ASTM D4814 quality specifications. All deliveries are subject to government acceptance through rigorous quality testing protocols, with compliance being a mandatory condition for payment and performance. The fuel must meet the defined regulatory standards to guarantee operational readiness and safety across military vehicles and equipment. This agreement is structured as a subcontract under the authority of the Defense Logistics Agency, a component of the Department of Defense, and is classified under NAICS code 324110 for petroleum and coal products manufacturing. The contract was posted on August 7, 2026, and performance is focused exclusively on military bases located in California. While specific delivery locations and point of contact details are not provided, the contractual obligations center on consistent, high-quality fuel provisioning to support defense operations without interruption.

General Info

Supply of ASTM D4814-compliant automotive gasoline to California military bases under DLA subcontract.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

324110 - Petroleum RefineriesView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 7

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply and delivery of Automotive Gasoline (MRR) to military bases in California, meeting ASTM D4814 standards, with government acceptance based on quality testing.

Similar Contracts

Same NAICS industry code

Premium Unleaded Gasoline SupplyThe contract entails the supply of 3,000 liters of premium unleaded gasoline meeting either U.S. military or commercial standards, specifically designated for use at U.S. military installations located in Italy. The fuel must comply with stringent quality specifications to ensure operational reliability and safety across military vehicle and equipment fleets. This subcontract is issued under the NAICS code 324110, which classifies it within the petroleum and coal products manufacturing sector, reflecting its focus on refined fuel delivery. The award is administered by the Defense Logistics Agency under the Department of Defense, indicating centralized procurement oversight and adherence to federal supply protocols. Performance of this contract is required at U.S. military sites in Italy, with no specific city or state identified, implying flexibility in delivery location tied to operational needs. The contract was posted on August 7, 2026, and is accessible via the DIBBS system, suggesting it was competitively solicited and awarded through official defense procurement channels. While no set-aside status is indicated, the involvement of a federal agency ensures compliance with federal contracting regulations, including quality control, documentation, and timely delivery requirements essential for mission readiness. The volume and specification of the product reflect a standard but critical logistical need for high-grade fuel in overseas military operations.

Defense Logistics Agency

POSTED

DEADLINE

Bulk Diesel Fuel Supply (SFD Diesel)The contract entails the supply of 3,102,538 liters of military-grade Special Field Diesel (SFD) meeting exact technical specifications set by the Defense Logistics Agency for use at U.S. military installations in Italy. The fuel must comply with stringent DLA standards to ensure operational reliability and compatibility with military equipment deployed in the region. This is a subcontract under the broader procurement framework managed by the Department of Defense, classified under NAICS code 324110 for petroleum refineries and fuel blending operations. The contract was posted on August 7, 2026, with performance location centered on U.S. military facilities in Italy, though specific city or state details are not provided. The transaction is tracked through the DIBBS system under contract SPE60526D9401 with delivery identifier SPE60526FHXD4, indicating it is part of a larger logistics chain managed by the Defense Logistics Agency to sustain military readiness through secure and standardized fuel procurement.

Defense Logistics Agency

POSTED

DEADLINE

Diesel Fuel (DS1) Supply and DeliveryThe contract obligates the supplier to provide and deliver 37,000 US gallons of Diesel Fuel (DS1) to designated military locations under FOB Destination terms, meaning the supplier assumes all costs and risks until the fuel arrives at the specified destination. The transaction is categorized as a subcontract under NAICS code 324110, which corresponds to petroleum refinery operations, and is managed by the Defense Logistics Agency under the Department of Defense. Performance is tied to military sites without specific geographic details provided, and the contract was posted on August 7, 2026, indicating it is a future-oriented procurement likely in preparation for operational requirements. The supply chain responsibility rests entirely with the subcontractor until delivery is confirmed at the final military destinations.

Defense Logistics Agency

POSTED

DEADLINE

Diesel Fuel (DS2) Supply and DeliveryThe contract entails the supply and delivery of 105,000 US gallons of Diesel Fuel (DS2) to multiple Department of Defense sites under FOB Destination terms, meaning the seller bears all costs and risks until the fuel reaches the designated delivery locations. The procurement is classified under NAICS code 324110, indicating it falls within the petroleum refining industry, and is administered by the Defense Logistics Agency on behalf of the Department of Defense. The contract type is identified as a subcontract, suggesting it may be part of a larger procurement framework or issued under an existing master agreement. The posting date of August 7, 2026, indicates this is a future solicitation, and the UI link directs to the DIBBS system where detailed award records can be accessed. Delivery must comply with DOD specifications for DS2 diesel fuel, ensuring the product meets required military standards for performance and safety.

Defense Logistics Agency

POSTED

DEADLINE

Diesel Fuel (MMR) Supply and DeliveryThe contract obligates the supplier to deliver 75,000 US gallons of Diesel Fuel (MMR) to designated military installations under FOB Destination terms, meaning title and risk transfer to the government upon arrival at the specified destinations. The fuel must meet all applicable military specifications and be delivered in accordance with federal procurement standards, ensuring reliability and compatibility with defense equipment. Delivery timelines, quality assurance protocols, and compliance with environmental and safety regulations are implicitly required as part of the fulfillment obligation. Issued under the Defense Logistics Agency within the Department of Defense, this subcontract is classified under NAICS code 324110, indicating its alignment with petroleum and coal products manufacturing. The contract was posted on August 7, 2026, and is accessible via the DLA’s public portal, suggesting it is part of a broader effort to maintain fuel readiness across military operations. While specific delivery locations and timelines are not detailed in the provided data, full compliance with FOB Destination obligations requires the vendor to manage transportation logistics, documentation, and unloading coordination at the government’s designated sites.

Defense Logistics Agency

POSTED

DEADLINE

Burner Fuel Oil (FS2) Supply and DeliveryThe contract involves the supply and delivery of 16,783 US gallons of Fuel Oil, Burner FS2 to multiple Department of Defense facilities located in Rhode Island, Connecticut, and Massachusetts. Delivery is structured under FOB Destination terms, meaning the supplier is responsible for all costs and risks until the fuel reaches the specified delivery points. The procurement is classified under NAICS code 324110, indicating it pertains to petroleum refining activities, and is issued as a subcontract under the Defense Logistics Agency, which operates within the Department of Defense. The solicitation was posted on August 7, 2026, and while no solicitation number is provided, the contract is accessible via a DIBBS link for official recordkeeping and tracking purposes. The place of performance spans multiple states but no specific cities or zip codes are detailed in the contract data.

Defense Logistics Agency

POSTED

DEADLINE

Diesel Fuel DS2 SupplyThe contract entails the supply of 15,000 gallons of Ultra-Low Sulfur Diesel DS2 to multiple U.S. military installations, with a permissible quantity variation of plus or minus 10 percent to accommodate operational needs. This subcontract is issued under the Department of Defense through the Defense Logistics Agency and falls under NAICS code 324110, which categorizes petroleum refining activities. The fuel is designated as DS2, indicating compliance with specific military-grade specifications for diesel fuel purity and performance. The contract was posted on August 7, 2026, and is intended to support fueling operations across various defense facilities, ensuring consistent and reliable energy supply for military vehicles and equipment. Delivery and performance are expected at locations designated by the Defense Logistics Agency, though exact geographic details are not specified in the provided data.

Defense Logistics Agency

POSTED

DEADLINE

Diesel Fuel Supply and DeliveryThe contract involves the supply and delivery of Ultra-Low Sulfur Diesel (DS2) to multiple U.S. military installations across California, specifically Camp Pendleton, Miramar, NAS North Island, and MCLB Barstow. The fuel must meet the ASTM D975 standard, ensuring compliance with federal specifications for quality and environmental requirements. Delivery follows FOB Destination terms, meaning the supplier is responsible for all costs and risks until the fuel reaches the designated military locations. This is a subcontract under the Department of Defense, managed by the Defense Logistics Agency, and classified under NAICS code 324110 for petroleum and coal products manufacturing. The contract was posted on August 7, 2026, and is part of a broader effort to secure reliable fuel sources for operational readiness across key defense facilities in the region.

Defense Logistics Agency

POSTED

DEADLINE

Diesel Fuel SupplyThe contract entails the supply of 613,000 gallons of diesel fuel meeting the National Stock Number 9140-015240139, strictly compliant with Department of Defense standards for military operations. The fuel will be delivered FOB destination, meaning the vendor assumes all costs and risks until the product arrives at the designated military location. The contract is classified as a subcontract under NAICS code 324110, indicating it involves petroleum and coal products manufacturing. It is managed by the Defense Logistics Agency under the Department of Defense, with the posting date indicating the opportunity was made available on August 7, 2026. There is no specified set-aside type or place of performance details provided, and the point of contact is not listed, but the contractual action is traceable through the official DIBBS link for award verification.

Defense Logistics Agency

POSTED

DEADLINE

No-Ethanol Automotive Gasoline SupplyThe contract entails the supply of 2,800 gallons of no-ethanol automotive gasoline meeting Department of Defense fuel standards, identified by NSN 9130001487104, with delivery terms specified as FOB destination. This requirement is part of a subcontract under the NAICS code 324110, administered by the Defense Logistics Agency on behalf of the Department of Defense. The agreement is set to be awarded under a solicitation issued on August 7, 2026, and the fuel must comply strictly with all military specifications to ensure performance and compatibility in DoD vehicles and equipment. Delivery is to be made directly to the designated location, with responsibility for transportation and associated costs borne by the supplier until the point of receipt at the destination.

Defense Logistics Agency

POSTED

DEADLINE

Aviation Fuel Supply (JP8/JA1/JF5) with AdditivesThe contract entails the supply of aviation turbine fuel conforming to MIL-DTL-83133 specifications, including JP8, JA1, or JP5 variants, with mandatory injection of functional additives such as FSII, SDA, and CIX to ensure performance and safety under operational conditions. Each batch must be accompanied by traceable certification documentation to verify compliance with military standards and quality control protocols. The fuel is intended for defense logistics purposes and is being procured under a subcontract arrangement managed by the Defense Logistics Agency under the Department of Defense. The North American Industry Classification System code 324110 indicates the industry scope as petroleum and coal products manufacturing. The contract was posted on August 7, 2026, and is accessible via the DIBBS system with specific contract and delivery identifiers, though no specific place of performance or point of contact details are provided in the metadata.

Defense Logistics Agency

POSTED

DEADLINE

Asphalt Emulsion Supply

Texas Department of Transportation

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

DECK BOX OPERATOR, V

Solicitation # SPE7MC-26-T-186P

The contract is for the procurement of one unit of Deck Box Operator, V, identified by NSN 4820-01-521-1101, under solicitation SPE7MC-26-T-186P, issued by the Defense Logistics Agency. Delivery is required within 20 days to FPO AP 96632 aboard the USS THEODORE ROOSEVELT CVN 71, with terms FOB destination and zero variance allowed in quantity. The item must be packaged in strict accordance with MIL-STD-2073-1E and MIL-STD-129, using DLA-approved packaging procedures and codes, including unit container D3 and pack code U. The shipment must avoid parcel post and instead be dispatched by the fastest traceable means with DLA Vendor Shipment Method (VSM) and RDD 777 designation. Mercury or mercury-containing compounds are strictly prohibited unless explicitly exempted for functional uses such as specialized instruments or sensors as defined by NAVSEA, and any exempted fluorescent lamps or instruments must include a secondary containment and be shock-proof per NAVSEA 5100-003D. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled based on acquisition size and solicitation amendments. The item shall be inspected and accepted at the delivery point, and special marking is not required. The contract is classified under NAICS 332911 and was posted on August 9, 2026, with responses due by August 20, 2026.

Industrial Valve Manufacturing

POSTED

about 1 hour ago

DEADLINE

AIR CONDITIONER

Solicitation # SPE8E8-26-T-5113

The contract pertains to the procurement of six air conditioners, identified by NSN 4120016491002 and part number 38203-0666 from AIRXCEL, INC., under solicitation SPE8E8-26-T-5113. Delivery is required within 20 days of contract award, with shipment FOB destination, and inspection and acceptance occur at the delivery point. No variance in quantity is permitted, with zero percent plus or minus tolerance. Packaging must comply with ASTM D3951, but all applicable DLA Master List of Technical and Quality Requirements take precedence, including mandatory labeling per MIL-STD-129 and palletization as specified in RP001. The unit of issue is each, with a total price of $6.00 per unit, totaling $36.00 for the order. The destination for delivery is Fleet Activities Sasebo, PSC 476 Box 1, FPO AP 96322-0001, United States, with an alternate freight shipping address in Sasebo, Japan. Transportation instructions are governed by DLAD Proc Note C19 and C20. The original required delivery date is August 5, 2026, and the contract is administered by the Defense Logistics Agency under the NAICS code 333415, with primary point of contact Alexis Selby. All supplies are subject to the rules regarding covered defense information and the removal of government identification from non-accepted items.

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 1 hour ago

DEADLINE

Solicitation # SPE7MC-26-T-187Y

A single check valve with a steel body and stainless steel trim is required, designed for a maximum operating pressure of 150 psi and a maximum temperature of 180 degrees Fahrenheit, with flange-type end connections and an end-to-end length of 4.12 inches nominal. The valve body may be manufactured from bar stock ASTM A36 alloy AISI 1018 as an acceptable alternative to the original cast material. The contract specifies strict compliance with DLA packaging requirements and incorporates technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements. The use of Class I ozone depleting chemicals is prohibited, and mercury or mercury-containing compounds may not be intentionally added or come into direct contact with the hardware, except for specific functional uses such as in batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or chemical analysis reagents specified by NAVSEA; in those cases, portable devices must be shockproof and include a secondary containment boundary. This is classified as a critical application item with authorized part numbers from Admiral Valve LLC. Only one unit is required, to be delivered within 20 days FOB origin with zero variance in quantity, inspected and accepted at destination under MIL-STD-2073-1E packaging guidelines and MIL-STD-129 marking requirements. Palletization must align with DLA standards, and shipment must be sent by the fastest traceable means—parcel post is expressly prohibited. The delivery address is the Nuclear Power Training Unit in Goose Creek, South Carolina, and the contract was issued by the Defense Logistics Agency under solicitation SPE7MC-26-T-187Y with a required delivery date of August 3, 2026.

Industrial Valve Manufacturing

POSTED

about 1 hour ago

DEADLINE

Solicitation # SPE7MC-26-T-186G

The contract specifies the procurement of a single valve body with NSN 4820-01-337-4114 and part number 6839586 for Allison Transmission Inc or 2AX532 for Oshkosh Defense LLC under solicitation SPE7MC-26-T-186G. The item must be delivered in one unit within ten days of award, with delivery terms FOB origin and no tolerance for quantity variance. Inspection and acceptance occur at the destination location, Fort Bliss, Texas, where the shipment must be sent via the Redball Express system using the fastest traceable means, explicitly excluding parcel post. Packaging must comply with ASTM D3951 and MIL-STD-129, following DLA Packaging Requirements for Procurement, with unit packaging and palletization strictly adhering to specified standards. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute materials require prior approval unless explicitly authorized by the specification. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, which supersede all other standards. The contract includes detailed shipping and marking instructions, including the military freight address, project code, and government-only identifiers, and the required delivery date is August 5, 2026. The official point of contact is Paula McClary, reachable via email and phone, with additional compliance and ordering details accessible through the DLA eProcurement portal.

Industrial Valve Manufacturing

POSTED

about 1 hour ago

DEADLINE

Solicitation # SPE7MC-26-T-186N

The contract specifies the procurement of a single globe valve made of 316 stainless steel with a 1/4 inch female NPT connection, designated by NSN 4820-01-042-2921 and part numbers 3008143-1 and 4251F4Y, for use in high-pressure, high-temperature environments up to 2000 PSI and 600 degrees Fahrenheit, primarily for end item storage and recharging applications. It is classified as a critical application item with strict compliance requirements, including zero tolerance for intentional mercury or mercury-containing compounds in direct contact with the hardware, except for specific exceptions like batteries, fluorescent lamps, sensors, and weapon systems, which must meet additional containment standards per NAVSEA 5100-003D. The valve must adhere to all technical and quality requirements referenced from the DLA Master List, and packaging must conform to MIL-STD-2073-1E and MIL-V-3, with Level A preservation when ZZ is used as the preservation method. Marking and labeling must follow MIL-STD-129 without special codes, and palletization must meet DLA packaging guidelines. Delivery is required within 20 days FOB destination to the USS THEODORE ROOSEVELT CVN 71, FPO AP 96632, via the fastest traceable means—not parcel post—with a required delivery date of August 10, 2026, and shipment must be coordinated using RDD 777 and the DLA Vendor Shipment Module. The contract is issued under solicitation SPE7MC-26-T-186N with a fixed quantity of one unit, no allowable variance, and inspection and acceptance occurring at destination.

Industrial Valve Manufacturing

POSTED

about 1 hour ago

DEADLINE

VALVE, FLOW CONTROL

Solicitation # SPE7MC-26-T-187T

The contract is for the procurement of four flow control valves, identified by NSN 4820011979566 and part number 025-11046, supplied by JOHNSON CONTROLS NAVY SYSTEMS, LLC. Delivery is required within five days of contract award, with shipment originating from the supplier and delivered FOB origin to the General Depot of Naval Supplies in Kaohsiung City, Taiwan. The unit price is $4.00 per valve, totaling $16.00 for the full order, with no variance allowed in quantity. Packaging must comply with MIL-STD-2073-1E and MIL-V-3, including preservation methods specified as Level A when ZZ is used, and marking must adhere to MIL-STD-129. Palletization and packaging requirements follow DLA’s RP001 standards, with no special marking codes applied. Inspection and acceptance occur at origin, and the item is classified as a critical application component. The contract is issued under solicitation SPE7MC-26-T-187T, with a response deadline of August 20, 2026, and is managed by the Defense Logistics Agency under NAICS code 332911. Technical and quality requirements are incorporated by reference from the DLA Master List, and the latest revisions in effect on the solicitation issue date govern compliance. The point of contact for inquiries is Chad Zernis, with the delivery scheduled for January 14, 2026.

Industrial Valve Manufacturing

POSTED

about 1 hour ago

DEADLINE

PLATE, INSTRUCTION

Solicitation # SPE8E6-26-T-4163

This contract pertains to the procurement of a single unit of Plate, Instruction, identified by NSN 9905-01-090-7680 and part number 3561030, under solicitation SPE8E6-26-T-4163. The item is subject to specific DLA packaging requirements as outlined in the DLA Master List of Technical and Quality Requirements, with applicable technical standards referenced by R and I numbers. It is classified as a Type I (Code M) item with a non-extendable 24-month shelf life, requiring special marking code 32 to indicate this requirement. Packaging must comply with MIL-STD-2073-1E, including preservative methods, wrap materials, and unit container specifications, while marking must adhere to MIL-STD-129. The shipment must be transported via traceable means, excluding parcel post, to the designated delivery point at Rapid City, SD, with delivery due within 10 days of contract award and no tolerance for quantity variance. The contract specifies FOB origin delivery, with inspection and acceptance occurring at the destination. The Government retains control over the item’s handling and disposition, with specific instructions for removal of government identification from non-accepted supplies. The supply chain data includes the supplier address, shipment details through W8WP SD ARNG CSMS 2, and mandatory reporting identifiers such as RDD E, project TP 2, and supplier code W81LBJ. The contract is governed by DoD unit-of-issue standards, and Covered Defense Information provisions apply. The contract is issued by the Defense Logistics Agency under NAICS code 339950, with Brett Scull designated as the primary point of contact. The solicitation closed on August 20, 2026, with an original required delivery date of August 5, 2026, and all contractual obligations must be fulfilled within the prescribed parameters.

Sign Manufacturing

POSTED

about 1 hour ago

DEADLINE

COATING KIT, RAIN ER

Solicitation # SPE8ES-26-T-2548

The contract pertains to the procurement of a Coating Kit, Rain ER, identified by NSN 8010-01-580-5987 and part number FP-100CM, with a quantity of four kits, each unit of issue being a KT. Delivery is required within 20 days to Edwards Air Force Base, California, FOB destination, with no variance allowed in quantity and inspection and acceptance occurring at the delivery point. The item is classified as a TYPE 2, CODE 4 shelf-life item with a 12-month extendable shelf life, and all packaging must comply with MIL-STD-2073-1E and MIL-STD-129 marking standards. Packaging and shipping must adhere to DLA packaging requirements, including specific hazardous materials handling protocols under IP025, and traceable freight methods only are permitted—parcel post is prohibited. The supplier, CAAP CO., INC., must submit Safety Data Sheets and compliant Hazardous Communication Standard labels in accordance with 29 C.F.R. 1910.1200, effective June 1, 2015, and ensure employee training on these new requirements. Technical and quality specifications referenced by R or I numbers are governed by the DLA Master List, with the applicable revision determined by the acquisition type and solicitation timeline. The procurement is under solicitation SPE8ES-26-T-2548, with a response deadline of August 17, 2026, and the original required delivery date set for August 6, 2026.

Paint and Coating Manufacturing

POSTED

about 1 hour ago

DEADLINE

HARNESS ASSEMBLY, MASK,

Solicitation # SPE8E6-26-T-4162

The contract pertains to the procurement of a harness assembly for an oxygen mask, identified by part number 460-190-457 and NSN 4240-01-392-6079, with a quantity of ten units to be delivered FOB origin within twenty days. The supplier, Interspiro Inc., is required to comply with all technical and quality specifications outlined in the DLA Master List of Technical and Quality Requirements, which are incorporated by reference and governed by the revision in effect at the time of solicitation or award. Packaging must adhere to MIL-STD-2073-1E, with specific methods including preservation, labeling, and containment standards, and must follow MIL-STD-129 for marking, strictly prohibiting the use of plastics for wrapping or cushioning where feasible. Delivery is to be made to the Southwest Regional Maintenance Center in San Diego, with hazardous material shipping instructions directing delivery to Building 3322T, and parcel post is explicitly prohibited; shipping must occur via the fastest traceable method. Inspection and acceptance occur at the destination with no variance allowed in quantity. The contract, issued under solicitation SPE8E6-26-T-4162, carries a unit price of $10.00 for a total value of $100.00 and includes restrictions on the handling of covered defense information. The required delivery date is August 10, 2026, and the contract includes specific government use codes for tracking and logistics.

Surgical Appliance and Supplies Manufacturing

POSTED

about 1 hour ago

DEADLINE

VALVE, SAFETY RELIEF

Solicitation # SPE7MC-26-T-186H

A safety relief valve with NSN 4820-01-588-7177 and part number 517.00005.3 is being procured by the Defense Logistics Agency under contract SPE7MC-26-T-186H, with a single unit requirement to be delivered within ten days of contract award. Delivery is FOB origin and must comply with stringent packaging standards per ASTM D3951 and MIL-STD-129, while adhering to DLA’s Master List of Technical and Quality Requirements, which override any conflicting specifications. The item must be packaged and palletized according to RP001 DLA Packaging Requirements, with no quantity variance permitted. The destination for delivery is Fort Riley, Kansas, with shipment required via the fastest traceable means, excluding parcel post, and marked with the official military shipping identifier W55XGJ and RDD 555. The contract specifies that all labeling and documentation must reflect government standards, and the item must be inspected and accepted at the destination. The solicitation was issued on August 9, 2026, with responses due by August 20, 2026, and the original required delivery date is August 5, 2026. The point of contact for inquiries is Paula Mcclary, reachable via email and phone provided in the contract documentation.

Industrial Valve Manufacturing

POSTED

about 1 hour ago

DEADLINE

Solicitation # SPE7MC-26-T-186E

The contract pertains to the procurement of a single DISK, VALVE with NSN 4820012210266, supplied by HUNT VALVE COMPANY, INC. under solicitation SPE7MC-26-T-186E. The item is required in a quantity of one unit with a delivery deadline of 20 days from the award, delivered FOB destination, and subject to zero variance in quantity. Inspection and acceptance both occur at the destination. Packaging must comply with MIL-STD-2073-1E, including specific methods for preservation, wrapping, and containerization, and all markings must adhere to MIL-STD-129 without special codes. Palletization follows DLA packaging requirements, and the shipment is addressed to USS BOXER LHD 4 at FPO AP 96661. The item is to be shipped via vessel under DLAD PROC NOTE C19 and C20, with a required delivery date of August 5, 2026. The contract mandates strict adherence to DLA’s Master List of Technical and Quality Requirements, particularly excluding intentional use of mercury or mercury-containing compounds in or on the hardware, with limited exceptions for approved functional applications like certain batteries or instruments, which must include secondary containment as per NAVSEA 5100-003D. All supplies must be free of government identification if non-accepted, and the unit of issue is the individual piece (EA). The Defense Logistics Agency issues this solicitation under NAICS code 332911, with Paula Mcclary listed as the primary point of contact. The delivery is part of a larger logistical effort identified under project 9AL TP 2 and requires use of the VSM system for vendor shipment coordination.

Industrial Valve Manufacturing

POSTED

about 1 hour ago

DEADLINE

Solicitation # SPE8ES-26-T-2546

This contract pertains to the procurement of 100 ounces of adhesive with NSN 8040-01-420-0999 under solicitation SPE8ES-26-T-2546, issued by the Defense Logistics Agency. The adhesive must comply with multiple technical and quality standards including SAE AMS-S-8802F, MIL-STD-129R, MIL-STD-147F, and Federal Standard 313F, and is classified as a Type I (Code G) item with a non-extendable shelf life of nine months. All hazardous materials must be accompanied by Safety Data Sheets (SDS) formatted to 29 C.F.R. 1910.1200 standards and labeled in accordance with the Globally Harmonized System, with supplier training on these requirements mandatory prior to award. Packaging must follow MIL-STD-2073-1E and DLA packaging requirements, including specific marking per MIL-STD-129 and the special code 32 indicating Type I shelf life. Palletization and shipping must adhere to RP001 and IP025 for hazardous materials, with freight shipped via traceable means only and no parcel post permitted. Delivery is FOB destination within 20 days of award to Fort Benning, Georgia, with zero variance allowed in quantity and inspection and acceptance occurring at the delivery point. The contract calls for full compliance with DLA’s Master List of Technical and Quality Requirements, and the unit of issue is the ounce as defined by DoD standards.

Adhesive Manufacturing

POSTED

about 1 hour ago

DEADLINE