This Combined Synopsis/Solicitation opportunity from Department Of Veterans Affairs was posted on August 5, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

B533 Process Water Samples for Renal Dialysis, VA Puget Sound Health Care System

Closed

36C26026Q0793Federal

Submission Closed08/15/2026, 12:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541380

New

Joliet Job Corps-Request for Quote Asbestos Testing & Abatement

Solicitation # Joliet JCC Asbestos Testing & Abatement

Management & Training Corporation is seeking quotes for a fee-for-service subcontract to provide asbestos testing and abatement services at the Joliet Job Corps Center in Joliet, Illinois. The scope of work includes sampling and laboratory analysis of ceiling tiles in the Administration Academic Building and Welcome Center, as well as testing and potential removal of asbestos-containing material floor tiles in the Gymnasium (approximately 600 square feet) and the Warehouse and Warehouse Storage Area (approximately 3,600 square feet total). All activities must be performed by licensed professionals using accredited laboratories and conducted in strict accordance with federal, State of Illinois, OSHA, and EPA regulations. This opportunity is open to small businesses, including certified VOSB, SDVOSB, WOSB, and HUBZone entities. Bidders must submit a completed bid sheet, a supplier packet containing a W-9 and self-certification, proof of insurance, and three references for similar projects by October 21, 2026. Award selection is based on best value. The successful contractor must comply with Service Contract Labor Standards, specifically Wage Determination 2015-5019 Rev 31, and adhere to strict government and Department of Labor guidelines regarding information security, privacy breach notifications, and mandatory training. Final acceptance of work is contingent upon the delivery of all waste manifests, laboratory reports, and a final project completion report.

POSTED

DEADLINE

Trace Organic Analysis Laboratory ServicesThis subcontract for Trace Organic Analysis Laboratory Services supports prime contractors on wastewater projects for the City of Atlanta Department of Watershed Management. The selected provider will perform laboratory testing of wastewater samples to verify compliance with industrial pretreatment program requirements and NPDES permits, adhering strictly to Georgia EPD and EPA standards. The contractor must hold NELAP or a state-equivalent certification to deliver certified data and laboratory analysis reports. This opportunity falls under NAICS code 541380, with a response deadline set for October 30, 2026.

POSTED

DEADLINE

Material Testing and Special InspectionsThis subcontract for East Texas A&M University involves providing third-party testing of construction materials and specialized inspections for prime contractors on university facility projects. The scope of work includes conducting soil compaction, concrete slump and strength, and weld testing, as well as performing special inspections to ensure compliance with applicable building codes. The selected provider must utilize an accredited testing laboratory and non-destructive testing tools to deliver certified material test reports and detailed inspection logs. Qualified contractors are required to hold ICC certifications to perform these specialized services. This opportunity is categorized under NAICS code 541380 and was posted on October 21, 2026, with a response deadline of November 6, 2026.

East Texas A&M University

POSTED

DEADLINE

Third-Party Materials Testing and InspectionThis subcontract for Third-Party Materials Testing and Inspection, issued by the Fulton County Purchasing Department in Georgia, involves providing independent testing and inspection of coatings for prime contractors on water storage projects. The scope of work includes inspecting surface profiles after blasting, measuring dry film thickness, conducting adhesion testing, and performing quality assurance inspections using holiday detectors and DFT gauges. Qualified providers must employ NACE/AMPP certified coating inspectors to ensure all standards are met and deliver detailed inspection reports and certifications of compliance. The solicitation was posted on October 21, 2026, with a response deadline of November 18, 2026, falling under NAICS code 541380.

Fulton County Purchasing Department

POSTED

DEADLINE

Environmental Laboratory Analysis and Technical Services

State of Rhode Island

POSTED

DEADLINE

Construction Inspection and Quality AssuranceThis subcontract for Construction Inspection and Quality Assurance involves performing on-site inspections of construction activities for prime contractors on City of Okeechobee projects. The primary objective is to ensure all work complies with engineering plans and specifications. Responsibilities include attending Technical Review Committee meetings and utilizing specialized field testing equipment and inspection software to monitor progress. Qualified candidates must be certified inspectors, with credentials such as ACI or NICET. Key deliverables for the contract include the submission of daily inspection reports, non-compliance reports, and final inspection sign-offs. The solicitation was posted on October 21, 2026, with a response deadline of November 6, 2026.

POSTED

DEADLINE

Non-Destructive Testing (NDT) and Hydrostatic CertificationThis subcontract, issued by the Department of Defense under the Navsup Weapon Systems Support Mech, involves providing specialized non-destructive testing and hydrostatic certification for critical safety items on Naval Sea Systems Command projects. The scope of work includes performing hydrostatic testing at 150 percent pressure, dye penetrant inspections, and quantitative chemical and mechanical analysis of titanium alloys to ensure structural integrity and safety compliance. Qualified contractors must hold a Confidential security clearance and possess ASNT Level II or III certifications to perform these technical evaluations. The primary deliverables for this engagement are certified test reports and detailed analysis data. Interested parties should note the response deadline of November 20, 2026, for this opportunity categorized under NAICS code 541380.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Specialized Aerospace Testing & CalibrationThis subcontract for Specialized Aerospace Testing and Calibration supports NAVSUP Weapon Systems Support projects by providing final testing and inspection of refueling probes for prime contractors. The scope of work involves conducting rigorous testing in accordance with approved repair and overhaul manuals, utilizing special test equipment and calibrated measurement tools that adhere to ANSI/NCSL Z540 or ISO-10012-1 standards. The selected provider is responsible for delivering comprehensive technical documentation, including detailed test reports, dimensional readings, and RFI certification. This effort falls under NAICS code 541380 and is managed under the Department of Defense.

Navsup Weapon Systems Support

POSTED

DEADLINE

Flight-Critical Module Testing and CertificationThe Flight-Critical Module Testing and Certification subcontract involves performing final testing and inspection of repaired NRP/NSPR Module Assemblies for prime contractors supporting Navsup Weapon Systems Support projects. The selected provider must execute testing procedures according to approved repair and overhaul manuals, utilizing calibrated measuring and test equipment that complies with NCSL Z540.3 or ISO 10012 standards. The primary deliverables for this engagement include detailed test reports and the certification of Ready For Issue status for every unit processed. This Department of Defense requirement falls under NAICS code 541380, with a response deadline set for November 20, 2026.

Navsup Weapon Systems Support

POSTED

DEADLINE

CSI Material Testing and Ultrasonic Inspection ServicesThe CSI Material Testing and Ultrasonic Inspection Services subcontract involves providing specialized non-destructive testing and laboratory analysis for prime contractors supporting the Department of Defense, specifically the NAVSUP Weapon Systems Support Mech. The scope of work focuses on the ultrasonic inspection of starting materials and the execution of slow strain rate tensile tests for Level I Special Emphasis material in accordance with DI-QCIC-81110 (SE) standards. To fulfill these requirements, the contractor must utilize professional ultrasonic testing equipment and laboratory-grade tensile machinery. Key deliverables for this engagement include the provision of detailed inspection reports, test certifications, and Certificates of Compliance. This opportunity falls under NAICS code 541380 and has a response deadline of November 20, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Non-Destructive Testing (NDT) and Survey

POSTED

DEADLINE

Non-Destructive Testing (NDT) and Quality CertificationThis subcontract focuses on providing Non-Destructive Testing (NDT) and quality certification services for prime contractors supporting the Department of Defense, specifically within the NAVSUP Weapon Systems Support Mech agency. The scope of work involves executing NDT procedures to ensure material compliance for Special Emphasis Level I safety requirements and conducting quality audits. The selected provider is responsible for preparing detailed records for DCMA and DCAA QAR review and delivering validated inspection records and test reports. To ensure technical accuracy and regulatory adherence, the contract mandates strict compliance with ISO/IEC 17025 and ANSI/NCSL Z540.3 standards. This opportunity falls under NAICS code 541380, with a response deadline set for November 25, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 6 hours ago

DEADLINE

in about 1 month

AI Contract Overview

The contract under solicitation number 36C26026Q0793 requires the processing of water samples for the Renal Dialysis Unit at the VA Puget Sound Health Care System in Seattle, Washington, with performance centered at 98108. The scope includes conducting Colony Forming Unit, LAL, AAMI, and Fluid Balance testing, all essential to meet the stringent safety standards mandated by the Association for the Advancement of Medical Instrumentation and equipment manufacturers to safeguard dialysis patients. This is a service-disabled veteran-owned small business set-aside under NAICS code 541380, and all bids must be submitted by the deadline of August 15, 2026. The offering is managed by the Department of Veterans Affairs through the 260-NETWORK Contract Office 20 based in Vancouver, Washington, with Eric A Lingenfelter identified as the primary point of contact for inquiries.

General Info

Water sample testing for VA Puget Sound dialysis unit, set-aside for service-disabled veteran-owned small business.

Agency

Department Of Veterans Affairs → 260-NETWORK Contract Office 20 (36C260)

Contract Value

$20,537.69

NAICS

541380 - Testing Laboratories and Services

Place of Performance

Seattle, WA, 98108, USA

Set-Aside

SDVOSBC

Awardee

D & D LABORATORY LLC

Award Issued Date

10/01/2026, 12:00:00 AM UTC

Documents

Attachment A 36C26026Q0793 Water Testing Items

rfq

High

RFQ 36C26026Q0793 Water Sample Processing for Renal Dialysis

rfq

High

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedAug 5

Combined Synopsis

Response DeadlineAug 15

Deadline has passed

Submission Closed

08/15/2026, 12:00:00 AM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Veterans Affairs → 260-NETWORK Contract Office 20 (36C260)

Contacts1 person available

OfficeVANCOUVER, WA, 98661, USA

Organization / AgencyDepartment Of Veterans Affairs → 260-NETWORK Contract Office 20 (36C260)

Office AddressVANCOUVER, WA, 98661, USA

Contacts

Eric A Lingenfelter

contact@example.gov

+1 (555) 000-0000

Full Description

This service contract will provide the processing of water samples for the Renal Dialysis Unit. This includes Colony Forming Unit, LALs, AAMI and Fluid Balance testing. These tests are required by the Advancement of Medical Instrumentation (AAMI) and by the manufacturers of equipment we use for the dialysis unit to ensure patient safety.