B6030 A/C Roof Sealant

The contract is for the application of a seamless, 80-mil, two-component aluminized polyurea spray-on roofing system over the existing roofs of Buildings 6030A and 6030C at Dyess Air Force Base, Texas, covering approximately 26,060 square feet. The work must extend fully to the roof edge and achieve a color match as close as possible to dark bronze, strictly adhering to the manufacturer’s specifications, the Statement of Work, and Attachment C, which details the aluminized polyurea roof coating system. The project requires extensive surface preparation including power washing, scraping, and scrubbing, with all Lightning Protection System components masked to prevent contamination. The final coating must meet strict performance standards including 85 ± 5 Shore A hardness, 225% ± 50% elongation, 2000 ± 200 PSI tensile strength, 250 ± PLI tear resistance, and permeability greater than 0.02 perm inch, all tested per ASTM standards. The contractor must arrange for a manufacturer’s inspection prior to warranty issuance and obtain third-party recertification of the Lightning Protection System in compliance with UFCs 3-110-03 and 3-575-01, with all test points tagged to the as-built roof plan. Any failed LPS components must be repaired at no additional cost to the government until certified. The contract is a total small business set-aside under NAICS code 238160, with evaluation based solely on lowest price technically acceptable. The period of performance is 120 calendar days from the Notice to Proceed, and all materials must arrive in manufacturer’s original unopened containers with full labeling including manufacturer, formula, lot number, color, date of manufacture, mixing instructions, shelf life, and curing time. Materials must be stored above 60°F, on wooden pallets, with drums rotated regularly and fitted with desiccants during use. MSDS must be on-site at all times. The contractor must provide temporary restrooms and power generation if needed, obtain approval for the lay-down area, and dispose of all debris off-base compliant with federal, state, and local regulations. Site access requires prior coordination for base entry, with a mandatory site visit on July 20, 2026, and a proposal submission deadline of August 6, 2026. Amendments have