Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

This Combined Synopsis/Solicitation opportunity from Department Of Defense was posted on August 20, 2023. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

BADGER METER PISTON PROVER CAL REPAIR & UPGRADE

Closed
N6426723Q0265Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811310
New
Kubota M8200 Clutch Replacement
Solicitation # kubota-m8200-clutch-replacement
Management and Training Corporation is soliciting lump sum fee proposals for the clutch replacement of a Kubota M8200 tractor with front wheel assist, located at the Earle C. Clements Job Corps Center in Morganfield, Kentucky. The scope of work requires a qualified contractor to provide all transportation, labor, materials, and equipment to diagnose and repair the clutch assembly and power take-off system. Key technical requirements include replacing friction discs, bearings, oil seals, and O-rings, resurfacing the flywheel, and replacing hydraulic pipes and filters as needed. The contractor must perform all work according to manufacturer specifications and provide a final summary of diagnostic findings, an itemized list of replaced parts, and warranty documentation upon completion. This solicitation is set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certified entities. Bids must be submitted via email to Angie Mahoney by 3:00 PM CST on November 3, 2026, and must include a bid sheet, proof of insurance, a completed supplier packet with a W-9, and applicable SBA certification letters. Award decisions will be based on best value, with a focus on administrative compliance and technical qualifications. The contract is subject to various Federal Acquisition Regulations, including standards for combating trafficking in persons, Buy American restrictions, and Service Contract Labor Standards per Wage Determination 2015-4687 Revision 31 for Kentucky.
Earle C. Clements Job Corps Center

POSTED

about 7 hours ago

DEADLINE

in 5 days
NAICS: 811310
New
SLED
SMDOT Elevator Maintenance
Solicitation # 12701633
The City of Santa Monica Department of Transportation (SMDOT) is soliciting bids for turnkey maintenance, inspection, and repair services for three hydraulic elevators located at 1620 6th Street. The equipment includes two passenger elevators and one freight elevator, specifically models AAK137, AA2986, and AEP227. The scope of work requires monthly systematic examination, lubrication, and repair of critical components, as well as monthly emergency recall and override testing in accordance with California Administrative Code Title 8, Section 3000(h). All provided materials must be new and meet Original Equipment Manufacturer standards. Bids must be submitted electronically via the OpenGov portal by December 3, 2026, at 3:00 pm. Qualified bidders must possess a valid C-11 California contractor's license and provide a maintenance supervisor to ensure compliance with safety requirements. The contract award is based on a weighted evaluation of experience and technical competence (25%), ability to meet work plans and timelines (25%), cost (20%), stability and references (10%), value add (10%), and quality control (10%). The City is not required to select the lowest monetary bidder. Key contractual requirements include a payment bond for awards exceeding 25,000 dollars, a Living Wage Certification for awards over 54,200 dollars, and compliance with the Oaks Initiative and ADA Title II. Successful bidders must provide a Certificate of Insurance naming the City of Santa Monica as an additional insured. Payment terms are net thirty days. The agreement includes an initial term with four subsequent annual renewal options.
D600 DEPT OF TRANSPORTATION - SaMoDOT

POSTED

about 15 hours ago

DEADLINE

in about 1 month
NAICS: 811310
New
SLED
CNG Fueling Station Maintenance and Repair Services
Solicitation # 2026-RFP-0441
The County of Sacramento is soliciting proposals under solicitation 2026-RFP-0441 to establish a contract for Compressed Natural Gas (CNG) fueling station preventative maintenance and repair services. The contract covers two facilities located at the Fleet Services Division and the Department of Airports. The selected contractor must provide certified CNG technicians to perform twice-monthly preventative maintenance and major services at 4,000 and 8,000-hour benchmarks. Service requirements include 24/7 availability, with on-site response times mandated within 48 hours for standard service calls and 24 hours for emergency calls. All work must adhere to manufacturer specifications and Cal/OSHA safety standards, including the provision of GHS Safety Data Sheets. The contract is designed for an initial one-year term with the option for four additional one-year extensions upon mutual agreement, with a scheduled award date of December 14, 2026. Award decisions will be based on factors other than price alone, utilizing a points-based scoring system that evaluates cost and the proposer's technical approach. Bidders must provide a Public Works and Prevailing Wage Contractor Registration number and are encouraged to utilize the County's Procurement Opportunities Program for small and micro-business preferences. Proposals must be submitted electronically via the SacCountyE bids portal by the final extended deadline of November 13, 2026.
DGS: CAPSD - Procurement

POSTED

about 15 hours ago

DEADLINE

in 15 days
NAICS: 811310
New
SLED
ELEVATOR & ESCALATOR MAINTENANCE, INSPECTIONS, AND TESTING
Solicitation # BPM059230
The Maryland Department of Transportation Maryland Transit Administration (MDOT MTA) is soliciting bids for a firm-fixed-price contract, AGY-26-001-MT, to provide comprehensive maintenance, inspection, and testing for elevators, escalators, and wheelchair lifts across various Metro stations in Maryland. The scope of work includes systematic preventive maintenance, emergency repairs, and deep cleaning to ensure all equipment remains in first-class operating condition in accordance with ASME A17.1 and A17.2 standards. The contract features a five-year base period with a total basis of award calculated at 4,750,000 dollars, which includes a 950,000 dollar allowance for reimbursable parts and materials. Bidders must maintain an operational office within 20 miles of Baltimore and provide certified mechanics with at least three years of documented experience. Award will be granted to the responsible bidder offering the lowest total price. Key procurement goals include a 17 percent Minority Business Enterprise (MBE) and a 1 percent Veteran-owned Small Business Enterprise (VSBE) participation rate. Bidders must possess at least three years of firm experience with comparable equipment and provide proof of significant insurance coverage, including 1 million dollars in general liability and 5 million dollars in pollution liability. Bids are due by November 12, 2026, and must include a bid bond, a contract affidavit, and detailed pricing for preventive maintenance and hourly labor rates. Performance is measured by the completion of specific checklist tasks rather than labor hours, and the contractor is required to submit safety reports within 24 hours of any incident.
Maryland Transit Administration

POSTED

about 16 hours ago

DEADLINE

in 14 days
NAICS: 811310
New
SLED
WOOHDR30R - Overhead Door Repairs and Maintenance - MDOT/SHA Worcester County
Solicitation # WOOHDR30R
Solicitation WOOHDR30R is an Invitation for Bids issued by the Maryland State Highway Administration for the preventative maintenance and repair of 27 overhead doors and their related operators at the Worcester County Shop locations in Snow Hill and Berlin. The scope of work requires semi-annual 20-point inspections and on-call repair services with a mandatory response time of four business days. All repairs must be performed by technicians with at least two years of experience, adhere to manufacturer specifications and building codes, and utilize new, first-quality parts. The contractor is required to provide a not-to-exceed cost quotation before performing any repair work and must submit detailed written reports following each service visit. The contract will be awarded to the responsive and responsible vendor offering the lowest total bid price. To qualify, bidders must demonstrate at least two years of continuous professional experience in overhead door services, be registered with the State Department of Assessments and Taxation, and possess their own employees, equipment, and vehicles without the use of subcontractors. Required submission documents include the eMMA Price Form, a Bid/Proposal Affidavit, and reference checks from the last five years. Payment is processed through the Snow Hill Shop, with specific billing requirements for trip charges, manlift usage, and materials priced at or below retail cost or MSRP. All work must comply with MOSH and OSHA safety regulations.
State Highway Administration

POSTED

about 17 hours ago

DEADLINE

in 20 days
NAICS: 811310
New
SLED
26WS0011-Floor Care Equipment Preventative Maintenance and Repair Services
Solicitation # 26WS0011
Solicitation 26WS0011 is issued by the California Department of Veterans Affairs (CalVet) for a contractor to provide comprehensive preventative maintenance, inspection, repair, and operational support for commercial floor care equipment in Los Angeles, California. The scope of work covers a fleet of carpet extractors, auto scrubbers, floor machines, and specialty vacuums. The contractor is responsible for providing all necessary labor, materials, and transportation, though consumable supplies like chemicals and batteries are excluded unless specifically authorized. Key performance standards include a two-hour onsite response for emergencies, a one-business-day response for non-emergencies, and a 100% completion rate for scheduled preventative maintenance. The contract will be awarded to the lowest responsible bidder, with a five percent preference given to certified Small or Micro businesses and a priority award to Disabled Veteran Business Enterprises (DVBE) in the event of a tie. Bidders must submit their proposals via email by November 16, 2026, including a completed Rate Sheet, Bidder Certification form, and a valid California business license. The contractor must maintain a Commercial General Liability insurance policy of at least $1,000,000 per occurrence and employ qualified technicians. Payment is processed through monthly invoices submitted to the CalVet Contract Manager, with a $10,000 withholding from the final payment for prime contractors until DVBE subcontracting reports are certified.
California Department of Veterans Affairs

POSTED

about 17 hours ago

DEADLINE

in 19 days

General Info

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

Place of Performance

CA, EGY

Set-Aside

NONE

Documents

1

N6426723Q0265 - Piston Prover Program Hardware and Services

PDF, High priority: read this firstrfq
High

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed
Posted

Combined Synopsis

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Naval Surface Warfare Center
Contacts1 person available
OfficeNORCO, CA, 92860, USA
Office AddressNORCO, CA, 92860, USA

Full Description

Show more
This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2023-03. The provisions at 52.212-1, 52.212-3 and the clauses at 52.212-4, 52.212-5 apply to this acquisition; no addenda are attached. The Naval Surface Warfare Center (NSWC) Corona Division intends to use other than full and open competition to award a sole source Firm Fixed Price (FFP) contract to Badger Meter Inc. This is an all-or-none requirement and partial quotes will be deemed unresponsive and will not be evaluated. The Government will award on a single purchase order to the responsible Offeror whose offer conforms to the requirements as stated in the Solicitation and is most advantageous to the Government based on the criteria listed in section L and section M of the Solicitation. Interested parties may identify their interest and capability to respond to the requirement, or by submitting capability statements. This notice of interest is not a request for competitive quotes. Offerors must be registered in SAM and all responsible sources may submit a quotation which, if timely received, will be considered by the Agency. Quotes are due no later than the response date in the posting. Responses/offers shall be submitted electronically, PDF or MS Word Format to email address in the posting. Any amendment(s) issued to this Request for Quote (RFQ) will be published on this website. Therefore, it is the Offerors responsibility to visit this website frequently for updates on this procurement. No telephone requests.

More opportunities from Department Of Defense → Naval Surface Warfare Center

Same awarding agency

NAICS: 334516
New
Federal
Low-Range Force Frame Kit
Solicitation # N6426726R1010
Solicitation N6426726R1010 is a request for proposals for a five-year Indefinite Delivery/Indefinite Quantity (IDIQ) contract to procure Low-Range Force Frame Kits (FFK) for the Naval Surface Warfare Center, Corona Division. The contract covers a minimum of two and a maximum of 45 kits, which serve as standardized platforms for mounting and calibrating handheld force gages, spring gages, and dynamometers. Technical requirements are governed by Calibration Standards Specification (CSS) 06-3228 and MIL-PRF-28800G environmental classifications. Key deliverables include the hardware, operator and service manuals (CDRL T001), and a repairable parts list (CDRL A001), with a required delivery window of 120 calendar days from the issuance of a delivery order. The basis of award is Lowest Price Technically Acceptable (LPTA), evaluating offers based on technical acceptability, past performance from the last three years, and total price calculated as the unit price for 45 kits. Offerors must provide a single firm-fixed unit price applicable for the entire five-year period, submitted as FOB Destination. Proposals must be submitted electronically via the PIEE Solicitation Module by November 4, 2026. Required submission documents include a completed cross-reference matrix, a statement of acceptance for delivery lead times, and a small business subcontracting plan for non-small business concerns. All shipments must comply with MIL-STD-129 and MIL-STD-130 for marking and unique item identification.
Analytical Laboratory Instrument Manufacturing

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 541330
New
Federal
Mission Module Engineering and Technical Services
Solicitation # N6133127R0006
Solicitation N6133127R0006 is a Small Business Set-Aside request for proposals under the Seaport NxG Multiple Award Contract (MAC), restricted exclusively to Seaport MAC holders. The contract supports the Naval Surface Warfare Center Panama City Division (NSWC PCD) Modular Integration Division in providing engineering, analysis, and planning for the modularization of off-board systems within the littoral warfare mission area, specifically for the Littoral Combat Ship (LCS) Mission Modules program. The scope of work encompasses systems engineering, sea frame integration of mission modules, packaging and handling of hardware, development of common computing environments and communications networks, and distributed engineering testing to support government validation and verification. The contract structure consists of a base year and four option years, with labor requirements estimated at 88,657 hours per year. Award will be determined based on best value, utilizing a tradeoff analysis between technical capability and total evaluated cost. Technical proposals are evaluated using adjectival ratings, while past performance is assessed on an acceptable or unacceptable basis. Performance is measured against specific objectives and quality standards, requiring compliance with ISO 9001:2015. All proposals must be submitted via the PIEE Solicitation Module by the December 3, 2026, deadline.
Engineering Services

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 334513
New
Federal
Small Business Set-Aside for for Mensor, LP Brand Sensors Per Attachments
Solicitation # N61331-27-Q-JK01
The Naval Surface Warfare Center Panama City Division is soliciting quotes for a firm fixed price, Small Business Set-Aside contract to acquire Mensor brand precision pressure indicators (Model CPG2500) and pressure transducers (Model CPT6100). This equipment is required for the Navy Experimental Diving Unit to integrate with N31 hyperbaric chamber systems, gas supply panels, and life support equipment. All hardware must include English operating instructions on USB, Certificates of Conformance, and A2LA-Calibration certificates traceable and accredited according to ISO 17025. The estimated value of the procurement is greater than 25,000 dollars. Quotes must be submitted on company letterhead with full OEM specifications, CAGE code, and lead time to [email hidden] by 11am Central Time on October 29, 2026. The email subject line must begin with the solicitation number N61331-27-Q-JK01 and the vendor name. Award will be based on the best value to the government, considering price, delivery, quality, and past performance via the Supplier Performance Risk System. Selected vendors must be capable of invoicing through Wide Area Workflow under NET 30 terms. Shipping should be listed as a separate line item if not included in the unit price. Deliveries to the Navy Experimental Diving Unit in Panama City, Florida, are restricted to Monday through Friday between 0900 and 1430 local time.
Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

3 days ago

DEADLINE

in about 3 hours
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS