Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

BAFFLE, STEERING CLU

Active
SPE7L3-26-T-150EFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of 11 units of a Baffle, Steering Clutch Bearing Hub with NSN 2520-00-337-6885 under solicitation SPE7L3-26-T-150E, with a firm delivery requirement of five days after award. Full and open competition applies, and the item is subject to strict technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with compliance tied to the revision in effect on the solicitation issue or award date. The item must not contain any Class I ozone-depleting chemicals, and substitute materials require prior approval unless explicitly authorized. Export control regulations under ITAR or EAR apply to associated technical data, restricting dissemination to authorized parties, including U.S. contractors with approved JCP certification, completed training on handling DOD export-controlled data, and DLA authorization. The contractor must adhere to cybersecurity requirements mandating CMMC Level 2 certification, follow configuration change management procedures via Engineering Change Proposals, and comply with tailored quality assurance standards, including inspection and acceptance at origin. Packaging, marking, and shipping must conform to hazardous materials regulations and DLA packaging guidelines, and government identification must be removed from non-accepted supplies. All technical data is safeguarded under DFARS 252.225-7048, and any deviation or waiver requests must be formally submitted for review.

General Info

Procure 11 Baffle Steering Clutch Bearing Hubs, delivery in 5 days, CMMC Level 2, ITAR/EAR controlled, no ozone-depleting chemicals.

Agency

Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPTView Agency

NAICS

336350 - Motor Vehicle Transmission and Power Train Parts ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(1)

RFQ SPE7L3-26-T-150E for DLA Land and Maritime Vehicle Support

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLIER OPNS VEHICLE SPT
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT
View Agency Profile
Office AddressUS
Contacts
LEE MILLER
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BAFFLE,STEERING CLU
BAFFLE, STEERING CLUTCH BEARING HUB.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
STEEL.
FULL AND OPEN COMPETITION APPLY
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
RD002, COVERED DEFENSE INFORMATION APPLIES
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO)
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND NON-MANUFACTURERS)
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ032: EXPORT CONTROL OF TECHNICAL DATA
SPE7L3-26-T-150E
SECTION B
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 2520-00-337-6885 Quantity: 11 EA Purchase Request: 7017497900QTY: 11 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336350
New
DIBBS
PIN, SLIDER
Solicitation # SPE7L1-26-T-918C
The contract is for the procurement of 24 units of PIN, SLIDER with NSN/Part Number 2520-01-361-8580 under solicitation SPE7L1-26-T-918C, issued by the Department of Defense’s Land Supply Chain through the Defense Logistics Agency. The requirement is for delivery within five days of award and falls under the NAICS code 336350, indicating a focus on automotive parts and accessories manufacturing. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with the controlling revision determined by the solicitation issue date for simplified acquisitions. The item includes technical data subject to export controls under either ITAR or EAR, restricting all disclosures to foreign persons regardless of location and requiring compliance with DFARS 252.225-7048. Access to this controlled data is limited to contractors with approved US/Canada Joint Certification Program certification, completion of mandatory DLA export control training, and formal approval from DLA. The solicitation was posted on August 5, 2026, with responses due by August 17, 2026, and the primary point of contact is Kristina Derry at kristina.derry@dla.mil.
LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336350
New
DIBBS
UNIVERSAL JOINT, VEHICU
Solicitation # SPE7L3-26-T-148T
The contract is for the procurement of 18 vehicular universal joints conforming to MIL-DTL-20625C specification and associated technical data packages referenced by revision levels and part numbers, with a total contract value of $324.000 at $18.000 per unit. Delivery is required within 71 days after the issuance of an actual delivery order, with FOB origin terms, meaning risk and responsibility transfer upon delivery to the carrier at the contractor’s location. Final inspection and acceptance occur at the destination, specifically the DLA Distribution Facility in New Cumberland, Pennsylvania. Packaging must comply strictly with MIL-STD-2073-1E and DLA Packaging Requirements for Procurement, with military-grade preservation methods, prohibited use of mercury or mercury compounds, and mandatory marking per MIL-STD-129 including Data Matrix and UCC/UPC barcodes. A prototype package must be submitted and validated against the SPI number 10953657 Revision C. Sampling for quality verification follows MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless specified otherwise, and attributes are assigned verification levels of VII, IV, and II for critical, major, and minor characteristics respectively. The product must not contain Class I ozone-depleting chemicals, and any substitute chemicals require prior approval. The contractor is required to comply with CMMC Level 2 self-assessment for safeguarding covered defense information and adhere to NIST SP 800-171 requirements under a deviation. Cybersecurity protections are enforced via FAR Clause 252.204-7012, and the contractor must also comply with prohibitions on hexavalent chromium, hazardous materials labeling per OSHA and MIL-STD-129, and exclusion of Communist Chinese Military Companies from supply chains. Quality assurance provisions include tailored higher-level requirements, formal configuration change management through engineering change proposals or variance requests, and reliance on SAE AS9003 or ISO 9001 tailored to AS9003 for the manufacturer’s inspection system. Invoicing must be submitted through Wide Area WorkFlow with no alternative invoicing methods authorized. The contract is awarded under full and open competition with no set-aside designation, and all offerors must provide a UEI and CAGE code while representing their small business status if applicable. Contract administration is governed by clauses covering employment eligibility
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336350
New
DIBBS
BOOT, POWER TRANSMISSIO
Solicitation # SPE7LX-26-U-9293
The contract is for the procurement of 500 kits of BOOT, POWER TRANSMISSION COMPONENTS, identified by NSN 2520-01-474-5708, under an Indefinite Delivery Contract (IDC) issued by the Strategic Acquisition Program Directorate of the Department of Defense. The solicitation number is SPE7LX-26-U-9293, with a response deadline of August 20, 2026, and a delivery requirement of 139 days after order placement. All items must be delivered FOB Origin with no quantity variance allowed, and inspection and acceptance occur at the destination. Each kit must include a detailed parts list with part names, numbers, and quantities, and must be packaged and preserved in strict accordance with MIL-STD-2073-1E Appendix D for kits, ensuring the highest applicable preservation method is applied to prevent corrosion or damage, especially to the most critical component. All loose hardware must be sealed within individual containers and cannot be shipped in bulk to avoid additional sorting by the Government. Packaging must adhere to RP001 DLA Packaging Requirements and marking must follow MIL-STD-129, including mandatory barcoding and the special marking code "OPEN THIS SIDE." The unit of issue is "KT" (kit), and the contract maximum value is capped at $350,000.00. Mercury and mercury-containing compounds are strictly prohibited except in specified functional applications such as batteries, fluorescent lights, sensors, controls, weapon systems, and chemical reagents approved by NAVSEA, with portable devices required to have a secondary containment barrier per NAVSEA 5100-003D. Class I ozone-depleting chemicals are banned from inclusion in any supplied items. Hazardous materials must be labeled per OSHA Hazard Communication Standard and FDA regulations, with advance notification of radioactive materials required, and transportation by sea is restricted to U.S.-flagged vessels unless a waiver is granted. All items are classified as commercial items. The contractor must comply with FAR and DFARS clauses addressing equal opportunity, trafficking in persons, employment eligibility verification, sustainable products, cybersecurity safeguards, safeguarding covered defense information, NIST SP 800-171, cyber incident reporting, and subcontracting for commercial products. The contract requires a Unique Entity Identifier (UEI) and CAGE code, and all offerors must provide size status and socioeconomic certifications where applicable. In
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336350
New
DIBBS
TRANSMISSION, DRESSE
Solicitation # SPE7L5-26-T-4766
This contract solicits two units of a transmission assembly, identified by NSN 2520-01-502-8809 and part number 3465399, under solicitation SPE7L5-26-T-4766, issued by the Defense Logistics Agency. Delivery is required within 56 days to the DLA Distribution facility in New Cumberland, Pennsylvania, on or before October 13, 2026, with FOB origin terms and no variance permitted in quantity. The item must comply with DLA packaging requirements as outlined in RP001 and MIL-STD-2073-1E, including specific preservation methods using code ZZ to prevent corrosion on all bare metal surfaces and proper lubrication of moving parts. Items must be individually packaged, with cushioning and blocking materials selected by the contractor to meet performance standards, ensuring no movement during transit. Marking must adhere to MIL-STD-129 with the special code ZZ indicating “Arrow Up – Open This Side – Mechanical Handling Required.” The transmission is subject to a restricted technical data license from Oshkosh Defense, LLC requiring non-disclosure and data destruction protocols, and the use of Class I ozone-depleting chemicals is strictly prohibited. The contract incorporates technical and quality requirements referenced from the DLA Master List, with revisions controlled by the solicitation issue date. The unit of issue is each (EA), priced at $2.00 per unit, totaling $4.00. Inspection and acceptance occur at destination, and all packaging must include protective preservation unless prohibited due to potential damage, difficulty of removal, or incompatibility with operational fluids. The delivery address and shipping instructions are identical, and transportation details are governed by DLA Procurement Notes C19 and C20. The solicitation is classified under NAICS code 336350, managed by the Department of Defense’s Land Supplier Ops Engines office, with Bradley Evans listed as the primary point of contact. Contractors must complete and submit the required forms via the DLA TDMT portal to comply with Oshkosh Defense’s licensing terms.
LAND SUPPLIER OPNS ENGINES

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336350
New
DIBBS
CONTROL ASSEMBLY, TRANS
Solicitation # SPE7LX-26-U-9291
The contract solicitation SPE7LX-26-U-9291 seeks the procurement of a transmission control assembly, identified by part number 29538371 and NSN 2520-01-459-1944, under an Indefinite Delivery Contract (IDC) with a maximum value of $350,000.00. The estimated quantity of 138 units is non-firm and subject to individual delivery order placement, with a 28-day delivery requirement upon order issuance and FOB Origin shipping terms. The item is classified as a commercial item and critical application item, sourced exclusively from Allison Transmission Inc., and governed by a source-controlled drawing NR 19207 12421786 with revision dates indicating current technical baselines. Compliance with MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements is mandatory, with special handling for protected cargo under code ZZ requiring omission of item nomenclature on shipping containers per security protocols. All packaging must adhere to DLA Packaging Requirements for Procurement and include specified preservation methods, intermediate containers, and unit packaging details. The contract imposes strict environmental and material prohibitions, expressly banning the intentional use of mercury or mercury-containing compounds except in specified exempted applications such as batteries, fluorescent lamps, sensors, and weapon systems, all of which must meet NAVSEA 5100-003D standards for containment and safety. Class I ozone-depleting chemicals are strictly forbidden regardless of any conflicting specification language. The solicitation is designated as a Total Small Business Set-Aside under NAICS 336350, requiring offerors to self-certify their small business status and provide Unique Entity Identifiers through SAM. Numerous FAR and DFARS clauses are incorporated, including those related to combating human trafficking, employment eligibility verification, sustainable products, safeguarding covered defense information, cyber incident reporting, and restrictions on covered defense telecommunications equipment. Acceptance occurs at the destination, with inspection and quality assurance aligned with technical requirements from the DLA Master List of Technical and Quality Requirements. Electronic invoicing via WAWF is required, and all submissions must be filed through the DIBBS portal by the August 20, 2026 deadline.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336350
New
DIBBS
SELECTOR, RANGE, TRAN
Solicitation # SPE7L3-26-T-149Y
The contract is for the procurement of 20 units of a Selector, Range, TRAN with NSN 2520-00-104-4604 under solicitation SPE7L3-26-T-149Y, issued by the Department of Defense’s Land Supplier Operations Vehicle Support. This is a total small business set-aside with a response deadline of August 17, 2026, and a required delivery within five days after award. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by either the solicitation or award date depending on the acquisition size. Manufacturing and non-manufacturing suppliers must comply with tailored higher-level quality requirements and configuration change management procedures, including formal requests for deviations or waivers. Components subject to Qualified Products Lists or Qualified Manufacturers Lists must be sourced from qualified sources, and inspection and acceptance may occur at the origin. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels or AQLs based on criticality. The contract includes mandatory compliance with export control regulations under ITAR or EAR, prohibiting unauthorized disclosure of technical data to foreign persons regardless of location, and restricting access to contractors with JCP certification, completion of DOD export training, and DLA approval. Contract Data Requirements List CDRL-81361CARPH-17272 is included in the Technical Data Package, and all associated costs for data deliverables must be factored into the unit price without separate pricing. Covering defense information applies under RD002, and government identification must be removed from non-accepted supplies per RQ011. Packaging must adhere to DLA requirements, and certificates of conformance are authorized unless overridden by a quality assurance letter. The solicitation is fully open to competition, and the contract is managed by point of contact Lee Miller via email and phone provided, with all documents and training resources accessible through DLA’s official web portal.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336350
New
DIBBS
Manufacture of Propeller Shaft with Universal Joint
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

1 day ago

DEADLINE

in 13 days
View Details
NAICS: 336350
New
DIBBS
CONTROL ASSEMBLY, TRANS
Solicitation # SPE7LX-26-U-9233
The contract solicitation SPE7LX-26-U-9233 seeks the procurement of 317 units of a Transmission Control Assembly (NSN 2520-01-554-9359) under an indefinite-delivery contract with a maximum value of $350,000.00. Delivery must be completed within 52 days of order placement, with inspection and acceptance occurring at the origin point, and FOB Origin terms apply. The item is source-controlled, meaning only the manufacturers listed on the referenced drawing are currently approved, though additional qualified sources may exist. The contractor must comply with strict packaging and marking standards per MIL-STD-2073-1E and MIL-STD-129, including specific coding for unit packages, palletization per DLA RP001, preservation method 41 (CLNG/DRY), and hazard labeling in accordance with OSHA’s Hazard Communication Standard and MIL-STD-129. Barcoding must follow GS1 standards, and all shipments must be properly labeled with NSN, contract number, lot number, CAGE codes, and part number. The contract imposes robust cybersecurity and export control requirements, mandating CMMC Level 2 certification for the offeror and adherence to DFARS 252.204-7012 for safeguarding covered defense information and reporting cyber incidents. Technical data associated with the item is subject to ITAR or EAR export controls, and access is restricted to entities with approved US/Canada Joint Certification Program certification, completed DLA export training, and DLA authorization. The contractor must also comply with DFARS 252.223-7006 and 252.223-7008 prohibiting toxic materials and hexavalent chromium, and must submit Safety Data Sheets prior to award. Electronic invoicing is mandated through WAWF, and payment is subject to electronic submission requirements. All subcontracting must comply with DFARS clauses governing commercial products and services, and the contractor must affirm its size status and socioeconomic category, including representation for small business, HUBZone, or WOSB status. Additionally, the contractor is prohibited from using telecommunications equipment from designated foreign entities, must provide whistleblower protections to employees, and must notify the contracting officer in advance if radioactive materials are involved. Failure to meet any of these technical, quality, cybersecurity, or regulatory obligations may result in non-accept
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

1 day ago

DEADLINE

in 13 days
View Details
NAICS: 336350
New
DIBBS
DISC CLUTCH
Solicitation # SPE7L1-26-T-913X
The contract is for one DISC CLUTCH with NSN 2520-01-133-8270 and part number 1677000C91, procured under solicitation SPE7L1-26-T-913X for the Department of Defense through the Land Supply Chain. The item must be delivered within five days of award, FOB origin, with no variance allowed in quantity, and accepted at the destination. Packaging must comply with MIL-STD-2073-1E, including preservative method 20, drying, and wrapping in government-standard materials, with marking per MIL-STD-129 and no special marking codes. The shipment must be palletized according to DLA packaging requirements and delivered to Fort Bragg, North Carolina, using traceable freight methods—parcel post is prohibited. The item is designated as a RDD shipment and must be shipped using approved traceable logistics. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced in the document. The contract specifies the point of contact as Kristina Derry, and the required delivery date is August 4, 2026, with a response deadline of August 17, 2026. The NAICS code is 336350, indicating classification under motor vehicle parts manufacturing.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 336350
New
DIBBS
PROPELLER SHAFT WITH U
Solicitation # SPE7L1-26-T-916G
The contract is for one propeller shaft with a universal joint, identified by NSN 2520-01-349-4036 and purchase request 7017720118, with a required delivery within five days of award and a specified delivery point at Camp Grafton, Devils Lake, North Dakota. The item must be delivered FOB origin, with no tolerance for quantity variance, and shipped via traceable means excluding parcel post. All packaging and marking must comply with DLA packaging requirements and MIL-STD-129, and hazardous material packaging must adhere to IP025 if applicable under FED-STD-313; otherwise, commercial packaging per ASTM D3951 is acceptable, but only if not superseded by higher-priority DLA Master List requirements. Ozone-depleting chemicals are strictly prohibited, and any substitute chemicals require prior approval. The unit of issue is each, and the contract references DLA’s technical and quality requirements that govern material, processing, and documentation standards. Delivery must be made to the specified military logistics address, with shipment tracking and labeling instructions provided through the DLA system. The contract number is SPE7L1-26-T-916G, with a required delivery date of August 3, 2026, and the point of contact is Kristina Derry of the Land Supply Chain under the Department of Defense.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 336350
New
DIBBS
PROPELLER SHAFT WITH U
Solicitation # SPE7L4-26-U-1054
The contract solicitation SPE7L4-26-U-1054 is for the procurement of 85 Propeller Shafts with Universal Joints, identified by NSN 2520015662615, under a Total Small Business Set-Aside for NAICS code 336350. Deliveries are required within 81 days of award, with FOB Origin terms and no variance allowed in quantity—85 units is the exact requirement with no flexibility for over or under shipment. Inspection and acceptance occur at the destination, performed by the Government, and all items must conform to MIL-STD-2073-1E for packaging and preservation, including specific methods for cleaning, drying, preservation materials, and container types as detailed in the packaging data. Marking and labeling must adhere strictly to MIL-STD-129, with no special markings required. The contract incorporates by reference the DLA Master List of Technical and Quality Requirements, including RP001 for packaging standards and RQ011 for removal of government identification from non-accepted supplies. The solicitation includes a comprehensive set of FAR and DFARS clauses requiring compliance in areas such as employment equity, human trafficking prevention, electronic verification of employment eligibility, sustainable product procurement, hazardous material identification and safety data submission, cybersecurity safeguards including NIST SP 800-171 and safeguarding covered defense information, small business representation, and prohibitions on certain contractual confidentiality agreements. Contractors must use WAWF for invoicing and payment processing and are required to register at wawf.eb.mil. The contract allows for an indefinite delivery vehicle under the simplified acquisition threshold and has a maximum value cap of $350,000, though the estimated quantity of 85 units at historical pricing suggests a lower expected value. All offerors must maintain an active UEI and CAGE code, and small business representation is mandatory under the set-aside provisions. Hazardous materials, if any, must be labeled per the Hazard Communication Standard or applicable federal statutes, with prior disclosure and label submission required before award. No formal evaluation factors or award criteria are listed in the document, indicating an LPTA process is likely, and all submissions must be made electronically through DIBBS with no paper alternatives permitted.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 336350
New
Federal
Manufacture of PTO Clutch Sub-AssemblyThe contract requires the design, fabrication, and assembly of a Power Take-Off clutch sub-assembly specifically engineered to interface with the Oshkosh P-19 ARFF vehicle, ensuring full operational compatibility and performance under demanding conditions. The sub-assembly must meet or exceed original equipment manufacturer specifications and stringent military durability standards to ensure reliability in high-stress, emergency response environments. All work must adhere to technical requirements that guarantee longevity, safety, and seamless integration with existing vehicle systems without requiring structural or mechanical modifications to the host platform. Performance of this subcontract is centered at Minot Air Force Base, with all deliverables expected to be completed and validated before the response deadline of August 11, 2026. The work falls under NAICS code 336350, indicating it is classified within the aerospace product and parts manufacturing sector, and is directly tied to the Department of Defense through the contracting office FA4528 5 Cons. Although no specific set-aside provisions are listed, the effort is critical to sustaining military firefighting capabilities and requires precision engineering, rigorous quality control, and comprehensive documentation to support future maintenance and audits.
FA4528 5 Cons

POSTED

2 days ago

DEADLINE

in 5 days
View Details

More opportunities from Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

Same awarding agency

NAICS: 493190
New
DIBBS
Military Packaging & Preservation ServicesThe contract requires the packaging and preservation of gaskets in strict compliance with MIL-STD-2073-1E, emphasizing climate-controlled drying processes and UV-protective bagging to ensure long-term integrity and environmental resilience. All packaging must adhere to MIL-STD-129 requirements for labeling and barcoding, ensuring traceability and seamless integration into military logistics systems. The work is to be performed at the designated place of performance in New Cumberland, Pennsylvania, with a zip code of 17070-5002, and is classified as a subcontract under NAICS code 493190. The opportunity was posted on August 5, 2026, with a response deadline of August 17, 2026, and is managed by the Department of Defense under the Land Supplier Operations Vehicle Support agency. All submissions must meet the exacting standards for defense-grade packaging without exception, and the contract is open to eligible subcontractors through the DIBBS platform.
Other Warehousing and Storage

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance & SDS ManagementThe contract requires the identification and thorough documentation of hazardous materials contained within gaskets or packaging, with strict adherence to regulatory standards including OSHA, DFARS, and Federal Standard No. 313. This involves accurately determining the presence, composition, and classification of hazardous substances and preparing Safety Data Sheets that fully comply with all applicable federal and defense acquisition requirements. The work must ensure complete traceability and regulatory alignment to support safe handling, transportation, and disposal throughout the supply chain. The solicitation is issued under the NAICS code 541690 for other scientific and technical consulting services, classified as a subcontract with a response deadline of August 17, 2026. The performance location is specified as New Cumberland, Pennsylvania, 17070-5002, with the contracting activity under the Department of Defense through the Land Supplier Operations Vehicle Support office. While no specific point of contact is provided, bidders must submit their proposals through the DIBBS platform at the designated URL before the deadline to be considered for award.
Other Scientific and Technical Consulting Services

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
Precision Gasket Manufacturing & SupplyThe contract requires the manufacture and supply of 119 gaskets identified by NSN 5330012307033, fully compliant with military specifications governing material, dimensional accuracy, and performance under operational conditions. All units must adhere to zero-defect inspection standards, ensuring every gasket meets exacting quality benchmarks before acceptance. Packaging and preservation protocols must align with defense logistics requirements to prevent degradation during transit and storage, with documentation confirming adherence to these standards submitted with delivery. The contract is a subcontract under the Department of Defense, managed by LAND SUPPLIER OPNS VEHICLE SPT, with performance located in New Cumberland, Pennsylvania, 17070-5002. It was posted on August 5, 2026, with responses due by August 17, 2026, and falls under the NAICS code 332999 for other fabricated metal product manufacturing. The solicitation is accessible through the DIBBS platform, and successful bidders must demonstrate capacity to deliver defect-free components on schedule while complying with all federal defense procurement regulations.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332112
New
DIBBS
Precision Machined Mounting Plate SupplyThe contract requires the manufacture and delivery of 30 precision-machined mounting plates in full compliance with military specifications covering material composition, dimensional tolerances, and mandatory marking requirements. All units must meet strict quality and performance standards dictated by defense industry norms to ensure interoperability and reliability in military vehicle systems. The work is classified as a subcontract under NAICS code 332112 and is being procured by the Department of Defense through its Land Supplier Operations Vehicle Support division. Proposals must be submitted by the deadline of August 17, 2026, with the solicitation originally posted on August 5, 2026. The place of performance and point of contact details are not specified, but all deliveries and compliance certifications are expected to align with federal defense contracting protocols and traceability requirements.
Nonferrous Forging

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332721
New
DIBBS
Supply of Wiper Ring (NSN: 5330017297530)The contract calls for the procurement and delivery of six precision machined wiper rings identified by NSN 5330017297530, to be supplied as a commercial off-the-shelf item. All units must meet military standards for marking, packaging, and hazardous materials labeling to ensure compatibility and safety in defense logistics systems. The items are intended for use by the Department of Defense through the Land Supplier Operations Vehicle Support organization, with performance required at the designated location in New Cumberland, Pennsylvania, zip code 17070-5002. The solicitation is structured as a subcontract under NAICS code 332721, which pertains to forging and stamping operations, indicating the manufacturing process involved. The opportunity was posted on August 5, 2026, with responses due by August 17, 2026, and is accessible via the DIBBS platform for qualified suppliers to submit proposals.
Precision Turned Product Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541620
New
DIBBS
Sustainable Products & Environmental ComplianceThis contract requires strict adherence to environmental compliance standards for all materials and processes, with a focus on eliminating the use of Class I ozone-depleting substances. Any substitution of chemicals must receive prior approval to ensure alignment with environmental regulations and sustainability goals. The work is positioned under the NAICS code 541620, indicating services related to environmental consulting and engineering, and is structured as a subcontract under the Department of Defense’s Land Supplier Operations Vehicle Support organization. Performance is designated for San Diego, California, with a firm deadline for responses on August 17, 2026, and the solicitation was posted on August 5, 2026. Compliance is non-negotiable, and failure to meet environmental mandates could result in contract non-performance or termination.
Environmental Consulting Services

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334220
New
DIBBS
Defense Telecommunications Equipment ReportingThe contract requires suppliers to disclose and report all covered defense telecommunications equipment or services provided under the subcontract, including detailed supplier information such as the Unique Entity Identifier and Commercial and Government Entity code, along with their specific role in the supply chain and the intended use of the equipment or services if applicable. This reporting obligation applies to any component tied to the contract and must be completed accurately to ensure compliance with defense telecommunications security requirements. The solicitation is categorized under NAICS code 334220, which pertains to telecommunications equipment manufacturing, and is managed by the Department of Defense through the Land Supplier Operations Vehicle Support office. Submissions are due by August 17, 2026, with the request published on August 5, 2026, and performance is expected to be centered in San Diego, California, with a specific ZIP code of 92145-2049. Although the solicitation number is not provided in the data, the contract can be accessed through the DIBBS procurement portal using the provided UI link. This is a subcontract opportunity with no set-aside designation, meaning it is open to all eligible entities regardless of business size or status, and response must include comprehensive details to meet federal reporting standards for secure telecommunications infrastructure.
Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541620
New
DIBBS
Hazardous Material Compliance & Labeling ServicesThe contract entails the preparation of hazard warning labels and Safety Data Sheets for hazardous materials utilized in manufacturing and packaging operations, with strict adherence to OSHA, GHS, and other applicable federal regulatory standards. The work involves accurately classifying chemical hazards, developing compliant labeling systems, and ensuring all documentation meets current federal requirements for communication of chemical risks to workers and downstream users. This is a subcontract under the NAICS code 541620, awarded by the Department of Defense through its LAND SUPPLIER OPNS VEHICLE SPT office, with performance required in San Diego, California, specifically at the zip code 92145-2049. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026. The procurement aims to secure specialized compliance services to support defense-related supply chain safety and regulatory obligations, with no setaside designation specified.
Environmental Consulting Services

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
Manufacturing of Vehicular Bracket (NSN: 2510017070135)The contract requires the fabrication, machining, and assembly of a military-spec vehicular bracket designated by NSN 2510017070135, with full responsibility for material sourcing, quality control, and final packaging in accordance with federal standards. All work must comply with MIL-STD-129 labeling requirements to ensure proper identification and traceability throughout the defense logistics chain. The project is classified as a subcontract under NAICS code 332999 and is managed by the Department of Defense through the LAND SUPPLIER OPNS VEHICLE SPT office, with performance required at a facility in San Diego, California, zip code 92145-2049. The solicitation is open for responses from August 5, 2026, with a firm deadline for submissions on August 17, 2026, and all deliverables must meet rigorous military specifications for durability, precision, and documentation integrity.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541611
New
DIBBS
Small Business and Socioeconomic Status RepresentationThe contract seeks a subcontractor to provide support to a prime contractor in accurately representing small business and socioeconomic status designations such as 8(a), WOSB, SDVOSB, and HUBZone within the System for Award Management (SAM) and in proposal submissions, including the proper disclosure of joint venture arrangements. This support is critical to ensure compliance with federal procurement regulations and to maintain the integrity of small business set-asides by preventing misrepresentation or incomplete documentation. The work will involve verifying eligibility, preparing and formatting required disclosures, and maintaining up-to-date records consistent with SBA and federal guidelines. The contract is classified under NAICS code 541611 for management consulting services and is tied to the Department of Defense’s Land Supplier Operations Vehicle Support office, with the place of performance located at Fort Huachuca, Arizona, zip code 85613-6000. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026. While no specific set-aside type is designated, the nature of the work is inherently linked to small business representation, making it essential that all supporting activities align with federal small business intent. The subcontractor must demonstrate expertise in navigating SAM, proposal compliance, and joint venture structures to ensure the prime contractor’s status claims remain defensible and authorized.
Administrative Management and General Management Consulting Services

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541512
New
DIBBS
WAWF Invoicing and Receiving Report SubmissionAll subcontractors must submit invoices and receiving reports exclusively through the Wide Area Workflow system in full compliance with Federal Acquisition Regulation 52.213-1 and Defense Federal Acquisition Regulation Supplement Appendix F. This requirement ensures standardized, secure, and audit-ready documentation for all financial and logistical transactions under this contract. The contract is tied to performance at Fort Huachuca, Arizona, with the North American Industry Classification System code 541512 indicating information technology services, and falls under the Department of Defense’s Land Supplier Operations Vehicle Support agency. Submissions must be completed by the deadline of August 17, 2026, and failure to adhere to WAWF protocols may result in payment delays or contract noncompliance. The solicitation is open for response until August 17, 2026, and all parties must follow the electronic submission process outlined by the DLA Web Portal.
Computer Systems Design Services

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 493190
New
DIBBS
Packaging and Labeling ServicesThe contract requires the packaging and labeling of vehicle doors and hatches in strict compliance with DLA RP001 standards, ensuring all components are properly prepared for transport and storage. This includes the handling of hazardous materials, which demands adherence to relevant safety protocols and accurate documentation throughout the process. The work must be performed at the specified place of performance in Fort Huachuca, Arizona, with all activities aligned to federal supply chain requirements and regulatory guidelines for defense logistics. This is a subcontract opportunity under NAICS code 493190, issued by the Department of Defense through the Land Supplier Operations Vehicle Support organization. The solicitation was posted on August 5, 2026, with a response deadline of August 17, 2026. All interested parties must submit proposals by the stated deadline to be considered, and performance is expected to meet the high standards required for military-grade logistics, including precise labeling, material classification, and traceable documentation for hazardous contents. The full details and submission process are accessible via the provided DIBBS link.
Other Warehousing and Storage

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details