Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

This Combined Synopsis/Solicitation opportunity from Department Of Defense was posted on June 1, 2021. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Baghouse Repairs at The Naval Foundry and Propeller Center- Philadelphia

Closed
N6449820Q0191Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811310
New
SLED
Bus Fire Suppression System Maintenance
Solicitation # WMATA-0000010906
The Washington Metropolitan Area Transit Authority is seeking proposals for the maintenance of bus fire suppression systems under solicitation number WMATA-0000010906. This procurement falls under NAICS code 811310 and is managed through the agency's Virginia operations. The solicitation was posted on October 29, 2026, and requires all responses to be submitted by the deadline of November 4, 2026. Interested parties can access further details and submission portals through the official WMATA supplier link.
Washington Metropolitan Area Transit Authority

POSTED

about 3 hours ago

DEADLINE

in 6 days
NAICS: 811310
New
Kubota M8200 Clutch Replacement
Solicitation # kubota-m8200-clutch-replacement
Management and Training Corporation is soliciting lump sum fee proposals for the clutch replacement of a Kubota M8200 tractor with front wheel assist, located at the Earle C. Clements Job Corps Center in Morganfield, Kentucky. The scope of work requires a qualified contractor to provide all transportation, labor, materials, and equipment to diagnose and repair the clutch assembly and power take-off system. Key technical requirements include replacing friction discs, bearings, oil seals, and O-rings, resurfacing the flywheel, and replacing hydraulic pipes and filters as needed. The contractor must perform all work according to manufacturer specifications and provide a final summary of diagnostic findings, an itemized list of replaced parts, and warranty documentation upon completion. This solicitation is set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certified entities. Bids must be submitted via email to Angie Mahoney by 3:00 PM CST on November 3, 2026, and must include a bid sheet, proof of insurance, a completed supplier packet with a W-9, and applicable SBA certification letters. Award decisions will be based on best value, with a focus on administrative compliance and technical qualifications. The contract is subject to various Federal Acquisition Regulations, including standards for combating trafficking in persons, Buy American restrictions, and Service Contract Labor Standards per Wage Determination 2015-4687 Revision 31 for Kentucky.
Earle C. Clements Job Corps Center

POSTED

about 3 hours ago

DEADLINE

in 5 days
NAICS: 811310
New
SLED
Wheelchair Lift and Accessibility Equipment
Clayton County Board of Education

POSTED

about 5 hours ago

DEADLINE

in about 1 month
NAICS: 811310
New
SLED
Extended Warranty Package Provision
Philadelphia Gas Works

POSTED

about 7 hours ago

DEADLINE

in 22 days
NAICS: 811310
New
International
Chlorine Evaporator Maintenance and Inspection ServicesThis subcontract opportunity with the Ontario Clean Water Agency involves providing annual maintenance and detailed technical inspections of chlorine evaporators and related chlorinator services. The selected supplier will be responsible for utilizing specialized equipment to service evaporator units and must possess qualified status for the handling of hazardous materials. All work must culminate in the delivery of comprehensive annual maintenance and inspection reports. The project is based in Canada and falls under NAICS code 811310. Interested parties must submit their responses by the deadline of November 27, 2026. This contract is designed for suppliers capable of supporting prime contractors on OCWA projects through specialized technical expertise in chlorination systems.
Ontario Clean Water Agency

POSTED

about 8 hours ago

DEADLINE

in 29 days
NAICS: 811310
New
SLED
Air Compressor Preventive and Corrective Maintenance
City of Roseville

POSTED

about 9 hours ago

DEADLINE

in about 2 months
NAICS: 811310
New
SLED
RFP 07-135 Roseville Electric Utility – Air Compressor Maintenance
Solicitation # 07-135
The City of Roseville is soliciting proposals under RFP 07-135 for a consultant to provide comprehensive scheduled preventive and corrective maintenance for air compressors and auxiliary systems, including Ingersoll Rand equipment. The services will be performed at the Roseville Energy Park and Sunset Energy Center in California. The selected consultant will be responsible for providing all necessary labor, technical expertise, specialized tooling, and materials. This is a prevailing wage project with an initial contract duration of five years, estimated to commence in April or May. Proposals must be submitted by December 16, 2026, via email to the City Clerk or through physical delivery in a sealed container with the required Attachment H label. The award will be based on a formal evaluation panel process considering the firm's experience and qualifications (25 points), the proposed project plan (35 points), and cost (40 points), with potential interviews for top candidates. Requirements for the successful bidder include obtaining a City of Roseville business license, providing 100% faithful performance and labor and materials bonds, and maintaining specific insurance policies. Consultants must also disclose any conflicts of interest and adhere to the Levine Act regarding political contributions.
City of Roseville

POSTED

about 9 hours ago

DEADLINE

in about 2 months
NAICS: 811310
New
SLED
Specialized Heat Exchanger Maintenance (Preventive & Corrective)
City of Roseville

POSTED

about 9 hours ago

DEADLINE

in about 2 months
NAICS: 811310
New
SLED
Compressor Auxiliary Systems Maintenance
City of Roseville

POSTED

about 9 hours ago

DEADLINE

in about 2 months
NAICS: 811310
New
SLED
Gas Packager Compressor Maintenance Services
City of Roseville

POSTED

about 9 hours ago

DEADLINE

in about 2 months
NAICS: 811310
New
SLED
Ariel Gas Compressor Maintenance Services
City of Roseville

POSTED

about 9 hours ago

DEADLINE

in about 2 months
NAICS: 811310
New
SLED
Roseville Electric Utility – Gas Compressor Maintenance
Solicitation # 07-137
The City of Roseville is soliciting proposals for Gas Compressor Maintenance Services to support the Roseville Energy Park and the Roseville Energy Center and RPEAK. The selected contractor will provide all labor, supervision, technical expertise, specialized tooling, equipment, and materials necessary for both scheduled preventive and corrective maintenance on natural gas compressors, specifically Gas Packagers and Ariel models, and their associated auxiliary systems. The contract is intended to run for an initial term of five years, with services estimated to commence in April or May. This is a prevailing wage project requiring adherence to all fair employment laws, with certified payroll required for contracts exceeding 25,000 dollars. The successful proposer must provide a 100 percent Faithful Performance Bond and a 100 percent Labor and Materials Bond. Proposals are due by December 17, 2026, and must include a Proposer’s Certification, a Non-collusion Declaration, a Levine Act Disclosure Statement, and proof of active registration with the California Secretary of State. Award will be made to the responsible proposer determined to be the most advantageous to the City through a formal evaluation panel process. Invoicing is to be submitted monthly, delineated by task and personnel, with payment terms set at 30 days following receipt of satisfactory services.
City of Roseville

POSTED

about 9 hours ago

DEADLINE

in about 2 months

General Info

Agency

Department Of Defense → Nswc Philadelphia Division

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

Place of Performance

Philadelphia, PA, 19112, USA

Set-Aside

SBA

Documents

5

Baghouse+Repairs+-+CDRL+A001+-+Comprehensive+Service+Report.pdf

PDF

N6449820Q0191+Amendment+0002.pdf

PDF

Request+for+Quote+%28RFQ%29+N6449820Q0191+Amendment+0003.pdf

PDF

RFQ+N6449820Q0191+Amendment+0001.pdf

PDF

RFQ+N6449820Q0191.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

6 updates
PhaseClosed
Posted

Combined Synopsis

Deadline changed

Response deadline changed from Sep 2, 2020 to Jan 5, 2021.

Notice updated

The notice description changed.

Deadline changed

Response deadline changed from Jan 5, 2021 to Apr 5, 2021.

Notice updated

Response deadline changed from Apr 5, 2021 to Apr 2, 2021. The notice description changed.

Notice updated

Response deadline changed from Apr 2, 2021 to Apr 7, 2021. The notice description changed.

Response Deadline

Deadline has passed

Notice updated

Notice details unchanged. Attachments may have changed.

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Nswc Philadelphia Division
Contacts1 person available
OfficePHILADELPHIA, PA, 19112-1403, USA
Organization / AgencyDepartment Of Defense → Nswc Philadelphia Division
Office AddressPHILADELPHIA, PA, 19112-1403, USA
Contacts
Megan A. Lamiotte
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
UPDATE (24 March 2021): Based on the Site Visit questions submitted, please see attached Amendment 0003. UPDATE (24 February 2021): Based on the Site Visit, please see attacehed Amendment 0002. UPDATE (17 December 2020): A Site Visit is being held at the NFPC located in Philadelphia, Pennsylvania. For all information, please see the attached Amendment (RFQ N6449820Q0191 0001). This service requirement consists of the contractor performing corrective maintenance to all baghouses. The baghouses are: BH-1, BH-2A, BH-2B, BH-2C, BH-3, BH-5, and BH-7. BH-5 and BH-7 are formerly BH-8 and BH-10. All baghouses are located in the Naval Foundry and Propeller Center in Philadelphia, PA. PLEASE NOTE: For additional information please see attached RFQ N6449820Q0191. At this time, no Site Visits will be granted for this requirement, however, pictures are availabe upon request. To request pictures please email Megan Lamiotte: contact@example.gov

More opportunities from Department Of Defense → Nswc Philadelphia Division

Same awarding agency

NAICS: 331110
New
Federal
ERCuNiAl TIG Welding Wire SupplierThis small business set-aside subcontract through the Department of Defense and the NSWC Philadelphia Division involves the supply of ERCuNiAl TIG welding wires for prime contractors working on NAVSEA Naval Foundry and Propeller Center projects. The supplier is responsible for manufacturing and sourcing copper-nickel-aluminum alloy wire in 3/32 inch by 36 inch and 1/8 inch by 36 inch sizes, ensuring strict adherence to MIL-E-23765/3A specifications. The scope of work requires the delivery of 80 containers of MIL-SPEC welding wire along with comprehensive technical compliance documentation. Deliverables include Level C packaging and a full Certification Package as mandated by CDRL/DD Form 1423. The contract falls under NAICS code 331110 and is to be performed in the 19112 zip code area.
Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 8 days
View Details
NAICS: 333992
New
Federal
ERCuNiAl TIG Wire
Solicitation # N6449827Q0003
Solicitation N6449827Q0003 is a total small business set-aside for the Naval Surface Warfare Center Philadelphia Division to provide ERCuNiAl TIG wires to the Naval Foundry and Propeller Center. This firm-fixed price contract requires the delivery of 40 containers of 3/32 inch by 36 inch wire and 40 containers of 1/8 inch by 36 inch wire, both meeting MIL-E-23765/3A specifications with a length tolerance of 36 inches plus 0 to 1/2 inch. All items must be delivered to the destination in Philadelphia, Pennsylvania, on or before November 30, 2026. The contractor must adhere to Level C packaging standards and provide a certification package for each lot of wire per MIL-E-23765B, including chemical, mechanical, and non-destructive testing results. Award will be made to a single offeror based on technical acceptability and the ability to furnish all units of all items. Compliance requirements include SAM registration, CMMC cybersecurity standards, and adherence to the Buy American-Free Trade Agreements-Israeli Trade Act. Invoicing is to be processed electronically via Wide Area WorkFlow. Access to the facility for delivery requires five working days notice, valid vehicle registration and insurance, and two forms of government-issued identification.
Welding and Soldering Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 8 days
View Details
NAICS: 541330
New
Federal
Amphibious/CVN Engineering and Ship Control Systems
Solicitation # N6449827R3103
Engineering Services

POSTED

about 13 hours ago

DEADLINE

in 14 days
View Details
NAICS: 541330
New
Federal
Programmable Logic Controller (PLC) Parts
Solicitation # 26-SIMACQ-PD-51-0189
Engineering Services

POSTED

about 13 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334513
New
Federal
512_LCS DAU Panels IDIQ_FY27
Solicitation # N6449826R0542
Solicitation N6449826R0542 is a Firm Fixed Price Indefinite Delivery/Indefinite Quantity (IDIQ) contract issued by the Naval Surface Warfare Center Philadelphia Division for the production of Data Acquisition Units (DAU) supporting the LCS Independence Advanced Engineering Control System. The contract features a five-year ordering period with an estimated total value of 50 million dollars and a minimum order of 500 dollars. The scope includes the production and delivery of shipboard DAUs, requiring strict adherence to military standards for shock tests, mechanical vibrations, electromagnetic interference, and environmental engineering. Award selection is based on a subjective tradeoff process prioritizing technical capabilities, past performance, and total evaluated price, with a mandatory acceptable rating for small business participation. Contractors must implement a comprehensive quality management system adhering to ISO 9001:2015 and provide numerous deliverables, including acceptance test plans, reports, certificates of compliance, and technical data packages. Rigorous packaging and marking requirements are mandated per ASTM-D-3951-18 and MIL-STD-2073-1 to ensure equipment protection during transit to the Philadelphia destination. Administrative requirements include electronic invoicing via Wide Area Workflow and mandatory security training for personnel. The solicitation has undergone amendments to extend the response deadline to November 13, 2026, and requires proposals to be submitted in five specific volumes via the PIEE Solicitation Module and SAM.gov.
Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 13 hours ago

DEADLINE

in 15 days
View Details
NAICS: 335999
New
Federal
Electrical Enclosure & Control System FabricationThis subcontract for Electrical Enclosure and Control System Fabrication supports the Naval Surface Warfare Center, Philadelphia Division. The scope of work involves the manufacture of specialized electrical enclosures and control valve assemblies for prime contractors, specifically fabricating MKIII REE, SEE, Mini-AU, AU, and various cooling, cleaning, and pulper control valves according to NAVSEA specifications. Performance of the contract takes place in Philadelphia. To ensure quality and security, the contractor must maintain ISO 9001:2015 certification and comply with NIST SP-800-171 and DFARS 252.246-7007 standards for supply chain traceability. The project falls under NAICS code 335999 and requires the final delivery of completed enclosures and valve assemblies.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 333999
New
Federal
Solid Waste Shredder FabricationThis subcontract for Solid Waste Shredder Fabrication involves the production and testing of Mod I Metal and Glass Shredders as well as Mod I Plastics Waste Shredders. Working for prime contractors on projects for the Naval Surface Warfare Center, Philadelphia Division, the selected provider must manufacture units according to NAVSEA drawings of record for Top Level Assembly and Interface. The final deliverable consists of fully completed and tested shredder units. The project is managed under the Department of Defense and requires strict adherence to ISO 9001:2015 and NIST SP-800-171 compliance standards. Performance will take place in Philadelphia, Pennsylvania. Interested parties should note the response deadline of November 12, 2026, for this effort categorized under NAICS code 333999.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 333999
New
Federal
Pulper System Fabrication (Large & Small)This subcontract involves the fabrication and testing of Mod I Large and Small Pulper systems for prime contractors supporting the Naval Surface Warfare Center, Philadelphia Division. The selected provider is responsible for manufacturing these systems in strict accordance with NAVSEA drawings and conducting all necessary testing based on specified interface drawings to ensure full operational functionality before delivery. The project is managed under the Department of Defense and requires the contractor to maintain ISO 9001:2015 and NIST SP-800-171 compliance. Performance will take place in Philadelphia, with the primary objective being the delivery of completed and verified Pulper systems that meet all technical and security standards.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 333999
New
Federal
Plastics Waste Processing Equipment (PWP) FabricationThis subcontract involves the fabrication, production, and testing of Mod I and Mod II Plastics Waste Processors and Mod I CMU Assemblies for the Naval Surface Warfare Center, Philadelphia Division. The selected contractor is responsible for manufacturing equipment according to NAVSEA drawings of record and conducting rigorous testing as specified in the statement of work attachments to ensure the delivery of fully completed and tested units. Performance of this contract requires strict adherence to quality and security standards, including ISO 9001:2015, NIST SP-800-171, and DFARS 252.246-7007 compliance. The work will be performed in Philadelphia, Pennsylvania, under NAICS code 333999, supporting Department of Defense initiatives.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 238210
New
Federal
Marine Electrical Installation & IntegrationThe Marine Electrical Installation and Integration subcontract involves the installation and integration of electronic and electrical systems for prime contractors supporting the Naval Surface Warfare Center Philadelphia Division. The scope of work covers both shipboard and shore-based platforms, with specific requirements for system integration, installation support, bonding and grounding verification, and the delivery of insulation resistance reporting. To execute this contract, the provider must utilize specialized electrical testing equipment and bonding and grounding tools. Personnel are required to hold Secret security clearances, OSHA 10-hour Maritime Shipyard certifications, and Electrical WAF/tag-out training. The final deliverables consist of fully certified systems and comprehensive insulation resistance reports.
Electrical Contractors and Other Wiring Installation Contractors

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 423510
New
Federal
Specialized Marine Material Supply (Level I)This subcontract for Specialized Marine Material Supply (Level I) involves the procurement and delivery of high-criticality Level I materials, components, and raw stock, including aluminum, steel, and piping, for prime contractors working on Naval Surface Warfare Center Philadelphia Division vessels. The contractor is responsible for ensuring all supplied materials meet strict NAVSEA Level I quality standards and are delivered with full traceability and comprehensive inspection records. Key compliance requirements for this contract include the implementation of a NAVSEA Level I compliant program, the provision of Dimensional Inspection Records, and Mercury Free Certification. Operating under NAICS code 423510, the provider must guarantee that all materials are certified and meet the rigorous technical specifications required by the Department of Defense.
Metal Service Centers and Other Metal Merchant Wholesalers

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 541330
New
Federal
Marine CAD Design & Engineering ServicesThe Marine CAD Design and Engineering Services subcontract supports prime contractors on shipboard modifications for the Naval Surface Warfare Center Philadelphia Division. The scope of work includes design development, prototype engineering, technology insertion planning, and the creation of technical documentation and Integrated Logistics Support materials using marine-grade CAD software. To ensure compliance and security, the contractor must maintain ISO-9001 Quality Systems and hold a Secret clearance for handling classified designs. Key deliverables for this effort consist of technical drawings, prototype designs, and comprehensive ILS documentation under NAICS code 541330.
Engineering Services

POSTED

1 day ago

DEADLINE

N/A
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 811310
Closed
Federal
Upgrade and Align Betts Lathe
Solicitation # N3904021Q0039
Portsmouth Naval Shipyard Gf

POSTED

over 5 years ago

CLOSED

over 5 years ago
View Details
NAICS: 811310
Awarded
Federal
43--PUMP UNIT,CENTRIFUG, IN REPAIR/MODIFICATION OF
Solicitation # N0010421QCZ84
Navsup Weapon Systems Support Mech

POSTED

over 5 years ago

CLOSED

over 5 years ago
View Details
NAICS: 811310
Awarded
Federal
Flight Line Fire Extinguisher Maintenance
Solicitation # FA480021Q0024
FA4800 633 Cons Pkp

POSTED

over 5 years ago

CLOSED

over 5 years ago
View Details
NAICS: 811310
Awarded
Federal
J059--SPECIAL Generator Repair - Fargo (VA-21-00056503)
Solicitation # 36C26321Q0580
Network Contract Office 23 (36C263)

POSTED

over 5 years ago

CLOSED

over 5 years ago
View Details
NAICS: 811310
Closed
Federal
Electrical Engineering Technician, Weight Handling Equipment (WHE)
Solicitation # N4215821QN010
Norfolk Naval Shipyard Gf

POSTED

over 5 years ago

CLOSED

over 5 years ago
View Details
NAICS: 811310
Awarded
Federal
J045--Heat Exchange Units Cleaning Services
Solicitation # 36C24121Q0471
241-NETWORK Contract Office 01 (36C241)

POSTED

over 5 years ago

CLOSED

over 5 years ago
View Details
NAICS: 811310
Awarded
Federal
H--BDO Removing, Transporting, and Reinstalling four
Solicitation # 140R2021Q0050
Mp-Regional Office

POSTED

over 5 years ago

CLOSED

over 5 years ago
View Details
NAICS: 811310
Awarded
Federal
Compressor Maintenance
Solicitation # N0042121Q0374
Naval Air Warfare Center Air Division

POSTED

over 5 years ago

CLOSED

over 5 years ago
View Details
NAICS: 811310
Federal
Inspection, Repair, Testing, and Storage of 3 Gensets
Solicitation # N4657921RC02162
Navsup Flc Norfolk

POSTED

over 5 years ago

DEADLINE

N/A
View Details
NAICS: 811310
Closed
Federal
Control Upgrades 20015
Solicitation # FA860121C0029
FA8601 Aflcmc Pzio

POSTED

over 5 years ago

CLOSED

over 5 years ago
View Details
NAICS: 811310
Closed
Federal
Control Upgrades 20014
Solicitation # FA8601-21-P-0064
FA8601 Aflcmc Pzio

POSTED

over 5 years ago

CLOSED

over 5 years ago
View Details
NAICS: 811310
Awarded
Federal
Combine Maintenance
Solicitation # 12505B21S1037230
USDA Ars Mwa Aao Acq/per Prop

POSTED

over 5 years ago

CLOSED

over 5 years ago
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS