Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

BATTERY POWER SUPPLY

Active
SPE7L7-26-T-4660Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the supply of 10 units of a battery power supply with part number TI2000GPU-24 and NSN 6130-01-445-9539, under solicitation SPE7L7-26-T-4660, issued by the Defense Logistics Agency for the Department of Defense. Delivery is required within 20 days to the USCG Aviation Logistics Center in Elizabeth City, NC, with FOB destination terms and zero variance allowed in quantity. The item is classified as a commercial off-the-shelf product with a Type II shelf life of 12 months, extendable, and must comply with MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements, including special marking code 33 for shelf life. Packaging must adhere to DLA’s procurement guidelines and include appropriate hazardous material controls as outlined in IP025. The item must not contain intentional mercury or mercury-containing compounds except where functionally necessary, such as in batteries, and any mercury-containing portable devices must include a secondary containment barrier as specified by NAVSEA. The supplier must comply with CMMC Level 2 cybersecurity self-assessment requirements and handle covered defense information per RD002. All hazardous materials must be accompanied by Safety Data Sheets (SDS) and labels conforming to OSHA’s Hazard Communication Standard 29 C.F.R. 1910.1200, and employees must be trained on these requirements. Sampling and inspection are governed by MIL-STD-1916 or equivalent zero-based plans, with acceptance standards of zero non-conformances unless otherwise stated. The contract requires full compliance with DLA’s master list of technical and quality requirements, and the item is subject to verification against critical, major, and minor attributes with assigned verification levels or AQLs. Shipping must use the fastest traceable means, explicitly prohibiting parcel post, and must follow the provided freight and parcel addresses. The solicitation is a total small business set-aside under NAICS code 334416, with responses due by August 20, 2026, and the original delivery date set for July 23, 2026.

General Info

Supply 10 TI2000GPU-24 batteries to USCG Elizabeth City in 20 days, CMMC Level 2, DLA standards, zero variance, no mercury except in batteries.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

334416 - Capacitor, Resistor, Coil, Transformer, and Other Inductor ManufacturingView NAICS

Place of Performance

1664 WEEKSVILLE ROAD, BLDG 63, ELIZABETH CITY, NC, 27909-5001, US

Set-Aside

SBA

Documents

(1)

RFQ SPE7L7-26-T-4660 for DLA Land and Maritime

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Defense Logistics Agency
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → Defense Logistics Agency
View Agency Profile
Office AddressUS
Contacts
KURT BECKA
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BATTERY POWER SUPPLY
BATTERY POWER SUPPLY
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment
RD002, COVERED DEFENSE INFORMATION APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
Hazard Communication Standard Notice:
Effective June 1, 2015, Federal Standard No. 313-E, Material Safety Data, Transportation Data and Disposal Data for Hazardous Materials Furnished to Government Activities, establishes the requirement for preparation and submission of Safety Data Sheets (SDS) in lieu of Material Safety Data Sheets (MSDS) by suppliers who provide hazardous materials to government activities.
The Occupational Safety and Health Administration (OSHA) has modified its Hazard Communication Standard (HCS) to conform to the United Nations Globally Harmonized System of Classification and Labeling of Chemicals. As a result of this change, GSA revised Federal Standard No. 313-E requiring Safety Data Sheets for classifying chemicals and communicating the applicable information on labels.
In accordance with the revised standard after June 1, 2015:
SPE7L7-26-T-4660
SECTION B
1. Suppliers will be required to submit, to the contracting officer for review and approval prior to award, safety data sheets consistent with the requirements found at 29 C.F.R. 1910.1200 for hazardous materials delivered to the Government.
2. Suppliers will also be required to submit, to the contracting officer for review and approval prior to award, Hazardous Communication Standard (HCS) labels in accordance with 29 C.F.R. 1910.1200 requirements or current Consumer Product Safety Act (CPSA), Federal Hazardous Substance Act (FHSA) labels when subject to labeling requirements under those statutes. This product labeling is required for hazardous materials delivered to the Government.
3. Finally, suppliers must train their employees on the new safety data sheets, hazardous communication labels, and requirements of 29 C.F.R. 1910.1200.
For more information on SDS, refer to OSHAs website, available at:
https://www.osha.gov/law-regs.html
For information on 29 C.F.R. 1910.1200, refer to the below link:
https://www.osha.gov/dsg/hazcom/index.html SHELF LIFE TYPE II, 12 MONTHS
COMMERCIAL OFF THE SHELF ITEM. ADEQUATE CATALOG
DATA IS AVAILABLE AT THE PROCUREMENT AGENCY TO
EVALUATE ALTERNATE OFFERS.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
RS055: Shelf life requirement RS001 for a TYPE 2 (CODE 4) item with a shelf life of 12 month (extendable) applies to this item.
TESLA INDUSTRIES INC 0VWE2 P/N TI2000GPU-24
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017562157 0001 EA 10.000
NSN/MATERIAL:6130014459539
DELIVERY (IN DAYS):0020
SPE7L7-26-T-4660
SECTION B
PR: 7017562157 PRLI: 0001 CONT’D
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:HM CLNG/DRY:Z PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:33 -33 Type II, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PARCEL POST ADDRESS:
Z50100
COMMANDING OFFICER
USCG AVIATION LOGISTICS CENTER
1664 WEEKSVILLE ROAD, BLDG 63
ELIZABETH CITY NC 27909-5001
US
SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
Z50100
COMMANDING OFFICER
USCG AVIATION LOGISTICS CENTER
1664 WEEKSVILLE RD BLDG 63
ELIZABETH CITY NC 27909-5001
US
M/F: (TCN) Z5010062015011
RDD: 213
PROJ: GSE TP 2
SUPP ADD: SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 05
DIC: A0A DIST: ADV: 2A FC: QG
Need Ship Date:00/00/0000 Original Required Delivery Date:07/23/2026
SPE7L7-26-T-4660 NSN/Part Number: 6130-01-445-9539 Quantity: 10 EA Purchase Request: 7017562157QTY: 10 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334416
New
DIBBS
RESISTOR, THERMAL
Solicitation # SPE7M5-26-T-398D
The contract is for the procurement of two thermal resistors with NSN 5905-01-167-8648, designated as a critical application item, sourced exclusively from approved manufacturers LAVI SYSTEMS, INC. and EDEL ENGINEERING DEVELOPMENT CO. with specific part numbers S246-B52 and 10-30758-7 respectively. The contract imposes stringent quality and compliance requirements including adherence to MIL-STD-1916 or equivalent zero-based sampling plans with strict acceptance criteria—zero non-conformances required unless otherwise stated—and mandates assignment of verification levels VII, IV, and II for critical, major, and minor attributes. Configuration control requires formal engineering change proposals for any deviations, and all unapproved sources must receive ESA approval prior to submission. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with special attention to lead finish identification per IPC/JEDEC J-STD-609, requiring each unit package to be labeled according to specified paragraphs for Pb and Pb-free status. The items must be delivered FOB origin within 165 days to Tinker AFB, Oklahoma, with no variance allowed in quantity—exactly two units must be supplied. Inspection and acceptance occur at destination, and transportation logistics follow DLA procedural notes C19 and C20. All documentation must meet Source Approval Request standards, and removal of government identifiers from non-accepted supplies is prohibited. The contract is issued under SPE7M5-26-T-398D with a unit price of $2.00 per unit and a total value of $4.00, with a bid deadline of August 20, 2026.
ACTIVE DEVICES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334416
New
DIBBS
CAPACITOR, FIXED, ELE
Solicitation # SPE7M5-26-T-399M
The contract pertains to the procurement of a single fixed electrical capacitor, identified by NSN 5910-01-451-8713 and part number CWR06KB155KC, compliant with MIL-PRF-55365K and MIL-PRF-55365/4L specifications. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with compliance tied to the revision in effect on the solicitation or award date. The item must conform to qualification standards listed on Qualified Products Lists or Qualified Manufacturers Lists, and physical identification and marking must adhere to RQ017 and MIL-STD-129. Lead finish markings must follow IPC/JEDEC J-STD-609, applied to each unit pack with placement consistent with the standard’s technical guidelines. Packaging and preservation must comply with MIL-DTL-39028 for capacitors, and all packaging, labeling, and shipping must meet MIL-STD-2073-1E. Delivery is FOB origin, with inspection and acceptance occurring at destination, and no quantity variance is permitted. The delivery deadline is 20 days from contract award, with a required delivery date of August 10, 2026. The destination is Fort Riley, Kansas, for the U.S. Army, and transportation and shipment details are governed by DLAD Procurement Notes C19 and C20. Special marking codes and government use identifiers are included for logistics and tracking purposes.
ACTIVE DEVICES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, FIXED, FILM
Solicitation # SPE7M5-26-T-397V
This contract specifies the procurement of a fixed film resistor identified by NSN 5905002535193 and part number RNC50H6652FS, meeting MIL-PRF-55182/1R Revision R dated 08/15/2024, with a required quantity of 2,381 units delivered FOB origin within 165 days. All components must comply with DLA packaging requirements and be marked in accordance with MIL-STD-129, including special marking code ZZ for unique requirements. The resistor must be protected from electrostatic discharge and electromagnetic interference using qualified packaging materials per MIL-PRF-81705, specifically Type I and Type III barrier materials sourced only from manufacturers listed on QPL-81705, with ESD and physical protection applied to all leads and terminals. Lead finish labeling must conform to IPC/JEDEC J-STD-609, and the item is designated as a critical application component undergoing full and open competition. The use of ozone-depleting substances is strictly prohibited in all manufacturing and processing stages unless approved in writing by the contracting officer, and mercury or mercury compounds are forbidden except in specific exempted applications such as batteries or specified instruments, with portable devices containing mercury requiring shockproof construction and secondary containment. Preservation and packaging must exclude mercury entirely under IP056, and all packaging must adhere to MIL-STD-2073-1E with preservation method GX and unit package codes as defined. Deliveries must be palletized to DLA standards and sent to the designated DLA distribution facility in New Cumberland, PA, with no variance allowed in quantity. The contract enforces strict compliance with technical and quality requirements referenced through the DLA Master List, and any proposed packaging solutions must be documented if the solicitation does not explicitly require ESD/EMI protection for items susceptible to environmental degradation.
ACTIVE DEVICES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334416
New
DIBBS
CAPACITOR, FIXED, CER
Solicitation # SPE7M0-26-T-034P
This contract specifies the procurement of a fixed ceramic capacitor identified by NSN 5910-01-182-2217, with a quantity of one unit, under purchase request 7017784015. The item is classified as a commercial item, including commercial of a type, and must comply with DLA packaging requirements and technical quality standards referenced in the DLA Master List of Technical and Quality Requirements, with applicable revision controls based on the solicitation or award date as determined by acquisition type. Physical identification and marking of the item are required, and government identification must be removed from any non-accepted supplies. Delivery is mandated within five days of award, with performance taking place at Robins AFB, GA, 31098-1626. The solicitation, issued by the Department of Defense through the Maritime Supply Chain ESOC Buys office, has a response deadline of August 20, 2026, and is solicited under SPE7M0-26-T-034P, with primary point of contact Audrey Acuna available via email and phone for inquiries.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334416
New
DIBBS
SEAL, NONMETALLIC CHANN
Solicitation # SPE7L3-26-T-168Z
The contract pertains to a nonmetallic channel seal designated by part number AT214162 and national stock number 5330014737861, with a single unit to be delivered within five days of order placement. The item must be packaged in accordance with MIL-DTL-117, Type II, Class C, Style 1, requiring a medium-duty, waterproof, greaseproof, and opaque bag to protect against ultraviolet degradation. Packaging and marking must comply fully with MIL-STD-2073-1E and MIL-STD-129, with no special marking required. All shipments are to be delivered FOB origin, inspected at destination, and shipped via traceable means—parcel post is prohibited. The delivery address is Fort McCoy, Wisconsin, with specific handling instructions for RDD shipment and hazardous materials compliance per IP025. The contract references DoD packaging and quality standards from the DLA Master List, and the revision in effect on the solicitation issue date governs requirements. The unit of issue is each, with no quantity variance allowed, and the purchase request number is 7017768611. The original required delivery date is August 10, 2026, with the solicitation issued under SPE7L3-26-T-168Z. The supplier is John Deere Construction & Forestry Co, and the contract is managed by the Department of Defense’s Land Supplier Operations Vehicle Support.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334416
New
DIBBS
CAPACITOR, FIXED, CER
Solicitation # SPE7M1-26-T-269K
This contract outlines the procurement of a fixed ceramic capacitor, part number CCR06CG472GS, manufactured in compliance with MIL-PRF-20/36H and MIL-PRF-20N Supplement 1, both effective as of specified revision dates. The item is classified as a commercial item under FAR 11.001 and is subject to strict quality control, requiring procurement exclusively from qualified sources listed on the Qualified Product Database (QPD) in accordance with MIL-PRF-20. Commercial substitutes are prohibited without prior written government approval. The capacitor must meet all technical and quality requirements referenced through the DLA Master List of Technical and Quality Requirements, and the use of ozone-depleting substances is explicitly forbidden unless granted written authorization by the Contracting Officer. Mercury and mercury-containing compounds are prohibited in its construction or direct contact, with limited exceptions for specific functional uses such as batteries, fluorescent lighting, and naval instruments, all subject to additional containment requirements. The item must be packaged and marked in strict accordance with MIL-STD-2073-1E and MIL-STD-129, including special packaging and preservation methods as defined by MIL-DTL-39028 for capacitors. Each individual unit pack must bear lead-free or lead-containing attribute markings as per IPC/JEDEC J-STD-609, with placement and documentation requirements fully specified. The delivery is FOB origin, with a total quantity of 1,281 units to be delivered within 74 days, subject to zero quantity variance. Inspection and acceptance occur at the destination, and the shipping address is designated as DLA Distribution Jacksonville. The contract prohibits the use of hazardous materials without compliance to IP025 and requires adherence to all transportation directives under DLAD Proc Notes C19 and C20. The item is designated as a critical application component, and all packaging data has been reviewed and released in SAP as of May 13, 2026.
MARITIME SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, FIXED, FILM
Solicitation # SPE7M0-26-T-034E
This contract specifies the procurement of a fixed film resistor identified by part number TNPW12062409BT-9 and NSN 5905014746356, with a quantity of one unit delivered FOB origin within five days. The item must comply with DLA packaging requirements under MIL-STD-2073-1E and marking standards per MIL-STD-129, including specific lead finish labeling in accordance with IPC/JEDEC J-STD-609, which requires accurate identification of Pb-free and other component attributes on each unit package. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date depending on acquisition size. The contractor must deliver to Fort Carson, Colorado, using traceable freight methods and avoid parcel post, with the shipment directed to the Central Receiving Point under the code W80BTZ. The contract includes strict zero variance in quantity, destination inspection and acceptance, and special marking requirements for compliance with federal standards. All data, including the point of contact, delivery date, and solicitation number, is tied to the DoD procurement system and is subject to government use and oversight.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, THERMAL
Solicitation # SPE7M5-26-T-396X
Offerors must comply with strict domestic sourcing requirements under the Berry Amendment and Buy American Act, with the Berry threshold lowered to $150,000, necessitating full disclosure of any non-domestic materials via written notification to the point of contact. The solicitation prohibits the use of covered telecommunications equipment or services as defined by FAR 52.204-24 and DFARS 252.204-7016, and explicitly bans items produced via additive manufacturing unless prior written approval is obtained. Small business joint ventures must submit specific representations for all applicable categories, including small business, service-disabled veteran-owned, women-owned, economically disadvantaged women-owned, and HUBZone status. Due to fluctuating demand, offerors are strongly encouraged to quote quantity ranges to allow buyers flexibility in combining or adjusting requirements without resolicitation, though this does not apply to Auto IDC. All vendors must register through DLA’s new Account Management & Provisioning System (AMPS) within two months to access the Vendor Shipment Module and continue shipping, with Web Services users required to update their internal schema by the specified deadline. Offerors intending to submit a quote after the closing date must file a “No Bid” on DIBBS with a reason or anticipated date to avoid assumptions of non-responsiveness. Fast Pay is not applicable. The item being procured is a thermal resistor, NSN 5905-01-193-7198, quantity of two units, with a delivery requirement of 275 days ADO, under solicitation SPE7M5-26-T-396X, managed by the Department of Defense’s Active Devices Division at Tinker AFB, with Jeanette Heisey as the primary point of contact.
ACTIVE DEVICES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334416
New
DIBBS
JACK, TIP
Solicitation # SPE7M5-26-T-399P
The contract pertains to the procurement of Emerson electronic connector, part number 105-0803-001, identified by NSN 5935-01-058-9244, under solicitation SPE7M5-26-T-399P. A total quantity of 1,163 units is required, split into two line items: six units at $6.00 each and 1,157 units at the same unit price, with no tolerance for quantity variance. Delivery must be completed within 165 days from the contract award, shipped FOB origin in compliance with MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements. All items must be prepared for delivery using specific packaging codes, containment types, and preservation methods, with no special marking required. Inspection and acceptance occur at the destination, and sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances unless otherwise stated. Critical attributes are assigned verification level VII with an AQL of 0.1. The product is classified as a critical application item. Shipping is directed to two DLA distribution points: Jacksonville, FL and Cherry Point, NC, with specific parcel and freight addresses provided. The contract adheres to DLA's technical and quality requirements as referenced in their master list, and transportation follows DLA procedures C19 and C20. The original delivery deadline was December 19, 2026, with a needed ship date of February 2, 2027.
ACTIVE DEVICES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334416
New
DIBBS
COIL, ELECTRICAL
Solicitation # SPE7M1-26-T-269L
The contract pertains to the procurement of a coil, electrical, identified by NSN 5950004360115 and part number MC13768, manufactured by Eaton Aerospace LLC for aerospace applications. A total quantity of 134 units is required, with delivery mandated to occur within 176 days from contract award, delivered FOB origin. Inspection and acceptance are to occur at the destination, with no tolerance allowed for quantity variance—plus or minus zero percent. Packaging must strictly comply with MIL-STD-2073-1E, including specific preservation methods, materials, and unit packaging codes, while marking adheres to MIL-STD-129 without special identifiers. Palletization follows DLA packaging standards, and hazardous material handling is governed by IP025. The delivery destination is Hill AFB, Utah, with the parcel post and freight shipping address specified accordingly. Quality assurance is governed by tailored higher-level requirements, including sampling protocols that mandate zero-defect acceptance under MIL-STD-1916 or ASQ H1331 Table 1 unless otherwise directed, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Unspecified attributes default to major classification. For simplified acquisitions, the referenced DLA Master List of Technical and Quality Requirements in effect on the solicitation issue date or award date applies, while large acquisitions depend on the RFP issue date unless amended. All technical and quality requirements are incorporated by reference from the DLA Master List. The contract is issued under solicitation SPE7M1-26-T-269L, with a response deadline in August 2026 and an original required delivery date of July 16, 2027. The point of contact is Ryan Snyder of the Department of Defense’s Maritime Supply Chain, with unit of issue specified per ANSI X12 standards.
MARITIME SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, FIXED, WIRE
Solicitation # SPE7M5-26-T-397B
This contract is for the procurement of fixed wire resistors under solicitation SPE7M5-26-T-397B, with a total quantity of two units to be delivered within 20 days to the USS CHUNG HOON DDG 93 at FPO AP 96662. The item is identified by NSN 5905-00-617-8225 and must conform to strict technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, incorporating referenced R and I numbers. The use of any Class I ozone-depleting substances is prohibited in all manufacturing and testing processes unless explicitly approved in writing by the contracting officer; mercury and mercury-containing compounds are also banned unless specifically exempted for designated functional applications such as batteries, sensors, or naval-referenced reagents, with portable mercury-containing devices required to have shockproof construction and a secondary containment boundary. Packaging must comply with MIL-STD-2073-1E and marking must adhere to MIL-STD-129, including IPC/JEDEC J-STD-609 lead finish identification on each unit package. The contract specifies FOB destination delivery with zero quantity variance, inspection and acceptance at the delivery point, and requires compliance with DLA transportation procedures for vessel and RDD 777 shipments. Only approved vendors with designated part numbers from WARD LEONARD CT LLC, MARATHONNORCO AEROSPACE, INC., and OHMITE HOLDING, L.L.C. are eligible, and full and open competition is enforced. The contract is governed under federal procurement rules, with the purchase unit of issue being EA and unit price set at $2.00 per unit.
ACTIVE DEVICES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334416
New
DIBBS
POWER SUPPLY, UNINTE
Solicitation # SPE7L7-26-T-4676
The contract is for the procurement of four unintermittent power supplies with NSN/Part Number 6130-20-001-8381, issued under solicitation SPE7L7-26-T-4676 by the Department of Defense through the DDSP New Cumberland Facility. The delivery deadline is 88 days after award, and responses must be submitted by August 20, 2026. The solicitation incorporates all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, with the controlling revision determined by the solicitation issuance or award date depending on the acquisition size. The offeror must provide a complete data package for both the approved and alternate parts, and no government identification may be removed from non-accepted supplies. The point of contact is Maria Blaney, reachable via email and phone, and the place of performance is specified as New Cumberland, PA, 17070-5002. The procurement falls under NAICS code 334416 and is classified as a federal solicitation with no set-aside designation.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

NAICS: 541690
New
DIBBS
Hazardous Materials Compliance and LabelingThe contract requires strict adherence to the OSHA Hazard Communication Standard (29 CFR 1910.1200) for the handling, labeling, and documentation of hazardous materials. This includes the accurate preparation and maintenance of Safety Data Sheets for all regulated substances, as well as the proper application of hazardous material labels in compliance with federal requirements. The work is governed under a subcontract arrangement with the Defense Logistics Agency, part of the Department of Defense, and performance is expected at the FPO location with ZIP code 09534. The solicitation was posted on August 9, 2026, and responses are due by August 20, 2026. The NAICS code 541690 indicates this procurement is for other scientific and technical consulting services, suggesting the contractor will provide expert compliance support rather than manufacturing or physical distribution of materials.
Other Scientific and Technical Consulting Services

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 493190
New
DIBBS
Military-Compliant Packaging and PreservationThe contract requires compliance with MIL-STD-2073-1E for the packaging and preservation of mandrels and expanders, specifically incorporating cleaning and drying procedures followed by preservation method 30 as mandated by DLA RP001. All work must adhere strictly to these military standards to ensure long-term protection, readiness, and functionality of the equipment during storage and transit. The task is scoped under a subcontract and is tied to Defense Logistics Agency operations, with performance occurring at the FPO location with ZIP code 09534. The solicitation was posted on August 9, 2026, and responses are due by August 20, 2026, indicating a compact window for submission. The NAICS code 493190 categorizes this effort under Other Transportation Support Activities, reflecting its logistical and supply chain nature. While no specific point of contact or set-aside details are provided, the involvement of the Department of Defense and the Defense Logistics Agency underscores the critical nature of the work in supporting military logistics and equipment integrity. Subcontractors must ensure full alignment with all cited standards and timelines to meet contractual obligations.
Other Warehousing and Storage

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339999
New
DIBBS
Component Marking and Labeling ServicesThe contract requires the application of permanent markings on mandrels and expanders, including the manufacturer name, contract number, and stock number, in accordance with specified military standards. Additionally, linen tags must be attached in full compliance with MIL-STD-129 requirements, ensuring standardized identification and traceability for defense logistics purposes. The work is classified as a subcontract under NAICS code 339999 and is managed by the Defense Logistics Agency under the Department of Defense, with performance designated to FPO 09534. The solicitation was posted on August 9, 2026, and responses are due by August 20, 2026, with no set-aside type specified. The exact point of contact details are not provided, and the contract can be referenced via the official DIBBS platform using the provided link.
All Other Miscellaneous Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332721
New
DIBBS
Precision Machining of Mandrels and ExpandersThe contract calls for the precision manufacturing of mandrels and expanders in strict accordance with military drawing 5000-s5101-1385500, requiring advanced CNC machining to achieve tight dimensional tolerances and full material compliance with military specifications. The work involves high-accuracy fabrication processes suitable for defense applications, where consistency and reliability are critical to performance and safety. All components must meet exacting standards for geometry, surface finish, and material properties as defined by the referenced drawing. This is a subcontract opportunity under the NAICS code 332721, managed by the Defense Logistics Agency on behalf of the Department of Defense. Responses are due by August 20, 2026, and the place of performance is designated as FPO with ZIP code 09534. The contract was posted on August 9, 2026, and is accessible via the DIBBS platform for qualified subcontractors to submit proposals. No set-aside designation is specified, and all eligible entities may respond provided they can fulfill the technical and compliance requirements.
Precision Turned Product Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 483111
New
DIBBS
Domestic and International Transportation by SeaThe contract governs the transportation of supplies by sea using U.S.-flag vessels, ensuring compliance with federal requirements for domestic and international maritime shipping. All shipments must be conducted through vessels that are U.S.-owned and -operated, and contractors are required to provide advance notice of planned transports along with ongoing compliance reporting to maintain accountability and regulatory adherence. This obligation applies regardless of the origin or destination of the supplies, reinforcing the priority of U.S. maritime interests in the movement of goods under this agreement. The contract is administered by the Defense Logistics Agency under the Department of Defense, with performance centered at FPO, ZIP 96691, indicating operations tied to military postal addresses often serving overseas installations. The NAICS code 483111 confirms the focus on water transportation of freight and cargo. As a subcontract, this arrangement supports broader federal logistics efforts and requires precise coordination with upstream contractors and government entities. Responses must be submitted by August 20, 2026, with the solicitation posted on August 9, 2026, leaving a limited window for interested parties to prepare and submit proposals through the designated DIBBS portal.
Deep Sea Freight Transportation

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 561990
New
DIBBS
Radioactive Materials Special Handling (If Applicable)The contract requires strict adherence to labeling protocols for radioactive materials when the specific activity exceeds 0.002 microcuries per gram or the total activity reaches or exceeds 0.01 microcuries. Proper marking is mandatory to ensure compliance with safety and regulatory standards, and the contractor must implement procedures to identify, tag, and document all such materials in accordance with established guidelines. This requirement applies to all handling, storage, and transport activities associated with the subcontract and must be consistently followed throughout the performance period. This is a subcontract under the Defense Logistics Agency, part of the Department of Defense, with a place of performance listed as FPO with ZIP code 96691. The solicitation was posted on August 9, 2026, and responses are due by August 20, 2026. The NAICS code 561990 indicates it falls under Other Support Services, suggesting the work involves specialized logistical or operational support functions related to radioactive material handling. The contract does not specify a set-aside type, and no point of contact details are provided in the available data.
All Other Support Services

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 561990
New
DIBBS
Hazardous Materials Handling and LabelingThe contract requires the proper handling and labeling of hazardous materials in full compliance with OSHA’s 29 CFR 1910.1200 and the Defense Federal Acquisition Regulation Supplement clause 252.223-7001, ensuring all safety data sheets and hazard communication protocols are strictly followed. Performance is tied to the Defense Logistics Agency under the Department of Defense, with work to be executed at a military postal address in FPO with zip code 96691, indicating operations may occur in a deployed or overseas context. The solicitation, classified as a subcontract under NAICS code 561990 for other support services, was posted on August 9, 2026, with responses required by August 20, 2026. No set-aside preferences are specified, and the work demands rigorous adherence to federal safety standards for chemical communication and hazardous material management without exception.
All Other Support Services

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 561910
New
DIBBS
Military-Compliant Marking and BarcodingThis contract requires the application of standardized markings and barcodes to military shipments in strict compliance with MIL-STD-129 to enable automated identification, tracking, and storage across the defense logistics network. The work must be performed to support the Department of Defense’s supply chain integrity, ensuring all packages and containers are properly labeled with compliant data structures, including machine-readable barcodes and human-readable information as mandated by the standard. The contract is classified as a subcontract and is administered by the Defense Logistics Agency under NAICS code 561910, indicating it pertains to other support activities for transportation and logistics. Performance is expected to occur at a military postal address with ZIP code 96691, designated as FPO, reflecting the global nature of the delivery requirements. Responses are due by August 20, 2026, and interested parties must submit through the official DIBBS portal prior to the deadline.
Packaging and Labeling Services

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 561910
New
DIBBS
Military-Compliant Packaging ServicesThe contract requires the packaging of supplied items in full compliance with MIL-STD-2073-1E standards to ensure proper preservation and environmental protection throughout shipment and storage. This includes all necessary materials, procedures, and documentation to safeguard defense-related equipment from degradation due to moisture, corrosion, vibration, and other environmental hazards during transit and long-term storage. The work must meet rigorous military specifications to maintain operational readiness and ensure items arrive in mission-ready condition. This is a subcontract under the Defense Logistics Agency, part of the Department of Defense, with a place of performance listed as FPO, ZIP 96691. The solicitation was posted on August 9, 2026, with a response deadline of August 20, 2026, and is classified under NAICS code 561910, indicating it relates to other support activities for transportation and logistics. The nature of the requirement suggests the need for specialized packaging expertise aligned with federal defense standards, and interested parties must submit proposals through the designated DIBBS platform prior to the deadline.
Packaging and Labeling Services

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332912
New
DIBBS
Butterfly Valve Supply (Commercial Off-The-Shelf Item)The contract solicits the supply of two commercial off-the-shelf butterfly valves designated by NSN 4820016554275, adhering to Defense Logistics Agency specifications. These items are classified under NAICS code 332912 and are intended as subcontracted deliverables to fulfill a requirement of the Department of Defense. The procurement is open for response until August 20, 2026, with the solicitation initially posted on August 9, 2026. Performance of the contract is to be executed at a military post office location with the zip code 96691, indicating delivery to a U.S. defense installation via overseas or remote logistics channels. The procurement is conducted through the DLA’s online procurement system, and no set-aside provisions or specific small business preferences are indicated.
Fluid Power Valve and Hose Fitting Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance (NIST SP 800-171) ImplementationThe contract requires the implementation and documentation of cybersecurity safeguards mandated by NIST Special Publication 800-171 to protect Controlled Unclassified Information in alignment with Defense Federal Acquisition Regulation Supplement requirements. The work involves deploying technical, administrative, and physical controls to ensure compliance across all systems handling such information, with full documentation to demonstrate adherence to each of the 110 security requirements outlined in the NIST framework. Execution must be completed within the specified performance timeline and verified through auditable records, ensuring readiness for government assessment. This subcontract is issued under the Department of Defense’s Defense Logistics Agency with a NAICS code of 541512, indicating it falls under Computer Systems Design and Related Services. The place of performance is listed as FPO with a ZIP code of 96322-0001, suggesting operations may occur in a deployed or mobile military environment. The solicitation opened on August 9, 2026, and responses are due by August 20, 2026, with all work tied to meeting stringent federal cybersecurity standards for defense contractors handling sensitive but unclassified data.
Computer Systems Design Services

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 561990
New
DIBBS
Military Packaging, Packing, and Preservation ServicesThe contract requires the provision of military-compliant packaging, preservation, and marking services for air conditioning units destined for overseas shipment and long-term storage, adhering strictly to MIL-STD-129 and Defense Logistics Agency standards. All work must ensure the units are protected against environmental degradation, properly labeled, and documented to meet rigorous military logistics requirements for global deployment and inventory management. The services must align with the technical specifications and procedural controls mandated by the Department of Defense for defense-related shipments. This is a subcontract opportunity issued by the Defense Logistics Agency under NAICS code 561990, with a response deadline of August 20, 2026. Performance is required at the FPO address with ZIP code 96322-0001, indicating operations will support overseas military logistics networks. The posting date is August 9, 2026, and all bids must be submitted through the DIBBS portal using the solicitation reference SPE8E826T5113. Bidders must be prepared to meet exacting standards for packaging materials, corrosion prevention, barcode labeling, and documentation to ensure seamless integration into military supply chains.
All Other Support Services

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details