Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

BEAKER, LABORATORY

Active
SPE2DH-26-T-5611Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of 107 laboratory beakers made of polypropylene with a capacity of 600 mL, identified by NSN 6640-00-889-1834, under solicitation SPE2DH-26-T-5611. All items must comply with Specification A-A-51326 dated 23 January 1986 and adhere to technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue date or award date depending on the acquisition size. Packaging must meet commercial standards as defined in the procurement document, with each unit securely sealed in a container that prevents damage or breakage, and all shipments packed in commercial exterior containers suitable for safe transport via common carrier at the lowest possible cost to the delivery point in New Cumberland, PA, 17070-5002. Labeling must follow Medical Marking Standard No. 1, which supersedes MIL-STD-129, and copies of this standard can be obtained through DLA Troop Support. The contract also includes provisions for covered defense information, DLA packaging requirements, and the removal of government identification from non-accepted supplies. The response deadline is August 5, 2026, with a delivery requirement of 29 days after award, and the point of contact is Tina Vu of the Department of Defense Medical Supply Chain FSH.

General Info

Procure 107 polypropylene 600 mL beakers, NSN 6640-00-889-1834, deliver to New Cumberland, PA by 29 days post-award.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIIN FSHView Agency

NAICS

333998 - All Other Miscellaneous General Purpose Machinery ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIIN FSH
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIIN FSH
View Agency Profile
Office AddressUS
Contacts
Tina Vu
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BEAKER,LABORATORY
BEAKER, LABORATORY, POLYPROPYLENE, 600 ML
.
UNIT OF ISSUE EACH (EA)
.
SHALL BE IAW SPECIFICATION A-A-51326 DATED 23 JANUARY 1986
.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
.
.
ADEQUATE DATA FOR THE NSN/Part Number: 6640-00-889-1834 Quantity: 107 EA Purchase Request: 7017673206QTY: 107 Delivery: 29 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333998
New
DIBBS
FILTER ELEMENT, FLUI
Solicitation # SPE7L1-26-T-890F
The contract is for the procurement of a fluid filter element identified by NSN 4330150144194 and part number 5801415504 from IVECO DEFENCE VEHICLES S.P.A., under solicitation SPE7L1-26-T-890F, which is a total small business set-aside. The item is classified as a commercial item and must comply with the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, which take precedence over all other standards including ASTM D3951. Packaging must follow MIL-STD-129 for marking and labeling, and palletization must adhere to DLA Packaging Requirements for Procurement (RP001). The contract specifies a quantity of 106 units with no variance allowed, to be delivered FOB origin within 98 days of contract award, with delivery directed to the DLA Distribution facility in New Cumberland, Pennsylvania. Inspection and acceptance occur at the destination, and the unit of issue is each (EA) at a unit price of $106.00, totaling $11,236.00. The original required delivery date is September 5, 2026, with a needed ship date of November 17, 2026. Transportation and shipping are governed by DLAD procedural notes C19 and C20, and all documentation must reference the authorized DoD unit of issue. The solicitation, issued by the Department of Defense's Land Supply Chain, has a response deadline of August 10, 2026, with Katherine Woods as the primary point of contact.
LAND SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333998
New
DIBBS
TIE DOWN, CARGO, VEHI
Solicitation # SPE8EF-26-T-1526
The contract is for the procurement of 10 units of TIE DOWN, CARGO, VEHICLE with NSN 3990-01-412-1518 and part number 3100207G019-008 from KINEDYNE LLC, under solicitation SPE8EF-26-T-1526. Delivery is required within 20 days from the contract award, with shipment FOB origin and no tolerance for quantity variance. Inspection and acceptance occur at the destination, and all items must be packaged in strict compliance with ASTM D3951, while also adhering to the more stringent DLA Master List of Technical and Quality Requirements, MIL-STD-129 marking and labeling guidelines, and DLA packaging standards outlined in RP001. Palletization must follow DLA-specific requirements, and shipments must be sent via traceable means—parcel post is prohibited. The delivery address and marking instructions are designated to W90D5M at 155 Bruce Drive, Dickson TN 37055-0248, with the original required delivery date set for July 24, 2026. The unit of issue is each, with a total price of $10.00 per unit, and the item falls under NAICS code 333998. Technical and quality standards referenced in the DLA Master List take precedence over all other specifications, and configuration changes or deviations require formal engineering change proposals or variance requests. Government use metadata, including project codes and distribution identifiers, are embedded for internal tracking.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 19 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333998
New
DIBBS
TRACK PLATE, INSTALLATI
Solicitation # SPE7M2-26-T-5784
The contract pertains to the procurement of a track plate, installation item with NSN 5999-01-289-0868 and part numbers assigned to multiple suppliers including INDAL TECHNOLOGIES INC, FEDERAL EQUIPMENT CO, SIGMATION INC, and NAVPAR INC. The item is classified as a critical application and must meet all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with drawings and specifications governing design, marking, and performance. All bare items must be marked with the contract number, NAWC CAGE code, and part number per applicable drawings, and packaging must comply with MIL-STD-2073-1E and marking requirements of MIL-STD-129, including the designated package code U and preservation methods. The item is subject to zero tolerance for quantity variance, delivery FOB origin, and inspection and acceptance at destination. Mercury and mercury compounds are strictly prohibited except for specific exempted uses such as functional batteries or sensors, and any permitted devices must include a secondary containment barrier per NAVSEA guidelines. The contract mandates adherence to MIL-STD-1916 or ASQ H1331 sampling plans with zero non-conformances unless otherwise specified, and requires a Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment. Delivery is due in 217 days from contract award, with a required ship date of March 16, 2027, and final delivery to DLA Distribution Puget Sound in Bremerton, WA. The solicitation is a Women-Owned Small Business Set-Aside under NAICS 333998, with a unit price of $11.00 per unit for a total of 11 units.
NUCLEAR REACTOR PROGRAM

POSTED

about 19 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333998
New
DIBBS
FILTER ELEMENT, FLUID
Solicitation # SPE7M1-26-T-237V
This contract specifies the procurement of a fluid filter element identified by NSN 4330-01-458-6214 and part number X53248 from Lawrence Factor, Inc., with a total quantity of 288 units to be delivered in 88 days under solicitation SPE7M1-26-T-237V. The item is classified as a critical application product and must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements. The contract prohibits the use of class I ozone-depleting chemicals entirely and strictly forbids the intentional addition of mercury or mercury-containing compounds in any supplied hardware, with narrow exceptions limited to functional uses in specified batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and chemical reagents authorized by NAVSEA; portable devices containing mercury must be shockproof and include a secondary containment barrier. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 specifications, with marking indicating shelf life and palletization following DLA packaging requirements. Delivery is FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at the destination. The contract includes a zero variance tolerance on quantity and requires compliance with all applicable transportation protocols outlined in DLAD proc notes C19 and C20. The solicitation is set aside exclusively for Women-Owned Small Businesses under NAICS code 333998, and the primary point of contact is Michael Reese, with the response deadline set for August 10, 2026.
MARITIME SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333998
New
DIBBS
ROD
Solicitation # SPE7M2-26-T-5783
This contract pertains to the procurement of two units of item NSN 1710-00-564-1865 under solicitation SPE7M2-26-T-5783, with a delivery deadline 161 days after contract award. The item is classified as containing technical data subject to U.S. export control regulations, either ITAR or EAR, meaning any disclosure to foreign persons—regardless of location—is strictly prohibited without prior authorization from the Department of State or Commerce. Access to this technical data is restricted to DLA contractors who possess an approved US/Canada Joint Certification Program certification, have completed mandatory DOD export control training and the DLA Export-Controlled Technical Data Questionnaire, and have received formal approval from DLA to handle such data. DFARS 252.225-7048 governs compliance. The contract is issued by the Department of Defense under the Nuclear Reactor Program, with performance occurring in New Cumberland, Pennsylvania, and all responses must be submitted by August 10, 2026. Primary point of contact is Alisha Blanton at DLA.
NUCLEAR REACTOR PROGRAM

POSTED

about 19 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333998
New
DIBBS
AX, PICK HEAD
Solicitation # SPE8E9-26-T-3271
The contract is for one AX PICK HEAD with NSN 4210-01-653-2182 under solicitation SPE8E9-26-T-3271, with a response deadline of August 10, 2026, and a required delivery within 20 days of award. The item is classified under NAICS code 333998 and is being procured by the Department of Defense through the Construction & Equipment MRO Service I office. All technical and quality requirements referenced by R or I numbers must be sourced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with DLA packaging standards, and all supplies must adhere to MIL-STD-130N for identification marking. Mercury and mercury-containing compounds are strictly prohibited unless specifically exempted for functional components such as batteries, fluorescent lights, instruments, sensors, weapon systems, or chemical reagents authorized by NAVSEA; any exempted mercury-containing portable devices must include shockproof design and a secondary containment boundary. Documentation for source approval requests and removal of government identification from non-accepted items are subject to contractual requirements. The point of contact is Matthew Kruc, with delivery to FPO, ZIP 96675-9600.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 19 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333998
New
DIBBS
FILTER, AIR, PLASMA THAW
Solicitation # SPE2DH-26-T-5616
The contract is for a FILTER, AIR, PLASMA THAWING SYSTEM, identified by NSN 6640-01-623-9031, with a unit of issue of one package containing four units. The equipment is intended for use with the CYTOTHERM MDL CT-D4 Thawing System, specifically for plasma and frozen blood thawing applications. Compliance with DLA’s Master List of Technical and Quality Requirements is mandatory, with the applicable version determined by the solicitation or award date depending on acquisition size. Packaging must adhere to DLA procurement standards, and all supplies must be free of intentional mercury or mercury-containing compounds, except for specific exempt uses such as batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or authorized chemical reagents. Any portable fluorescent lamps or instruments containing mercury must be shockproof and include a secondary containment barrier as per NAVSEA 5100-003D. The solicitation, numbered SPE2DH-26-T-5616, was posted on July 29, 2026, with a response deadline of August 5, 2026. The contracting agency is the Department of Defense through the Medical Supply Chain FSH, and delivery is required within 20 days after delivery order. Point of contact is Tina Vu, reachable via email and phone listed.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 333998
New
Federal
FILTER,FLUID
Solicitation # N0010426QJB92
This contract pertains to the repair of a FILTER,FLUID under solicitation N0010426QJB92, with a mandatory Repair Turnaround Time (RTAT) of 26 days measured from the physical receipt of the asset at the contractor’s facility as recorded in the Commercial Asset Visibility (CAV) system. The Government requires strict adherence to this timeline, with penalties applied per unit per month for unexcused delays, up to a specified maximum reduction, and reserves the right to terminate for default. All repairs must comply with the manufacturer’s technical standards, drawings, and applicable military specifications, including MIL-STD-130 Rev N for marking. The contractor must perform all inspection and testing in accordance with original equipment specifications and maintain complete records for at least 365 days after final delivery. Government Source Inspection is required, and freight is FOB Origin, with the Navy handling logistics under the CAV Statement of Work. The contract includes mandatory compliance with Buy American Act provisions, cybersecurity maturity certification requirements, and a Small Business Subcontracting Plan. An option to increase quantity is available for up to 365 days after award, with pricing locked at the awarded unit rate. Contractors must provide detailed pricing justification, particularly if the item is newly sourced or pricing exceeds historical levels, and must submit documentation proving authorization as a distributor of the original manufacturer’s part. The item must be repaired to meet the specified CAGE code and reference number (18350 / AJ-A958-40), and any design or part number changes require prior written approval from the contracting officer. Responses must include quote amount, RTAT, and pricing comparison to new unit cost and lead time. The solicitation is closed to non-authorized distributors, requiring formal proof of authorization submitted with the offer, and all technical documents provided by the Navy carry distribution restrictions under OPNAVINST 5510.1. Final award is bilateral and requires the contractor’s signed acceptance.
Navsup Weapon Systems Support Mech

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 333998
New
Federal
SERVER,AUTOMATIC DA
Solicitation # SPRMM126QKG54
This contract pertains to the procurement of a SERVER,AUTOMATIC DA under solicitation SPRMM126QKG54, issued by DLA Mechanicsburg with performance governed by strict technical and quality standards. The item must comply with MIL-STD-130 Rev N for marking, and no substitutions or design changes are permitted without prior written approval from the NAVICP-MECH Contracting Officer, with specific code classifications required for any permitted modifications. The specification prohibits refurbished materials and mandates that all components be mercury-free, with stringent controls against contamination, including testing protocols and mandatory warning labels if mercury use is exceptionally approved. All suppliers must be authorized distributors of the original equipment manufacturer, providing proof of authorization, and must fully adhere to traceability and certification requirements under clauses such as DLATERMHZ01. The contract enforces compliance with CMMC Level 1 self-attestation, Federal Acquisition Supply Chain Security Act prohibitions, and mandatory use of the WAWF system for invoice and receiving report submissions. Performance obligations are subject to inspection at source per DLA Procurement Note E06, with final acceptance determined at a designated facility to be specified. The contractor is fully responsible for quality assurance, maintaining complete inspection records for 365 days after final delivery, and must not submit defective material even under sampling provisions. Packaging must conform to MIL-STD-2073 as referenced in the schedule, and production facility changes require formal requests with documented administrative cost reductions and non-disruption to small business or labor surplus commitments. Proposals are evaluated under Lowest Price Technically Acceptable criteria, and all submissions must be electronically transmitted via EDA and PIEE-WAWF. Contractors are required to register for EDA, comply with NOFORN and distribution statement controls on technical documents, and provide point-of-contact details for communications and automated notifications. The offer is valid for a specified period, delivery timelines are to be confirmed, and any deviation from solicitation terms must be explicitly stated at submission or will result in award based solely on stated requirements.
SPRMM1 DLA Mechanicsburg

POSTED

1 day ago

DEADLINE

in 29 days
View Details
NAICS: 333998
New
Federal
Wuji Gloves *No Substitutes*
Solicitation # AH481777
Brookhaven Science Associates, LLC is soliciting a Firm Fixed Price quotation for three specific items: one Wuji Hand_R2, one Wuji Hand_L2, and one Wuji Glove, with no substitutes permitted. The quotation must be all-inclusive, covering the full cost of delivery to Brookhaven National Laboratory in Upton, New York, including any applicable tariffs, with no additional fees allowed on the resulting purchase order. Payment terms are NET30, and pricing must remain valid for 60 days. Respondents are required to provide the origin of manufacture, their Unique Entity Identifier, and documentation to justify pricing, such as a published price list, prior BNL purchase order, or verifiable web-based pricing. All vendors must be registered in the System For Award Management (SAM) with an active UEI, and registration must be completed prior to award consideration. The solicitation, identified as AH481777, is open to all eligible offerors without set-aside restrictions, and award will be made to the lowest-priced responsive and responsible bidder meeting all technical requirements. Responses are due by August 10, 2026, at 5:00 PM EST, and any resulting contract will be governed by the attached terms and conditions.
Brookhaven National Labor -Doe Contractor

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 333998
New
Federal
STATOR RAIL ASSY
Solicitation # SPRMM126QGF30
The contract pertains to the procurement of a STATOR RAIL ASSY under solicitation number SPRMM126QGF30, issued by the Department of Defense through DLA Mechanicsburg, with a response deadline of August 28, 2026. All contractual documents are considered issued upon electronic transmission, and offers must be submitted via Electronic Data Interchange (EDI) with clear specification of any deviations, or risk award based solely on solicitation terms. Contractors not the original equipment manufacturer must disclose the OEM’s CAGE code and part number, and all submissions require a contact email for follow-up. Compliance with MIL-STD-129 for marking and ISO 9001 for quality systems is mandatory, and any design, material, or part number changes require prior written approval from the Contracting Officer, categorized by predefined code systems (Code 1–6) with documentation of reasoning and drawings where applicable. The item must be free of metallic mercury and contamination, with strict protocols for any exceptions requiring formal approval and warning labels. Inspection and acceptance occur at the contractor’s facility, with the Government retaining rights to conduct independent verification. Packaging must adhere to MIL-STD-2073, and records of all inspections must be retained for four years post-delivery. Contractors must register for the Electronic Document Access portal and use the Wide Area Workflow (WAWF) system to submit invoices and receiving reports electronically. The contract prohibits unauthorized changes to production facilities without a $250 administrative cost reduction and written approval. Only authorized distributors of the original manufacturer are eligible for award, and distributors must provide proof of authorization on company letterhead. All technical data provided by the Navy is subject to distribution statement controls, with compliance required under OPNAVINST 5510.1. Contractors are also bound by Buy American provisions, Security Prohibitions, and other federal directives embedded in the contract.
SPRMM1 DLA Mechanicsburg

POSTED

1 day ago

DEADLINE

in 29 days
View Details
NAICS: 333998
New
Federal
Procurement of Main Engine Lube Oil Purifiers
Solicitation # 1333MK26Q0109
The U.S. Department of Commerce, through its OMAO Field Delegates, is seeking to procure main engine lube oil purifiers for the NOAA Ship Fairweather under solicitation number 1333MK26Q0109. This federal procurement is targeted toward small business concerns as defined by the Small Business Administration, with the NAICS code 333998 covering other miscellaneous manufacturing. The solicitation was posted on July 29, 2026, and responses are due by August 13, 2026, at 11:00 PM Eastern Time. While the primary place of performance is listed as Ketchikan, AK, where the vessel is based, the contracting office is located in Kansas City, Missouri. Isaac Bright, the designated Contracting Officer, serves as the point of contact for all inquiries and can be reached via email at isaac.bright@noaa.gov. The procurement is conducted through FedConnect, with the full solicitation document available at the provided UI link.
OMAO Field Delegates

POSTED

1 day ago

DEADLINE

in 14 days
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIIN FSH

Same awarding agency

NAICS: 488510
New
DIBBS
Defense Logistics and Transportation Coordination (U.S.-Flag Vessel Compliance)This contract requires the coordination of transportation for defense supplies with strict adherence to DFARS 252.247-7023, mandating the use of U.S.-flag vessels for ocean freight wherever applicable to ensure compliance with federal maritime regulations. All logistics activities must support the Department of Defense’s medical supply chain objectives, focusing on secure, timely, and regulated movement of critical defense materiel. The performance location is designated as FPO with ZIP code 96662, indicating operations may involve overseas or maritime transit routes governed by U.S. flag requirements. The solicitation, issued under NAICS code 488510 for support activities for transportation, is structured as a subcontract with a response deadline of August 4, 2026, and was posted on July 29, 2026, indicating a narrow window for proposers to submit compliant bids.
Freight Transportation Arrangement

POSTED

about 19 hours ago

DEADLINE

in 5 days
View Details
NAICS: 541620
New
DIBBS
Hazardous Materials Handling and SDS Compliance ProviderThe contract requires the provision of Safety Data Sheets (SDS) for hazardous components within the NSN item, ensuring full compliance with OSHA’s Hazard Communication Standard. This includes the accurate application of hazard labels that meet federal requirements, enabling safe handling, storage, and disposal of dangerous materials throughout the supply chain. All deliverables must align with current HazCom regulations to support military medical supply operations, with performance centered at FPO, ZIP 96662. The work falls under NAICS code 541620 and is structured as a subcontract under the Department of Defense’s Medical Supply Chain FSH, with responses due by August 4, 2026. Contractors must demonstrate expertise in hazardous materials documentation and labeling to maintain regulatory compliance and operational readiness.
Environmental Consulting Services

POSTED

about 19 hours ago

DEADLINE

in 5 days
View Details
NAICS: 385990
New
DIBBS
Military Packaging and Labeling Compliance ServiceThe contract requires compliance with MIL-STD-129 standards for the packaging, labeling, and palletization of serialized military containers, ensuring full adherence to Department of Defense logistical and identification protocols. The work involves securing, marking, and arranging military shipments in a manner that supports traceability, inventory accuracy, and handling efficiency throughout the supply chain, with all labeling and packaging elements meeting strict government specifications for barcodes, data matrix codes, and container identification. This subcontract is issued under NAICS code 385990 and is associated with the Medical Supply Chain FSH under the Department of Defense. Performance is to be executed at FPO with a ZIP code of 96662, and responses must be submitted by August 4, 2026. The solicitation is open for qualified vendors capable of delivering end-to-end packaging and labeling services compliant with military serialization requirements, with an emphasis on accuracy, timeliness, and regulatory alignment across all stages of container preparation for shipment.

POSTED

about 19 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339112
New
DIBBS
Defense Medical Equipment Supplier – NSN 6630121893126The contract seeks the supply and delivery of NSN 6630121893126 under strict military standards for packaging and labeling, ensuring full compliance with all applicable Department of Defense protocols. Delivery must be made FOB destination, meaning the supplier assumes responsibility for the item until it reaches the specified delivery point in FPO with zip code 96662. The item falls under NAICS code 339112, indicating it pertains to surgical and medical instrument manufacturing, and is issued as a subcontract through the Medical Supply Chain FSH under the Department of Defense. All responses are due by August 4, 2026, with the solicitation posted on July 29, 2026, and further details available via the provided DIBBS link.
Surgical and Medical Instrument Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339113
New
DIBBS
TRAINING AID, CHEST SEA
Solicitation # SPE2DH-26-T-5612
This training aid is designed specifically for practicing the application of vented and occlusive chest seals, mimicking the form and function of the Hyfin vent chest seal but with a less aggressive adhesive suitable for repeated use on both human skin and training manikins. It includes a gauze pad in each package to properly prep the wound surface prior to seal application, ensuring realistic training conditions. The device enables trainees to accurately practice placement of the chest seal and the vent component over a simulated wound, reinforcing critical field techniques. The product is latex-free and packaged in units of two seals per package, with the procurement requiring ten packages. The item is identified by NSN 6910-01-690-8679 and is subject to technical and quality requirements referenced in the DLA Master List, with packaging and labeling governed by DLA standards. Bidders must provide the source and part number being supplied. The solicitation, issued under SPE2DH-26-T-5612, has a response deadline of August 5, 2026, with delivery expected within twenty days after order award. The contract is managed by the Department of Defense through the Medical Supply Chain FSH office, with performance occurring in Annville, Pennsylvania, and primary point of contact being Tina Vu.
Surgical Appliance and Supplies Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334519
New
DIBBS
BLOOD COLLECTING UNIT
Solicitation # SPE2DH-26-T-5617
The Blood Collecting Unit is a medical device featuring a 7-inch tubing with a Luer adapter and a 21-gauge needle measuring 0.75 inches, equipped with a manually activated safety shield that fully covers the needle upon use to enhance user safety. Each unit is packaged in quantities of 200 per PG, with the unit of issue defined as one PG equaling 200 individual units. This item is subject to stringent technical and quality requirements as outlined in the DLA Master List of Technical and Quality Requirements, and it is classified as a TYPE I (CODE Q) item with a non-extendable shelf life of 36 months, requiring that no more than five months have elapsed from the date of manufacture to the date of delivery to the government. All packaging must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and must include clear markings for the date of manufacture, expiration or retest date, and the contract or lot number in accordance with the latest revision of MMS1C. Packaging must be commercial-grade, sealed to prevent damage, and arranged in exterior shipping containers suitable for safe transport via common carrier at the lowest possible rate to the designated delivery point at Fort Bliss, Texas. The item is governed by the procurement document SPE2DH-26-T-5617, and bidders must provide the source and part number being supplied, in addition to adhering to all applicable DLA packaging and labeling directives, including the removal of government identification from non-accepted supplies and the safeguarding of covered defense information. The solicitation was posted on July 29, 2026, with a response deadline of August 5, 2026, and a required delivery timeframe of 20 days after award.
Other Measuring and Controlling Device Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
SYRINGE, LABORATORY
Solicitation # SPE2DH-26-T-5613
The contract solicits 300 packages of 10 cc laboratory syringes, with each package containing 100 units, for a total of 30,000 syringes, under the NSN 6640-01-678-1647. Delivery is required within 85 days after award, and the purchase request number is 7017674629. The solicitation is issued under SPE2DH-26-T-5613, with a response deadline of August 5, 2026, and was posted on July 29, 2026. The National Industrial Classification System code is 339113, and the procurement is managed by the Department of Defense through the Medical Supply Chain FSH office, with performance located in New Cumberland, Pennsylvania, zip code 17070-5002. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and the applicable revision depends on whether the acquisition is simplified or large, with the controlling revision determined by the solicitation or amendment date. Packaging must comply with DLA packaging standards, and suppliers must remove all government identification from non-accepted supplies. Primary point of contact for inquiries is Tina Vu, reachable via email and phone provided.
Surgical Appliance and Supplies Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334516
New
DIBBS
MEASURING TUBE, GAS
Solicitation # SPE2DH-26-T-5587
The measuring tube for gas analyzer is designed to measure carbon dioxide content in compressed gases with a range of 100 to 3000 parts per million for one liter of air. It is a glass tube with rounded, melted tips and is sold in packages of ten, identified under unit of issue PG. This item is governed by the DLA Master List of Technical and Quality Requirements and is subject to specific packaging standards as outlined in DLA Packaging Requirements, with all packaging required to comply with Medical Marking Standard No. 1, replacing MIL-STD-129. Each unit must be securely sealed in a commercial container to prevent breakage and shipped in appropriate exterior containers to ensure safe delivery at the lowest carrier rate to the designated delivery point. The item has a non-extendable shelf life of 24 months, with no more than three months allowed to have elapsed from the date of manufacture to the date of government delivery. Labeling must include the date of manufacture, expiration or retest date, contract number, and lot number in accordance with the latest revision of MMS1C. This item is classified as a TYPE I (CODE M) shelf-life item under SPE2DH-26-T-5587, and it is subject to requirements for the removal of government identification from non-accepted supplies and potential classification as covered defense information. The National Stock Number is 6630-12-189-3126, with one package required under purchase request 7017017029, and delivery must be completed within 20 days ADO. The solicitation was issued by the Department of Defense’s Medical Supply Chain FSH with a response deadline of August 4, 2026, and additional details are accessible via the provided DIBBS link.
Analytical Laboratory Instrument Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 5 days
View Details
NAICS: 423450
New
DIBBS
PROBE, SPARK PLUG, AUTOC
Solicitation # SPE2DH-26-T-5615
The contract specifies the procurement of a single spark plug probe, identified by NSN 6530-01-337-8671 and purchase part number 32510-49940, intended for use on autoclave model 3500 series equipment. The item is not regulated by the FDA and must be furnished in strict compliance with DLA packaging and marking standards, including Medical Marking Standard No. 1, which supersedes MIL-STD-129. All packaging must meet ASTM D3951 requirements, but DLA’s Master List of Technical and Quality Requirements takes precedence, including prohibitions against intentional addition or direct contact with mercury or mercury-containing compounds, except in specific exempted applications such as batteries, fluorescent lights, sensors, and reagents approved by NAVSEA, with portable devices requiring shockproof design and secondary containment. The unit of issue is each, with a contracted quantity of one, to be delivered FOB destination within five days, with zero tolerance for quantity variance. Delivery is required to the USS RICHARD M MCCOOL JR LPD-29 in Pascagoula, Mississippi, and shipment must utilize the fastest traceable means, explicitly prohibiting parcel post. The supplier, GETINGE USA INC, must adhere to all DLA procurement directives, and the item must be labeled and palletized according to RP001 and applicable technical standards. The solicitation was issued under SPE2DH-26-T-5615 with a response deadline of August 5, 2026, and the original delivery requirement is set for July 31, 2026.
Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 423450
New
DIBBS
MASK, FACE, ASEPTIC
Solicitation # SPE2DH-26-T-5608
The contract specifies the procurement of 6 packages of sterile face masks made from polypropylene in blue color, with each package containing 50 units, for a total of 300 masks. The item is identified by part number 113-3008, manufactured by Patterson Dental Company with CAGE code 2V418, and carries the NSN 6532-01-346-0190. All packaging must comply with commercial standards as outlined in the procurement document, ensuring each unit is sealed in a protective container and packed in suitable exterior shipping containers capable of safe transport via common carrier at the lowest cost to the designated delivery point, Fort Bragg, NC. The masks must meet a bacterial filtration efficiency exceeding 95 percent and are regulated by the FDA, requiring referral through EBS for confirmation. Marking must adhere to Medical Marking Standard No. 1, superseding MIL-STD-129, and packaging must follow MIL-STD-2073-1E. Delivery is required within 20 days FOB destination, with no tolerance for quantity variance, and inspection and acceptance occur at the delivery point. The solicitation number is SPE2DH-26-T-5608, with a response deadline of August 5, 2026, and the contracting office is under the Department of Defense’s Medical Supply Chain FSH.
Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
CONTAINER, THERMAL, BLOO
Solicitation # SPE2DH-26-T-5619
The thermal blood transport container, identified by NSN 6530-01-654-0062, is designed to safely carry two units of whole blood under controlled temperatures, featuring an insulated inner box enclosed in a Multicam-colored nylon outer pouch with a carrier for secure attachment to personnel harnesses. This unit is sold individually and must meet all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date depending on the acquisition type. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed prior to return. The contract falls under NAICS code 339113 and is managed by the Department of Defense’s Medical Supply Chain FSH, with performance required in Williamsburg, Virginia. Bidders must clearly indicate the source and part number being offered. The solicitation was posted on July 29, 2026, with responses due by August 5, 2026, and delivery must be completed within five days of award.
Surgical Appliance and Supplies Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 331313
New
DIBBS
TRAY, INSTRUMENT
Solicitation # SPE2DH-26-T-5607
The contract pertains to the procurement of a lightweight compact Mayo tray, identified by NSN 6530-01-618-7704, with a required quantity of five units. The item is designed for use with the Allevac Mayo stand and must comply with all technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with applicable revisions governed by the solicitation or award date depending on the acquisition size. Bidders are required to specify the source and part number being supplied. The solicitation, issued under SPE2DH-26-T-5607, was posted on July 29, 2026, with responses due by August 5, 2026. Delivery must be completed within 20 days of award, and the place of performance is designated as APO with zip code 09094-3219. The NAICS code is 331313, and the purchasing agency is the Medical Supply Chain FSH under the Department of Defense. Primary point of contact for inquiries is Tina Vu, reachable via email and phone provided. The contract type is a federal solicitation with no set-aside designation, and all supplies must adhere to DLA packaging requirements and the removal of government identification from non-accepted items.
Alumina Refining and Primary Aluminum Production

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details