Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

BEAKER, LABORATORY

Active
SPE2DS-26-T-307BFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

A laboratory beaker made of borosilicate glass, designed as a Griffin type with a spout, is specified to hold exactly 100 milliliters with graduation intervals of 10 milliliters for precise measurement. The unit of issue is a package containing twelve beakers per pack, and bidders must clearly identify the source and part number of the product being offered. All units must be individually packaged in sealed containers that protect against breakage and damage, and these must be shipped in commercial exterior containers suitable for safe delivery by any carrier at the lowest possible rate to the designated delivery point. Compliance with Medical Marking Standard No. 1 is mandatory, replacing all prior references to MIL-STD-129, and bidders must ensure proper labeling as defined by this standard. The item is identified by NSN 6640-01-141-1222 with a single package quantity ordered under purchase request 7017720462, and delivery must be completed within twenty days of award. The acquisition falls under solicitation SPE2DS-26-T-307B, issued by the Department of Defense through the Medical Supply Chain MD Surg FSF, with responses due by August 10, 2026. The contract is subject to covered defense information requirements, and all packaging and marking must align with current federal medical logistics standards.

General Info

100ml borosilicate beakers, 12 per pack, NSN 6640-01-141-1222, Medical Marking Standard No. 1, deliver in 20 days.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSFView Agency

NAICS

333998 - All Other Miscellaneous General Purpose Machinery ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(1)

SPE2DS-26-T-307B.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
View Agency Profile
Office AddressUS
Contacts
Olusola Emmanuel
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BEAKER,LABORATORY
BEAKER, LABORATORY, GRIFFIN, GLASS<(>,<)>
BOROSILICATE, LOW FORM W/SPOUT<(>,<)>
TO CONTAIN, 100 ML, 12S
GRADUATION INTERVAL SHALL BE 10 ML.
.
UNIT OF ISSUE PACKAGE (12 EA/PG)
.
BIDDER: PLEASE SPECIFY SOURCE AND PART
NUMBER BEING SUPPLIED.
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
ADEQUATE DATA FOR THE NSN/Part Number: 6640-01-141-1222 Quantity: 1 PG Purchase Request: 7017720462QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333998
New
DIBBS
FILTER ELEMENT, FLUI
Solicitation # SPE7M1-26-T-249C
The contract is for the procurement of one fluid filter element with NSN 4330-01-534-4559 and part number 22201388 from CLARK EQUIPMENT CO, under solicitation SPE7M1-26-T-249C. Delivery is required within ten days to Fort Sill, Oklahoma, with FOB origin terms, and no variance in quantity is permitted. The item must be packaged in accordance with ASTM D3951, but all DLA Master List of Technical and Quality Requirements take precedence and must be followed, including labeling per MIL-STD-129 and palletization as specified in RP001. The unit of issue is each, and packaging must reflect the specified QUP. Shipment must be made by the fastest traceable means, excluding parcel post, to the designated military facility with detailed marking instructions and a unique tracking identifier. The required delivery date is July 30, 2026, and the contract references specific technical and quality standards incorporated by reference from the DLA Master List, which governs all performance and compliance criteria. All government-specific identifiers, codes, and contact details are included for internal processing and tracking purposes, and the point of contact for the acquisition is Michael Reese of the Department of Defense’s Maritime Supply Chain.
MARITIME SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333998
New
DIBBS
FILTER ELEMENT, FLUID
Solicitation # SPE7LX-26-U-9223
This contract is for the procurement of 724 fluid filter elements with NSN 4330015342361 and part number 19431541 under solicitation SPE7LX-26-U-9223, issued by the Department of Defense’s Strategic Acquisition Program Directorate. The requirement is a total small business set-aside under NAICS code 333998, with delivery due within 78 days from the award date and FOB origin terms. The entire quantity must be delivered in exact accordance with the specified 724 units, as zero variance is permitted. Packaging must comply with ASTM D3951 and MIL-STD-129 labeling standards, with palletization following DLA’s RP001 packaging requirements, and all technical and quality specifications referenced by R or I numbers from the DLA Master List take precedence over any other standard. The unit of issue is each, and all packaging must be properly marked and labeled for government identification as per contractual directives. Inspection and acceptance occur at destination. The contract stipulates that government identification must be removed from any non-accepted supplies, and the supplier must adhere strictly to DLA’s packaging and handling protocols. The point of contact for inquiries is Theodore Misiolek, with contact information provided. This solicitation, posted on August 4, 2026, with a response deadline of August 19, 2026, is managed through the DIBBS platform, and the DLA’s authoritative technical and quality requirements—effective as of the solicitation or award date depending on acquisition size—govern all aspects of compliance. The estimated quantity noted does not guarantee purchase by the IDC, but the awarded contract requires exact fulfillment of 724 units with no adjustment allowed. All deliverables must be presented in accordance with the specified unit of issue and packaging data QUP:001, fully aligned with DLA’s procurement directives.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 333998
New
DIBBS
RING, CONTROL, FLUID
Solicitation # SPE7M1-26-T-249B
The contract pertains to the procurement of a RING, CONTROL, FLUID with NSN 4330-01-470-6033 and part number 7527, manufactured by Better Engineering Manufacturing Inc, under solicitation SPE7M1-26-T-249B. A single unit is required to be delivered within 20 days FOB destination, with no tolerance for variance in quantity. Delivery must be made to USS NEW YORK LPD 21 at FPO AA 34092 using the fastest traceable means, explicitly prohibiting parcel post. Packaging must comply with MIL-STD-2073-1E and marking in accordance with MIL-STD-129, with no special marking required. Palletization follows DLA packaging requirements, and the unit of issue is each. The contract strictly prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for specific exempted applications such as batteries, fluorescent lights, sensors, controls, weapon systems, or reagents specified by NAVSEA; any portable fluorescent lamps or instruments containing mercury must be shockproof and include a secondary containment barrier per NAVSEA 5100-003D. Acceptance occurs at the destination point, and the original required delivery date is July 30, 2026. Technical and quality requirements referenced are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date or amendment date as applicable. The contracting officer is Michael Reese, reachable at michael.reese@dla.mil, and the solicitation was posted August 4, 2026, with a response deadline of August 17, 2026.
MARITIME SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333998
New
DIBBS
FILTER, FLUID
Solicitation # SPE7M1-26-T-248Z
The contract pertains to the procurement of two fluid filters identified by NSN 4330-01-497-0312 and part number 210757, supplied by SMATCO INDUSTRIES INC under solicitation SPE7M1-26-T-248Z. Delivery is required within 20 days FOB origin, with shipment to the Assault Craft Unit ACU 2 in Virginia Beach, Virginia, via the fastest traceable means—parcel post is prohibited. The items must comply with MIL-STD-2073-1E packaging standards, including specific preservation and wrapping methods, and marking must follow MIL-STD-129 with no special marking codes. Packaging must adhere to DLA’s procurement requirements, and palletization is mandatory. The contract strictly prohibits intentional addition of mercury or mercury-containing compounds in or near the supply, except for permitted functional uses in batteries, fluorescent lamps, instruments, sensors, weapon systems, or NAVSEA-specified reagents; where mercury is present, portable devices must be shockproof with a secondary containment barrier per NAVSEA 5100-003D. Inspection and acceptance occur at the destination, with zero tolerance for quantity variance. The required delivery date is July 30, 2026, and the supplier must reference the DLA Master List of Technical and Quality Requirements for all applicable R or I number specifications.
MARITIME SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333998
New
DIBBS
FILTER, FLUID
Solicitation # SPE7LX-26-U-9237
The solicitation seeks quotes for 1,727 fluid filters with NSN 2940015465058 under a potential Automated Indefinite Delivery Contract with a one-year term or until aggregate orders reach $350,000, whichever comes first. The guaranteed minimum order is 259 units, and approximately two orders are expected annually. Deliveries will be consolidated and shipped to various DLA depots across CONUS and OCONUS regions. Only approved sources—0SAT8 YM129150-35153 and 80LX1 129150-35153—are qualified to respond. This is a full and open competition restricted to SBA-certified Women-Owned Small Businesses (WOSB) under the FAR 19.15 program, with NAICS code 333998. Quotes must be submitted electronically via the SAM.gov portal before the deadline of August 19, 2026; hard copies are not accepted, and no technical specifications, plans, or drawings are available. All responsible WOSB suppliers may submit a quote if received on time. The point of contact for inquiries is listed as DibbsBSM@dla.mil through the DLA Land and Maritime office in Columbus, Ohio.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 333998
New
Federal
COUPLING ASSY, 1/4
Solicitation # N0010426QFC38
This contract involves the procurement of a 1/4 Inch Coupler Assembly designed for critical shipboard systems where failure could result in severe personnel injury, loss of life, or major equipment damage. The assembly is classified as Special Emphasis material (Level I, Scope of Certification) and must adhere to stringent material, manufacturing, and quality standards. The coupler includes non-metallic materials that require compliance with NAVSEA toxicity and flammability standards, and all materials and processes such as oxygen cleaning, welding, brazing, and thread inspection must follow detailed military and industry specifications. Thorough documentation, including certificates of compliance and certifications for chemical, mechanical, and non-destructive tests, is mandatory and must accompany shipments. The contract enforces tight traceability controls from raw materials through final assembly to ensure full conformance with approved specifications. Quality assurance requirements are extensive and include mandatory government quality system audits, source inspections, and strict control over subcontractors and government-furnished materials. Sampling plans for inspections follow prescribed standards with zero-defect criteria for lot acceptance. Engineering changes, waivers, or deviations require formal approvals, and all changes affecting product configuration must be documented and controlled. Packaging and marking must meet military standards, and deliveries are subject to acceptance only after certification data is reviewed and approved via the Wide Area Work Flow system. The contract also incorporates priority rating under the Defense Priorities and Allocations System for national defense and embodies emergency acquisition flexibility provisions. The overall intent is to assure the delivery of fully verified, high-reliability components essential to Navy ship safety and operational readiness.
Navsup Weapon Systems Support Mech

POSTED

about 8 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333998
New
Federal
LNB
Solicitation # SPRMM126QGF63
This contract concerns the procurement of an LNB under a fixed-price arrangement, issued in accordance with FAR Part 12 for commercial products and services, with the solicitation number SPRMM126QGF63 and a response deadline of August 19, 2026. The item must strictly conform to the specified CAGE code 4NN85 and part number TLNB7500X.0002, and must be marked in compliance with MIL-STD-130 Rev N. Any design, material, or part number changes require prior written approval from the NAVICP-MECH Contracting Officer, with substitutions classified under specific code designations detailing interchangeability and replacement criteria. The contractor is solely responsible for all inspection and quality assurance activities, maintaining complete records for 365 days after final delivery, and must ensure all supplies meet contract requirements regardless of explicit inspection clauses. Packaging must adhere to MIL-STD-2073 as referenced in the schedule, and if packaging occurs off-site, the facility’s address must be disclosed. Electronic submission via PIEE-WAWF is mandatory for invoices and receiving reports, and compliance with RFID requirements is contingent upon the Ship To code being listed under DFARS 252.211-7006, though no such locations are active at this time. Only authorized distributors of the original manufacturer are eligible for award, requiring proof of authorization submitted with the quote. Suppliers of surplus, new surplus, or new manufactured material must include a surplus certificate or their quote will be voided. All technical documents referenced are to be obtained through designated government sources such as DODSSP or NAVSUP-WSS, with special handling required for NOFORN and classified materials. The contractor must register with EDA on PIEE to access orders and modifications and provide a valid email for communications. Offer validity must extend at least 90 days, and the government considers contractual documents officially issued upon electronic or mailed delivery. The place of performance and inspection points are undefined in this document, leaving those details to be determined.
SPRMM1 DLA Mechanicsburg

POSTED

about 8 hours ago

DEADLINE

in 15 days
View Details
NAICS: 333998
New
Federal
CMIDS PLATE
Solicitation # N0038326QTB96
The contract pertains to the procurement of CMIDS PLATE under solicitation number N0038326QTB96, issued by the Naval Supply Systems Command Weapon Systems Support within the Department of Defense. The solicitation was posted on August 4, 2026, with a response deadline of September 3, 2026, and is classified under NAICS code 333998. The primary point of contact is Destiny N. Wiatr, reachable via email at Destiny.n.wiatr.civ@us.navy.mil and telephone at 215-697-3528, with the office located in Philadelphia, Pennsylvania. Contractual documents are considered officially issued upon electronic transmission, including email, fax, or mail, and government acceptance of the contractor’s proposal forms a binding agreement. Early and incremental deliveries are encouraged and preferred. The contract incorporates multiple mandatory federal clauses and compliance requirements, including the mandatory use of Workflow Pro (WFP) Mod Assist Module, adherence to Buy American and Free Trade Agreements, and certification for Balance of Payments Program compliance. Security prohibitions and exclusions, equal opportunity provisions for workers with disabilities, and specific naval directives regarding AbilityOne contractor information release are fully applicable. The contract also enforces Notice of Priority Rating for national defense and emergency preparedness purposes, and requires strict compliance with Item Unique Identification and Valuation standards effective January 2023. Payment instructions are linked to Wide Area Workflow, with invoice and receiving report details to be confirmed, and royalty information and annual representations are required per applicable deviations and amendments effective through 2026.
Navsup Weapon Systems Support

POSTED

about 8 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 333998
New
Federal
TRANSMITTER,PRESSURE
Solicitation # 70z08026QDE027
The U.S. Coast Guard Surface Forces Logistics Center is soliciting bids for 20 pressure transmitters, part number 0025353231, manufactured by Rolls-Royce Solutions GmbH, for use on 87 WPB vessels. The items must be sourced as brand name products, with no substitutions allowed unless they meet all salient physical, functional, and performance characteristics and are approved by the Coast Guard. Each transmitter must be individually packaged in compliance with MIL-STD-2073-1E Method 10 and marked according to MIL-STD-129R, using ISO/IEC-16388-2007 Code 39 symbology for barcoding; failure to comply will result in rejection and return of the shipment. The solicitation is issued under FAR Subpart 12.6 as a commercial item acquisition using simplified acquisition procedures, with award based on the lowest price technically acceptable model under a firm fixed price contract. Delivery is required to 2401 Hawkins Point Road, Baltimore, MD, 21226. Vendors must be registered in SAM, possess a valid DUNS number, provide their Tax Identification Number, and submit quotes via email to Eric.I.Goldstein@uscg.mil by August 11, 2026, at 9:00 AM Eastern Standard Time. All quotes must include a completed FAR 52.212-3 form and a disclosure regarding inverted domestic corporation status. The contract incorporates numerous FAR clauses related to ethics, labor standards, equal opportunity, anti-trafficking, Buy American, export controls, cybersecurity, and supply chain security. Of particular note, clauses prohibiting contracting with Kaspersky, ByteDance, and certain foreign entities, along with requirements for electronic funds transfer and compliance with human rights and labor protections, are binding. The set-aside designation is for total small business, and a HUBZone price evaluation preference applies. Vendors must explicitly confirm their ability to meet the mandatory packaging and marking requirements; standard commercial packaging is unacceptable. The NAICS code is 333998, and the small business size standard is 500 employees.
Sflc Procurement Branch 1(00080)

POSTED

about 8 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333998
New
Federal
LED
Solicitation # N0010426QAC68
The solicitation seeks 200 units of LED component with part number 7128207-16 under contract number N0010426QAC68, issued as a Total Small Business Set-Aside in accordance with FAR 19.5, ensuring only small business concerns are eligible to respond. The North American Industry Classification System code 334413 identifies the category as Light Emitting Diode manufacturing, aligning with the product specification. The U.S. Navy’s Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, Pennsylvania, is the issuing office, with Joshua Martin listed as the primary point of contact via email and phone for inquiries. Responses must be submitted by August 1, 2026, at 8:30 p.m. Eastern Time, and the opportunity is publicly accessible through the SAM.gov platform. The place of performance is unspecified, indicating potential flexibility in delivery location, though the contract is tied to Department of Defense funding and requirements.
Navsup Weapon Systems Support Mech

POSTED

about 8 hours ago

DEADLINE

in 17 days
View Details
NAICS: 333998
New
Federal
PIN,HINGE
Solicitation # N0038326QTB95
This contract is a solicitation issued by the Naval Supply Systems Command Weapon Systems Support under the Department of Defense, with solicitation number N0038326QTB95, posted on August 4, 2026, and a response deadline of September 3, 2026. The procurement seeks PIN and HINGE items under the NAICS code 333998 and is administered from Philadelphia, Pennsylvania. Contractual documents are deemed issued upon electronic transmission including email, and government acceptance of a proposal constitutes bilateral agreement. Early and incremental deliveries are encouraged. All contractual obligations are subject to mandatory federal requirements including the mandatory use of Workflow Pro’s Assist Module, compliance with Buy American and related trade agreements, security prohibitions, and equal opportunity standards for workers with disabilities. Payment must follow Wide Area Workflow instructions with invoice and receiving report procedures detailed in the schedule. The designated point of contact is Destiny N. Wiatr, reachable via email at Destiny.n.wiatr.civ@us.navy.mil and phone at 215-697-3528. Additional provisions include royalty information, national defense priority ratings, annual certifications, and the release of offeror information under Navy use of AbilityOne support contractor guidelines.
Navsup Weapon Systems Support

POSTED

about 8 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 333998
New
Federal
DRILLING X MILLING
Solicitation # N0010424QSC29
The contract pertains to the procurement of DRILLING X MILLING components under solicitation N0010424QSC29, with a response deadline of August 4, 2026, and is issued by the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, Pennsylvania. It mandates strict compliance with military standards including MIL-STD-130 Rev N for marking, MIL-STD-2073 for packaging, and detailed requirements for design changes, substitutions, and quality assurance. The contractor must ensure all items are sourced from an authorized distributor, with official documentation verifying manufacturer authorization required before award. Inspection and acceptance responsibilities lie with the contractor, though the government retains the right to conduct its own inspections at any time, and all records must be retained for 365 days after final delivery. The contract is firm-fixed-price with FOB Origin freight terms, and award requires bilateral acceptance. The solicitation includes a 100 percent, 365-day option period and is subject to Buy American provisions, annual certifications, and priority rating for national defense purposes. All deliveries must meet exact part number and Cage Code specifications—8275-006 under CAGE codes 1TC70 and 66200—and must conform to rigorous traceability protocols, including mandatory OEM authorization letters for non-manufacturers. Government source inspection is required, and the contract enforces strict adherence to data handling protocols under OPNAVINST 5510.1, including proper classification and distribution statements such as X-code for export-controlled technical data. Payment instructions and administrative details are managed through Wide Area Workflow with TBD identifiers pending final routing. The solicitation is for a direct buy with no multi-year or indefinite delivery vehicle structure, and all responses must verify nomenclature, part numbers, and NSNs prior to submission. Unauthorized substitutions or design changes are prohibited without written approval through a formal change order, and all submissions must be accompanied by required certifications affirming compliance with federal procurement policies and equal opportunity mandates.
Navsup Weapon Systems Support Mech

POSTED

about 8 hours ago

DEADLINE

in 25 minutes
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Same awarding agency

NAICS: 339113
New
DIBBS
APPLICATOR, DISPOSABLE
Solicitation # SPE2DS-26-T-305Y
The contract specifies the procurement of a disposable 6-inch wooden rod applicator, sterile and packaged two per packet with 100 packets per unit of issue, supplied by approved vendors including REDI PRODUCTS INC, MEDLINE INDUSTRIES, and McKesson Medical-Surgical. The item is regulated by the FDA and must be sourced only from approved manufacturers with specified part numbers. All packaging must comply with commercial standards and the Medical Marking Standard No. 1, replacing MIL-STD-129, with containers designed to prevent damage and ensure safe transport via common carriers at the lowest cost to the designated delivery point. The product must be free of intentional mercury or mercury compounds except in limited exempted uses, and portable devices containing mercury must meet Navy shockproof and secondary containment requirements. Delivery is required within 20 days FOB destination with zero tolerance for quantity variance, and inspection and acceptance occur at the delivery point. Packaging must adhere to MIL-STD-2073-1E, and all items must be properly marked in accordance with DLA’s medical marking guidelines. The solicitation is issued under contract SPE2DS-26-T-305Y with NSN 6515-00-564-8242, and bidders must clearly identify the company and part number being offered. The government requires confirmation of FDA-regulated status via EBS referral, and technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced in the document. This procurement is for a Fleet Prime Vendor item, and the unit of issue is a package (PG).
Surgical Appliance and Supplies Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
FLASHLIGHT, EYE EXAM
Solicitation # SPE2DS-26-T-306D
The contract is for the procurement of three disposable, self-contained eye examination flashlights with a blue spot beam, identified by NSN 6515-00-185-9482 and purchase request 7017744837, under solicitation SPE2DS-26-T-306D. The item is classified as a medical device regulated by the FDA, requiring verification by the contracting official through EBS referral with detailed manufacturer and bidder information. Each unit must be packaged in a sealed commercial container that protects against damage and must comply with Medical Marking Standard No. 1, which supersedes MIL-STD-129. Exterior shipping containers must ensure safe, cost-effective delivery via common carrier to the designated destination point. The device must be sourced with a specified manufacturer part number and supplier, and bidders must clearly state their source and part number in their submission. Delivery is required within 55 days of contract award, with a firm delivery date of August 4, 2026, and delivery terms are FOB destination. The units must be marked in accordance with Medical Marking Standard No. 1, and packaging must adhere to commercial standards as specified in the procurement document, not MIL-STD-2073-1E despite earlier references. The shipment is destined for APO AP 96260-5479 for U.S. medical material center purposes, with a secondary freight address at Camp Carroll, Korea. The unit of issue is each (EA), quantity is fixed at three with zero variance allowed, and the unit price is $3.00 for a total contract value of $9.00. All technical and quality requirements are drawn from the DLA Master List of Technical and Quality Requirements, and packaging, marking, and delivery procedures are strictly governed by DLA’s medical logistics directives.
Surgical and Medical Instrument Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
SUPPORT, BOW
Solicitation # SPE2DS-26-T-306E
The contract specifies the procurement of two aluminum bow supports, each 12 inches nominal in size, designed for use with finger traps and identified by NSN 6515-01-490-5116. These items are intended for medical applications and must comply with all associated technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, with applicable references marked by R or I numbers. Packaging and marking must adhere to Medical Marking Standard No. 1, which replaces MIL-STD-129, and each unit must be sealed in a suitable container to prevent damage, with exterior shipping containers meeting commercial standards for safe and cost-effective delivery via common carrier to the designated point of performance in APO, ZIP 96260-5479. The unit of issue is each, and bidders are required to clearly indicate the source and part number being offered. All provisions are governed by the Federal Acquisition Regulation and the DLA Packaging Requirements, and the item must be delivered within 84 days of award. The solicitation, issued under SPE2DS-26-T-306E, was posted on August 4, 2026, with responses due by August 10, 2026, under NAICS code 339112 for medical device manufacturing, and is managed by the Department of Defense’s Medical Supply Chain.
Surgical and Medical Instrument Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334511
New
DIBBS
CABLE, INVASIVE BLOOD P
Solicitation # SPE2DS-26-T-306F
The contract is for a right-angle invasive blood pressure transducer cable with an Edwards connector, intended for use with oval transducers, and is classified under the NSN 6515-01-615-0921. The unit of issue is each, with a quantity of three units required at a unit price of $3.00, totaling $9.00. Delivery is set for 84 days after award, with delivery terms FOB destination, and no variance is permitted in quantity. Inspection and acceptance occur at the destination point. The item is regulated by the FDA, requiring referral to a product specialist in EBS with full bidder and manufacturer details including part numbers. Packaging must comply with the Medical Marking Standard No. 1, which supersedes MIL-STD-129, and each unit must be sealed in commercial-grade containment to prevent damage, with outer shipping containers ensuring safe, low-cost transport to the delivery point. The packaging and marking instructions must strictly adhere to the specified commercial standards outlined in SPE2DS-26-T-306F, and the material is subject to defense information coverage under RD003. The contract references DLA’s technical and quality requirements identified by R and I numbers and mandates that bidders explicitly state the source and part number of the supplied item. The delivery address is APO AE 09227-0000, with freight shipping directed to Kaiserslautern, Germany, and the original required delivery date is August 4, 2026.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
FORCEPS, INTESTINAL
Solicitation # SPE2DS-26-T-306S
The item is a Meeker intestinal forceps with an overall nominal length of 10.75 inches and a right-angle design, intended for surgical use in intestinal procedures. It is identified by NSN 6515-01-499-5074 and sold in units of one each, with a single unit ordered under purchase request 7017314307. Delivery is required within 20 days after order award. The solicitation, numbered SPE2DS-26-T-306S, was posted on August 4, 2026, with responses due by August 10, 2026, and falls under NAICS code 339112 for surgical and medical instrument manufacturing. The contract is issued by the Department of Defense through the Medical Supply Chain MD Surg FSF, with performance to occur in Hampton, Virginia. The technical specifications are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, and must comply with the revision in effect on the solicitation or award date depending on acquisition size. Packaging must adhere to DLA standards, and any non-accepted supplies must have government identification removed prior to return. Bidders are required to clearly state the source and part number being offered. Additionally, the contract is subject to Covered Defense Information requirements, indicating that the item may involve sensitive or controlled data under federal procurement protocols.
Surgical and Medical Instrument Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
SKIN CLOSURE, ADHESI
Solicitation # SPE2DS-26-T-306Y
The contract specifies the procurement of sterile adhesive skin closures in the form of Steri-Strip wound closure strips measuring 0.25 inches by 3 inches, with a total quantity of 150 strips per package. The strips are supplied in fifty sealed plastic envelopes, each containing three strips, and are available in two alternate backings: polypropylene film and nonwoven nylon fabric, both porous. The product must have a shelf life of 36 months, with no more than five months elapsed between the manufacturer’s date and delivery to the government. Labeling must include the date of manufacture, expiration or retest date, contract number, and lot number, all in compliance with the latest revision of Medical Marking Standard No. 1, which replaces MIL-STD-129. Packaging must meet commercial standards, with each unit sealed in a protective container and shipped in suitable exterior packaging to ensure safe delivery at the lowest carrier rate to the specified point of delivery in Hurlburt Field, Florida. The item is identified by NSN 6510-00-913-5874 and is classified as a Type I (Code Q) shelf-life item with a non-extendable 36-month expiration. All technical and quality requirements are governed by the DLA Master List, and bidders must provide the source and part number being offered. The solicitation, issued under SPE2DS-26-T-306Y, requires bids to be submitted by August 10, 2026, with delivery expected within 20 days of award.
Surgical Appliance and Supplies Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 6 days
View Details
NAICS: 325611
New
DIBBS
SANITIZER, HAND
Solicitation # SPE2DS-26-T-305X
The contract is for a hand sanitizer classified as a waterless cleanser with an alcohol base containing 70% ethyl alcohol, unscented, and packaged in 4 fluid ounce bottles. Each unit of issue is a package containing 24 bottles, and the total order consists of two such packages. The item must have a mandatory 36-month shelf life that is non-extendable, and no more than five months may have passed from the date of manufacture to the date of delivery to the government. Packaging must comply with DLA packaging requirements, and the product must meet all technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements. Government identification must be removed from any non-accepted supplies. The item is identified by NSN 8520-01-346-9200, with a delivery deadline of 20 days after contract award. The solicitation was issued under SPE2DS-26-T-305X, with a response deadline of August 10, 2026, and is managed by the Department of Defense’s Medical Supply Chain under the office in San Antonio, Texas. Primary point of contact is Mary-Kathryn Donahue, reachable via email and phone provided.
Soap and Other Detergent Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 6 days
View Details
NAICS: 327992
New
DIBBS
MEDICAL SUPPLY SET, OBS
Solicitation # SPE2DS-26-T-306G
The contract specifies the procurement of three Medical Supply Sets for Obstetrical Field Use, each containing a complete sterile kit designed for emergency obstetrical care. Each set includes sterile exam gloves, an obstetrical napkin, antiseptic towelettes, umbilical cord clamps, a disposable scalpel, a plastic apron, a 17x24 inch plastic-lined underpad, two 13x19 inch disposable towels, a 40x48 inch drape sheet, a plastic placenta bag, two plastic twist ties, a 2-ounce bulb syringe, four sterile 4x4 inch gauze sponges, a sterile foil baby bunting, and a newborn diaper, all packed in an OB box. The items are regulated by the FDA and must be supplied with full source and part number disclosure. Packaging and labeling must comply strictly with DLA’s Medical Marking Standard No. 1, superseding MIL-STD-129, and adhere to DLA packaging requirements RP001. Units must be individually sealed and shipped in commercial outer containers suitable for safe transit by common carrier under the lowest cost terms, with no parcel post permitted. Delivery is FOB destination with zero tolerance for quantity variance and a required delivery date of August 6, 2026. Two sets are destined for USS Ronald Reagan, and one for USS Zumwalt, with shipments required to be made via traceable means using DLA’s VSM system and RDD 777 protocol. All technical and quality requirements from the DLA Master List take precedence over commercial standards like ASTM D3951, and suppliers must confirm FDA compliance through EBS referral prior to award.
Ground or Treated Mineral and Earth Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 6 days
View Details
NAICS: 336413
New
DIBBS
DRY FIRE MAGAZINE, P
Solicitation # SPE2DS-26-T-306A
The dry fire magazine is a non-functional training aid designed exclusively for resetting the trigger assembly of a 9mm pistol during marksmanship drills. It has precise dimensional requirements: length between 5.05 and 5.07 inches, height between 1.56 and 1.58 inches, width between 1.19 and 1.21 inches, and a cubic measure of 9.53 cubic inches. It is incapable of holding any ammunition and serves solely as a mechanical training device to simulate magazine insertion and trigger manipulation without live rounds. The unit of issue is each, and the item is identified by NSN 6910-01-708-4254 with a procurement quantity of 20 units. This acquisition is governed by DLA packaging and technical requirements referenced in the DLA Master List of Technical and Quality Requirements, with compliance determined by the version in effect on the solicitation or award date. Removal of government identification from non-accepted supplies is mandated under RQ011. The contract solicitation, numbered SPE2DS-26-T-306A, was posted on August 4, 2026, with responses due by August 10, 2026. The procurement falls under NAICS code 336413 and is managed by the Department of Defense’s Medical Supply Chain MD Surg FSF. Delivery is required within 20 days of award, and performance is specified to occur at FPO, ZIP 96673. The primary point of contact for inquiries is Tiffany Parker, reachable via email and phone provided.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
TUBING, TRANSDUCER
Solicitation # SPE2DS-26-T-306K
The item is a disposable A-line transducer tubing, 60 inches in length, designed for use with A-line transducers and equipped with a squeeze flush device. It is packaged in units of 20 each, identified by NSN 6515-01-500-7556, and must meet a strict shelf-life requirement of 36 months from the date of manufacture, with no more than five months elapsed between manufacturing and delivery to the government. The product is subject to DLA packaging standards and incorporates technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements. Removal of government identification from non-accepted supplies is prohibited. The solicitation, issued under SPE2DS-26-T-306K, is for a single packaging unit with a delivery deadline of 20 days after award, and performance is required at Fort Bliss, Texas. The contract is managed by the Department of Defense’s Medical Supply Chain under the NAICS code 339112, with Vernon Stevenson listed as the primary point of contact.
Surgical and Medical Instrument Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
ELECTRODE, ELECTROCARDI
Solicitation # SPE2DS-26-T-306U
The contract specifies the procurement of eight units of electrocardiograph electrodes designed exclusively for use with the Cardiac Science Powerheart G5 automatic and semi-automatic AEDs. Each unit must be properly sealed in a protective container to prevent damage and packaged in commercial shipping containers suitable for safe delivery via common carriers at the lowest possible rate to the designated delivery point in San Diego, California. The materials must comply with Medical Marking Standard No. 1, which replaces all references to MIL-STD-129, and all packaging and labeling requirements are governed by DLA Packaging Requirements for Procurement and other technical and quality standards referenced in the DLA Master List. Each unit must have a minimum shelf life of 24 months, with no more than three months having elapsed from the date of manufacture to the date of government delivery. Labels on each unit must include the NSN 6515-01-652-8523, manufacturer name and CAGE code, manufacturer date, expiration or retest date, and the contract number or lot number. All supplies are subject to removal of government identification if not accepted, and the solicitation is governed by the revision of the DLA Master List effective on the solicitation issue date. The contract, awarded under solicitation SPE2DS-26-T-306U, has a response deadline of August 10, 2026, and requires delivery within 20 days after order placement.
Surgical Appliance and Supplies Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334511
New
DIBBS
CATHETERIZATION KIT, UR
Solicitation # SPE2DS-26-T-305W
The contract specifies the procurement of a urethral catheterization kit, designated as a 16FR Foley catheter with a 2000 mL anti-reflux valve bag, packaged in units of 10 per pack (PG). Each kit includes sterile drapes, underpads, specimen containers, five prep balls, povidone-iodine solution, gloves, prefilled syringes with 10 CC sterile water and lubricant, and forceps. The product must have a 36-month shelf life, with no more than five months elapsed from manufacture to government delivery. Packaging must comply with DLA Packaging Requirements, Medical Marking Standard No. 1, and ASTM D3951, with labeling requirements including NSN, manufacturer and CAGE code, manufacture and expiration dates, contract and lot numbers. The item is regulated by the FDA and requires referral via EBS for confirmation. Two delivery locations are specified: USS ZUMWALT DDG 1000 in FPO AP and Fort Campbell, KY, with shipments prohibited from using parcel post and requiring traceable means. Delivery is due within 20 days from order with zero quantity variance permitted. The unit of issue is PG, and the NSN is 6515016152124. Manufacturer part numbers 899616 from Cardinal Health 200, LLC and C. R. Bard, Inc. are accepted. Palletization and marking must adhere strictly to DLA standards, and all packaging documentation must supersede any conflicting requirements.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 6 days
View Details