BEARING, STAVE SHAPE

BEARING,STAVE SHAPE
STAVE, BEARING. CLASS 3, SIZE NO. 9, 1/16 IN. OVERSIZE, 30 IN. LONG,
PACKED 1 STAVE PER BOX, MIL SPEC TITLED: "BEARING COMPONENTS, BONDED
SYNTHETIC RUBBER, WATER LUBRICATED."
E/I AFT STERN TUBE BEARING ASSY.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
FULL AND OPEN COMPETITION APPLY
INCLUDE CS046 OBJECT TEXT ID ST
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
INCLUDE CSS01 OBJECT TEXT ID ST
INCLUDE CST01 OBJECT TEXT ID ST
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RS039: Shelf-life requirement RS001 for a TYPE I (CODE Y) item with a shelf life of 180 months (non-extendable) applies to this item.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
SPE7M0-26-T-8821
SECTION B
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
IAW BASIC SPEC NR MIL-DTL-17901C NOT 2
REVISION NR C DTD 02/06/2023
PART PIECE NUMBER: CLSAS 3 SIZE 9
IAW REFERENCE STD NR MIL-STD-129R(3)
REVISION NR R DTD 02/25/2023
PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017009273 0001 EA 24.000
NSN/MATERIAL:2010012099650
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:D3 OPI:M
PACK CODE:Q PACKING LEVEL: B
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING
SPE7M0-26-T-8821
SECTION B
PR: 7017009273 PRLI: 0001 CONT’D
REQUIREMENTS FOR PROCUREMENT
PRESERVATION AND PACKING OF (RUBBER) BEARING
STAVES REVISION A DATED 00279
.
SCOPE: THIS SPECIAL PACKAGING INSTRUCTION
DETAILS THE PROCEDURE FOR CLEANING,PRESERVATION
PACKAGING, AND PACKING OF (RUBBER) BEARING
STAVES INDENTIFIED UNDER MIL-DTL-2845E.
.
1. QUANITY UNIT PACK (QUP): ITEM IS CONSIDERED
TO BE A REPAIR PART AND SHALL BE PACKAGED ONE
PART PER UNIT PACKAGE, EXCEPT ALL THE PARTS
COMPRISING A SINGLE SET, ASSEMBLY, BOX, OR
MULTIPLE QUP SHALL BE PACKAGED TOGETHER.
UNIT OF ISSUE OR MULTIPLE QUPS SHALL DETERMINE
IF THE ITEM SHALL BE PACKAGED UNDER THE
PACKAGING REQUIREMENTS SPECIFICALLY DESIGNATED
FOR SETS, ASSEMBLIES, BOXES, OR MULTIPLE QUPS.
.
2. METHOD OF PRESERVATION: THE METHOD OF
PRESERVATION UTILIZED FOR ALL LAMINATED PHENOLIC
OR RUBBER, BRASS BACKED BEARING STAVES SHALL BE
METHOD "10" (PHYSICAL AND MECHANICAL PROTECTION)
I/A/W WITH MIL-STD-2073 (LATEST REVISION).
.
3. CLEANING: EACH ITEM SHALL BE CLEANED AND
DRIED BY ANY SUITABLE PROCESS OR PROCESSES,
WHICH ARE NOT INJURIOUS TO THE ITEM.
.
4. PRESERVATIVE MATERIAL: NO PRESERVATIVE
REQUIRED.
5. WRAPPING: TO PROTECT ITEMS FROM DIRECT
EXPOSURE TO SUNLIGHT AS SPECIFIED MIL-DTL-2845E,
TABLE I, NOTE 1-EACH ITEM SHALL BE INDIVIDUALLY
COVERED WITH AN OPAQUE OR KRAFT WRAPPING PAPER
IN ACCORDANCE WITH A-A-203, TYPE AND STYLE ARE
OPTIONAL. WRAPPING MATERIAL SHALL SNUGGLY
ENCLOSE THE ITEM AND BE SECURED WITH TAPE TO
PREVENT UNINTENTIONAL UNWRAPPING.
UNDER NO CIRCUMSTANCES SHALL ANY TAPE BE APPLIED
TO THE BARE ITEM. (SEE SPECIAL NOTE 11(A) FOR
SETS, ASSEMBLIES, BOXES, OR MULTIPLE QUANTITY
UNIT PACKS).
.
6. CUSHIONING: (FOR SETS, ASSEMBLIES, BOXES OR
MULTIPLE QUPS ONLY):
ITEMS SHALL BE CUSHIONED TO PREVENT DAMAGE.
CUSHIONING MATERIAL USED WITHIN THE UNIT PACK
SHALL CONFORM TO ANY OF, COMBINATION OF, THE
FOLLOWING SPECIFICATIONS, AT THE CONTRACTOR'S
OPTION, WHICH WILL PROVIDE THE REQUIRED
PROTECTION (SEE SPECIAL NOTE 11(A) FOR SETS,
ASSEMBLIES, BOXES, OR MULTIPLE QUPS):
.
A. A-A-1898 (CELLULOSIC)
B.PPP-C-1120, CLASS A, GRADE 1, TYPE OPTIONAL
(BOUND FIBER)
C. A-A-203 (PAPER, KRAFT, UNTREATED)
D. MIL-B-3106 (BOARD, COMPOSTION,
WATER-RESISTANT, SOLID)
E. MIL-R-5001, GRADE A, TYPE AND CLASS OPTIONAL
(RUBBER, LATEX FOAM)
F. MIL-R-6130, GRADE A (RUBBER, CELLULAR)
G. MIL-R-20092, CLASS 5 (RUBBER SHEETS AND
ASSEMBLED AND MOLDED SHAPES, CELLULAR,
SYNTHETIC, OPEN CELL)
SPE7M0-26-T-8821
SECTION B
PR: 7017009273 PRLI: 0001 CONT’D
7. UNIT CONTAINERS:
A. FOR UNIT OF ISSUE OF "EA" (EACH):
(1) AFTER ITEM IS INDIVIDUALLY WRAPPED IN
ACCORDANCE WITH STEP 5, EACH ITEM SHALL BE
PLACED IN AN ASTM D5118, TYPE CF, CLASS
WEATHER-RESISTANT SINGLEWALL FIBERBOARD
CONTAINER, PREFERABLY A REGULAR SLOTTED
CONTAINER (RSC) END-LOADING. SELECTION OF
CONTAINER (W5C, W6C, OR V3C) SHALL BE IN
ACCORDANCE WITH SIZE AND WEIGHT LIMITATIONS OF
ASTM D5118.
.
(2) MANUFACTURER'S JOINT AND FLAPS SHALL BE
GLUED. STAPLES ARE NOT AN ACCEPTABLE MEANS OF
CLOSURE FOR THIS ITEM, SINCE STAPLES OR METALS
FASTENERS MAY CAUSE DAMAGE TO THE ITEM.
.
(3) CORRUGATED FIBERBOARD LINERS MAY BE UTILIZED
TO PROVIDE ADDITIONAL SUPPORT TO CARTON FOR
INCREASED STACKING STRENGTH. WHEN UTILIZING
LINERS, THE FLUTES SHALL RUN PERPENDICULAR TO
THE TOP OF THE BOX TO DISTRIBUTE THE WEIGHT
ALONG THE CARTON.
.
B. FOR UNIT OF ISSUE OF "SE" "AY" OR "BX" (SET,
ASSEMBLY, BOX) OR MULTIPLE QUPS:
.
(1) AFTER EACH ITEM OF THE SET, ASSEMBLY, BOX,
OR MULTIPLE QUP IS WRAPPED AND CUSHIONED IN
IN ACCORDANCE WITH STEPS 5 AND 6, THE ITEMS
SHALL BE PLACED TOGETHER IN ONE OF THE UNIT
CONTAINERS SPECIFIED BELOW (SELECTION OF
CONTAINER SHALL BE IN ACCORDANCE WITH
SIZE AND WEIGHT LIMITATIONS OF SPECIFICATION):
(A) ASTM D5118, TYPE CF, CLASS WEATHER-RESISTANT
DOUBLEWALL CORRUGATED FIBERBOARD BOX (W5C, W6C,
OR V3C);
(B) FOR SETS, ASSEMBLIES, BOXES, OR MULTIPLE
QUPS WEIGHING MORE THAN 60 POUNDS, THE UNIT
CONTAINER SHALL BE THE SAME AS THE SHIPPING
CONTAINER AS CITED IN STEP 10.
FIBERBOARD CONTAINERS:
(2) THE MANUFACTURER'S JOINT AND FLAPS SHALL BE
GLUED. STAPLES ARE NOT AN ACCEPTABLE MEANS OF
CLOSURE FOR THIS ITEM, SINCE STAPLES OR
METALS FASTENERS MAY CAUSE DAMAGE TO ITEM.
(3) CORRUGATED FIBERBOARD LINERS MAY BE UTILIZED
TO PROVIDE ADDITIONAL SUPPORT TO CARTON FOR
INCREASED STACKING STRENGTH. WHEN UTILIZING
LINERS, THE FLUTES SHALL RUN PERPENDICULAR TO
THE TOP OF THE BOX TO DISTRIBUTE THE WEIGHT
ALONG THE CARTON.
.
8. MARKING: MARKING SHALL BE IN ACCORDANCE WITH
MIL-STD-129 (LATEST REVISION).
ALL UNIT CONTAINERS SHALL BE MARKED WITH SPECIAL
MARKING CODE 20-"DO NOT BEND." WHEN APPLICABLE,
SHELF LIFE MARKINGS SHALL BE APPLIED TO THE UNIT
CONTAINER (I.E. TYPE I OR TYPE II).
.
9. PACK/PACKING LEVEL: THE PACK AND PACKING
LEVELS SHALL BE AS SPECIFIED IN THE CONTRACTUAL
AGREEMENT AND IN ACCORDANCE WITH STEP 10.
10. SHIPPING CONTAINERS: ALL PACKAGED RUBBER
BEARING STAVES SHALL BE OVERPACKED IN WOODEN
BOX TO ENSURE ITEM IS NOT DAMAGED DURING
SHIPPING, STORAGE, AND HANDELING. ACCEPTABLE
CONTAINERS ARE AS FOLLOWS:
SPE7M0-26-T-8821
SECTION B
PR: 7017009273 PRLI: 0001 CONT’D
(A) PPP-B-621, NAILED WOOD BOX, OVERSEAS TYPE;
(B) PPP-P-601, CLEATED PLYWOOD BOX, OVERSEAS
OVERSEAS TYPE.
QUANTITY OF UNIT PACKAGES IN A SHIPPING
CONTAINER SHALL BE AT CONTRACTOR'S DISCRETION.
HOWEVER, STACKING OF CONTAINERS SHALL NOT
EXCEED THE FIBERBOARD CONTAINER'S PERFORMANCE
CAPABILITIES TO ENSURE PRODUCT QUALITY
THROUGHOUT THE DISTRIBUTION CYCLE.
.
11. SPECIAL NOTES:
(A) WHEN THE UNIT IS PACKAGED AS A SET,
ASSEMBLY, BOX, OR QUP GREATER THAN ONE, EACH
ITEM SHALL BE WRAPPED AND CUSHIONED TO PREVENT
DIRECT SURFACE CONTACT WITH THE SURFACE OF THE
ADJACENT PARTS.
(B) UNDER NO CIRCUMSTANCES SHALL ANY
MIL-STD-129 MARKINGS/LABELS BE APPLIED TO THE
BARE ITEM.
(C) BULK PACKAGING IS NOT ACCEPTABLE. THIS
PACKAGING TECHNIQUE CREATES A PERMANENT
DEFORMATION TO THE ITEM.
(D) METAL STRAPPING SHALL NOT BE APPLIED
DIRECTLY TO BEARING STAVES, SINCE IT CREATES
PRODUCT DEFORMATION.
(E) TO REDUCE TARE AND CUBE, EXCESSIVE USE OF
CUSHIONING WITHIN THE UNIT CONTAINER SHALL BE
AVOIDED.
FREIGHT FORWARDER:
PEG00L
AMENTUM WAREHOUSE
5160 LAD LAND DRIVE
FREDERICKSBURG, VA 22407
US
FREIGHT SHIPPING ADDRESS:
PEGA00
EGYPTIAN NAVY
ARMAMENT DEPARTMENT
RAS EL TIN ALEXANDRIA
ALEXANDRIA
EG
MARKFOR
PEGA00
EGYPTIAN NAVY
ARMAMENT DEPARTMENT
RAS EL TIN ALEXANDRIA
ALEXANDRIA
EG
M/F: (TCN) PEGA5N52216991
RDD:
PROJ: TP 1
SUPP ADD: PALGKB SIG: L
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A01 DIST: F9B ADV: 2L FC: 48
SPE7M0-26-T-8821
SECTION B
PR: 7017009273 PRLI: 0001 CONT’D
Need Ship Date:00/00/0000 Original Required Delivery Date:06/04/2026
SPE7M0-26-T-8821 NSN/Part Number: 2010-01-209-9650 Quantity: 24 EA Purchase Request: 7017009273QTY: 24 Delivery: 5 days ADO