Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

BEARING UNIT, PLAIN

Awarded
SPE4A6-25-T-37DFFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

A.G.H. INDUSTRIES, LLC, with CAGE code 50888, was awarded contract SPE4A626P8379 by the Defense Logistics Agency on July 17, 2026, for a total value of $51,424.56 under solicitation SPE4A6-25-T-37DF. The contract involves the supply of a Plain Bearing Unit (NSN 3130014356142) and a Government First Article Test (NSN 0001S00000052), with performance taking place at the contractor’s facility in Euless, Texas. The award is presumed to be firm-fixed-price based on standard DLA procurement practices, though the contract type is not explicitly stated. No quantities, unit prices, or delivery schedules are detailed in the available documentation, and FOB terms are unspecified. The contract incorporates FAR 52.222-90, Addressing DEI Discrimination by Federal Contractors, implemented via modification P00001 under Deviation 2026-00040, Revision 1, which requires the contractor to prohibit racially discriminatory DEI practices in employment and contracting, report any subcontractor violations, and flow the clause down to all U.S.-based subcontracts. The contractor must also notify the Contracting Officer of any legal challenges to this clause. Compliance with applicable defense standards is assumed, though no specific MIL-SPEC, ASME, or ASTM references are provided. A Government First Article Test is required, but inspection location, acceptance criteria, and quality standards are not explicitly defined. No Contracting Officer’s Representative or Technical Representative is identified, and payment office details are incomplete, though the administering office is DLA Aviation, ASC Commodities Division in Richmond, Virginia, with Dean Allen listed as the Contracting Officer and CARL.ALLEN@DLA.MIL as the point of contact. No socioeconomic certifications, size status, or unique entity identifier details are provided, and no attachments, evaluation factors, or invoicing methods are documented. All additional requirements, including packaging, marking, and detailed technical specifications, are presumed to reside on an unretrieved continuation sheet referenced in the modification documentation.

General Info

A.G.H. INDUSTRIES, LLC to deliver plain bearing unit and first article test for $51,424.56 under DLA contract.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

Contract Value

$51,424.56

NAICS

332991 - Ball and Roller Bearing ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Awardee

A.G.H. Industries, LLCView Profile

Award Issued Date

Documents

(1)

SPE4A626P8379_P00001.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseAwarded
Posted

Combined Synopsis

Awarded

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Defense Logistics Agency
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → Defense Logistics Agency
View Agency Profile
Office AddressUS
Contacts

Full Description

Show more
DLA award SPE4A626P8379 posted on DIBBS. Awardee: A.G.H. INDUSTRIES, LLC (CAGE 50888) Total Contract Price: $51,424.56 Award Date: 07-17-2026 Solicitation: SPE4A6-25-T-37DF Line items: - BEARING UNIT, PLAIN (NSN/Part 3130014356142, PR 7013062479) - GOVERNMENT FIRST ARTICLE TEST (NSN/Part 0001S00000052)

Similar Contracts

Same NAICS industry code

NAICS: 332991
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPE4A6-26-T-14RQ
The contract pertains to the procurement of a Bushing, Sleeve with NSN 3120-00-287-7948 and part number NAS73-3-007, requiring a quantity of 400 units delivered in single pieces. The item is classified as a critical application item and must comply with technical and quality requirements specified in the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with revisions tied to the solicitation or award date depending on acquisition size. Manufacturing may involve casting or forging, and suppliers are directed to submit a Casting and Forging Assistance Request if tooling or specialized materials are needed. Inspection and acceptance are to occur at origin using MIL-STD-1916 or ASQ H1331 zero-based sampling, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Unspecified attributes are treated as major unless otherwise defined. The item must be physically marked per RQ017 with no unique identification required under DFARS 252.211-7003(c)(1)(i). Packaging must conform to MIL-STD-2073-1E and DLA Packaging Requirements, with marking in accordance with MIL-STD-129 and no special marking codes applied. Palletization and unit packaging follow DLA-specific codes, and the item is to be delivered FOB origin within 187 days of contract award, with a need ship date of February 22, 2027 and original delivery date of August 8, 2027. No quantity variance is permitted. Delivery is directed to DLA Distribution Cherry Point, with transportation procedures governed by DLAD Proc Notes C19 and C20.
ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BEARING, SLEEVE
Solicitation # SPE4A6-26-T-14RS
This contract pertains to the procurement of a sleeve bearing identified by NSN 3120-00-352-0547, with a requirement for 72 units to be delivered within 197 days FOB origin. The item is classified as a commercial item and is subject to stringent quality controls as it is listed on the Performance Review Institute’s Qualified Manufacturers List (QML) and Qualified Products List (QPL), meaning only accredited manufacturers or assemblers from these lists may supply the component. All supplied parts must comply with the AS81934C standard and its referenced technical documentation, and must meet specified verification levels with zero non-conformances required in sampling under MIL-STD-1916 or equivalent zero-based plans. The item is designated as critical application and requires adherence to specific inspection and acceptance protocols at origin, including physical marking per MIL-STD-129 and packaging in accordance with MIL-STD-2073-1E and DLA packaging requirements. Mercury and mercury-containing compounds are strictly prohibited in the product, preservation, packaging, or marking unless explicitly exempted for functional components like sensors or batteries, and even then, secondary containment is mandated. Tooling for casting or forging may be needed, and the government does not provide it; sourcing assistance must be requested through designated DLA channels. The contract enforces full compliance with DLA’s Master List of Technical and Quality Requirements, and the offeror explicitly agrees to source only qualified components from approved QML/QPL sources. Delivery is to DLA Distribution Warner Robins, Georgia, with a required ship date of March 4, 2027, and the purchase price is set at $72.00 per unit.
ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPE4A6-26-T-14TK
The contract specifies the procurement of 70 units of a BUSHING,SLEEVE with NSN 3120-01-170-6979 and part number 7-311511202-21 for The Boeing Company under solicitation SPE4A6-26-T-14TK. The item is classified as a critical application component and must comply with stringent technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with no special marking required, and palletization must follow DLA’s packaging requirements. Delivery is FOB origin, inspection and acceptance occur at the destination, with zero tolerance for quantity variance. The delivery window is 255 days from the contract award, with a required ship date of May 1, 2027. The item is to be shipped to DLA Distribution in Corpus Christi, Texas, using the designated freight address and contact information. All measuring and test equipment used in manufacturing must meet specified standards, and non-accepted supplies must have government identification removed. The unit of issue is each, priced at $70 per unit, totaling $4,900. The solicitation was posted August 10, 2026, with responses due by August 18, 2026, under NAICS code 332991 for other fabricated metal product manufacturing, and is managed by the Department of Defense’s ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
Federal
BEARING,SLEEVE
Solicitation # N0010426QFG51
This contract pertains to the procurement of a Bearing Sleeve designated as SPECIAL EMPHASIS Level I material, intended for use in a critical shipboard system where failure could result in catastrophic consequences including loss of life or the vessel itself. The item must be manufactured strictly in accordance with NAVSEA drawing 4558796 and conform to a comprehensive set of quality and traceability requirements, including adherence to ISO-9001, ISO-10012, ISO/IEC 17025, and MIL-STD-792, with MIL-I-45208 and MIL-STD-45662 as acceptable alternatives. All materials must be mercury-free, and configuration control is rigorously enforced through Engineering Change Proposals (ECPs) for any modifications to form, fit, function, or interface. Waivers and deviations must be formally requested, classified as Critical, Major, or Minor, and approved by the Contracting Officer, with full documentation forwarded to the Government Quality Assurance Representative. The contract mandates 100% inspection of all Objective Quality Evidence (OQE) and certification documentation, with zero defects accepted per lot under ANSI/ASQ-Z1.4 sampling standards, and full traceability from raw material through every manufacturing step to final delivery. Traceability markings must be permanently affixed or preserved via controlled tagging systems, and all subcontractors must comply with the same quality and inspection standards. A mandatory Certificate of Compliance must accompany each shipment, containing detailed information including contract number, NSN, lubricant usage, cure dates, HM&E test results, and an explicit statement of full compliance signed by authorized personnel. Delivery is subject to prior review and acceptance by Portsmouth Naval Shipyard via WAWF, with certification data submitted 20 days before shipment and final delivery scheduled for 200 days after award. The material must be packaged per MIL-STD 2073, and Government Source Inspection is required at the contractor’s facility, with the contractor responsible for notifying the Defense Contract Management Agency upon award. The contract is set aside for small businesses and requires compliance with Buy American Act provisions, with all submissions and communications governed by ECDS and WAWF systems.
Navsup Weapon Systems Support Mech

POSTED

about 15 hours ago

DEADLINE

in 24 days
View Details
NAICS: 332991
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE4A6-26-T-14LP
The solicitation seeks 11 bushings, sleeves with NSN 0001S00000052 under a Total Small Business Set-Aside, with delivery required within 951 days after award and a first article test unit due within 365 days after contract award. Offers must be submitted electronically via DIBBS by August 17, 2026, and are evaluated on a Lowest Price Technically Acceptable basis, with mandatory compliance required across technical, quality, cybersecurity, export control, packaging, and socioeconomic criteria. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements, with packaging and labeling required to meet MIL-STD-129 and ASTM D3951, and palletization subject to DLA-specific RP001 requirements. Inspection and acceptance occur at origin, and all supplies must comply with SAE AS9003 or ISO 9001 quality management systems. The item is subject to export controls under ITAR or EAR, requiring contractors to hold a valid US/Canada Joint Certification Program certification, complete mandatory training and questionnaire, and be approved by DLA to access controlled technical data. DFARS 252.204-7012 mandates implementation of NIST SP 800-171 cybersecurity controls, while DFARS 252.225-7048 prohibits unauthorized export of technical data. The contract prohibits the use of hexavalent chromium and covered defense telecommunications equipment, requires electronic invoicing through WAWF, and includes clauses covering employment eligibility, human trafficking prevention, sustainable products, and affirmative action for workers with disabilities. All contractors must be certified small businesses, with eligibility verified through UEI and CAGE codes, and must submit representations concerning socioeconomic status, joint ventures, and compliance with the Berry Amendment and Buy American Act. Pricing is not specified, and awards will be made based on lowest responsive and responsible offer meeting all technical acceptability thresholds.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency