Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Berry Amendment Compliant Nylon Fabric Supplier

Active

Federal

Response Deadline10/19/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract opportunity is for the supply of high-grade nylon fabric to prime contractors supporting MEDICAL SUPPLY CHAIN MD SURG FSF projects under the Department of Defense. The required material must be suitable for medical instrument rolls in accordance with NSN 6545013975260 and can be delivered as raw nylon fabric rolls or yardage. Performance for this contract will take place in San Antonio, Texas. A critical requirement for this procurement is the mandatory certification of origin to ensure full compliance with the Berry Amendment and the Buy American Act. Interested parties should note the solicitation was posted on October 13, 2026, with a response deadline of October 19, 2026. The project falls under NAICS code 313320.

General Info

Supply high-grade nylon fabric for DoD medical rolls in San Antonio, Texas.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

NAICS

313320 - Fabric Coating Mills

Place of Performance

SAN ANTONIO, TX, 78226, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE2DS-27-T-0644.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

INSERT, MEDICAL INSTRUM

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 13

subcontract

Response DeadlineOct 19

Submission deadline

Response Deadline

10/19/2026, 05:00:00 PM UTCin 3 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies high-grade nylon fabric for prime contractors on MEDICAL SUPPLY CHAIN MD SURG FSF projects. Provides nylon fabric suitable for medical instrument rolls per NSN 6545013975260. Requires mandatory certification of origin to ensure compliance with the Berry Amendment and Buy American Act. Delivers raw nylon fabric rolls or yardage.

Similar Contracts

Same NAICS industry code

High-Temperature Insulation Material SupplyThis subcontract involves the supply of raw high-temperature insulation fabrics and composite materials to prime contractors supporting DLA Weapons Support ASC projects. The scope of work requires the delivery of certified raw insulation textiles and fibers that strictly adhere to the thermal specifications outlined in the Technical Data Package. Managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, the contract mandates full compliance with the Berry Amendment and the Buy American Act. Performance for this requirement is centered at Tinker AFB, with the procurement categorized under NAICS code 313320.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Structural Firefighting Moisture Barrier Fabric SupplyThis subcontract involves the supply of specialized moisture barrier fabrics for prime contractors working on CAL FIRE structural firefighting protective ensemble projects. The scope of work includes the manufacture of technical fabrics designed for compatibility with PBI Flex/Max outer shells and Titanium/Glide Ice thermal liners. The supplier is responsible for delivering the physical fabric along with essential technical documentation, including PFAS data statements and manufacturer specifications. To ensure compliance with NFPA standards, the provider must supply UL Certified Letters that validate Thermal Protective Performance, Total Heat Loss, and Evaporative Resistance ratings. This procurement is categorized under NAICS code 313320 and is managed through the California state procurement system.

POSTED

DEADLINE

SEAL, NONMETALLIC SP

Solicitation # SPE7M1-26-T-353G

This fixed-price solicitation, issued by the DLA Land and Maritime Maritime Supply Chain, is for the procurement of six nonmetallic seals under NSN 5330-01-466-3085. The items are designated as critical application items and are associated with part numbers HS4183B1 from Rubbercraft Corporation of California and The Boeing Company, as well as part number RM017178 from The Boeing Company. The delivery is required within 102 days after the order, with a specified original delivery date of November 22, 2026, to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict material and quality standards, requiring that all supplied items be free of asbestos and Class I ozone-depleting chemicals. Due to the risk of deterioration from ultraviolet rays, the seals must be packaged in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117, Type II, Class C, Style 1. Marking must comply with MIL-STD-129 and MIL-STD-130N. Inspection and acceptance will occur at the origin, and the manufacturer's inspection system must meet SAE AS9003 or ISO 9001 standards. Administrative requirements include electronic invoicing via the Wide Area Workflow system and compliance with the Buy American Act and Berry Amendment. The contractor must also adhere to various cybersecurity and defense information controls, including CMMC Level 2 self-assessment and NIST SP 800-171 requirements. Quotations are to be submitted to the issuing office in Columbus, Ohio, by September 25, 2026.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Berry Amendment Compliant Blackout Fabric SupplyThis subcontract involves the sourcing and delivery of high-density blackout textile material to prime contractors fulfilling Defense Logistics Agency supply contracts. The scope of work requires the provision of raw fabric rolls or yardage originating from approved domestic sources to ensure full compliance with the Buy American Act and the Berry Amendment. To maintain these standards, the supplier must provide formal certification of origin for all materials delivered. The opportunity is categorized under NAICS code 313320 and is associated with the Department of Defense. Interested parties must adhere to the response deadline of October 26, 2026. Performance for this contract is designated for FPO 34085.

Defense Logistics Agency

POSTED

DEADLINE

Solicitation # SPE7M4-27-T-1177

Solicitation SPE7M4-27-T-1177 is a request for quotations issued by the DLA Weapons Support Fluid Handling Division for the procurement of one air duct hose, identified by NSN 4720012835967 and HBD Industries part number AD888B-24-10. The requirement is classified under NAICS code 313320. The original required delivery date is December 10, 2025, with a delivery period of five days after receipt of order. Shipping is FOB Origin, and the destination for both inspection and acceptance is the AF Supply Control Receiving office at Robins AFB, Georgia. The contract mandates strict adherence to packaging and marking standards, requiring compliance with ASTM D3951 and MIL-STD-129, with DLA Master List technical and quality requirements taking precedence. Palletization must follow RP001 guidelines. Invoicing and payment processing must be conducted electronically through the Wide Area WorkFlow system. Key regulatory clauses include the Buy American and Balance of Payments Program, safeguarding of covered defense information under DFARS 252.204-7012, and various prohibitions regarding covered defense telecommunications equipment and the use of hexavalent chromium.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

HOSE ASSEMBLY, NONME

Solicitation # SPE7M4-27-T-0076

Solicitation SPE7M4-27-T-0076 is a fixed-price request for quotations issued by the Defense Logistics Agency Land and Maritime Fluid Handling Division for the procurement of six nonmetallic hose assemblies, identified by NSN 4720-01-050-1335. The contract requires delivery within 66 days after order, with shipping terms set as FOB Origin and delivery to the DLA Distribution New Cumberland facility in Pennsylvania. Inspection and acceptance will also occur at the point of origin. The procurement is subject to strict export controls under ITAR and EAR, requiring contractors to have approved US/Canada Joint Certification Program certification and completed specific DLA training to access technical data. Compliance with the Buy American Act and the Berry Amendment is mandatory, and any use of non-domestic materials must be disclosed. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, including specific shelf-life markings. Additionally, the government will not evaluate or award contracts to offers utilizing additive manufacturing unless specifically authorized. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.

FLUID HANDLING DIVISION

POSTED

DEADLINE

in about 8 hours

Nonmetallic Hose Assembly Fabrication (Critical Application)This subcontract involves the manufacture and assembly of four nonmetallic hose assemblies for the DLA Weapons Support Fluid Handling Division. The fabrication must strictly adhere to NSN 4720999283326 and specific KNDS Defence UK Limited part numbers, including G406/4952/40, G406/8016 Item 117, and G406/8016/117. All work must be performed in compliance with DLA RA001, ASTM D3951, and MIL-STD-129 standards. The project requires the contractor to maintain DPAS DO-rating capability and ensure full compliance with the Berry Amendment. Performance will take place in New Cumberland, Pennsylvania. Interested parties must respond by October 23, 2026, for this critical application under NAICS code 313320.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Nonmetallic Hose Assembly Fabrication (NSN 4720011141721)This subcontract, issued by the Department of Defense for the DLA Weapons Support Fluid Handling Division, requires the fabrication of 112 nonmetallic hose assemblies under NSN 4720011141721. The assemblies must feature a 180-degree angular offset and strictly adhere to MIL-DTL-83796B(2) standards. All deliverables must be packaged and marked in accordance with MIL-STD-2073-1E and MIL-STD-129, with performance taking place in Corpus Christi, Texas. The project is designated as a Total Small Business Set-Aside and mandates strict compliance with the Buy American Act, the Berry Amendment, and restrictions on ozone-depleting chemicals. To qualify, the manufacturer must hold ISO 9001:2015 and SAE AS9100 certifications. Responses to this solicitation are due by October 23, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Manufacturing of Seal (NSN 5330-00-0758261)This subcontract involves the manufacture and delivery of 192 units of a specific seal, identified by NSN 5330-00-0758261, for prime contractors supporting the DLA Weapons Support Fluid Handling Division. The work must be performed at Tinker AFB and requires strict adherence to the DLA Master List of Technical and Quality Requirements, with identification marking applied according to MIL-STD-130N. Eligible providers must utilize rubber or elastomer molding equipment and materials that comply with the Buy American Act and the Berry Amendment. Additionally, the contractor is required to maintain JCP certification and CMMC Level 2 compliance to be eligible for the award.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Manufacturer of Nonmetallic Hose Assemblies (NSN 4720015628339)This subcontract, issued by the DLA Weapons Support Fluid Handling Division, requires the manufacture and delivery of 250 nonmetallic hose assemblies under NSN 4720015628339. The production must strictly adhere to federal specification MIL-H-775, Parker-Hannifin P2060639161616-24.0, and RA001 technical requirements. To ensure quality and compliance, the provider must maintain an ISO 9001:2015 certified inspection system. The contract is designated as a total small business set-aside and mandates full compliance with the Buy American Act and the Berry Amendment, specifically prohibiting the use of additive manufacturing. Performance will take place in Texarkana, Texas. Interested parties must respond by October 23, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Nonmetallic Hose Assembly ManufacturingThis subcontract involves the manufacture and supply of 64 nonmetallic hose assemblies for prime contractors supporting the DLA Weapons Support Fluid Handling Division. The assemblies must be produced according to NSN 4720-01-158-3227 specifications and maintain compatibility with part numbers from Danfoss, Parker Hannifin, or General Dynamics. All deliverables must be properly labeled and adhere to RA001 quality requirements and ASTM D3951 packaging standards. The project falls under NAICS code 313320 and is managed by the Department of Defense. Performance for this contract will take place in Tracy, California. Interested parties should note the response deadline of October 23, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Non-Metallic Hose Assembly FabricationThis subcontract involves the fabrication and supply of a specific non-metallic hose assembly for the Department of Defense under the DLA Weapons Support Fluid Handling division. The contractor is responsible for manufacturing a single hose assembly junction with a 35mm inner diameter and 44mm outer diameter, featuring female swivel fittings at both ends and a total length of 1370mm, all produced in accordance with altered item drawings. To be eligible for this project, the provider must maintain JCP certification and hold necessary ITAR/EAR authorizations. The final deliverable must be fully completed, tested, and inspected to ensure compliance with technical specifications. The solicitation was posted on October 12, 2026, with a response deadline of October 23, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Same awarding agency

IV Fluid Administration Set SupplierThis subcontract through the Department of Defense Medical Supply Chain MD SURG FSF requires the manufacture or distribution of sterile, FDA-regulated intravenous fluid administration sets for prime contractors. The required equipment must feature universal spikes, slide or roller clamps, backcheck valves, Caresite valve injection sites, and spin-lock connectors. All products must be DEHP-free and Latex-free, adhering strictly to RP001 palletization and Medical Marking Standard No. 1. The contract specifies the delivery of IV sets in cases of 50 under NSN 6515017110944, with the place of performance located at Fort Bragg. Operating under NAICS code 339112, the solicitation was posted on October 15, 2026, with a response deadline of October 21, 2026.

Surgical and Medical Instrument Manufacturing

POSTED

about 16 hours ago

DEADLINE

Application Bar SupplyThis subcontract involves the fabrication and delivery of application bars for prime contractors supporting DLA Troop Support Medical Supply Chain projects. The contractor is responsible for producing these components according to the specific dimensions and material requirements of NSN 6510-01-532-6656, utilizing approved medical-grade plastics or metals. A critical requirement of the agreement is strict adherence to Berry Amendment compliance. The project is managed under the Department of Defense for the Medical Supply Chain MD Surg FSF, with performance taking place at Joint Base Lewis McChord. Classified under NAICS code 339113, the contract requires the successful manufacture and delivery of the specified medical hardware to meet agency standards.

Surgical Appliance and Supplies Manufacturing

POSTED

about 16 hours ago

DEADLINE

High-Absorbancy Pad and Elastic Dressing SupplyThis subcontract involves the supply of raw medical textile components for prime contractors supporting DLA Troop Support Medical Supply Chain projects. The scope of work focuses on the manufacture and bulk delivery of 12 by 12 inch white high-absorbancy pads and extra-wide secondary elastic dressings. These products must be fabricated using medical-grade non-woven fabrics, elastic polymers, and absorbent cotton or cellulose materials. Managed by the Department of Defense under the Medical Supply Chain MD Surg FSF, the contract requires strict adherence to Berry Amendment compliance to ensure all materials are domestically sourced. Performance for this contract is centered at Joint Base Lewis McChord. The opportunity was posted on October 15, 2026, with a response deadline of October 21, 2026, falling under NAICS code 339113.

Surgical Appliance and Supplies Manufacturing

POSTED

about 16 hours ago

DEADLINE

Sterile Abdominal Wound Kit AssemblyThis subcontract involves the final assembly, sterile packaging, and quality certification of abdominal wound bandage kits for the Department of Defense Medical Supply Chain. The scope of work includes assembling individual components such as application bars and absorbency pads within a sterile clean-room environment. All kits must be sterilized to medical standards and packaged in sealed unit containers in strict accordance with MIL-STD-2073-1E and Medical Marking Standard No. 1. The project is managed under NAICS code 339113 and will be performed at Joint Base Lewis McChord. The contractor is responsible for the delivery of completed, sterile, and properly marked bandage kits to prime contractors supporting DLA Troop Support. The response deadline for this opportunity is October 21, 2026.

Surgical Appliance and Supplies Manufacturing

POSTED

about 16 hours ago

DEADLINE

HazMat Transportation and Delivery ServicesThis subcontract for HazMat Transportation and Delivery Services involves hauling hazardous materials for prime contractors supporting DLA Troop Support Medical Supply Chain projects. The primary scope of work is the transport of alcohol-based hand sanitizer from a warehouse to Fort Riley, Kansas, utilizing vehicles specifically certified for flammable liquids. All shipments must adhere to strict hazardous material labeling requirements in accordance with DOT regulations and Hazard Communication Standard 29 CFR 1910.1200. The contract operates under NAICS code 484220 and is managed by the Department of Defense. Deliveries are required to be completed FOB Destination within 20 days of the order date. The solicitation was posted on October 15, 2026, with a response deadline of October 21, 2026.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 16 hours ago

DEADLINE

Supply of Waterless Hand Sanitizer (NSN 8520-01-346-9200)This subcontract involves the supply of unscented, waterless hand cleanser for prime contractors supporting Department of Defense projects under the DLA Troop Support Medical Supply Chain. The required product is a 70 percent ethyl alcohol base cleanser provided in 4 fluid ounce bottles, specifically meeting NSN 8520-01-346-9200 specifications. All supplies must be delivered in packaged units of 24 bottles and maintain a minimum shelf life of 36 months. The contract mandates strict adherence to Medical Marking Standard No. 1, MIL-STD-129, and MIL-STD-2073-1E, while ensuring full compliance with the Buy American Act and the Berry Amendment. Performance for this requirement is centered at Fort Riley, Kansas. Interested parties must respond by October 21, 2026, under NAICS code 325412.

Pharmaceutical Preparation Manufacturing

POSTED

about 16 hours ago

DEADLINE

Supplier of Hypo-Allergenic Baby Oil (NSN 8510-01-361-6895)This subcontract involves the supply of 10,000 bottles of hypo-allergenic baby oil, identified by NSN 8510-01-361-6895, for prime contractors delivering to the Department of Defense Medical Supply Chain MD SURG FSF. The oil must be provided in 4 fl oz bottles and adhere to RS020/RS001 shelf-life standards for TYPE I CODE Q items. A strict 36-month shelf life is required, with a limitation that no more than 5 months may have elapsed between the date of manufacture and the date of delivery. All materials must be packaged according to PKGING DATA-QUP:001 and FED-STD-313 specifications. The contract is established as FOB Destination with the place of performance located at FPO 96675. This procurement falls under NAICS code 325611 and requires the supplier to either manufacture or source the product to meet these specific medical and military standards.

Soap and Other Detergent Manufacturing

POSTED

about 16 hours ago

DEADLINE

Sterile Processing and Medical PackagingThis subcontract for the Department of Defense Medical Supply Chain involves providing specialized sterilization and medical-grade packaging services for prime contractors supporting DLA Troop Support. The scope of work focuses on the processing of elastomeric burn dressings using either Gamma or EtO sterilization methods. The contractor is responsible for ensuring all items are individually sterilized, marked according to Medical Marking Standard No. 1, and packaged in compliance with ASTM D3951 and FED-STD-313 to guarantee a 60-month shelf life. The project is categorized under NAICS code 812990 and will be performed in Richmond, Virginia. Interested parties must adhere to the timeline associated with the solicitation, which was posted on October 15, 2026, with a response deadline of October 21, 2026.

All Other Personal Services

POSTED

about 16 hours ago

DEADLINE

Antimicrobial Silver-Plated Elastomeric Fabric ProductionThis subcontract involves the production of antimicrobial silver-plated elastomeric fabric for the Department of Defense, specifically supporting DLA Troop Support medical supply contracts. The manufacturer is responsible for weaving nylon and denier elastane blends, applying a specialized coating of 99 percent pure metallic silver and 1 percent silver oxide, and precision cutting the material to 3x33 inch dimensions. All production must utilize medical-grade fibers and silver plating equipment to strictly adhere to NSN 6510-01-659-7569 specifications. The project is managed under NAICS code 313210 and is overseen by the Medical Supply Chain MD Surg FSF. Finished deliverables consist of coated fabric rolls or sheets, with the place of performance located in Richmond, Virginia. The solicitation was posted on October 15, 2026, with a response deadline of October 21, 2026.

Broadwoven Fabric Mills

POSTED

about 16 hours ago

DEADLINE

OXIMETER, PULSE

Solicitation # SPE2DS-27-T-0704

Solicitation SPE2DS-27-T-0704 is a fixed-price contract issued by the Defense Logistics Agency for the procurement of 15 Masimo MightySat Rx Pulse Oximeters, identified by NSN 6515-01-655-9412. These medical devices are specifically designed for patient movement environments to measure pulse rate, oxygen saturation, and perfusion index, featuring a battery life of approximately 1,800 spot checks and a compact design weighing 0.16 pounds. The delivery is required by June 16, 2026, with the place of performance and delivery located at the Naval Weapons Station in Yorktown, Virginia. The contract mandates strict adherence to medical packaging and marking standards, specifically requiring Medical Marking Standard No. 1, which supersedes MIL-STD-129. All units must be delivered in sealed commercial containers and comply with ASTM D3951 and DLA packaging requirements. Regulatory compliance is critical, as the devices require a 510(k) and must meet GMP and registration standards. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with various DFARS and FAR clauses regarding cybersecurity, domestic sourcing under the Buy American Act, and the prohibition of covered defense telecommunications equipment.

Surgical and Medical Instrument Manufacturing

POSTED

about 16 hours ago

DEADLINE

DRESSING, BURN, ANTIMICR

Solicitation # SPE2DS-27-T-0703

Solicitation SPE2DS-27-T-0703 is a fixed-price procurement issued by the Department of Defense, DLA Troop Support, for one unit of antimicrobial burn dressing (NSN 6510-01-659-7569). The required item is a sterile, flexible elastomeric dressing measuring 3 by 33 inches, composed of 87 percent nylon and 13 percent denier elastane with a coating of 99 percent pure metallic silver and 1 percent silver oxide. Designed for use in burns, wounds, donor graft sites, and various ulcers, the dressing must have a shelf life of 60 months, with no more than 9 months elapsed from the date of manufacture to the date of government delivery. Delivery is required within 5 days after receipt of order, with the destination and acceptance point located in Richmond, Virginia. Packaging must be commercial per ASTM D3951, unless the material is deemed hazardous under FED-STD-313, in which case TQ requirement IP025 applies. All items must be marked according to Medical Marking Standard No. 1, which supersedes MIL-STD-129. The contract incorporates several key regulatory clauses, including the Buy American and Balance of Payments Program, and requires the use of the Wide Area WorkFlow system for invoicing. Quotations must be submitted via the DIBBS portal by October 21, 2026, and the award may be subject to a HUBZone price evaluation preference.

Surgical Appliance and Supplies Manufacturing

POSTED

about 16 hours ago

DEADLINE

Solicitation # SPE2DS-27-T-0702

Solicitation SPE2DS-27-T-0702 is issued by the DLA Troop Support Medical Supply Chain MD Surg FSF for the procurement of 10,000 bottles of hypo-allergenic baby oil, 4 fl oz each. The items must be delivered FOB Destination within five days of the award, with an original required delivery date of October 16, 2026. The product is subject to a non-extendable shelf life of 36 months, and no more than five months may have elapsed from the date of manufacture to the date of delivery to the government. Compliance requirements include marking materials according to the latest edition of Medical Marking Standard No. 1 and MIL-STD-129. Packaging must adhere to ASTM D3951 for non-hazardous materials or TQ requirement IP025 for hazardous materials, with DLA Master List of Technical and Quality Requirements taking precedence. The contract incorporates various DFARS and FAR clauses, including the Buy American Act, the Berry Amendment, and cybersecurity reporting under DFARS 252.204-7012. Invoicing and payment are to be processed electronically via the Wide Area WorkFlow system. Award evaluation may include a HUBZone price preference, and offerors must be registered in the System for Award Management.

Toilet Preparation Manufacturing

POSTED

about 16 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS