This Sources Sought opportunity from Department Of Defense was posted on June 30, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Blade Seal Replacement - Bonneville Lock and Dam

Closed

W9127N26Q1C2LFederal

Submission Closed07/14/2026, 08:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 339991

New

DIBBS

Supply of Critical Application Gaskets (NSN 5330-01-483-8638)

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Solicitation # SPE7L3-26-T-084A

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Solicitation # SPE7M5-26-U-0065

Solicitation SPE7M5-26-U-0065 is a request for quotations issued by the Department of Defense, specifically the DLA Land and Maritime Active Devices Division, for the procurement of 3,182 spiral wound gaskets under NSN 5330-00-348-9152. This is a total small business set-aside under NAICS code 339991, structured as a unilateral indefinite delivery contract with a maximum value of 350,000 dollars. The delivery requirement is 63 days after receipt of order, with inspection and acceptance occurring at the destination. The contract mandates strict adherence to technical and quality standards, including RA001, RP001, and MIL-STD-129 for marking. Packaging must comply with MIL-STD-2073-1E and RP001. Due to the nature of the technical data, the contract is subject to export controls under ITAR or EAR, requiring contractors to have approved JCP certification and specific DLA training. Additionally, the item must be free of asbestos per FED-STD-313. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment. Offerors must comply with the Buy American Act and Berry Amendment, and those utilizing non-domestic materials must provide full disclosure. Quotes are due by September 11, 2026, via the DIBBS portal, and must not utilize additive manufacturing unless specifically authorized.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Solicitation # SPE4A7-26-R-0778

Solicitation SPE4A7-26-R-0778 is an Indefinite Quantity Contract issued by DLA Aviation for the procurement of Flexible Couplings (NSN 1660-00-560-4009), identified as a Critical Application Item. The contract features a three-year base period with a guaranteed minimum quantity of 42 units and an estimated annual quantity of 120 units. Delivery is required 365 days after receipt of order, with inspection and acceptance occurring at the destination. The procurement is a Firm Fixed Price agreement and allows for approved part numbers from The Boeing Company, Arrowhead Products Corp, and Flexible Technologies Inc. Technical and quality compliance is governed by the DLA Master List of Technical and Quality Requirements, including specific mandates for Source Approval Requests, tailored higher-level quality requirements, and CMMC Level 2 self-assessment. Packaging must adhere to ASTM D3951 and MIL-STD-129, with palletization following RP001. Item Unique Identification is not required per DFARS 252.211-7003(c)(1)(i). Quality assurance involves sampling methods per MIL-STD-1916 or ASQ H1331, requiring zero non-conformances for acceptance. Administrative requirements include the use of the Wide Area Workflow system for invoicing and payment.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Solicitation # SPE7L1-26-T-05J4

Solicitation SPE7L1-26-T-05J4 is a request for quotations issued by the Department of Defense, DLA Land and Maritime, for the procurement of 242 O-rings (NSN 5331-01-338-7343). The requirement is under NAICS code 339991, with a need ship date of February 2, 2027, and an original required delivery date of March 1, 2027. Delivery is FOB Destination to the DLA Distribution DDSP New Cumberland facility in Pennsylvania, where both inspection and acceptance will occur. The contract mandates strict quality and material standards, including a total prohibition of asbestos and Class I ozone-depleting chemicals. Items must be packaged in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117 and marked according to MIL-STD-129 and MIL-P-4861. Contractors must maintain supply chain traceability documentation and adhere to the Buy American Act and Berry Amendment. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow system. Quotations are due by September 11, 2026.

POSTED

DEADLINE

SEAL, NONMETALLIC STRIP

Solicitation # SPE7LX-26-U-9818

Solicitation SPE7LX-26-U-9818 is a total small business set-aside issued by the DLA Land and Maritime Strategic Acquisition Program Directorate for the procurement of nonmetallic strip seals, identified by NSN 5330-01-366-1066. The requirement is for an estimated quantity of 201 units and may result in a one-year indefinite delivery contract with a maximum value of 350,000.00 dollars. Delivery is required within 71 days after the order is received, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. The contract mandates strict adherence to DLA packaging requirements under RP001 and MIL-STD-2073-1E, with marking following MIL-STD-129. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements, and the items must be free of asbestos and intentionally added mercury. Offerors must submit quotes via the DIBBS portal and are encouraged to provide quantity ranges. Payment processing is managed through the Wide Area Workflow system. The procurement also incorporates various FAR and DFARS clauses, including those regarding the Buy American Act, Berry Amendment, and cybersecurity safeguarding under DFARS 252.204-7012.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Solicitation # SPE7L1-26-T-264X

POSTED

DEADLINE

Solicitation # SPE7M4-26-T-361N

This solicitation issued by the Defense Logistics Agency under the Department of Defense concerns the procurement of 13,964 O-Rings, identified by NSN/Part Number 5331-00-250-0224. The procurement is managed under solicitation number SPE7M4-26-T-361N and is categorized as a federal solicitation. The solicitation was posted on August 23, 2026, with a response deadline set for August 31, 2026. Interested parties can access further details and submit responses through the official DIBBS procurement portal. This contract is intended to fulfill specific logistical requirements for the Department of Defense.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # SPE7L3-26-T-217N

This contract solicitation, identified as SPE7L3-26-T-217N, is issued by the Department of Defense Land Supplier Operations Vehicle Support for the procurement of 65 units of Magnetic Shaft Seal Assemblies, part number 91082 from Magnetic Seal LLC. The item is classified under NSN 5330-01-357-6393 and is designated as a critical application item. The procurement is a total small business set-aside under NAICS code 339991, with a required delivery date of June 7, 2027, and a delivery timeframe of 115 days after order. The contract mandates strict adherence to DLA packaging requirements, including MIL-STD-2073-1E and MIL-STD-129 for marking. Due to the potential for deterioration from ultraviolet rays, the items must be sealed in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117. Additionally, the contract explicitly prohibits the use of asbestos as defined in FED-STD-313. Delivery is FOB Origin, with both inspection and acceptance occurring at the destination, specifically DLA Distribution Depot Hill at Hill AFB, Utah.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Solicitation # SPE7L3-26-T-237G

Solicitation SPE7L3-26-T-237G is a request for quotations issued by DLA Land and Maritime for the procurement of 407 units of preformed packing, identified by NSN 5330-00-922-5947. The requirement is open for full and open competition, with quotes due by September 21, 2026. Delivery is expected by January 17, 2027, with a need ship date of September 10, 2026. The items must be free of asbestos and adhere to a non-extendable shelf life of 180 months. Inspection and acceptance will occur at the destination, specifically the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to technical and quality standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Special requirements include oxygen clean packaging (IP042) and hazardous materials shipping (IP025). Offerors must comply with the Buy American Act and the Berry Amendment, and those seeking the HUBZone price evaluation preference must be SBA-certified. Payment will be processed electronically via the Wide Area WorkFlow system. The solicitation incorporates the DLA Master Solicitation for Automated Simplified Acquisitions Revision 105 and various FAR and DFARS clauses regarding cybersecurity, safeguarding of defense information, and the prohibition of certain telecommunications equipment.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Solicitation # SPE7L3-26-T-168M

The contract solicitation SPE7L3-26-T-168M seeks six gaskets identified by NSN 5330-01-483-8638 and part number 3798661-1 from Sargent Aerospace & Defense, LLC, designated as a critical application item with a non-extendable shelf life of 180 months, requiring at least 85 percent of that shelf life to remain upon delivery. The gasket must be free of asbestos and compliant with technical and quality specifications referenced by R or I numbers from the DLA Master List of Technical and Quality Requirements, which are incorporated by reference. Mercury and mercury-containing compounds are prohibited in direct contact with the item unless specifically exempted for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical analysis reagents specified by NAVSEA; portable fluorescent lamps and instruments containing mercury must be shockproof and possess a secondary containment boundary per NAVSEA 5100-003D. Packaging must adhere to MIL-STD-2073-1E and MIL-DTL-117, Type II, Class C, Style 1, using a medium-duty, waterproof, greaseproof, opaque bag to protect against UV degradation, with preservation method 33, cleaning/drying method 1, and no preservation or cushioning materials. Marking must comply with MIL-STD-129, including special marking code 32 for shelf-life items, and hazardous materials must be labeled under the Hazard Communication Standard (29 CFR 1910.1200), with exceptions noted for items governed by other federal statutes. Delivery is required within 165 days of order receipt, FOB origin, to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Electronic invoicing via WAWF is mandatory with both invoice and receiving report submissions unless an exception applies. The contractor must validate representations in SAM, including small business and socio-economic status, and certify compliance with prohibitions on covered defense telecommunications equipment, hexavalent chromium, and acquisition from Communist Chinese military companies. Cybersecurity obligations include adherence to NIST SP 800-171 requirements and safeguarding covered defense information with incident reporting procedures. Whistleblower rights, restriction on mandatory arbitration, and disclosure of information clauses are all incorporated without deviation, except for several FAR and DFARS clauses which include specific deviations effective February and March

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Specialized Component Supply (Gaskets & Seals)

NASA Johnson Space Center

POSTED

about 22 hours ago

DEADLINE

in 3 days

AI Contract Overview

This sources sought notice is issued for market research purposes to gauge industry interest and capability in supplying and installing endless blade seals for the Kaplan turbine at Bonneville Powerhouse 2, specifically for Main Unit 16. The government seeks responses from a broad range of contractors including small businesses, small disadvantaged businesses, 8(a) firms, HUBZone, WOSB, EDWOSB, SDVOSB, and VOSB, with the goal of determining whether the upcoming procurement can be set aside for small businesses. The NAICS code designated is 339991 with a size standard of 600 employees, and performance will occur at Bonneville Dam, requiring contractor access via I-84 Exit 40. The project involves replacing original 1980s trunnion seals in-place within the water passage, with the government handling removal of followers and housing preparation, while the contractor will supply and install seamless, bonded seals with no visible splits. Responses must be submitted electronically by 1:00 pm PT on July 14, 2026, to two designated contracting personnel and are limited to four pages. Each submission must include the firm’s SAM-registered details, business classification, capabilities, relevant certifications, equipment, past performance on similar projects, joint venture structure, bonding capacity, and intent to bid when the formal solicitation is issued. To support potential set-aside determination, firms are strongly encouraged to provide up to three project examples that match the scope, complexity, and constraints of the blade seal replacement task, including asbestos removal certification as a recommended qualification. Firms must be currently registered in SAM to be considered for size status. This notice does not commit the government to a contract, no reimbursement is provided for response preparation costs, and all submitted information may be used for any legal governmental purpose without acknowledgment or feedback to respondents.

General Info

U.S. Army Corps seeks market input on replacing blade trunnion seals at Bonneville Dam, no contract obligation.

Agency

Department Of Defense → W071 Endist PortlandView Agency

NAICS

339991 - Gasket, Packing, and Sealing Device ManufacturingView NAICS

Place of Performance

Cascade Locks, OR, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedJun 30

Sources Sought

Response DeadlineJul 14

Deadline has passed

Submission Closed

07/14/2026, 08:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → W071 Endist Portland

Contacts1 person available

OfficePORTLAND, OR, 97204-3495, USA

Organization / Agency

Department Of Defense → W071 Endist Portland

View Agency Profile

Office AddressPORTLAND, OR, 97204-3495, USA

Contacts

Jessica Manley

contact@example.gov

Full Description

General. This is a SOURCES SOUGHT and is for informational/market research purposes only. THIS IS NOT A REQUEST FOR PROPOSAL, QUOTATION OR BID, NOR A SYNOPSIS OF A PROPOSED CONTRACT ACTION UNDER FAR SUBPART 5.2.

This Sources Sought is to gain knowledge of the interest, capabilities, and qualifications of industry so the government can make informed business decisions. We are seeking responses from both large and small business members of industry to include: Small Business, Small Disadvantaged Businesses to include 8(a) firms, Historically Underutilized Business Zones (HUBZone), Woman-Owned Small Business (WOSB) to include Economically Disadvantaged Women-Owned Small Business (EDWOSB), Service-Disabled Veteran-Owned Small business (SDVOSB) and Veteran Owned Small Business (VOSB). All interested parties are highly encouraged to respond.

Reponses to this Sources Sought announcement will be used by the Government to make business decisions and to inform potential future solicitations.

The North American Industrial Classification Code (NAICS) for this requirement is: 339991 – Gasket, Packing, and Sealing Device Manufacturing

The related size standard is: 600 employees

Formal Sources Sought Response Due – 14July2026 at 1:00 pm PT.

Project Background. The work site is located at Bonneville Dam, Powerhouse 2. Contractor access to the work site will be from I-84 Exit 40. The Kaplan turbine has 5 blades with original 1980s blade trunnion seals installed. Main Unit 16 (MU16) was found leaking and requires an in-place seal replacement from the water passage.

Project Scope. The scope of the blade seal replacement for MU16 will include supply and install of endless blade seals at Bonneville Powerhouse 2. Work is planned to be within the water passage of the unit; scaffolding will be installed and maintained with a separate contract.

The contract will include supply and installation of the seals in the housing between the blade trunnion and runner hub. The endless blade seals are required to have no visual indication of a split after bonding is completed. The Government will be removing followers before seal install and installing the followers after installation of seals by the Contractor. The Government will also prepare the housing for the new blade seals (cleaning and detailed measurements).

Number and Type of Contracts: NWP contemplates awarding one firm fixed priced supply contract. The acquisition strategy decision has not yet been determined.
Submission Instructions. Formal responses to this Sources Sought notice must be submitted electronically (via email) with SUBJECT: Sources Sought – Blade Seals. Please email to Jessica Manley, Contracting Specialist, at Jessica.Manley@usace.army.mil and Cory Pfenning, Contracting Officer, at Cory.R.Pfenning@usace.army.mil, before 1:00 pm Pacific time on 14 July 2026.

Interested parties’ responses to this Sources Sought shall be limited to four (4) pages and shall include the following information:

Firm's name, address, point of contact, phone number, e-mail address, CAGE and Unique Entity ID.
Firm's business category and size: Large Business (include summary of small business participation metrics), Small Business, Small Disadvantaged Businesses to include 8(a) firms, Historically Underutilized Business Zones (HUBZone), Woman-Owned Small Business (WOSB) to include Economically Disadvantaged Women-Owned Small Business (EDWOSB), Service-Disabled Veteran-Owned Small business (SDVOSB) and at the subcontracting level, Veteran Owned Small Business (VOSB).
An explanation of the prime firm’s capabilities, special qualifications/certifications and equipment and describe the work to be self-performed as it pertains to the proposed work outlined in the Project Scope
A description of work performed under similar project constraints and challenges listed under paragraph 3.
Project Examples (for Joint Ventures, please include projects completed by the Joint Venture if available). Note these examples are used to determine if the government can acquire this using a Set-aside:

To be considered for a potential set aside strategy, it is recommended contractors provide a minimum of one (1) and maximum of three (3) projects and be certified in removing asbestos. These project examples should be similar in size, scope and complexity to the work described in paragraph 3 of this notice, with a description of each project (to include pertinent qualitative and quantitative information about featured scope elements), and include the following:

Project Title

Contract Number

Contract award date

Customer name, phone number and email address

Prime or Subcontractor

Initial contract dollar value

Final contract dollar value

Initial contract completion date

Final contract completion date

Customer satisfaction

The Government may verify information in CPARS or PPIRS.

Firm's Joint Venture information if applicable - existing and potential.

Firm's Bonding Capability.

Firm's interest and the likelihood in bidding on the solicitation when it is issued. (Refer to planned advertisement and performance dates)

Responses to the government’s questions in paragraph 5 and any other information the contractor feels the government needs to be aware of.

Disclaimer and Important Notes. This notice does not obligate the Government to award a contract. No reimbursement will be made for any costs associated with providing information in response to this Sources Sought or any follow up information. The Government reserves the right to use information provided by respondents for any purpose deemed necessary and legally appropriate. Any organization responding to this notice should ensure that its response is complete and sufficiently detailed to allow the Government to determine the organization's capabilities to perform the work. Respondents are advised that the Government is under no obligation to acknowledge receipt of the information received or to provide feedback to respondents with respect to any information submitted.

All interested firms must be registered in the System for Award Management (SAM) at https://www.sam.gov to have size status considered. You must remain current for the duration of the source selection process to be eligible for award of a Government contract.