Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

BLADE, WINDSHIELD WI

Active
SPE4A7-26-T-480DFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract pertains to the procurement of windshield wiper blades, identified by NSN 1680015187388 and part numbers from Grimes Aerospace and Boeing, with a requirement for nine units to be delivered within 85 days from the contract award. Delivery is FOB origin, with inspection and acceptance occurring at the destination, specifically the DLA Distribution Depot in Tinker AFB, Oklahoma. The item is designated as a critical application component, subject to stringent quality and configuration controls, and must comply with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with no special marking required. Packaging must adhere to DLA’s procurement and preservation standards, including specific preservation methods and unit container specifications. The contract mandates adherence to zero-defect sampling under MIL-STD-1916 or equivalent, with critical, major, and minor attributes assigned verification levels and AQL thresholds as defined. Supply chain traceability documentation must be retained per DLA Directive Procurement Note C03, and cybersecurity compliance requires a CMMC Level 2 self-assessment. The contractor must also comply with FAA airworthiness approval requirements and bare part marking standards, while ensuring all technical and quality specifications referenced by R or I numbers are met as defined in the DLA Master List. The contract includes no flexibility in quantity, with zero variance permitted, and prohibits removal of government identification from non-accepted supplies. Transportation and shipping logistics are governed by specific DLA procedural notes, and the delivery deadline is set for October 7, 2026, with a need ship date of September 12, 2026.

General Info

Procure nine windshield wiper blades, deliver by October 7, 2026, comply with MIL-STD, DLA, and CMMC Level 2 requirements.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

336310 - Motor Vehicle Gasoline Engine and Engine Parts ManufacturingView NAICS

Place of Performance

3301 F AVE CEN REC BLDG 506 DR 22, TINKER AFB, OK, 73145-8000, US

Set-Aside

NONE

Documents

(1)

SPE4A7-26-T-480D.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV
View Agency Profile
Office AddressUS
Contacts
MEL ASTATIKE
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BLADE,WINDSHIELD WI
BLADE,WINDSHIELD WI
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RP003: PRESERVATION, PACKAGING, PACKING AND MARKING REQUIREMENTS FOR
FEDERAL AVIATION ADMINISTRATION COMMERICAL MATERIAL
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ046: FAA Bare Item Marking Requirements RQ018: CONTRACTOR RETENTION OF SUPPLY CHAIN TRACEABILITY DOCUMENTATION (AUG 2016) This item requires supply chain traceability documentation in accordance with DLA Directive (DLAD) Procurement Notes #C03 Contractor Retention of Supply Chain Traceability Documentation (AUG 2016)#. The full text of C03 can be found in the DLAD Procurement Notes on the Web at: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. (End of TQ Requirement)
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RD002, COVERED DEFENSE INFORMATION APPLIES
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment The following Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information. RQ019: Federal Aviation Administration (FAA) Airworthiness Approval
SPE4A7-26-T-480D
SECTION B
Please refer to Procurement Note L32 in lieu of Higher Level Contract Quality STO's.
CRITICAL APPLICATION ITEM
GRIMES AEROSPACE COMPANY 72914 P/N 90-0327-1 THE BOEING COMPANY 81205 P/N S232T601-85
IAW REFERENCE QAP 13873 CDRL-FAACERTCOM-25015 REVISION NR DTD 01/14/2025 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017107998 0001 EA 9.000
NSN/MATERIAL:1680015187388
DELIVERY (IN DAYS):0085
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:33 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:EA CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:A
UNIT CONT:BE OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SPE4A7-26-T-480D
SECTION B
PR: 7017107998 PRLI: 0001 CONT’D
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
Need Ship Date:09/12/2026 Original Required Delivery Date:10/07/2026
SPE4A7-26-T-480D NSN/Part Number: 1680-01-518-7388 Quantity: 9 EA Purchase Request: 7017107998QTY: 9 Delivery: 85 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336310
New
DIBBS
O-RINGThe contract governs the supply of an O-RING with NSN 5331-01-652-8721, quantity of 51 units, under solicitation SPE7L5-26-Q-0156, with delivery required within 30 days after award. The item is classified as a critical application and must comply with stringent technical and quality standards including MIL-STD-130 for Item Unique Identification (IUID), MIL-STD-129 for marking, and MIL-STD-2073-1E for packaging. It is subject to the DFARS 252.211-7003 clause regarding Covered Defense Information and requires FAA Airworthiness Approval. Quality assurance follows MIL-STD-1916 or equivalent zero-based sampling with acceptance criteria of zero non-conformances unless otherwise specified, and non-conforming attributes are assigned verification levels or AQLs as defined by the drawing or QAP. The manufacturer must maintain ISO 9001:2015 certification and adhere to all referenced technical and quality requirements from the DLA Master List. Packaging must conform to DLA-specific requirements including preservation method 33, unit packaging as BE, and palletization per RP001, with no special marking applied. Delivery is FOB origin to the destination at Tinker AFB, Oklahoma, with inspection and acceptance occurring at the destination. The item is part of a federal acquisition with no quantity variance allowed and is tracked through the DLA logistics system with identified point of contact and procurement details.
LAND SUPPLIER OPNS ENGINES

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 336310
New
DIBBS
VALVE, SOLENOID
DDSP NEW CUMBERLAND FACILITY

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 336310
New
Federal
ACTUATOR,ELECTRO-METhis contract pertains to the procurement of an ACTUATOR, ELECTRO-ME under solicitation number SPRMM126QHC66, issued by DLA Mechanicsburg under emergency acquisition flexibilities per FAR Part 18. The requirement specifies that the actuator must conform to Cage Code 75477 and reference number AC-3313-26, with physical marking compliant with MIL-STD-130 Rev N. The contractor is responsible for ensuring full compliance with all quality standards, including inspection, preservation, packaging, and marking in accordance with MIL-STD-2073 and other referenced documents, with records retained for 365 days after final delivery. Any design, material, or part number changes require prior written approval from the NAVICP-MECH Contracting Officer, categorized by specific code definitions governing interchangeability and substitution. The contractor must be an authorized distributor of the original manufacturer and provide documented proof of authorization with their offer. The contract mandates electronic submission of invoices and receiving reports through the Wide Area Workflow (WAWF) system and requires registration with the Electronic Document Access portal via PIEE. Vendors not acting as manufacturers must disclose the OEM’s CAGE code and part number. All submissions via EDI must explicitly note any deviations from solicitation requirements, or they will be considered non-compliant and subject to cost deductions upon modification post-award. The response deadline has been extended to July 27, 2026, with all other terms unchanged. Applicable DLA procurement notes include those addressing manufacturing phase-outs, packaging corrections, product verification, inspection at source, and additive manufacturing. Compliance with Buy American provisions, equal opportunity for veterans, security exclusions, and annual certifications is required, and all technical data must adhere to specified distribution statements under OPNAVINST 5510.1. Contractors are advised to register with NAVSUP WSS for automated notifications and to access critical documents through official DOD and DLA sources.
SPRMM1 DLA Mechanicsburg

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 336310
New
Federal
Marine Outboard Engines The contract solicits four Honda outboard engines, specifically two with clockwise rotation and two with counter-clockwise rotation, to meet marine propulsion requirements. This is a total small business set-aside under the SBA program, classified under NAICS code 336310 for motor vehicle parts and accessories manufacturing, ensuring eligibility is restricted to small businesses. The solicitation, issued by the Department of Defense through the W6QM Micc-Ft Drum office, was posted on July 17, 2026, with a response deadline of July 24, 2026. The contract is a combined solicitation, indicating it may include both purchase and service elements. The place of performance is listed with a ZIP code of 28409, suggesting delivery or installation will occur in North Carolina, while the coordinating office is based at Fort Drum, New York. Primary point of contact for inquiries is Kevin Harp, reachable via email or phone provided in the solicitation details.
W6QM Micc-Ft Drum

POSTED

about 20 hours ago

DEADLINE

in 6 days
View Details
NAICS: 336310
New
Federal
Valve, Liquid OxygenThe Defense Logistics Agency (DLA) Weapons Support in Columbus, Ohio, is preparing to issue a solicitation for NSN 4820-00-796-9680, Valve, Liquid Oxygen, to ensure stock replenishment for military depots. This item, sourced exclusively from Essex Industries Inc. under part number 20C-0021-2, is classified as a Critical Safety Item with higher-level quality requirements and mandates a Contractor First Article Test. The procurement will be conducted as a Fixed Price Indefinite Delivery Contract with a three-year base period, under the First Destination Transportation program, and is not reserved for small businesses. Delivery timelines are 270 days without First Article Testing or 375 days with it, with FOB Origin and inspection at origin required. The contract falls under NAICS code 336310 and adheres to FAR Part 12 policies for commercial items. Proposals must be submitted electronically, preferably via Dibbs, with email submissions accepted up to 15MB to Kristina.Wolf@dla.mil. The solicitation, numbered SPE7MX26RX062, will be released on June 22, 2026, with proposals due by July 23, 2026. Evaluation will consider a combination of price, past performance, delivery capability, and other factors listed in the solicitation. Price discussions will occur through an online reverse auction where offerors’ bids will be anonymously disclosed to participants, and the final auction price will serve as the offeror’s final proposal revision unless further discussions are initiated. All offers must be in U.S. dollars and in English, and the Contracting Officer retains authority to conduct additional negotiations under FAR 15.307 if necessary.
DLA Land And Maritime

POSTED

about 20 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 336310
New
SLED
Marine Engine Supply – Jetboat MotorA marine-rated General Motors LT4 6.2L supercharged engine platform is being procured for integration into jetboat applications, with the contract encompassing the full supply of the engine along with all necessary integration components required for seamless marine operation. The engine is specifically configured for jetboat use, ensuring compatibility with marine environments, including corrosion resistance, cooling system adaptations, and power delivery optimization suited for high-performance watercraft. Delivery of the complete engine platform, including all supporting hardware and subsystems, is a core requirement of the agreement. The opportunity is issued as a subcontract under NAICS code 336310, which corresponds to motor vehicle parts manufacturing, and is posted by the state of Utah with a response deadline of July 30, 2026. The solicitation is accessible via a public link, indicating an open bidding process for qualified vendors. There is no set-aside designation, meaning all eligible entities may respond. The place of performance and point of contact details are not specified in the provided data, but successful bidders will be expected to meet the technical specifications and delivery timelines outlined in the full solicitation documents.
Utah

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 336310
New
SLED
Marine Engine Supply – Airboat MotorThe contract is for the supply of a single marine-rated General Motors LT4 6.2L supercharged engine platform specifically configured for airboat applications, including all required components to ensure full operational readiness in marine environments. The engine must meet rigorous marine standards for durability, corrosion resistance, and performance under demanding conditions typical of airboat operations, with all necessary auxiliary systems, mounts, controls, and safety features included as part of the platform. Delivery of the complete assembly is required to fulfill the scope. This is a subcontract opportunity posted by the state of Utah on July 16, 2026, with a response deadline of July 30, 2026. The NAICS code 336310 indicates the transaction falls under the motor vehicle parts manufacturing sector, aligning with the specialized nature of marine engine systems. The place of performance and point of contact details are not specified, and the contract is not designated for any specific set-aside classification. Interested parties must submit responses through the provided Utah BonfireHub portal.
Utah

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 336310
New
SLED
Boat Motors - (Motor 1 for Airboat Motor) (Motor 2 for Jetboat Motor)The State of Utah Division of Purchasing, acting on behalf of the Division of Outdoor Recreation, is soliciting bids for two marine motors under Invitation for Bid NC26-84: one for an airboat used in search and rescue operations and another for a jet boat. The airboat motor must be delivered by or before September 1, 2026, due to its critical emergency role, while the jet boat motor must be delivered by or before January 5, 2027. Each motor comes with strict technical specifications, including a requirement for a marine-rated GM LT4 6.2L supercharged engine producing 600–700 HP, and each has a budget cap of $29,000 and $38,500 respectively, inclusive of shipping. Bids must meet all specifications and budget limits to be considered responsive, and vendors may bid on one or both motors independently. Awards will be made to the vendor whose proposed delivery date is closest to the preferred date, even if slightly beyond it, if no vendor can meet the deadline. Delivery is F.O.B. Destination Freight Prepaid and Allowed, meaning the vendor retains responsibility for the goods until accepted at the state’s designated location in Utah. The vendor must guarantee pricing until final delivery and acceptance of both motors. Contract compliance requires adherence to Utah-specific statutory requirements, including certification that the vendor does not use products from restricted foreign entities or involve forced labor, participates in the E-Verify system for employment verification, and does not engage in economic boycotts of Israel. The vendor must also comply with Utah’s Government Data Privacy Act and ensure all work product is considered a “work made for hire,” with full ownership transferring to the state upon creation. No subcontracting or assignment is permitted without prior written approval. Inspection and acceptance occur at the delivery site, with the state having up to 30 days post-delivery to verify conformity with specifications; nonconforming items must be corrected or replaced at the vendor’s expense. All proposals must be submitted electronically through Utah’s U3P portal by July 30, 2026, and include required certifications and documentation. The contract will conclude once both motors have been delivered and accepted, and payment will be processed within 30 days of a correct invoice, though no specific remittance or accounting details are provided. The solicitation anticipates multiple awards, with each motor treated as a separate line item, and no mandatory site visit is required.
Utah

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 336310
New
DIBBS
Supply of Piston Ring for Cooper Bessemer Diesel EngineThe contract specifies the procurement and delivery of two used piston rings identified by NSN 2815002781537, intended for use in a Cooper Bessemer diesel engine. These components must be properly packaged and labeled in accordance with military standards to ensure safe handling and traceability throughout transit. The delivery destination is a Department of Defense facility located at Cavalier SFS with the ZIP code 58220-9350, requiring compliance with all DoD logistics and receipt protocols. The procurement is structured as a subcontract under NAICS code 336310, which classifies it within the aerospace product and parts manufacturing sector. The solicitation was posted on July 16, 2026, with responses due by July 27, 2026, allowing potential suppliers a window of eleven days to submit offers, though no specific set-aside classifications or agency point of contact details are provided. The contract is managed through the DLA’s DIBBS system under reference number SPE7L126T839Y.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 336310
New
DIBBS
Defense Injector Assembly SupplyThe contract involves the supply of eight units of Injector Assembly F, identified by NSN 2910016287022, for use in military vehicle or engine systems. These components must meet all applicable defense standards including DFARS and DPAS requirements to ensure compliance with federal procurement regulations and domestic sourcing priorities. The delivery location is specified as Sweihan Air Base in the United Arab Emirates, indicating international operational deployment. The contract is classified as a subcontract under the NAICS code 336310, which corresponds to engine and engine parts manufacturing, and is administered by the Defense Logistics Agency under the Department of Defense. The posting date indicates this opportunity was made available on July 16, 2026, and the award details can be referenced through the provided DIBBS link.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 336310
New
DIBBS
Diesel Engine Parts Kit Supply and AssemblyThe contract requires the procurement, assembly, and packaging of a complete diesel engine parts kit identified by NSN 2815014234752, to be delivered as a single integrated unit with approved corrosion protection and secure containment measures. All components must be meticulously assembled and sealed to ensure readiness for immediate deployment, with strict prohibition against bulk or loose shipping methods to maintain integrity and operational readiness. The work must comply with military-grade standards for durability and environmental resilience, ensuring the kit survives handling, storage, and transit under demanding conditions. This subcontract under NAICS code 336310 is issued by the Department of Defense through the LAND SUPPLIER OPNS ENGINES office, with performance required at New Cumberland, Pennsylvania, ZIP 17070-5002. The solicitation was posted on July 16, 2026, and proposals must be submitted by July 27, 2026. Participation is open under general subcontracting terms without specific set-aside classifications, and all bidders must adhere to precise packaging and handling directives to avoid disqualification. The full details and submission portal are accessible via the provided DIBBS link.
LAND SUPPLIER OPNS ENGINES

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 336310
New
DIBBS
O-RING Manufacturing and SupplyThe contract requires the manufacture and supply of 22 units of an O-RING with part number 675C-30006 and NSN 5331017015098, adhering strictly to military packaging, marking, and hazardous materials communication standards. The work is classified as a subcontract under NAICS code 336310, and the performance location is designated as New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. The solicitation was posted on July 16, 2026, and responses are due by July 27, 2026, with no set-aside provisions specified. The contracting activity is under the Department of Defense through the LAND SUPPLY CHAIN organization, and all deliverables must meet the rigorous compliance requirements expected for military-grade components. The full details and submission portal are accessible via the provided DIBBS link.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 9 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

NAICS: 541330
New
DIBBS
Quality Assurance & Inspection ServicesThe contract requires independent origin inspection and acceptance of manufactured parts to ensure full compliance with engineering drawings, technical specifications, and zero non-conformance standards. Inspectors must verify that all components meet exact quality criteria before acceptance, with no tolerance for defects or deviations. This effort is critical to maintaining the integrity of defense-related supply chains and ensuring that all delivered parts are fit for mission-critical applications. The contract is categorized as a subcontract under NAICS code 541330, associated with the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV. It was posted on July 17, 2026, with responses due by July 29, 2026. The place of performance and specific office location are not detailed, but the work is tied to defense procurement processes managed through the DIBBS system. All parties must adhere to rigorous quality controls and documentation practices to fulfill the zero non-conformance mandate.
Engineering Services

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 493190
New
DIBBS
Government Surplus Property Handling & Repackaging ServicesThe contract seeks services to inspect, validate, repack, and document surplus government property for reuse or resale, ensuring strict adherence to federal labeling standards and chain-of-custody requirements. All activities must maintain regulatory compliance throughout the handling process, with a focus on preserving the integrity and traceability of items from intake to final disposition. This includes accurate documentation and proper packaging to meet federal guidelines, enabling seamless transition of materials into secondary markets or internal reuse programs. The solicitation falls under NAICS code 493190 and is classified as a subcontract, issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The opportunity was posted on July 17, 2026, with responses due by July 29, 2026. While specific location details for performance or contact points are not provided, bidders must be prepared to support operations in alignment with DOD protocols and ensure full transparency in all handling procedures. The work is critical to maximizing the value of surplus assets while maintaining accountability across the federal supply chain.
Other Warehousing and Storage

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332613
New
DIBBS
Precision Machining of Fuel Line ComponentsThe contract involves the precision machining of a slider block intended for use in a fuel line assembly, requiring strict adherence to military specifications, approved technical data packages, and established quality standards. The component must be manufactured to exacting tolerances to ensure reliability and performance in demanding operational environments, with all processes and materials subject to rigorous inspection and documentation protocols. This subcontract falls under NAICS code 332613, indicating it is for other machine shop services, and is being managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The solicitation was posted on July 17, 2026, with responses due by July 29, 2026, and is accessible through the DIBBS platform. There is no set-aside designation specified, meaning the contract is open to all qualified suppliers regardless of business size or status. The place of performance and point of contact details are not provided, suggesting the contractor will coordinate directly with the procuring activity to finalize logistics and deliverables. Full compliance with technical requirements and quality assurance measures is mandatory, and failure to meet these standards may result in rejection or contract termination.
Spring Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541380
New
DIBBS
First Article Testing (FAT) ServicesThe contract seeks specialized First Article Testing services for a military duct assembly, requiring full compliance with Department of Defense standards, including the proper execution of tests and submission of documentation such as DD Form 250. The work must be performed by a qualified small business as this is a Total Small Business Set-Aside under FAR 19.5, classified under NAICS code 541380 for other scientific and technical consulting services. All testing activities must align with military specifications and deliverables to ensure the duct assembly meets required performance, safety, and quality benchmarks before production. The solicitation, issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, has a response deadline of July 29, 2026, and is accessible via the DIBBS platform. The place of performance and physical address details are unspecified, indicating flexibility in location, but the work must be completed in accordance with federal contract requirements. The contract structure is a subcontract, meaning the selected vendor will likely work under a prime contractor to supply certified test results and documentation critical to the military supply chain.
Testing Laboratories and Services

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
Supply of Military Duct AssemblyThe contract requires the manufacture, testing, packaging, and delivery of 39 military-grade duct assemblies identified by NSN 1660-00-799-5861, all of which must adhere strictly to applicable military specifications. Each unit must undergo First Article Testing to verify compliance with design and performance requirements, and must be uniquely identified with IUID marking to ensure traceability across the Defense Logistics Agency’s inventory system. The work is solicited as a subcontract under a Total Small Business Set-Aside, meaning only small business concerns certified by the SBA are eligible to respond, and the NAICS code 332999 indicates the performance falls under Other Miscellaneous Fabricated Metal Product Manufacturing. The solicitation was posted on July 17, 2026, with a response deadline of July 29, 2026, and the contracting office is the ASC Supplier Oper AE and AF Division within the Department of Defense. All delivered items must be ready for immediate integration into military systems, with no deviation from the stated technical and administrative requirements.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332721
New
DIBBS
Precision Manufacturing of Threaded Tapered Pins (Critical Application Item)The contract requires the manufacture and supply of precision-machined tapered threaded pins designated as P/N AN386-3-16A and NSN 5315-00-265-9892, classified as a Critical Application Item due to their essential role in military systems. All components must strictly comply with applicable military specifications, ensuring dimensional accuracy, material integrity, and performance under demanding operational conditions. Rigorous quality control protocols are mandated, including full traceability of raw materials through every production stage, with documentation verifying origin, processing, and inspection results. Each unit must undergo inspection and certification to confirm adherence to technical requirements and avoid any risk of nonconformance. The solicitation, issued under the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, is structured as a subcontract and falls under NAICS code 332721 for machine shops. The response deadline is set for July 21, 2026, with the posting date on July 17, 2026. Place of performance details are unspecified, but the requirement for traceability and origin inspection implies that manufacturing and inspection activities must occur within approved facilities capable of meeting defense standards. The lack of a set-aside designation suggests this opportunity is open to all qualified suppliers, with the emphasis squarely on technical compliance, documentation rigor, and proven capability in producing mission-critical aerospace and defense hardware.
Precision Turned Product Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 3 days
View Details
NAICS: 332813
New
DIBBS
Specialized Material Supply and ProcessingThe contract calls for the supply of alloy steel and corrosion-resistant materials alongside specialized processing services including heat treatment, plating, anodizing, and welding, all requiring full documentation, certification, and traceability to ensure compliance with stringent quality standards. The materials and services are intended to meet precise technical specifications critical for defense and aerospace applications, with all work subject to rigorous inspection and adherence to industry-approved protocols. Issued under the NAICS code 332813 for forge shops and foundries, this subcontract is managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with responses due by July 24, 2026. The work is expected to be performed without geographic restriction specified, and all deliverables must be accompanied by comprehensive records verifying material origins, processing steps, and final inspections to ensure full accountability and readiness for military use.
Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 541380
New
DIBBS
First Article Testing and Certification ServicesThe contract solicits independent testing and certification services for the first article unit, requiring comprehensive dimensional inspection, material verification, and nondestructive testing in compliance with ASTM-E1417 standards. The work must be performed to.validate conformance to technical specifications prior to formal acceptance, with all findings and documentation submitted to Hill Air Force Base. This subcontract is categorized under NAICS code 541380, indicating it falls within the scientific and technical consulting services sector, and is issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The solicitation was posted on July 17, 2026, with a response deadline of July 24, 2026, requiring proposers to submit their offerings within this seven-day window. Performance is expected to be conducted in accordance with federal contracting requirements, though the specific place of performance and point of contact details are not provided.
Testing Laboratories and Services

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332721
New
DIBBS
Precision Manufacturing of Quick Release Pin ReceptacleThe contract calls for the precision machining and production of a quick release pin receptacle designated by NSN 5342-01-049-0333, manufactured to strict military specifications with full compliance to all applicable effectivity bullets and MIL-STD-130 marking requirements. The component must meet all first article inspection criteria to ensure dimensional accuracy, material integrity, and functional performance in demanding operational environments. Production must be executed under a subcontracting arrangement, with adherence to defense procurement protocols governing quality assurance, traceability, and documentation. The solicitation was posted on July 17, 2026, with a response deadline of July 24, 2026, and falls under NAICS code 332721 for metal forging and stamping. The contracting organization is the ASC SUPPLIER OPER AE AND AF DIV within the Department of Defense, indicating direct relevance to military supply chain operations. Although no specific place of performance or point of contact is detailed, the requirement implies that all work must be performed by qualified suppliers capable of meeting defense-grade manufacturing standards and delivering fully compliant hardware on schedule.
Precision Turned Product Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332999
New
DIBBS
Supply of Blind Rivets (NSN 5320-00-883-9393)The contract entails the manufacture and delivery of exactly 70 units of a specific blind rivet identified by NSN 5320-00-883-9393, under a firm fixed-price arrangement, ensuring cost certainty for both parties. All items must comply with mandatory military packaging and labeling specifications to meet Department of Defense standards for readiness and logistics. The work is procured as a subcontract under NAICS code 332999, indicating it falls under other miscellaneous fabricated metal product manufacturing, and is managed by the ASC SUPPLIER OPER AE AND AF DIV under the broader Department of Defense. The solicitation was posted on July 17, 2026, with responses required by July 21, 2026, establishing a tight, four-day window for submission. The place of performance and point of contact details are not specified, but the official solicitation is accessible via the DIBBS platform for further procurement details.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 3 days
View Details
NAICS: 484220
New
DIBBS
Domestic and International Freight LogisticsThe contract involves the transportation of manufactured units from their origin to designated government destinations, encompassing both domestic trucking and potential international ocean freight services. All logistics operations must strictly comply with U.S. cargo preference laws, ensuring compliance with federal requirements for the use of U.S.-flagged vessels and domestic carriers where applicable. The work is classified as a subcontract under NAICS code 484220, which pertains to truck transportation for moving goods, and is issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. Responses are due by July 19, 2026, with the solicitation posted on July 17, 2026, and all performance activities are tied to government-controlled endpoints without specified geographic limitations.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 15 hours ago

DEADLINE

in 1 day
View Details
NAICS: 326199
New
DIBBS
Specialized Packaging and PreservationThis contract mandates the application of military-compliant preservation and packaging standards in strict accordance with MIL-STD-2073-1E and MIL-STD-129R, ensuring that all items are protected for long-term storage and transportation under demanding conditions. The required procedures include vacuum sealing to eliminate moisture and contaminants, the inclusion of appropriate desiccants to maintain low humidity levels within packaging, and the placement of Type I (Code U) shelf-life labels that clearly indicate the expiration and storage requirements for the preserved items. These measures are essential to maintain the operational readiness and integrity of defense-grade equipment and components throughout their designated service life. The contract is structured as a subcontract under the NAICS code 326199, which corresponds to other plastic product manufacturing, and is managed by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense. The solicitation was posted on July 17, 2026, with a firm response deadline of July 19, 2026, indicating a tight turnaround for qualified vendors to submit proposals. The place of performance and point of contact details are unspecified, leaving full responsibility for logistics and coordination to the subcontractor. Compliance with all technical specifications and labeling requirements is mandatory, and failure to meet these standards may result in rejection of delivered goods or contract termination.
All Other Plastics Product Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 1 day
View Details