Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

BLOCK AND TACKLE

Active
SPE8EE-26-T-2098Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of 15 units of a BLOCK AND TACKLE item identified by NSN 3940-01-429-8206 and part number 12365945, issued under solicitation SPE8EE-26-T-2098 by the Department of Defense through the Defense Logistics Agency. Delivery is required within 163 days to the destination facility in New Cumberland, Pennsylvania, with FOB Origin terms and zero tolerance for quantity variance. The item must conform to MIL-STD-2073-1E packaging standards, including specific preservation methods and labeling per MIL-STD-129 with no special marking required. All packaging and palletization must comply with DLA’s official packaging requirements, and the product is subject to inspection and acceptance at the destination point. Sampling for quality assurance must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances permitted unless otherwise specified, and attributes are to be classified with specified verification levels or AQLs. The supplier must also adhere to cybersecurity requirements by completing a CMMC Level 2 self-assessment and ensure compliance with DLA’s master list of technical and quality requirements referenced by R and I numbers. The contract specifies that the seller is responsible for preparing the item for shipment and providing accurate marking and documentation in alignment with all applicable military and DLA directives.

General Info

Defense Logistics Agency seeks 15 Block and Tackle units via solicitation due July 20, 2026.

Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT MANU & CONView Agency

NAICS

332618 - Other Fabricated Wire Product ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

Request for Quotations SPE8EE-26-T-2098

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

1 update
PhaseSolicitation
Posted

Solicitation

Amendment 1

Contract was updated

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON
View Agency Profile
Office AddressUS
Contacts
Philip Ferrara
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BLOCK AND TACKLE
BLOCK AND TACKLE
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment
CRITICAL APPLICATION ITEM
U S ARMY TANK AUTOMOTIVE COMMAND 19207 P/N 12365945
AMZ ALABAMA INC. 076M6 P/N 12365945
SPE8EE-26-T-2098
SECTION B
PR: 7017444038 PRLI: 0001 CONT’D
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017444038 0001 EA 15.000
NSN/MATERIAL:3940014298206
DELIVERY (IN DAYS):0163
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:10 OPI:M
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:00/00/0000 Original Required Delivery Date:07/09/2026
SPE8EE-26-T-2098
SECTION B
PR: 7017444038 PRLI: 0001 CONT’D
SPE8EE-26-T-2098 NSN/Part Number: 3940-01-429-8206 Quantity: 15 EA Purchase Request: 7017444038QTY: 15 Delivery: 163 days ADO

Similar Contracts

NAICS: 332618
New
DIBBS
PIN, COTTERThe contract is for the procurement of 33 cotter pins identified by NSN 5315-00-288-2478 and part number MS24665-1011, issued under solicitation SPE4A6-26-T-05HQ by the Department of Defense’s ASC Commodities Division. The items are classified as commercial and must comply with military specifications NASM24665 and ASME B18.8.1, revision dated January 14, 2015, with a required revision date of December 31, 2025. All units must be manufactured and inspected at origin, with zero non-conformances accepted under sampling standards MIL-STD-1916 or ASQ H1331, and no variance is permitted in quantity. Inspection and acceptance occur at origin, with packaging required to meet MIL-STD-2073-1E and marking per MIL-STD-129. Mercury and mercury-containing compounds are strictly prohibited in the product, preservation, packaging, and marking, except for specific exempted uses such as batteries or sensors as defined by NAVSEA, and any portable devices containing mercury must have double containment. The items are to be delivered FOB origin within 169 days, with three separate line items for delivery to DLA Distribution San Diego, Cherry Point, and Tinker AFB, each with identical packaging and marking requirements. The need-to-ship date is January 6, 2027, and the original delivery deadline is March 28, 2027. The contract enforces DLA’s standardized packaging requirements and prohibits any intentional introduction of mercury in any supply chain activity.
ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332618
New
DIBBS
PIN, STRAIGHT, HEADEDThe contract is for the procurement of 43 straight headed pins with NSN 5315-01-564-4969 under solicitation number SPE4A6-26-T-05KB, issued by the ASC Commodities Division of the Department of Defense. The items must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with revisions in effect on the solicitation issue date controlling for this simplified acquisition. Delivery is required within 166 days of award, with performance occurring in San Diego, California, zip 92136-3581. The solicitation was posted on July 12, 2026, and responses are due by July 20, 2026, under NAICS code 332618. Any non-accepted supplies must have government identification removed prior to return, and all documentation must adhere to DLA packaging requirements. Primary point of contact is Christina Pyle, reachable via email or phone, with additional details available through the DIBBS portal.
ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332618
New
DIBBS
PIN, STRAIGHT, HEADLEThe contract pertains to the procurement of two straight headless pins identified by NSN 5315-01-552-3845 under solicitation SPE4A6-26-T-05JM, issued by the Department of Defense’s ASC Commodities Division. The items are to be delivered within 20 days after award, with a response deadline of July 20, 2026, and are being acquired through full and open competition in accordance with established military and federal specifications. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. Packaging must comply with DLA standards, government identification must be removed from non-accepted supplies, and bare items must be physically marked according to specified criteria. The contract also includes provisions related to covered defense information, ensuring appropriate handling and safeguarding measures. All correspondence and inquiries should be directed to Samantha Hopkins at the provided contact details.
ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332618
New
DIBBS
ROPE, WIREThe contract pertains to the procurement of two units of wire rope with part number CL-3-C-15.0, supplied by CARR LANE MANUFACTURING COMPANY, identified by CAGE code 99862 and NSN 4010-01-447-3420. Delivery is required within 20 days of award, and the solicitation number is SPE4A5-26-T-284G with a response deadline of July 20, 2026. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible via the official DLA website, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger procurements, unless an amendment supersedes it. Sampling and inspection procedures must follow MIL-STD-1916 or ASQ H1331 Table 1 or an equivalent zero-based sampling plan, with specified attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 for critical, major, and minor characteristics respectively; unspecified attributes are treated as major. Zero non-conformances are required in the sample unless otherwise stated, and MIL-STD-105/ASQ Z1.4 may be used only for determining sample size, not acceptance criteria. Government identification must be removed from non-accepted supplies. The contract is issued by the Department of Defense, under the ASC Supplier Oper OEM Division, with performance located at Davis-Monthan AFB, Arizona, and primary point of contact is Hien-Van Trinh.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332618
New
DIBBS
PIN, SHOULDER, HEADLEOfferors must comply with strict domestic content requirements under the Berry Amendment and Buy American Act, with the Berry Amendment threshold lowered to $150,000, requiring full disclosure of any non-domestic materials used in the quoted item. The solicitation prohibits the inclusion of covered telecommunications equipment or services as defined by FAR 52.204-24 and DFARS 252.204-7016, and no items produced via additive manufacturing may be submitted unless prior approval is granted. Offerors are strongly encouraged to provide quantity ranges in their quotes to accommodate fluctuating demand and avoid administrative delays, though this does not apply to Auto IDC. Small business joint ventures must submit all applicable certifications under FAR provisions 52.212-3 and 52.219-1 for the categories of small business, service-disabled veteran-owned, WOSB, economically disadvantaged WOSB, or HUBZone. All contractors must register through DLA’s new AMPS system within two months to gain access to the Vendor Shipment Module, with VSM WebServices users required to update their schema by the specified deadline. Failure to register or update systems will result in loss of shipping capability. Offers must not include covered telecommunications equipment, and any non-domestic content must be disclosed directly to the point of contact. Fast Pay is not applicable. Offerors anticipating a late quote must submit a “No Bid” on DIBBS with an anticipated quote date or reason to avoid misclassification of the requirement as non-procurable. The item in question is a PIN, SHOULDER, HEADLE with NSN 5315-01-702-2864, quantity one, delivery due in 20 days, and the solicitation closes on July 20, 2026.
ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details