This Solicitation opportunity from Department Of Defense was posted on May 29, 2015. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Board Assemblies/Insulator Plates

Closed

N00253-15-T-0321Federal

Submission Closed05/21/2015, 04:59:59 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

Solicitation # SPRMM126QHD57

Solicitation SPRMM126QHD57, issued by DLA Mechanicsburg for the Department of the Navy, is a small business set-aside request for the manufacture and delivery of an oscilloscope, NSN 6625-01-716-1472. The required item must conform to the design represented by Cage Code 82199 and reference number MX04-B2410, utilizing TDP Version 004. Award will be granted to the responsible offeror submitting the lowest priced, technically acceptable offer, with evaluations considering item, price, and supplier risk via the Supplier Performance Risk System. Offerors acting as distributors must provide signed proof of authorization on company letterhead. The contract mandates strict adherence to quality and marking standards, specifically MIL-STD-130 Rev N for physical identification and MIL-STD-2073-1 for preservation and packaging. Inspection and acceptance will occur at the origin, with the contractor remaining responsible for all inspection requirements and maintaining records for 365 days post-delivery. Additionally, contractors must provide supply chain traceability documentation to be retained for ten years after final payment to prevent counterfeit electronic parts. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system.

SPRMM1 DLA Mechanicsburg

POSTED

DEADLINE

Solicitation # N0010427QSA07

This solicitation, number N00104-27-Q-SA07, is a total small business set-aside for the repair, teardown, evaluation, and modification of a Circuit Card Assembly (NSN 5998-01-497-0008). The government is seeking a Repair Turnaround Time (RTAT) of 88 days, measured from the physical receipt of the asset to the date of acceptance. Failure to meet this RTAT will result in a price reduction of 1% of the unit price per month of unexcused delay. The award will be issued bilaterally and requires the contractor's written acceptance. Government Source Inspection (GSI) is mandatory, and final inspection and acceptance will occur at the contractor's location. The evaluation process prioritizes past performance over price, with offerors lacking relevant history receiving a neutral rating. Technical execution must adhere to original manufacturer specifications and TDP Version 010, with physical identification following MIL-STD-130. Packaging must comply with MIL-STD-2073-1 for system stock and OCONUS shipments, while CONUS shipments may use ASTM D3951-18 with approval. Shipping is FOB Origin, and the government handles freight via the Commercial Asset Visibility (CAV) system. The contract also includes an option for increased quantity to be exercised within 365 days after receipt of the assets.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Printed Circuit Board (PCB) Fabrication and AssemblyThis subcontract involves the fabrication and assembly of Printed Circuit Boards for the DLA Weapons Support Maritime Supply Chain. The scope of work includes fabricating circuit board substrates, sourcing components, and performing population for Cummins MDC 08HV8 P/N A046K336. The project requires the delivery of four completed and tested PCBs under NSN 5998017230342, with all work performed in New Cumberland. The contractor must strictly adhere to the DLA Master List quality requirements and maintain DFARS cybersecurity standards. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 334412. The response deadline for this Department of Defense requirement is November 5, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Supply of Circuit Card Assembly (NSN 5998016301891)This subcontract involves the manufacture or procurement of five Circuit Card Assemblies, specifically NSN 5998016301891 and Mainstream Engineering Corp part number 5005140, for prime contractors supporting the DLA Weapons Support Maritime Supply Chain. The project falls under NAICS code 334412 and requires all units to be marked in strict accordance with MIL-STD-129 standards. The contractor is responsible for delivering the properly marked and packaged assemblies to a designated government shipping point under FOB Origin terms. Performance for this Department of Defense requirement is centered in New Cumberland, Pennsylvania, with a response deadline set for November 5, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Supply of Rational International AG Circuit Card AssembliesThis subcontract involves the manufacture or procurement of five completed and tested Rational International AG C4240 circuit card assemblies, specifically part number 42.00.260P. These components are destined for prime contractors supporting the DLA Weapons Support Maritime Supply Chain. All deliverables must strictly adhere to the DLA Master List technical and quality requirements RA001 and comply with DFARS 252.225-7001. The contract mandates strict adherence to DFARS 252.204-7012 regarding the safeguarding of covered defense information. Performance for this requirement is centered in Tracy, California. Interested parties must respond by November 5, 2026, to fulfill the needs of the Department of Defense under NAICS code 334412.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Printed Circuit Board (NSN: 5998016086337) SupplyThis subcontract involves the supply of Printed Circuit Boards, specifically NSN 5998016086337, for prime contractors supporting the Defense Logistics Agency Weapons Support Maritime Supply Chain. The scope of work includes the manufacture or sourcing of the boards, with the possibility of utilizing additive manufacturing production provided that ESA approval is obtained. All deliverables must adhere to strict military specifications, including marking per MIL-STD-129, packaging per MIL-STD-2073-1E, and RP001 palletization standards. The contract falls under NAICS code 334412 and is managed by the Department of Defense. Performance of the contract is designated for New Cumberland, Pennsylvania. Interested parties must note the response deadline of November 5, 2026, to ensure all requirements for the physical delivery of the marked and packaged PCBs are met.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

PRINTED CIRCUIT BOARD

Solicitation # SPE7M1-27-T-1555

Solicitation SPE7M1-27-T-1555 is a total small business set-aside issued by the DLA Weapons Support Maritime Supply Chain for the procurement of four printed circuit boards, specifically Cummins MDC 08HV8 part number A046K336, identified by NSN 5998017230342. The requirement falls under NAICS code 334412. The original required delivery date and need ship date are both set for August 23, 2027, with a delivery lead time of 290 days after award. Supplies are to be delivered to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, with both inspection and acceptance occurring at the destination. The contract mandates strict adherence to technical and quality requirements found in the DLA Master List and requires packaging and palletization in accordance with MIL-STD-2073-1E and RP001. Marking must comply with MIL-STD-129. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and registration via the Account Management and Provisioning System for shipping. Key regulatory compliance includes the Buy American Act, DFARS cybersecurity standards for safeguarding covered defense information, and prohibitions on covered defense telecommunications equipment. This procurement may be eligible for automated award, and offerors are encouraged to provide quantity ranges in their quotes.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

CIRCUIT CARD ASSEMBLY

Solicitation # SPE7M1-27-T-1575

Solicitation SPE7M1-27-T-1575 is a federal procurement issued by the Defense Logistics Agency (DLA) Weapons Support Maritime Supply Chain for the acquisition of five circuit card assemblies, specifically Rational International AG C4240 part number 42.00.260P (NSN 5998124145419). The contract is not a small business set-aside and falls under NAICS code 334412. The required delivery date is May 23, 2027, with a delivery lead time of 198 days after receipt of order. Delivery is FOB destination to DLA Dist San Joaquin in Tracy, California. The contract mandates strict adherence to technical and quality requirements found in the DLA Master List, including RP001 for packaging and RQ011 for the removal of government identification from non-accepted supplies. Packaging must comply with MIL-STD-2073-1E and marking must follow MIL-STD-129. Inspection and acceptance will occur at the destination per FAR 52.246-2. Key regulatory clauses include DFARS 252.225-7001 regarding the Buy American and Balance of Payments Program and DFARS 252.204-7012 for safeguarding covered defense information. Invoicing and payment must be processed electronically through the Wide Area WorkFlow (WAWF) system.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

TEST PROBE ATTACHMENT

Solicitation # SPE7M1-27-T-1553

Solicitation SPE7M1-27-T-1553 is a procurement request by the Defense Logistics Agency Weapons Support Maritime Supply Chain for two test probe attachments, identified by NSN 6625016186357. The requirement is for a quantity of two units with a required delivery date of May 8, 2027. Delivery is established as FOB Origin under the First Destination Transportation program, with the shipping destination being DLA Distribution San Joaquin in Tracy, California. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to DLA packaging requirements, specifically RP001 for palletization and MIL-STD-129 for marking and labeling. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements, which takes precedence over ASTM D3951. Environmental and safety restrictions prohibit the intentional addition of mercury and the use of Class I ozone-depleting substances. If the items are classified as hazardous under FED-STD-313, the offeror must provide a Safety Data Sheet and OSHA hazard communication label at the time of the quote and follow TQ requirement IP025 for packaging. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with the Buy American and Balance of Payments Program for quotes exceeding the micro-purchase threshold. Offerors must submit quotes through the DIBBS portal and provide representations regarding their business size status under NAICS code 334412. Additionally, the contract incorporates cybersecurity reporting under DFARS 252.204-7012 and requires representations regarding the use of covered defense telecommunications equipment or services.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

PRINTED CIRCUIT BOARD

Solicitation # SPE7M1-27-T-1546

Solicitation SPE7M1-27-T-1546 is a request for quotations issued by the DLA Weapons Support Maritime Supply Chain for the procurement of three printed circuit boards, identified by NSN 5998-01-608-6337. The requirement is not a small business set-aside and falls under NAICS code 334412. The items are intended for HDT Expeditionary Systems Inc, with a required delivery date of August 21, 2027. Delivery is specified as FOB Origin, while inspection and acceptance will occur at the destination in New Cumberland, Pennsylvania. The contract mandates strict adherence to quality and technical standards, including CMMC Level 2 self-assessment, MIL-STD-129 for marking, and MIL-STD-2073-1E for packaging. Palletization must comply with DLA requirement RP001. Additionally, the contractor must provide technical data to verify electrostatic sensitive device and electromagnetic interference requirements. Compliance with the Buy American Act and DFARS 252.225-7001 is required for quotes exceeding the micro-purchase threshold. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

SEMICONDUCTOR DEVICES,

Solicitation # SPE7M5-27-T-1539

Solicitation SPE7M5-27-T-1539 is a request for quotations from the DLA Weapons Support Active Devices Division for the acquisition of unitized semiconductor devices, specifically NSN 5961-00-445-4380. This is a Foreign Military Sales requirement for Greece, with a total quantity of 658 units at a unit price of 37.94, totaling approximately 24,965.72. The delivery is required within 5 days after receipt of the order, with shipping, inspection, and acceptance all set as FOB Origin. The procurement is not a small business set-aside and is associated with NAICS code 334412. The contract mandates strict adherence to technical and quality requirements, including supply chain traceability documentation and qualification via the Qualified Suppliers List of Distributors (QSLD) and Qualified Testing Suppliers List (QTSL). Packaging and preservation must comply with MIL-DTL-19491 and MIL-STD-2073-1E, while shipment marking must follow MIL-STD-129. Key regulatory compliance includes the Buy American Act, DFARS cybersecurity standards for safeguarding covered defense information, and representations regarding prohibited telecommunications equipment. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

DEADLINE

CIRCUIT CARD ASSEMBLY

Solicitation # SPE7M1-27-T-1556

Solicitation SPE7M1-27-T-1556 is a federal procurement issued by the DLA Weapons Support Maritime Supply Chain for the acquisition of five circuit card assemblies, identified by NSN 5998016301891 and Mainstream Engineering Corp part number 5005140. The contract requires delivery by March 12, 2027, with terms set as FOB Origin. Inspection and acceptance will occur at the destination, specifically the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The procurement is not a small business set-aside and falls under NAICS code 334412. Compliance requirements are extensive, including adherence to MIL-STD-129 for marking and MIL-STD-2073-1E for packaging, with palletization following DLA requirement RP001. The contractor must comply with CMMC Level 2 self-assessment standards and various FAR and DFARS clauses, including the Buy American Act, safeguarding of covered defense information, and hazardous material labeling per 29 CFR 1910.1200. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. All quotes are to be submitted via the DLA Internet Bid Board System.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 22 hours ago

DEADLINE

in 10 days

General Info

Agency

Department Of Defense → Naval Undersea Warfare Center

Contract Value

$3,250

NAICS

334412 - Bare Printed Circuit Board Manufacturing

Place of Performance

KEYPORT, WA, 98345, USA

Set-Aside

SBA

Awardee

CALTRONICS CIRCUITS, LLC

Award Issued Date

07/23/2015, 12:00:00 AM UTC

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedMay 6

Presolicitation

Response DeadlineMay 21

Deadline has passed

Type ChangedMay 29

Presolicitation → Solicitation

Submission Closed

05/21/2015, 04:59:59 AM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → Naval Undersea Warfare Center

Contacts1 person available

OfficeKEYPORT, WA, 98345-7610, USA

Organization / AgencyDepartment Of Defense → Naval Undersea Warfare Center

Office AddressKEYPORT, WA, 98345-7610, USA

Contacts

Adrianne Y. Opie

contact@example.gov

+1 (555) 000-0000

Full Description

Naval Undersea Warfare Center (NUWC) Division Keyport is soliciting ten (10) each Board Assemblies and ten (10) each Insulator Plates in accordance with Drawing Number 2159557 and Gerber Files. Offerors will need to be Joint Certification Program (JCP) certified in order to view the drawings posted in FBO as they are Arms Export Control Drawings. Based upon market research, the Government is not using the policies contained in Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies or services. However, interested persons may identify to the contracting officer their interest and capability to satisfy the Government's requirement with a commercial item within 5 days of this notice. This requirement is being issued as synopsis for non-commercial items in accordance with FAR 13.1. The Defense Priorities and Allocations System (DPAS) applicable assigned rating for this requirement is DO-C9. The solicitation number for this requirement is N00253-15-T-0321. It is anticipated the resultant purchase order will be firm-fixed price. The proposed contract is 100% set aside for small business concerns. Applicable NAICS code for this requirement is 334412 and has a size standard of 500 employees. Offerors are required to provide FOB Destination pricing to NUWC Keyport, WA 98345-7610. Requirements and evaluation procedures will be listed in the solicitation, which is required to be completely filled out and returned before the solicitation closes. All questions regarding this solicitation should be submitted in writing as soon as practicable after receipt of solicitation. Questions should be submitted via e-mail to: Adrianne.opie@navy.mil or faxed to (360) 396-7036. No paper copies will be mailed. Failure to respond to this RFQ and associated amendments if applicable prior to the closing date and time established may render an offer non-responsive and result in rejection. It is anticipated the solicitation and drawings will be available for download on or about March 26th 2015. The closing date of the solicitation is anticipated to be April 9th 2015. Provisions and clauses in effect through the latest Federal Acquisition Circulars are included in the solicitation. To access the clauses/provisions to be completed, download the Federal Acquisition Regulations at http://acquisition.gov/far/. Download the Defense Federal Acquisition Regulations (DFARS) at: http://www.acq.osd.mil/dpap/dars/index.html. The offeror must have a current registration and completed representations and certifications in the System for Award Management (SAM) at website https://www.sam.gov/portal/public/SAM/ a Federal government owned website that consolidates the capabilities in CCR/FedReg, ORCA, and EPLS.