BOARD, FLOOR TRAILER

BOARD,FLOOR TRAILER
FLOORBOARD, WOOD. PER CITED DRAWING WITH
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
THE FOLLOWING EXCEPTIONS.
1. SPECIES: White Oak species. MINIMUM AVERAGE WEIGHT OF APITONG TO BE 47 PCF WITH NO PIECE LESS THAN 42 PCF.
2. MOISTURE CONTENT: 22% MAXIMUM.
3. SURFACING: S2S. SQUARE EDGED.
4. SIZE (SURFACED, DRY) IN INCHES: THICKNESS; 1-3/8<(>,<)> WIDTH; 7-1/2<(>,<)> LENGTH; 39 FEET, 3-1/4 INCHES (OVERALL). ITEM MAY BE SUPPLIED AS SHORTER<(>,<)> FULL-WIDTH PIECES. PIECES SHALL BE CUT SO THAT ENDS WILL BE SUPPORTED BY CROSSMEMBERS BUT IN NO CASE LESS THAN 4 FEET IN LENGTH.
5. EACH SET OF PIECES TO BE STRAPPED. METAL OR PLASTIC EDGE PROTECTORS REQUIRED W/STEEL STRAP.
6. CROSSMEMBER SPACING, END-TO-END, IN INCHES: 18 3/16;16 (SIX TIMES);12;10;12;16 (19 TIMES); 19 1/16. (TOTAL = 39' 3 1/4")
7. BOARDS TO BE WATER-REPELLENT PRESERVATIVE TREATED. PRESERVATIVE SHALL NOT CONTAIN CHLORINATED PHENOLS. USED ON M872 SERIES SEMITRAILERS.
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE USED NOR INCORPORATED IN ANY ITEMS TO BE DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS. SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR APPROVAL UNLESS THEY ARE AUTHORIZED BY THE SPECIFICATION REQUIREMENTS.
FULL AND OPEN COMPETITION APPLY
DETAILED DRAWING (ONE ITEM)
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
SPE7L1-27-T-2381
SECTION B
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
CRITICAL APPLICATION ITEM
VALLEY WOODCRAFT & LUMBER CO., INC. 0M312 P/N FC-6872-4
IAW REFERENCE
REVISION NR DTD
PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018689995 0001 EA 1.000
NSN/MATERIAL:2510010672630
DELIVERY (IN DAYS):0010
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W58QRC
W6YT USALRCTR FT LEONARD
TRANS FREIGHT BRANCH
391 GAS STREET
FORT LEONARD WOOD MO 65473-5000
US
SPE7L1-27-T-2381
SECTION B
PR: 7018689995 PRLI: 0001 CONT’D
RDD(3-POS RDD)/ANMCS SHIPMENT. SHIP BY FASTAST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W58AJ9
W1D7 58TH TRANS BN
292 ORDINANCE DRIVE
FORT LEONARD WOOD MO 65473-8947
US
MARKFOR
W58AJ9
W1D7 58TH TRANS BN
292 ORDINANCE DRIVE
FORT LEONARD WOOD MO 65473-8947
US
M/F: (TCN) W58AJ962800085
RDD: E
PROJ: TP 2
SUPP ADD: W58NQ5 SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 06
DIC: A3A DIST: ADV: FC: 71
Need Ship Date:00/00/0000 Original Required Delivery Date:10/13/2026
SPE7L1-27-T-2381 NSN/Part Number: 2510-01-067-2630 Quantity: 1 EA Purchase Request: 7018689995QTY: 1 Delivery: 10 days ADO