Top

FURNISH AND INSTALL UTILITY BED, UPFIT FOR 2026 FORD 350 HURON LINE CREW SEE ATTACHED SALIENT CHARACTERISTICS, EO 14398

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

Department of Energy → Western Area Power Administration

NAICS

336211 - Motor Vehicle Body Manufacturing

Place of Performance

TX, USA

Set-Aside

SBA

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 18

forecast

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

AgencyDepartment of Energy → Western Area Power Administration

Contacts2 people available

OfficeN/A

Organization / AgencyDepartment of Energy → Western Area Power Administration

Office AddressN/A

Contacts

Small Business Program Manager

contact@example.gov

Small Business Program Manager

contact@example.gov

Full Description

FURNISH AND INSTALL UTILITY BED, UPFIT FOR 2026 FORD 350 HURON LINE CREW SEE ATTACHED SALIENT CHARACTERISTICS, EO 14398

Similar Contracts

Same NAICS industry code

NAICS: 336211

New

DIBBS

INSULATION, VEHICULAR

Solicitation # SPE7L1-27-U-0007

Solicitation SPE7L1-27-U-0007 is a Request for Quotations issued by the Department of Defense, DLA Land and Maritime, for the procurement of vehicular insulation, specifically NSN 2540-01-491-1425 and Oshkosh Defense LLC part number 3290980. This non-small business set-aside is for a unilateral Simplified Indefinite-Delivery Contract with a maximum value of 350,000.00 dollars. The estimated annual quantity is 31 units, though this is an estimate and not a guaranteed purchase. The delivery requirement is 80 days after order with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. The contract mandates strict adherence to DLA packaging requirements, specifically RP001 for palletization and MIL-STD-129 for marking and labeling, with the DLA Master List of Technical and Quality Requirements taking precedence over ASTM D3951. Offerors must comply with domestic sourcing restrictions, including the Buy American Act and the Berry Amendment, and must disclose any use of non-domestic materials. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment. The award will be granted to a responsible offeror based on price evaluation of quotes submitted through the DIBBS portal.

POSTED

DEADLINE

All-Aluminum Animal Control Box SupplyThis subcontract agreement involves the manufacture and supply of two specialized all-aluminum animal control boxes for prime contractors working on Kenton County Public Works projects. The units must be constructed according to Jackson Creek Model CM17L specifications, featuring interior safety doors, ergonomic escape-proof latches, and a curbside side-lift compartment operated by a box-mounted switch. All deliverables must strictly adhere to Federal Motor Vehicle Safety Standards. The procurement process is managed by the Kentucky Public Works agency under NAICS code 336211. Interested parties must submit their responses by the deadline of October 30, 2026.

POSTED

DEADLINE

Animal Control Truck Upfits

Solicitation # 27-11

Kenton County Public Works is soliciting bids under solicitation number 27-11 for the purchase, installation, and delivery of two animal control upfits for 2026 Chevrolet Silverado 3500HD SRW trucks. The county requires either Jackson Creek Model CM17L units or an approved equivalent. These upfits must be constructed from all-aluminum to ensure durability, ease of sanitization, and a professional appearance. Key technical requirements include high-efficiency LED interior lighting wired to factory switches, the reinstallation of the factory rear camera, and the inclusion of one #222 Pet Step Folding Ramp per unit. Vendors are encouraged to provide advanced climate control integration, ergonomic escape-proof latches, and structural framing that minimizes vibration wear. The contract will be awarded to the lowest responsible bidder who meets all specifications. Bidders must submit their proposals by October 30, 2026, and provide a W-9, Certificate of Insurance, and a Kenton County Occupational License. All installations must certify compliance with Federal Motor Vehicle Safety Standards (FMVSS) and be delivered fully operational to the Public Works facility in Independence, Kentucky. Contractors must also adhere to the Kentucky Human Rights Act, the Employment Discrimination Act, and OSHA regulations. The county reserves the right to accept or decline credits for the removal of factory-installed beds.

POSTED

DEADLINE

Fabrication and Installation for Four (4) Transportation Vans

Solicitation # 060-3143802-MB

The County of Orange Sheriff-Coroner is soliciting bids for the fabrication and installation of custom prisoner containment cells and accessories for four transportation vans under solicitation number 060-3143802-MB. This firm fixed fee contract requires a full build, including the installation of security partitions made from 16-gauge metal and 3/8 Lexan, as well as specialized equipment such as tri-color LED flashers, covert anti-theft systems, and carpeted maple wood electronics boards. The contract is intended to run from November 1, 2026, through October 31, 2029, with performance taking place in Santa Ana, California. Bids must be submitted electronically via the OpenGov portal by October 30, 2026, at 4:00 pm. The contract will be awarded to the lowest responsive bidder, with a 5% price preference applied for evaluation purposes to certified Orange County Local Small Businesses or Disabled Veteran Business Enterprises, up to a maximum deduction of $100,000. Awardees must provide a Faithful Performance Bond and a Labor and Material Payment Bond, and all personnel must undergo security clearance every twelve months. Payment terms are net 30 days following the written acceptance of work by the County Project Manager.

POSTED

DEADLINE

Ambulance Electrical System IntegrationThe Ambulance Electrical System Integration subcontract involves providing specialized electrical wiring and power distribution services for prime contractors working on Government of Yukon ambulance projects. The scope of work requires the installation of CSA/C-UL approved copper wiring protected by high-temperature looms rated at or above 149 degrees Celsius. Key technical components include the integration of auto-reset circuit breakers and dual 700 CCA battery systems equipped with 2000W charger/inverters. The successful contractor is responsible for delivering fully wired vehicles accompanied by comprehensive electrical documentation and detailed wire identification diagrams. This project falls under NAICS code 336211 and was posted on October 15, 2026, with a response deadline of November 12, 2026.

POSTED

DEADLINE

Supply and Deliver Two (2) Critical Care Ambulance to the Government of Yukon

Solicitation # RFB-2026-8-5520

The Government of Yukon is soliciting bids under solicitation number RFB-2026-8-5520 for the supply and delivery of two new and unused 2024 or newer Model Type III modular ambulances designed for critical care response. The contract requires the use of Chevrolet/GM, Dodge, or Ford chassis and mandates compliance with all current Canadian Motor Vehicle Safety Standards. Deliverables include the vehicles, complete owner's maintenance and service manuals, and a two to three hour operational hand-off to the Yukon EMS Fleet Coordinator. Delivery is required FOB Destination to Whitehorse, YT, by March 31, 2027. The contract will be awarded to the lowest priced bid that meets all supplementary evaluation criteria, with potential bid value reductions available for registered Yukon First Nation businesses. The supplier is responsible for all packaging, shipping, and handling costs. Technical requirements emphasize specific electrical labeling for ease of maintenance, color-coded wiring, and high-temperature loom ratings. Payment for undisputed invoices will be made in Canadian funds within 30 calendar days. Successful bidders must provide proof of insurance and a Workers' Safety and Compensation Board Letter of Compliance within specified timeframes following the notice of award.

POSTED

DEADLINE

Solicitation # SPE7L1-27-T-1606

Solicitation SPE7L1-27-T-1606 is a total small business set-aside request for quotations issued by the DLA Weapons Support Land Supply Chain for 78 units of lever action shock absorbers with coil springs, identified by NSN 2510-01-528-1547. The contract requires delivery to DLA Distribution San Joaquin in Tracy, California, with a delivery lead time of 374 days after award. The item is classified as a commercial product and must adhere to specific technical and quality requirements found in the DLA Master List, including compliance with SAE AS9003 or ISO 9001 standards. First Article Testing is required, with the test report due within 60 calendar days of the contract date. The procurement includes stringent packaging and marking requirements per MIL-STD-2073-1E and MIL-STD-129, specifically utilizing Packing Level A and Special Packaging Instruction AK15281547. Inspection and acceptance are both conducted at the origin. Due to the nature of the technical data, the contract is subject to ITAR and EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification. Additionally, the award is subject to the Buy American Act, the Berry Amendment, and CMMC Level 2 cybersecurity requirements. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Autonomous Vehicle Platform & Chassis IntegrationThis subcontract for the Department of Defense, specifically W6DV Peo M & S Redstone, involves the supply and modification of a mobile vehicle platform. The scope of work focuses on integrating autonomous drive-by-wire systems, reinforcing the chassis to handle launcher loads, and implementing autonomous munition resupply capabilities. Key technical requirements include an all-terrain autonomous chassis, drive-by-wire actuators, and GPS/INS navigation suites to deliver a fully integrated mobile autonomous vehicle platform. Due to the nature of the project, contractors must maintain a Secret security clearance and ensure full compliance with international biosecurity standards. The opportunity was posted on October 15, 2026, with a response deadline of October 23, 2026, falling under NAICS code 336211.

W6DV Peo M & S Redstone

POSTED

DEADLINE

Enforcer PUC Pumper SupplyThis subcontract agreement outlines the supply of a complete Enforcer PUC Pumper firefighting vehicle for prime contractors working on City of Clermont Fire Department procurement projects. The scope of work includes the manufacturing or sourcing of the chassis and body, as well as the integration of all necessary firefighting pumps, tanks, and apparatus to deliver one fully operational truck. To qualify for this contract, the provider must maintain valid Florida business licensure and carry at least 500,000 dollars in general liability insurance. Additionally, all employees involved in the project are required to undergo criminal background checks. The solicitation was posted on October 15, 2026, with a response deadline of October 22, 2026.

POSTED

DEADLINE

2026-28 2027 Ford 4 x 4 F550 2dr Mini Rescue Vehicle

Solicitation # PE-33306-NONST-2027-000000027

The Washington County Board of Commissioners is soliciting competitive bids for the procurement and delivery of a 2027 Ford 4x4 F550 2-door Mini Rescue vehicle for the Sandersville Fire Department. The preferred chassis is a 2027 Ford F550 XL 4-wheel drive featuring a 3/16 inch aluminum body with a fully welded sub-frame. The vehicle must adhere to specific dimensions, including a length of 24 feet, a height of 8 feet 4.5 inches, and a width between 96 and 100 inches. The prime manufacturer is responsible for the full integration of the cab, chassis, and body to ensure the apparatus functions as a complete unit. The vehicle must comply with current NFPA 1901 standards, with the specific exception of helmet storage. Performance requirements include the ability to accelerate to 35 mph within 25 seconds, a top speed of 50 mph when fully loaded, and a braking distance of 35 feet at 20 mph. Strict marking and labeling requirements are mandated, including occupancy limits, safety warnings, and CMVSS-compliant reflective markings. Bidders must provide detailed contractor specifications, color CAD drawings, and evidence of their capability to construct the vehicle and provide prompt service and replacement parts. Contract administration includes a mandatory pre-construction conference and a final inspection meeting at the manufacturer's location prior to delivery to the Sandersville Fire Department. The contractor is required to maintain significant insurance coverage, including 2 million dollars in commercial general liability and 5 million dollars in umbrella liability. Proposals must be submitted by November 23, 2026, and any deviations from the technical specifications must be explicitly listed as exceptions.

Washington County Board of Commissioners

POSTED

DEADLINE

SPRING ASSEMBLY, LEAF

Solicitation # SPE7L3-27-T-0879

Solicitation SPE7L3-27-T-0879 is a total small business set-aside for the procurement of 140 leaf spring assemblies, identified by NSN 2510000562174. The contract is issued by the DLA Weapons Support Land Supplier Operations and requires delivery to DLA Distribution San Joaquin in Tracy, California, by December 30, 2027. This is a critical application item requiring a First Article Test (FAT) and technical inspection at the actual manufacturing facility. The contractor must adhere to specific technical data packages and quality assurance provisions, including TDP and QAP 8389626, and maintain a quality system compliant with SAE AS9003 or ISO 9001. The contract mandates strict adherence to DLA packaging and marking requirements, specifically MIL-STD-129 and MIL-STD-2073-1E, with a mandatory requirement to immobilize the items. Sampling and inspection will be conducted at the origin according to MIL-STD-1916 or ASQ H1331. Key regulatory compliance includes the Buy American Act, the prohibition of Class I ozone-depleting chemicals, and the use of the Wide Area WorkFlow (WAWF) system for electronic invoicing. All quotes must be submitted via DIBBS, and the procurement is governed by NAICS code 336211.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

PARTS KIT, FLOOR, VEHICU

Solicitation # SPE7L3-27-T-0897

Solicitation SPE7L3-27-T-0897 is a total small business set-aside issued by the DLA Weapons Support Land Supplier Operations Vehicle Support for the procurement of 51 vehicular floor parts kits (NSN 2510-01-499-5138). The contract requires delivery to the New Cumberland facility in Pennsylvania, with a need ship date of July 14, 2027, and a final required delivery date of October 31, 2027. The acquisition is conducted under NAICS code 336211 and may be subject to automated award via the DIBBS system. Compliance requirements are stringent, necessitating that manufacturers adhere to SAE AS9003 or ISO 9001 quality standards. The contract mandates CMMC Level 2 certification and requires offerors to hold an approved JCP certification to access export-controlled technical data subject to ITAR or EAR. Quality assurance involves inspection and acceptance at origin, utilizing sampling methods such as MIL-STD-1916 or ASQ H1331. Packaging must comply with MIL-STD-2073-1E and DLA requirement RP001. Payment and invoicing are processed electronically through the Wide Area Workflow system.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

4 days ago

DEADLINE

in 8 days

View Details

More opportunities from Department of Energy → Western Area Power Administration

Same awarding agency

NAICS: 562111

New

Federal

Waste Collection and Disposal Services for Keswick Substation Western Area Power Administration Sierra Nevada Region.

Solid Waste Collection

POSTED

DEADLINE

Janitorial services for Northern California facilities - The Contractor shall provide all labor, management, supervision, materials, supplies, and equipment (except GFP) and shall plan, schedule, coo…

POSTED

DEADLINE

Maintenance Acquisition Support Services for Sierra Nevada Region (SNR)

POSTED

DEADLINE

S&C OPERATOR CAT#38846R5-B-KZ AND MARK V CAT# 657361R2-P5Z1 WITHOUT INSULATORS

Switchgear and Switchboard Apparatus Manufacturing

POSTED

DEADLINE

Heated Hangar Storage Space for WAPA Helicopter N617DE in Englewood, CO

Other Airport Operations

POSTED

DEADLINE

PowerSimulator transmission system operation training simulator software, training, and subscription for Western Area Power Administration (WAPA) Sierra Nevada Region (SNR) Dispatch Training.

Custom Computer Programming Services

POSTED

DEADLINE

LEKTRIEVERS and MOVABLE SHELVING UNITS MAINTENANCE SERVICE CONTRACT-BASE PLUS FOUR OPTION YEARS WESTERN AREA POWER ADMINISTRATION DESERT SOUTHWEST REGION

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

Construction Indefinite Delivery Indefinite Quantity Contract for Steel Pole Foundations for the Upper Great Plains and Rocky Mountain Regions of Western Area Power Administration. Period of Performa…

Power and Communication Line and Related Structures Construction

POSTED

DEADLINE

To acquire Genscape, Inc. PowerRT and PowerIQ subscriptions

POSTED

DEADLINE

CORELOGIC SOLUTIONS, ONLINE SERVICE FOR COUNTY PARCEL OWNERSHIP - Sierra Nevada Region, requires Real Quest software service to pull landowner information in order to provide timely notification of S…

Mortgage and Nonmortgage Loan Brokers

POSTED

DEADLINE

MMO REPLACE WRECKED 3095 ELLIOTT CRANE, EO 14398

Overhead Traveling Crane, Hoist, and Monorail System Manufacturing

POSTED

DEADLINE

UNINTERRUPTIBLE POWER SUPPLY (UPS) MAINTENANCE, WESTERN AREA POWER ADMINISTRATION, DESERT SOUTHWEST REGION, PHOENIX, AZ

Electronic and Precision Equipment Repair and Maintenance

POSTED

about 2 hours ago

DEADLINE

N/A

View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS