Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

BODY, CARGO TRAILER

Active
SPE7L4-26-T-5494Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of one BODY, CARGO TRAILER with NSN 2510-01-521-8067 under solicitation SPE7L4-26-T-5494, with a delivery requirement of 168 days after award. The item is subject to stringent technical and quality requirements as defined by the DLA Master List of Technical and Quality Requirements, with specific mandates including Configuration Change Management, Inspection and Acceptance at Origin, and the removal of government identification from non-accepted supplies. The contractor must comply with DLA packaging standards and tailored higher-level quality requirements applicable to both manufacturers and non-manufacturers. The product includes components governed by Qualified Products Lists or Qualified Manufacturers Lists, requiring strict adherence to qualification criteria outlined in procurement note H02. Technical data associated with this item is subject to export control under ITAR or EAR, restricting disclosure to foreign persons regardless of location, and access is limited to contractors with approved US/Canada Joint Certification Program status, completion of mandatory DOD export control training, and prior authorization from DLA. The contractor must also maintain Cybersecurity Maturity Model Certification Level 2 as a certified third-party assessment organization. The place of performance is specified as New Cumberland, PA, with a response deadline of July 20, 2026, and all contractual obligations are governed by applicable DFARS clauses including those on export control and cybersecurity.

General Info

One BODY CARGO TRAILER solicited by DLA via DIBBS, due July 20, 2026, NSN 2510-01-521-8067

Agency

Department Of Defense → LSO COMBAT VEHICLES AND ARMAMENTView Agency

NAICS

336211 - Motor Vehicle Body ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

SBA

Documents

(1)

SPE7L4-26-T-5494.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update
PhaseSolicitation
Posted

Solicitation

Amendment 1

Contract was updated

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LSO COMBAT VEHICLES AND ARMAMENT
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LSO COMBAT VEHICLES AND ARMAMENT
View Agency Profile
Office AddressUS
Contacts
ANNA-RACHELLE BETTS
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BODY,CARGO TRAILER
BODY, CARGO TRAILER
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD002, COVERED DEFENSE INFORMATION APPLIES
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ016: COMPONENT QUALIFIED PRODUCTS LISTS (QPL)/QUALIFIED MANUFACTURERS
LISTS (QML). THIS ITEM CONTAINS ONE OR MORE COMPONENTS DEFINED BY A
SPECIFICATION(S) WITH AN ASSOCIATED QUALIFIED PRODUCTS LIST (QPL) OR
QUALIFIED MANUFACTURERS LIST (QML). QUALIFICATION REQUIREMENTS IN
PROCUREMENT NOTE H02 "COMPONENT QUALIFIED PRODUCTS LIST (QPL)/QUALIFIED
MANUFACTURERS LIST (QML)" APPLY.
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national
SPE7L4-26-T-5494
SECTION B
employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 2510-01-521-8067 Quantity: 1 EA Purchase Request: 7017437825QTY: 1 Delivery: 168 days ADO

Similar Contracts

NAICS: 336211
New
Federal
801 RHG OLA Water TankerThis solicitation, titled 801 RHG OLA Water Tanker and assigned solicitation number F4ATD16160AQ02, is a Total Small Business Set-Aside under FAR 19.5 for a firm fixed price contract aimed at procuring a 6,000-gallon water tanker kit and associated services for installation on a government-owned Caterpillar CAT 730 articulated truck chassis. The requirement is strictly for a full package delivery including the tank body and spray system (CLIN 0001), complete turnkey installation onto the chassis (CLIN 0002), and comprehensive initial operator training for personnel of the 801st RED HORSE Training Squadron (CLIN 0003). The solicitation is non-severable and non-responsive bids will be rejected if the entire package is not quoted. Vendors must be registered in the System for Award Management (SAM) with a valid Unique Entity ID and CAGE code, and only small businesses under the NAICS code 336211 with a size standard of 1,000 employees are eligible to respond. The water tanker must be constructed of heavy-duty carbon or mild steel plate with internal longitudinal and transverse baffles, and the integrated spray system must include rear, side, and front spray bars, a remote-controlled water cannon, and a hose reel, all operating at a minimum flow rate of 1,000 to 1,250 GPM via a hydraulically driven centrifugal pump. Delivery is required at Nellis Air Force Base, Nevada, within 60 days after award, with inspection and acceptance occurring at the destination under FOB Destination terms. The vendor assumes full responsibility for all logistics, shipping, and transportation costs, either by delivering the complete kit directly to Nellis AFB for on-site installation or by transporting the government-owned CAT 730 truck to the vendor’s certified facility for integration and then returning the completed vehicle to Nellis AFB. Acceptance is contingent upon successful completion of a 100% leak test at maximum capacity, full functional verification of all spray components and controls, provision of technical manuals for the system and its components, and completion of operator training. The contract incorporates mandatory clauses from FAR and DFARS, including provisions for electronic invoicing via Wide Area WorkFlow, Buy American compliance, prohibitions on business with the Maduro regime and entities operating in Xinjiang
FA4861 99 Cons Lgc

POSTED

about 20 hours ago

DEADLINE

in 16 days
View Details
NAICS: 336211
New
DIBBS
SCREEN, COOLERThe contract pertains to the procurement of SCREEN, COOLER with NSN 2510-01-433-8705 and part numbers 388010050-2 and E9AR106-078-2, totaling 102 units at a unit price of $7017437872 and a total price of $102.00. Delivery is required within 168 days FOB origin, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129, with all DLA Master List of Technical and Quality Requirements taking precedence. The item is classified as a critical application item, and government identification must be removed from any non-accepted supplies. The contract references RP001 for packaging standards and mandates palletization per DLA procurement guidelines. Transportation details are governed by DLAD PROC NOTE C19 and C20, with delivery addressed to DLA Distribution Anniston at 7 Frankford Ave, Building 362, Anniston, AL 36201-4199. The original delivery date is April 10, 2027, with a need ship date of January 5, 2027. The solicitation number is SPE7L4-26-T-5499, issued under NAICS 336211 by the Department of Defense, with primary point of contact Anna-Rachelle Betts.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

5 days ago

DEADLINE

in 6 days
View Details
NAICS: 336211
New
DIBBS
SPRING ASSEMBLY, CLUTCHThe contract is for the procurement of 70 units of Spring Assembly, Clutch, identified by NSN 2520-01-360-8092 and part number 23045586, with delivery required within 168 days from the contract award, FOB origin, and inspection and acceptance occurring at the destination. The item is designated as a critical application item and must be sourced exclusively from approved suppliers including AMZ Alabama Inc., BAE Systems Tactical Vehicle Systems LP, and Allison Transmission Inc. Strict adherence to国防部 technical and quality requirements referenced in the DLA Master List is mandated, with sampling governed by MIL-STD-1916 or ASQ H1331 Table 1 using a zero-defect acceptance criterion unless otherwise specified. Attribute classifications must align with verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 for critical, major, and minor characteristics respectively. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including the use of preservation method 33 and material 49 to prevent corrosion on all bare metal surfaces, with unit containers designed to immobilize the item and prevent damage. Package marking must follow standard protocols with no special marking codes required. Palletization and shipping must conform to DLA packaging guidelines and hazardous materials procedures outlined in IP025. Shipment is directed to the DLA Distribution facility in New Cumberland, Pennsylvania, with a required ship date of January 5, 2027, and an original delivery deadline of December 18, 2026. The contract prohibits the use of Class I ozone-depleting chemicals in any component, overriding any conflicting specification provisions, and requires substitution approval unless explicitly permitted. All deliveries are subject to a zero percent quantity variance, and the unit of issue is each, consistent with DoD standards.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

5 days ago

DEADLINE

in 6 days
View Details
NAICS: 336211
New
DIBBS
FENDER, VEHICULARThe item is a vehicular fender with NSN 2510-00-930-2037, quantity of twelve units, under purchase request 7017444052, with delivery required within twenty days after contract award. The technical data associated with this item is subject to export control under either ITAR or EAR, meaning any disclosure or transfer of this data to foreign persons—regardless of location—is prohibited without prior authorization from the Department of State or Department of Commerce. This restriction extends to foreign national employees and subsidiaries of U.S. companies. Access to the controlled data is strictly limited to DLA contractors who hold an approved US/Canada Joint Certification Program certification, have completed mandatory DOD export control training, and have submitted and been approved on the DLA Export-Controlled Technical Data Questionnaire. The solicitation number is SPE7L1-26-T-821U, issued by the Department of Defense’s Land Supply Chain under NAICS code 336211, with a response deadline of July 20, 2026, and a posting date of July 9, 2026. Primary point of contact is Kristina Derry at DLA, reachable via email and phone provided.
LAND SUPPLY CHAIN

POSTED

5 days ago

DEADLINE

in 6 days
View Details
NAICS: 336211
New
DIBBS
BOOT, DUST AND MOISTUREThe contract pertains to the supply of a BOOT, DUST AND MOISTURE SEAL with NSN 5930-01-383-2606, requiring 261 units to be delivered within 119 days under solicitation SPE7M8-26-T-5322. All items must comply with stringent technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, including prohibition of Class I ozone depleting chemicals and adherence to a non-extendable 36-month shelf life for Type I (Code Q) items. Packaging must follow MIL-STD-2073-1E and MIL-STD-129 with special marking indicating Type I shelf life, and palletization must meet DLA Packaging Requirements. Items are to be delivered FOB Origin, with inspection and acceptance occurring at the point of origin, and no quantity variance is permitted. The designated delivery point is the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation logistics must align with DLAD Proc Notes C19 and C20. The product must conform to Technical Data Package Rev A Gen 1 against Reference Drawing 19207 12412330, and any configuration changes require formal engineering change proposals or variance requests. The contract also prohibits the use of unauthorized substitute chemicals and mandates prior approval for any deviations. The original required delivery date is January 12, 2027, with an actual need ship date of February 12, 2026, and the solicitation closed on July 20, 2026.
ELECTRICAL DEVICES DIV

POSTED

5 days ago

DEADLINE

in 6 days
View Details